mgcl2 is a strong electrolyte that dissociates into 3 ions according to the balanced dissociation equation below. what is the total ionic concentration of 0.311 m mgcl2?

We need 0.0161 liters of the 2.07 M sulfuric acid solution to make 57 milliliters of a 0.58 M solution of sulfuric acid.

We need to use the formula:

C1V1 = C2V2

Where

We want to find the volume of the 2.07 M sulfuric acid solution needed to make 57 milliliters of a 0.58 M solution. Let's plug in the values we know:

2.07 M * V1 = 0.58 M * 57 mL

Simplifying the equation, we get:

V1 = (0.58 M * 57 mL) / 2.07 M

V1 = 16.0874 mL

To convert the volume to liters, we divide by 1000:

V1 = 16.0874 mL / 1000 mL/L

V1 = 0.0161 L

Therefore, we need 0.0161 liters of the 2.07 M sulfuric acid solution to make 57 milliliters of a 0.58 M solution of sulfuric acid.

Learn more about concentration here : brainly.com/question/28564792

#SPJ1

Answer:

combustion

respiration by humans

Explanation:

burning of wood leaves release carbon dioxide which is a green house gas and detrimental to the climate

The correct option is C. Offspring are genetically different from their parents is an advantage of sexual reproduction over asexual reproduction

More variations are formed during sexual reproduction. As a result, more species will survive in a population. The newly produced people exhibit traits from both parents. It causes genetic variances, which encourage character variety.

The two ways that organisms reproduce are asexually and sexually. Male and female gametes do not combine during asexual reproduction. In bacteria, amoebas, hydra, etc., this occurs. Male and female gametes are fused during sexual reproduction, which occurs in both humans and many other animals.

To know more about advantage visit:-

https://brainly.com/question/24494907

#SPJ1

The final molarity of zinc cation in the solution is 0.0122 M.

Assuming complete dissociation of zinc chloride, we can write the balanced chemical equation as:

[tex]ZnCl_2 (aq) + K_2CO_3 (aq) - > Zn_2+ (aq) + 2K+ (aq) + 2Cl- (aq) + (CO_3) ^{2-} (aq)[/tex]

First, we need to calculate the moles of zinc chloride present in the solution:

moles of ZnCl2 = (0.25 g / 136.30 g/mol) = 0.001833 mol

Since 1 mole of ZnCl2 produces 1 mole of Zn2+, the final molarity of zinc cation in the solution will be:

Molarity of [tex]Zn_{2+[/tex]= moles of [tex]Zn_{2+[/tex]

volume of solution in liters moles of Zn2+ = 0.001833 mol

volume of solution = 0.150 L

Molarity of Zn2+ = 0.001833 mol / 0.150 L = 0.0122 M.

For such more questions on Zinc chloride:

https://brainly.com/question/20689567

#SPJ11

For every 60 grammes of ethane, 108 grammes of water are produced. We therefore obtain 10.8 g of water from the combustion of 6 g of ethane. As a result, is created in 0.6 moles.

The mole fraction of the solvent must be multiplied by the partial pressure of the solvent in order to determine an ideal solution's vapour pressure. The vapour pressure would be 2.7 mmHg, for example, if the mole fraction is 0.3 and the partial pressure is 9 mmHg.

One mol of the solute is contained in one thousand grammes of the solvent (water) in a one molal solution. It follows that the solution's vapour pressure is 12.08 kPa.

learn more about mole fraction

https://brainly.com/question/29367909

#SPJ1

The correct answer is option B. Equilibrium Favors the Products. Equilibrium is a state of balance in which the concentrations of reactants and products remain constant over time.

The concentrations of the reactants and products do not change in a substitution reaction once it has reached equilibrium.

This indicates that the forward response rate and the reverse reaction rate are equal. In this situation, the reaction favours the production of the products over the reactants since the equilibrium favours the products.

This indicates that the forward reaction is occurring at a faster rate than the reverse reaction.

As a result, the equilibrium will favour the products, and their concentrations will be higher than those of the reactants.

Complete Question:

Select  the best possible answer to this question:

Which of the following best describes the equilibrium of this substitution reaction?

A. Equilibrium favors the reactants

B. Equilibrium favors the products

C. Equilibrium is unaffected

D. Equilibrium is reversed

To learn more about Equilibrium visit:

https://brainly.com/question/23121462

#SPJ4

Systematic name of this structure is 3-ethylpentane.

Chemical compounds known as isomers have identical chemical formulae but have different properties and atom arrangements inside the molecule. The term "isomer" refers to a substance that exhibits isomerism.

Structural isomers are substances with the same molecular formula but distinct atomic configurations. The way the atoms are attached in this instance is quite different, as seen by the different types of chains that are formed (straight versus branched), the placements of the atoms (such as middle versus end of the parent chain), and the presence of functional groups (e.g., aldehydes versus ketones).

For instance, although sharing the same molecular formula (C3H6O), propanal and propanone have very distinct chemical structures. They are structural isomers as a result.

Isomers of Heptane are:

To learn more about isomers, refer:

brainly.com/question/12796779

#SPJ4

The complete question is: The alkane C7H16 exhibits structural isomerism. In fact, 9 structural isomers have this same formula (but different bond arrangements). One such isomeric structure is: What is the correct systematic name for this structure?

The first ores that were widely smelted by humans to produce metal were those of copper, option .

Ore is a naturally occurring rock or silt that includes precious minerals that are concentrated above background levels and may be mined, processed, and sold profitably. Metals are the most common valuable minerals found in ore. The concentration of the desired ingredient in an ore is referred to as its grade.

To decide if a rock has a high enough grade to be worth mining and is thus regarded as an ore, the value of the metals or minerals it contains must be evaluated against the expense of extraction. An ore that contains many precious minerals is said to be complex. Typically, oxides, sulphides, silicates, or native metals like copper or gold are the minerals of interest.

Learn more about Ores:

https://brainly.com/question/28635854

#SPJ4

The first ores that were widely smelted by humans to produce metal were those of copper.

Metals are a crucial part of the history of mankind and cannot be left out. In fact, it was quite common for historians to describe particular historical eras using metals that were in use at the time. The Stone Age, Bronze Age, and Iron Age, among others, all existed. One of the metals that man has used since very ancient times is copper. In actuality, copper was the first metal that man ever discovered, in the year 9000 BCE. Gold, silver, tin, lead, and iron were also used in prehistoric times.

Chemically speaking, copper is an element known as Cuprum. Cu is its chemical symbol. Cuprum, a Latin word, literally translates as "from the island of Cyprus." Its colour is a reddish-brown metal.

Visit here to learn more about  copper : https://brainly.com/question/2289251
#SPJ11

To solve this problem, we can use the Ideal Gas Law, which states that  the pressure inside the flask is 0.768 atm, rounded to the nearest thousandth.

A gas is a state of matter in which a substance has no fixed shape or volume and can expand indefinitely to fill any container in which it is placed. Gases are made up of molecules or atoms that are in constant, random motion and have no long-range order or cohesion.

Gases are compressible, meaning that their volume can be reduced by applying pressure, and they can also expand to fill any available space. The properties of gases are described by gas laws, which relate variables such as temperature, pressure, and volume.

Examples of gases include oxygen, nitrogen, carbon dioxide, and hydrogen. Gases are found in a wide range of natural and human-made environments, including the atmosphere, industrial processes, and many chemical reactions.

To know more about Gas visit :

https://brainly.com/question/3637358

#SPJ1

Neither A, B, C nor D. The equilibrium position will not be affected by the change in volume.

To determine how the equilibrium of the reaction 2 NO(g) + Cl₂(g) ⇌ 2 NOCl(g) will shift if the volume of the container is decreased by one-half, we first need to calculate the reaction quotient Q.

The balanced chemical equation for the reaction is:

2 NO(g) + Cl₂(g) ⇌ 2 NOCl(g)

At equilibrium, the concentrations of the species are:

[NO] = 0.050 M

[Cl2] = 0.050 M

[NOCl] = 0.50 M

Using these values, we can calculate the value of the reaction quotient Q:

Q [tex]= [NOCl]^2 / ([NO]^2[Cl2])[/tex]= [tex](0.50)^2 / ((0.050)^2 x 0.050)[/tex] = 1000

Now we compare the value of Q to the equilibrium constant Kc:

Kc =[tex][NOCl]^2 / ([NO]^2[Cl2])[/tex] = 2000

Since Q < Kc, we can conclude that the reaction has not yet reached equilibrium and that the forward reaction will proceed to reach equilibrium.

When the volume of the container is decreased by one-half, the concentration of all species will increase due to the decrease in volume. According to Le Chatelier's principle, the reaction will shift in the direction that reduces the total number of moles of gas.

In this case, the reaction produces two moles of gas on the left-hand side and two moles of gas on the right-hand side, so the total number of moles of gas does not change. Therefore, the volume change will not have an effect on the equilibrium position.

Learn more about  equilibrium here:

https://brainly.com/question/30807709

v

#SPJ11

The correct answer is: C. Q = 1000, and the reaction will proceed toward reactants.

To determine which statement is true if the volume of the container is decreased by one-half, we need to calculate the reaction quotient (Q) for the new conditions.

When the volume is decreased by half, the concentrations of all species will double:

NO(g): 0.050 * 2 = 0.100 M
Cl2(g): 0.050 * 2 = 0.100 M
NOCl(g): 0.50 * 2 = 1.00 M

Now, calculate Q using the new concentrations:

Q = [NOCl]^2 / ([NO]^2 * [Cl2])
Q = (1.00)^2 / ((0.100)^2 * (0.100))
Q = 1 / 0.001
Q = 1000

So, Q = 1000. Now, compare Q to Kc:

Q > Kc, meaning the reaction will proceed toward the reactants to reach equilibrium.

To know more about Reaction Quotient:

https://brainly.com/question/24202150

#SPJ11

The dilution ration is 1÷10 (1 drop of concentrated solution in 10 drops of diluted solution).

If we do that 4 times we repeat the same dilution with the same dilution ratio of 1÷10 (numerically is 0,1). Therefore we can multiply the solution ratio by itself 4 times.

0,1⁴ = 10^-4

This means that we end up with a solution which concentration is 10^-4 times the beginning concentration. Therefore the final concentration is

40 000 ppm × 10^-4 = 4ppm

PS: we can do this because we have the same unit of measurement for the volumes of both the concentrated solution and the diluted one (drops)

At the given temperature, the equilibrium constant K for the reaction is 0.5625 mol/L.

The balanced chemical equation for the reaction is:

2NH₃(g) ⇌ 3H₂(g) + N₂(g)

The equilibrium expression for the reaction is:

K = [H₂]³[N₂] / [NH₃]²

Given that 5.0 moles of NH₃ were introduced into a 5.0 L reaction chamber, the initial concentration of NH₃ is:

[NH₃]₀ = 5.0 mol / 5.0 L = 1.0 mol/L

At equilibrium, 80.0% of the NH₃ had reacted, which means that 20.0% of NH₃ remains. Therefore, the equilibrium concentration of NH₃ is:

[NH₃] = 0.20 x 1.0 mol/L = 0.2 mol/L

The equilibrium concentrations of H₂ and N₂ can be calculated from the balanced equation:

[H₂] = (3/2) x [NH₃] = 0.3 mol/L

[N₂] = [NH₃] / 2 = 0.1 mol/L

Substituting these values into the equilibrium expression gives:

K = [H₂]³[N₂] / [NH₃]²

K = (0.3 mol/L)³ x (0.1 mol/L) / (0.2 mol/L)²

K = 0.5625 mol/L

Therefore, the equilibrium constant K for the reaction at the given temperature is 0.5625 mol/L.

Find out more on equilibrium constant here: https://brainly.com/question/19340344

#SPJ1

The amino acid that contains the R groups that are hydrophobic are the non - polar.

The Amino acids are the building blocks of the molecules of the  proteins. These contains the one hydrogen atom and the one amine group, the one carboxylic acid group and the one side chain that is the R group will be attached to the central carbon atom.

The side chains of the non polar amino acids includes the long carbon chains or the carbon rings, which makes them bulky. These are the hydrophobic, that means they repel the water. Therefore the non-polar amino acids are the hydrophobic.

To learn more about amino acid here

https://brainly.com/question/12788134

#SPJ4

The number of moles of acid and base that react depends on the stoichiometry of the chemical reaction and the amounts of reactants used

Without additional information about the chemical reaction or system being referred to, we cannot determine the number of moles of acid and base that reacted.

If we assume that the orange spheres represent sulfate ions in a specific reaction, then we would need to know the stoichiometry of the reaction to determine the number of moles of acid and base that reacted.

For example, if the reaction involved sulfuric acid ([tex]H_2SO_4[/tex]) and sodium hydroxide (NaOH) and the orange spheres represent sulfate ions ([tex](SO_4)^{2-[/tex]), then the balanced chemical equation would be:

[tex]H_2SO_4 + 2NaOH - > Na_2SO_4 + 2H_2O[/tex]

In this case, we would need to know the amount of sodium hydroxide used to determine the number of moles of acid and base that reacted. If we know the number of orange spheres representing sulfate ions and the amount of sodium hydroxide used, we can determine the moles of acid and base that reacted.

For such more questions on Stoichiometry:

https://brainly.com/question/30417834

#SPJ11

To calculate the energy carried by one mole of photons of green light emitted by a fluorescent proflavine molecule at 514 nm, we'll use the energy formula: [tex]E = h * c /\lambda[/tex] where E is the energy of a single photon, h is Planck's constant ([tex]6.626 *10^{-34} Js[/tex]), c is the speed of light ([tex]2.998 * 10^8 m/s[/tex]), and λ is the wavelength (514 nm).

First, convert the wavelength to meters:

[tex]514 nm = 514 * 10^{-9} m[/tex].
Next, calculate the energy of a single photon:

[tex]E = (6.626 * 10^{-34} Js) * (2.998 * 10^8 m/s) / (514 * 10^{-9} m) = 3.872 * 10^{-19} J.[/tex]
Now, to find the energy carried by one mole of photons, multiply the energy of a single photon by Avogadro's number ([tex]6.022 x 10^{23[/tex]):
Energy per mole =[tex](3.872 *10^{-19 }J) * (6.022 * 10^{23}) = 233.0 kJ.[/tex]
Thus, one mole of photons of green light emitted by a fluorescent proflavine molecule at 514 nm carries 233.0 kJ of energy.

Learn more about fluorescent here:

https://brainly.com/question/24228588

#SPJ11

The number of moles of H₂ that can be produced from x grams of Mg is (x / 24.31)

The balanced chemical equation for the reaction between Mg and HCl is,

Mg + 2HCl → MgCl₂ + H₂

This equation shows that 1 mole of Mg reacts with 2 moles of HCl to produce 1 mole of H₂. Therefore, the number of moles of H₂ that can be produced from x grams of Mg can be calculated as follows:

Calculate the number of moles of Mg in x grams:

Number of moles of Mg = mass of Mg / molar mass of Mg

Number of moles of Mg = x / 24.31

Use the mole ratio between Mg and H₂ to calculate the number of moles of H₂ produced:

Number of moles of H₂ = Number of moles of Mg × (1 mole of H₂ / 1 mole of Mg)

Number of moles of H₂ = (x / 24.31) × (1/1)

To know more about moles, here

brainly.com/question/26416088

#SPJ4

The amount of time taken to produce 10 g Bi by the electrolysis of a BiO solution using a current of 25 A is 9.2 minutes.

Direct electric current is used in the electrolysis process to accelerate chemical reactions that would not naturally occur. As a step in the electrolytic cell-based separation of elements from naturally existing sources like ores, electrolysis is significant from a commercial standpoint.

In BiO+, Bi has an oxidation number of 3+, so it’ll take 3 moles of electrons per mole of Bi.

10.0 g Bi x 1 mole/209g = 0.0478 moles Bi

0.0478 moles Bi x 3 moles electrons/mol Bi = 0.1434 moles electrons

0.1434 mol e- x 96,485 C/mole = 13836 Coulombs

1 C = 1 amp/sec

13836 C = 25 A x time

time = 553 seconds = 9.2 minutes

To produce the bio solution using a current is 9.2 minutes.

Learn more about electrolysis :

https://brainly.com/question/31358933

#SPJ4

It would take approximately 185 seconds, or just over 3 minutes, to produce 10.0 g of bismuth by the electrolysis of a bio solution using a current of 25.0 A.

To determine the time it would take to produce 10.0 g of bismuth by the electrolysis of a bio solution using a current of 25.0 A, we need to use Faraday's law.

First, we need to find the number of moles of bismuth required to produce 10.0 g. The molar mass of bismuth is 208.98 g/mol, so:

10.0 g Bi / 208.98 g/mol = 0.0478 mol Bi

Next, we can use Faraday's law, which states that the amount of product produced is proportional to the amount of charge (in Coulombs) passed through the solution. The equation is:

moles of product = (charge in Coulombs) / (Faraday's constant)

where the Faraday's constant is 96,485 C/mol e-.

We can rearrange this equation to solve for the charge:

charge = (moles of product) x (Faraday's constant)

Plugging in the values we found earlier, we get:

charge = 0.0478 mol Bi x 96,485 C/mol e- = 4,632 C

Finally, we can use the formula for current:

current = charge / time

Rearranging this equation to solve for time, we get:

time = charge / current

Plugging in the values we found earlier, we get:

time = 4,632 C / 25.0 A = 185 s

To learn more about molar mass click here

brainly.com/question/22997914

#SPJ11

For the voltaic cell with nickel and iron electrodes, the shorthand notation is:
Ni(s)|Ni2+(aq)||Fe3+(aq)|Fe(s)

To calculate the standard free-energy change at 25°C for the reaction Mg2+(aq) + Zn(s) → Mg(s) + Zn2+(aq), we need to use the formula:

ΔG° = -nFE°
where ΔG° is the standard free-energy change, n is the number of moles of electrons transferred, F is Faraday's constant (96,485 C/mol), and E° is the standard cell potential.

Step 1: Determine the half-reactions and their standard reduction potentials.
Mg2+(aq) + 2e- → Mg(s)  E° = -2.37 V
Zn2+(aq) + 2e- → Zn(s)  E° = -0.76 V

Step 2: Determine the overall cell potential.
E°(cell) = E°(reduction) - E°(oxidation)
E°(cell) = (-0.76 V) - (-2.37 V) = 1.61 V

Step 3: Calculate the standard free-energy change.
ΔG° = -nFE°
ΔG° = -2 mol e- * 96,485 C/mol e- * 1.61 V
ΔG° = -310.44 kJ/mol

The standard free-energy change for this reaction at 25°C is -310 kJ/mol (rounded to three significant figures).

For the voltaic cell with Zn(s) and Al(s) electrodes, the spontaneous reaction is:
2 Al + 3 Zn2+ → 3 Zn + 2 Al3+

For the voltaic cell with nickel and iron electrodes, the shorthand notation is:
Ni(s)|Ni2+(aq)||Fe3+(aq)|Fe(s)

To know more about voltaic cell :

https://brainly.com/question/1370699

#SPJ11

For the voltaic cell with nickel and iron electrodes, based on the standard reduction potentials of Ni2+ and Fe3+, the shorthand notation for this voltaic cell is:
Ni(s)|Ni2+(aq)||Fe3+(aq)|Fe(s)

To calculate the standard free-energy change at 25°C for the reaction Mg2+(aq) + Zn(s) → Mg(s) + Zn2+(aq), we can use the following equation:
ΔG° = -nFE°
Where ΔG° is the standard free-energy change, n is the number of moles of electrons transferred in the reaction, F is Faraday's constant (96,485 C/mol), and E° is the standard cell potential.
First, we need to determine E°. We do this by looking up the standard reduction potentials for both half-reactions:
Mg2+(aq) + 2e- → Mg(s)  E° = -2.37 V
Zn2+(aq) + 2e- → Zn(s)  E° = -0.76 V
We can find the overall E° by subtracting the reduction potential of the reaction we need to reverse (Zn(s) → Zn2+(aq) + 2e-):
E° = -2.37 V - (-0.76 V) = -1.61 V
In this reaction, n = 2 since there are 2 moles of electrons transferred. Now we can calculate ΔG°:
ΔG° = -2 × 96,485 C/mol × (-1.61 V) = 310 kJ/mol (rounded to three significant figures)
For the voltaic cell with Zn(s) and Al(s) electrodes, the spontaneous reaction is:
2 Al + 3 Zn2+ → 3 Zn + 2 Al3+
For the voltaic cell with nickel and iron electrodes, based on the standard reduction potentials of Ni2+ and Fe3+, the shorthand notation for this voltaic cell is:
Ni(s)|Ni2+(aq)||Fe3+(aq)|Fe(s)

learn more about electrodes here

https://brainly.com/question/17060277

#SPJ11

The theoretical yield of phenacetin is 0.17922 g. However, the actual yield may be lower due to factors such as incomplete reaction, loss during purification, or experimental error.

To calculate the theoretical yield of phenacetin, we need to first determine the limiting reagent. The limiting reagent is the reactant that will be completely consumed in the reaction, thus limiting the amount of product that can be produced.

First, we need to convert the volume of bromoethane given in milliliters to grams, using its density:

0.12 ml x 1.47 g/ml = 0.1764 g bromoethane

Next, we can use the molar masses of p-acetamidophenol and bromoethane to determine the number of moles of each:

moles p-acetamidophenol = 0.151 g / 151.16 g/mol = 0.001 mol

moles bromoethane = 0.1764 g / 108.97 g/mol = 0.00162 mol

Since the reaction requires a 1:1 molar ratio of p-acetamidophenol to bromoethane, and the number of moles of p-acetamidophenol is smaller than the number of moles of bromoethane, p-acetamidophenol is the limiting reagent.

The theoretical yield of phenacetin can be calculated using the molar mass of phenacetin and the number of moles of p-acetamidophenol:

moles phenacetin = 0.001 mol p-acetamidophenol

mass phenacetin = 0.001 mol x 179.22 g/mol = 0.17922 g

For such more questions on Phenacetin:

https://brainly.com/question/29460577

#SPJ11

1. The mole of the solute is 0.8675 mole

2. The volume (in L) of the solution is 0.25 L

3. The molarity of the solution is 3.47 M

The mole of the solute, NaOH can be obtained as follow:

Mole = mass / molar mass

Mole of solute, NaOH = 34.7 / 40

Mole of solute, NaOH = 0.8675 mole

The volume (in L) can be obtain as follow:

1000 mL = 1 L

Therefore,

250 mL = 250 / 1000

250 mL = 0.25 L

Thus, the volume (in L) is 0.25 L

The molarity of the solution can be obtain as follow:

Molarity of solution = mole / volume

Molarity = 0.8675 /  0.25

Molarity = 3.47 M

Thus, we can conclude that the molarity of the solution is 3.47 M

Learn more about molarity:

https://brainly.com/question/16073358

#SPJ1

The pH of the solution after 23.0 mL of 0.25 M HCl have been added to the 35.0 mL of 0.20 M LiOH is 12.74.


1. Calculate the initial moles of LiOH and HCl:
  LiOH: 35.0 mL * 0.20 mol/L = 7.00 mmol
  HCl: 23.0 mL * 0.25 mol/L = 5.75 mmol

2. Determine the limiting reactant and find the moles of unreacted LiOH:
  Since HCl is the limiting reactant, subtract its moles from LiOH moles:
  7.00 mmol - 5.75 mmol = 1.25 mmol of unreacted LiOH

3. Calculate the new concentration of LiOH in the solution:
  Total volume: 35.0 mL + 23.0 mL = 58.0 mL
  New concentration: 1.25 mmol / 58.0 mL = 0.02155 mol/L

4. Calculate the pOH of the solution:
  pOH = -log10(0.02155) = 1.66

5. Find the pH of the solution:
  pH = 14 - pOH = 14 - 1.66 = 12.74

To know more about pH click on below link:

https://brainly.com/question/491373#

#SPJ11

0.0074 mol of nitronium ion is needed to react with 1 g of acetanilide

To determine the amount of nitronium ion needed for the reaction with 1 g of acetanilide, we will first calculate the moles of acetanilide and then apply stoichiometry.

Given that the molecular mass of acetanilide is 135.17 g/mol, we can calculate the moles of acetanilide:

moles = mass / molecular mass
moles = 1 g / 135.17 g/mol ≈ 0.0074 mol

Now, we need to determine the stoichiometry of the reaction between acetanilide and nitronium ion. Assuming the reaction is a 1:1 ratio (i.e., one mole of acetanilide reacts with one mole of nitronium ion), the amount of nitronium ion needed would be the same as the moles of acetanilide.

Thus, approximately 0.0074 mol of nitronium ion is needed to react with 1 g of acetanilide. Remember to consider the reaction's stoichiometry when applying this calculation to other scenarios or chemical reactions.

Know more about stoichiometry here:

https://brainly.com/question/14420683

#SPJ11  

Precautions when adding water to rock salt: Add water slowly and carefully to avoid splashing ; Precautions during filtration stage: Use filter paper that fits the funnel properly ; Precautions during (i) evaporation to dryness and (ii) crystallization: Avoid overheating solution during evaporation and stirring the solution.

Physical process by which a liquid substance is transformed into  gaseous state is called evaporation.

Precautions and their explanations:

Precautions when adding water to rock salt:

Add water slowly and carefully to avoid splashing or spilling.

Use a stirring rod to dissolve salt crystals completely.

Explanation: Rock salt can be quite reactive with water, and adding too much water too quickly can cause the solution to boil or splatter. Using a stirring rod helps to dissolve salt crystals completely without creating too much agitation.

Precautions during filtration stage:

Use a filter paper that fits the funnel properly and fold it properly.

Avoid touching filter paper with your fingers.

Explanation: The filter paper needs to fit the funnel properly to ensure that all of the liquid is filtered properly.

Precautions during (i) evaporation to dryness and (ii) crystallization:

Avoid overheating solution during evaporation and stirring the solution.

Use a clean glass rod to encourage crystallization and avoid scratching the walls of the container.

Explanation: Overheating the solution can cause the salt to decompose or change its chemical properties. Stirring the solution can also lead to the formation of smaller crystals.

To know more about evaporation, refer

https://brainly.com/question/9339710

#SPJ1

It depends on what you meant by saying not visible. Of it is not visible by using accurate measuring equipment then I think so, but if you mean that all transparent water is drinkable, then no. Think about this. When you put salt in water, you can't see it but it is still there: if you taste the water you can tell that there's salt in there. Let's say that instead of salt there are some bacteria, or some other type of salt which is not appropriate to drink at high levels, such as nitrates. I personally wouldn't recommend drinking from any type.of water unless you are not sure about its purity

Multiplying the slope (-2905 k) by the gas constant (0.008314 kJ/mol K) gives the activation energy: 24.1 kJ/mol.

The slant of the best-fit line for the diagram of ln(k) versus 1/T is equivalent to - Ea/R, where Ea is the actuation energy for the response, R is the gas consistent, and T is the temperature in Kelvin. To decide the actuation energy, we really want to improve this condition to address for Ea.

Ea = - slant x R

We realize that the slant of the best-fit line is - 2905 K, and R is 8.314 J/(mol·K). In any case, the slant should be changed over completely to units of J/(mol·K) by duplicating by 1000, since we need the actuation energy in units of kJ/mol. Accordingly:

Ea = - (- 2905 K x 8.314 J/(mol·K)) x (1/1000 kJ/J)

Ea = 24.1 kJ/mol

The initiation energy for the response is 24.1 kJ/mol. This worth addresses the base energy expected for the reactants to defeat the energy hindrance and structure items. The higher the initiation energy, the more slow the response rate, as well as the other way around.

To learn more about activation energy , refer:

https://brainly.com/question/30578051

#SPJ4

The molar mass of the unknown gas is 27.0 g/mol.

According to the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. At STP, the pressure is 1 atm, the volume is 2.5 L, and the temperature is 273.15 K.

To find the number of moles of gas present, we can rearrange the ideal gas law equation to solve for n:

n = PV/RT

Substituting the values at STP, we get:

n = (1 atm) x (2.5 L) / [(0.08206 L atm/mol K) x (273.15 K)]

n = 0.1018 moles

The difference in weight between the gas-filled vessel and the evacuated vessel is 2.75 g, which is the weight of 0.1018 moles of the unknown gas.

So the molar mass of the gas can be calculated as:

molar mass = mass / moles

molar mass = 2.75 g / 0.1018 mole

molar mass = 27.0 g/mol

Therefore, the molar mass of the unknown gas is 27.0 g/mol.

Learn more about , the molar mass

https://brainly.com/question/22997914

#SPJ4

The molar mass of the unknown gas is 27.0 g/mol.

According to the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. At STP, the pressure is 1 atm, the volume is 2.5 L, and the temperature is 273.15 K.

To find the number of moles of gas present, we can rearrange the ideal gas law equation to solve for n:

n = PV/RT

Substituting the values at STP, we get:

n = (1 atm) x (2.5 L) / [(0.08206 L atm/mol K) x (273.15 K)]

n = 0.1018 moles

The difference in weight between the gas-filled vessel and the evacuated vessel is 2.75 g, which is the weight of 0.1018 moles of the unknown gas.

So the molar mass of the gas can be calculated as:

molar mass = mass / moles

molar mass = 2.75 g / 0.1018 mole

molar mass = 27.0 g/mol

Therefore, the molar mass of the unknown gas is 27.0 g/mol.

Learn more about , the molar mass

brainly.com/question/22997914

The pH after the addition of the 0.020 moles of HCl is added to 275 ml of the buffer solution is 6.40.

A buffer solution is an acidic or basic aqueous solution made up of a combination of a weak acid and its conjugate base, or vice versa (more specifically, a pH buffer or hydrogen ion buffer). When a modest amount of a strong acid or base is applied to it, the pH hardly changes at all.

A multitude of chemical applications employ buffer solutions to maintain pH at a practically constant value. Numerous biological systems employ buffering to control pH in the natural world.

275mL buffer 1L/1,1000 mL 0.75 mol H2CO3/ 1L Solution = 0.206 mol H2CO3

275 mL buffer 1L/ 1,000 mL 0.65 mol HCO3- / 1L Solution= 0.179 mol HCO3-

pH = 6.37 + log(0.179 mol + 0.020 mol / 0.206 mol + 0.020 mol)

pH = 6.37 + 0.0293

pH =  6.40.

Learn more about Buffer solution:

https://brainly.com/question/27371101

#SPJ4

The formation of ions is an essential process in chemistry and is involved in many chemical reactions and compounds.

Atoms are composed of protons, neutrons, and electrons. The number of protons in an atom determines its atomic number and the element it represents. The electrons in an atom occupy different energy levels or shells, and these electrons participate in chemical reactions. The outermost shell of electrons, called the valence shell, is particularly important in chemical reactions because it determines the chemical properties of the atom.

When an atom gains or loses electrons, it becomes charged and is called an ion. The process of gaining or losing electrons is called ionization. When an atom loses one or more electrons, it becomes a positively charged ion called a cation. Cations have a smaller number of electrons than protons and have a net positive charge. For example, when the element sodium (Na) loses one electron, it becomes a sodium ion (Na+).

On the other hand, when an atom gains one or more electrons, it becomes a negatively charged ion called an anion. Anions have a larger number of electrons than protons and have a net negative charge. For example, when the element chlorine (Cl) gains one electron, it becomes a chloride ion (Cl-).

The formation of ions is a fundamental process in many chemical reactions. Ions can combine with each other to form ionic compounds, which are compounds composed of ions held together by electrostatic forces. For example, sodium ions (Na+) and chloride ions (Cl-) can combine to form sodium chloride (NaCl), which is common table salt.

Overall, the formation of ions is an essential process in chemistry and is involved in many chemical reactions and compounds.

Visit to know more about Compound:-

brainly.com/question/26487468

#SPJ11

we need to use the atomic weight of lead to convert the given weight in grams to moles. The atomic weight of lead is 207.2 g/mol.

First, let's convert the given weight in pounds to grams: 1.00 lb = 454 g
Next, let's calculate the number of moles of lead atoms in 454 g of lead: moles of lead atoms = (454 g) / (207.2 g/mol) = 2.19 mol.

Therefore, there are 2.19 moles of lead atoms in 1.00 lb (454g) of lead. To calculate the number of moles of atoms in 1.00 lb (454g) of lead, you need to use the formula: moles = mass (g) / molar mass (g/mol)

The molar mass of lead (Pb) is 207.2 g/mol. Using the given mass of 454g, the calculation is as follows:
moles = 454g / 207.2 g/mol = 2.19 moles
So, there are 2.19 moles of atoms in 1.00 lb (454g) of lead.

To know more about formula click here

brainly.com/question/29886204

#SPJ11

To determine how many moles of atoms are there in 1.00 lb (454g) of lead, you'll need to follow these steps:

Step 1: Convert weight to grams.
1.00 lb of lead is already given as 454g.

Step 2: Find the molar mass of lead.
Lead (Pb) has a molar mass of approximately 207.2 g/mol.

Step 3: Calculate the number of moles.
To find the moles, divide the mass of lead (454g) by its molar mass (207.2 g/mol).

Moles = 454g / 207.2 g/mol

Your answer: There are approximately 2.19 moles of atoms in 1.00 lb (454g) of lead.

To know more about molar mass of lead:

https://brainly.com/question/19477776

#SPJ11