NaF MgO
Boiling Point 1695 3600
Na+ Mg2+ F- Cl- O2-
Ionic Radius 76 72 133 181 140
Based on the data in the table above, which of the following statements provides the best prediction for the boiling point of NaCl?
a. NaCl will have a lower boiling point than NaF because the coulombic attractions are weaker in NaCl than in NaF
b. NaCl will have a boiling point between that of NaF and MgO because the covalent character of the bonds in NaCl is intermediate between that of MgO and NaF
c. NaCl will have a higher boiling point than MgO because the ions are spaced farther apart in NaCl
d. NaCl will have a higher boiling point than MgO because the energy required to transfer electrons from the anion to the cation is larger in NaCl than in MgO

Answers

Answer 1

The right response is a. NaCl will have a lower boiling point than NaF because the coulombic attractions are weaker in NaCl than in NaF

The strength of the intermolecular interactions between a compound's particles determines its boiling point. The intermolecular interactions in an ionic compound like NaCl are electrostatic forces of attraction between the positive cations and the negative anions. The particles in an ionic compound are called ions. The charge of the ions and their separation from one another define the strength of these forces.

The cations in NaCl are Na+, while the anions are Cl-. Na+ has a radius of 76 pm, while Cl- has a radius of 181 pm. The distance between the ions in NaCl is higher than that in NaF, which has smaller ions, since the radius of Cl- is greater than that of Na+. As a result, in comparison to NaF, the electrostatic forces of attraction between the ions in NaCl are weaker. This indicates that the boiling point of NaCl is lower than that of NaF because less energy is needed to separate the ions in NaCl.

To learn more about boiling point:

https://brainly.com/question/29233996

#SPJ4


Related Questions

question mode multiple choice question which one of the following irreversibilities describes the force that opposes the relative motion between two bodies in contact with one another? multiple choice question. friction heat transfer chemical reactions mixing of two fluids

Answers

The force that resists the relative motion of two bodies is referred to as irreversibility. Examples of this include chemical reactions, mixing two fluids, and electrical resistance.

Why do we use the term "chemical"?

Any material with a known composition is a chemical. To put it another way, a chemical always consists of the same "substance." There are some substances in nature, like water. Chlorine and other chemicals are made at factories.

What instances from chemistry?

All of these things are made of chemical, some natural and others synthetic, including air, water, iron, fuel, clothes, stone, equipment, plastics, plants, and food. Chemicals can be made up of several different chemicals or they can be specific chemical molecules like water. Ammonia, oxygen, water, carbon dioxide, and other substances are all present in air.

To know more about chemical visit:

https://brainly.com/question/292401834

#SPJ

which of the following statement is false? which of the following statement is false? water is the most abundant atom. water is essential for life. water is polar. water stabilizes temperature.

Answers

Water is the most abundant atom is a false statement.

Water molecule is composed of two hydrogen atoms and one oxygen atom. Water is necessary for the survival of living organisms. Water is polar because the oxygen atom in water has a higher electronegativity than the hydrogen atoms, resulting in a partial negative charge on the oxygen atom and partial positive charges on the hydrogen atoms.

Water stabilizes temperature because it has a high heat capacity, meaning it can absorb or release a large amount of heat without experiencing a significant change in temperature. This allows it to act as a temperature buffer, helping to maintain a relatively stable temperature in living organisms and in the environment.

Learn more about Water Molecule here: https://brainly.com/question/18725854

#SPJ4

The a of a monoprotic weak acid is 0.00839. What is the percent ionization of a 0.199 M solution of this acid?

Answers

The percent ionization of the acid is obtained as 21%.

What is the percent ionization?

We know that a weak acid is said to be the kind of acid that is not able to ionize completely in solution. The implication of this is that we are still going to have some of the acid that have not be ionized in the system at the end of the reaction.

We know that;

α = √Ka/Co

α = Percent ionization

Ka = acid dissociation constant

Co = Initial concentration

Hence, we have;

α = √0.00839/0.199

= 0.21 or 21%

Learn more about percent dissociation:https://brainly.com/question/16848897

#SPJ1

Given the density of Au is 19.3 g/cm^{ 3} , determine the mass of gold in an ingot with the dimensions of 10. in x 4.00 in x 3.00 in. Give your answer as a number with correct sig figs only.

Answers

The mass of the gold with the density of 19.3 g/cm³ with dimensions of 10.0 in x 4.00 in x 3.00 in is 38,011.48 grams.

How to calculate mass?

The mass of a substance can be calculated from the density by using the following expression;

Density = mass ÷ volume

According to this question, the dimensions of gold is given as 10.0 in x 4.00 in x 3.00 in. The density of gold is 19.3 g/cm³.

Volume of gold = 10 × 4 × 3 = 120in³

120in³ is equivalent to 1966.45cm³

19.3g/cm³ = mass ÷ 1966.45cm³

mass = 19.3 × 1966.45

mass = 38,011.48 grams.

Learn more about mass at: https://brainly.com/question/10397467

#SPJ1

control of metal-support interactions in heterogeneous catalysts to enhance activity and selectivity

Answers

Control of metal-support interactions (MSIs) in heterogeneous catalysts can enhance both activity and selectivity.

 

MSIs refer to the interactions between the metal catalyst and the support material it is placed on. By fine-tuning the MSIs, the activity of the catalyst can be increased by optimizing the distribution and dispersion of the metal particles. In addition, by controlling the MSIs, the selectivity of the catalyst can be improved, allowing for the production of specific products in a reaction. This is done by manipulating the electronic and geometric properties of the metal-support interface, which affect the adsorption and activation of reactant molecules.

In general, controlling MSIs is a powerful way to make heterogeneous catalysts work better.

Learn more about metal interactions here: brainly.com/question/19153185

#SPJ4

in part 1, sort the orbitals in order of energy, with the lowest-energy orbital at the bottom. then in part 2, consider how many of these orbitals are filled with electrons.

Answers

The lowest energy orbital will be closest to the nucleus of an atom. Each and every orbital is filled with electrons in the order: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p, and so on.

The lowest energy sublevel always be the 1s sublevel, which consists of one orbital. The single electron of an hydrogen atom will be occupy the 1s orbital when the atoms are in its ground state. As we proceed with atoms with multiple electrons, those electrons are added to the next lowest sublevel: 2s, 2p, 3s, and so on. Orbitals will be ranked in the increasing order of orbital energy as follows: 1s < 2s = 2p < 3s = 3p = 3d <4s = 4p = 4d= 4f.

To now more about lowest energy here

https://brainly.com/question/28609057

#SPJ4

Ketamine sometimes used as an adjuvant to general anesthesia, is available as a 10.0%(w/v) solution. Calculate the mass of ketamine in 2.50 ml of this solution.

Answers

Answer:

0.25 grams

Explanation:

mass = (concentration x volume) / 100

The concentration of ketamine is 10.0%w/v and the volume is 2.50 ml.

mass = (10 x 2.50) / 100

mass = 0.25 g

So, there is 0.25 grams of ketamine in 2.50 ml of a 10.0% (w/v) solution.

Heating Curve Question. I tried to be very deliberate solving this problem, but none of my answers - +50, -50, +49.6, etc. - were accpeted and I've just been stuck on this question for a few days. Any help is appreciated, thanks : )

Answers

Answer:

It sounds like the writer's experiences of scouting have had a profound impact on his life. He values the connection with nature and the skills he learnt, as well as the importance of preserving the environment for future generations. He also mentions the words and phrases associated with scouting, which he says can act as a reminder of the experience and the joy he felt during his time in the Scouts. It's clear that the writer values the experiences of scouting and has a strong appreciation for the outdoors.

calculate the volume of sulfur hexafluoride gas that is collected. you can assume the pressure in the room is exactly 1atm. round your answer to 3 significant digits.

Answers

Mols or Temprature was not given so I assumed 70f room and temp.

We know that P = 1 atm, n = number of moles, R = 8.314 J/mol*K and T = (70 + 459.67)*5/9 = 527.67K (converting the temperature from Farrenheight to Kelvin)

so, V = (nRT)/P

Therefore, we need the moles of sulfur hexafluoride gas to calculate the volume. Without the moles of the gas, it is impossible to determine the volume of the gas.

Complete the following statement: Oxygen is a reactant of _____(1)_____ while being the product for _____(2)_____. (4 points)

a
(1) photosynthesis, (2) fermentation

b
(1) cellular respiration, (2) photosynthesis

c
(1) fermentation, (2) anaerobic respiration

d
(1) aerobic respiration, (2) photosynthesis

Please will give brainly!!!

Answers

Oxygen is a reactant of cellular respiration while being the product for photosynthesis.

What is photosynthesis?

It is defined as a process by which plants and other photosynthetic organisms convert the light energy in to chemical energy  through the process of cellular respiration.

Some of the energy which is converted  is stored in molecules of carbohydrates like sugar and starches  which are made up of from carbon dioxide and water . Photosynthetic organisms which can perform photosynthesis  are algae and cyanobacteria. Photosynthesis is largely responsible for producing and maintaining the content of oxygen in earth's atmosphere.

Learn more about photosynthesis,here:

https://brainly.com/question/29764662

#SPJ1

Sharla finds a container labeled tungsten. She removes the metal and weighs it and determines the mass is 377.64 grams of tungsten. How many moles of
TuneSten did she one?

Answers

Sharla finds a container labeled tungsten and Sharla found 2.05 moles of tungsten in the container.

What is moles of a substance?

Mole is the amount of substance of a system that contains as many elementary entities as there are atoms in 0.012 kilogram of carbon 12 and its symbol is “mol”. One mole of substance is equal to the value of 6.023 x 10^23 (Avogadro's number). It can be used to measure the products obtained from chemical reaction.

As, number of moles is mass / molar mass

so, molar mass of tungsten is 183.84 g/mol.

the number of moles of tungsten that Sharla found would be:

number of moles = 377.64 g / 183.84 g/mol = 2.05 mol

Therefore, Sharla found 2.05 moles of tungsten in the container.

To know more about moles of substance, refer

https://brainly.com/question/14357742

#SPJ1

how many moles are in 977 grams of HgSO4

Answers

There are 3 moles of HgSO4 in 977 grams of HgSO4.

To calculate this, we need to use the molar mass of HgSO4.

Molar mass of HgSO4 = 271.5 g/mol

hence, 977 g / 271.5 g/mol = 3.6 moles of HgSO4.

What is molar mass?

Molar mass is a physical property of a substance and is measured in grams per mole (g/mol). It is the mass of one mole of a substance and is equal to the sum of the relative atomic masses of all the atoms in a molecule. Molar mass is important in chemistry and is used to calculate the mass of a given number of moles in a substance or solution. It is also used to calculate the mass of a given volume of a substance, such as when calculating the molarity of a solution. Knowing the molar mass of a substance is useful for many calculations, like determining the number of moles in a given mass, or the mass of a given number of moles.

Therefore, There are 3 moles of HgSO4 in 977 grams of HgSO4.

To learn more about molar mass

Here: https://brainly.com/question/837939

#SPJ1

Question 9 (1 point)
Which of the following correctly expresses the relationship between frequency and wavelength. Use the diagram below to help you.



a
Frequency increases as wavelength decreases (gets shorter)
b
Frequency and wavelength are unrelated.
c
Frequency is equal to wavelength.
d
Frequency decreases as wavelength increases (gets longer)

Answers

The statement that correctly expresses the relationship between frequency and wavelength is as follows: Frequency increases as wavelength decreases i.e. gets shorter (option A).

What is wavelength?

Wavelength is the length of a single cycle of a wave, as measured by the distance between one peak or trough of a wave and the next.

The wavelength is often designated in physics as λ, and corresponds to the velocity of the wave divided by its frequency.

Frequency and wavelength are inversely proportional to each other. The wave with the greatest frequency has the shortest wavelength and vice versa.

Therefore, option A is correct.

Learn more about wavelength at: https://brainly.com/question/12924624

#SPJ1

3. For the carbon in the structure shown, determine the followi
H
(a) Hybridization:
(b) Molecular shape_
(c) Number of electron domains:
(d) Bond Angle:

Answers

The carbon that is SP2 hybridized in the compound is carbon 4 (C4).

What is the hybridization?

When we talk about the hybridization of the carbon atom, we mean the fact that the orbitals that are in the carbon atom are mixed in such a way that the orbitals that have the appropriate energy to be able to participate in the chemical bonds are formed.

As such looking at the compound that we have been shown in the image, we can see that not all the carbon atoms would be at the same state of hybridization.

Learn more about hybridization:https://brainly.com/question/14140731

#SPJ1

A ball leaves a girl's hand with an upward velocity of 6 meters per second. What is the maximum height of the ball above the girl's hand?

Answers

The maximum height that is attained by the ball that leaves the hand is 1.8 m.

What is the maximum height?

We know that we can be able to use the equation of the motion of a body that occurs under gravity to be able to obtain the maximum height that has been attained by the ball as it is leaving the hand of the girl.

We would then have that;

v^2 = u^2 - 2gh

v = final velocity

u = initial velocity

g = acceleration due to gravity

h = height of the ball

If v = 0 m/s at the maximum height

u^2 = 2gh

h = u^2/2g

h = (6)^2/2 * 9.8

h = 36/19.6

h = 1.8 m

Learn more about maximum height:https://brainly.com/question/11535666

#SPJ1


define each of the following as atomic element, molecular element, ionic compound, or molecular compound. h2s [ select ] xe [ select ] br2 [ select ] cacl2 [ select ] i2 [ select ] al2s3 [ select ] pb [ select ] no2

Answers

Xe and Pb are atomic elements. I₂ and Br₂ are molecular elements. CaCl₂ and Al₂S₃ are ionic compounds and NO₂ and H₂S are molecular compounds.

Atomic elements are the elements which cannot be broken down further and combine together to form molecules. Among the substances given to us, Xenon (Xe) and Lead (Pb) can be categorised as atomic elements. Molecular elements are formed when the same elements combine with each other. I₂ and Br₂ are molecular elements.

Ionic compounds are consist of ions bound together. CaCl₂ and Al₂S₃ are ionic compounds. Molecular compounds are formed up of two or more elements and NO₂ and H₂S are molecular compounds.

To know more about ionic compounds here

https://brainly.com/question/9167977

#SPJ4

A freshener is the best choice of tonic lotion for mature or __ skin?

Answers

Answer: A freshener is the best choice of tonic lotion for mature or SENSITIVE skin.

Explanation: The ingredients reduce aging.

In the context of a drug misuse, match the types of chemicals (in the left column) with the corresponding definitions of misuse (in the right column)

Answers

As in the context of drug misuse, the following chemical types are linked to their corresponding definitions of misuse:

"Prescription drugs" should be matched with "use of drugs in greater amounts than, or for purposes other than, those prescribed by a physician or dentist." "Nonprescription drugs or chemicals" should be matched with "any use other than the use intended by the manufacturers of those chemicals."

Drug misuse refers to the incorrect or harmful use of a substance, including prescription and over-the-counter drugs, as well as illegal drugs. This can include taking a higher dose than prescribed, using someone else's medication, using a drug for non-medical purposes, or combining drugs in a way that is dangerous. Drug misuse can lead to negative health consequences and may also contribute to the development of a substance use disorder.

Prescription drugs (not in the context of misuse) are medications that are prescribed by a healthcare professional and are intended for use in the treatment of a specific medical condition.

Nonprescription drugs, also known as over-the-counter (OTC) drugs, (not in the context of misuse) are substances that are available for purchase without a prescription. They are used to treat common health issues, such as pain or a headache, but can also be abused. Chemicals refer to any substance, whether natural or man-made, that can be used for a specific purpose, including but not limited to drugs.

Learn more about drug abuse here: brainly.com/question/1189815

#SPJ4

fill in the blank. last word if a government wants to efficiently reduce a widespread negative externality like air pollution, it must know the costs of pollution abatement of the individual polluters. however, this information is difficult to obtain directly. tradeable emissions permits are one way to solve the asymmetric information problem affecting pollution abatement efforts. fill in the blanks to explain how this is possible.

Answers

If a government wants to efficiently reduce a widespread negative externality like air pollution, it must know the costs of pollution abatement of the individual polluters.

a. lower, higher

b. lower, lower

The term "abatement costs" refers to the expenses incurred by a company or organization when it becomes necessary to get rid of any unwelcome annoyances or unfavorable byproducts of the production process. It is the cost associated with removing a harmful externality, such as pollution that has an adverse environmental impact.

As tradable emissions permits are available, organizations with lower abatement costs can sell them to companies with higher abatement costs in order to address the issue of pollution abatement costs.

The firm that sold the permit would have lower abatement costs and the negative externality is also lowered at the lowest cost achievable if the firm still had to cut its pollution output after selling.

Learn more about Harmful here:

https://brainly.com/question/16747083

#SPJ4

If a government wants to efficiently reduce a widespread negative externality like air pollution, it must know the costs of pollution abatement of the individual polluters. However, this information is difficult to obtain directly. Tradeable emissions permits are one way to solve the asymmetric information problem affecting pollution abatement efforts.

a. Because the permits are tradeable, firms with ___ abatement costs will sell some of their permits to firms with ___ abatement costs.

Now consider that even after a firm has sold its permits, it must still reduce its pollution output.

b. Since those who sell their permits would have ___ abatement costs, the negative externality is reduced at ___ possible cost to society.

the reaction of 2,2-dimethyl-1-propanol, also known by the common name neopentyl alcohol with hbr gives 2-bromo-2-methylbutane as the major product. giving the structures of the reactant and the product of the reaction, show mechanistic explanation for the product of the reaction.

Answers

The reaction of 2,2-dimethyl-1-propanol, also known as the neopentyl alcohol with HBr gives 2-bromo-2-methylbutane as the major product. It is a SN₁-mechanism.

Neopentyl alcohol is a primary alcohol, but the bulky group has hindered it. The backside attack is not possible, so instead of the SN₂ mechanism SN₁ followed to get the desired rearranged product. The reaction will forms a rearranged stable carbocation from the primary carbocation to the tertiary carbocation.

Protonation of the Neopentyl alcohol will converts the hydroxy group into a good leaving group. Water will leaves form a primary carbocation rearranged through the methyl shift, which is thus forming a stable tertiary carbocation. Bromide ion will also attacks the carbocation to form a product 2-bromo-2-methylbutane. Mechanism will showing the formation of 2-bromo-2-methylbutane.

To know more about carbocation here  

https://brainly.com/question/14147603

#SPJ4

chromium and cadmium can be removed from wastewater by treatment with sodium hydroxide. show the net ionic reactions of cr3 (aq) with naoh(aq) and cd2 (aq) with naoh(aq).

Answers

The following are the net ionic processes for removing chromium (III) and cadmium from wastewater using sodium hydroxide: Sodium hydroxide with chromium (III): Cr3+(aq) + 3NaOH(aq) -> Na3Cr(OH)3.

Cadmium in the presence of sodium hydroxide: Cd2+(aq) + 2NaOH(aq) -> Na2Cd(OH)2. Metal ions react with hydroxide ions in both processes to generate insoluble metal hydroxide precipitates that can be readily removed from the solution. Precipitation is a treatment method that is excellent for removing heavy metal ions from wastewater.chromium and cadmium can be removed from wastewater by treatment with sodium hydroxide. show the net ionic reactions of cr3 (aq) with naoh(aq) and cd2 (aq) with naoh(aq).The following are the net ionic processes for removing chromium (III) and cadmium from wastewater using sodium hydroxide: Sodium hydroxide with chromium (III): Cr3+(aq) + 3NaOH(aq) -> Na3Cr(OH)3.

learn more about hydroxide  here:

https://brainly.com/question/4251554

#SPJ4

a layer of mineral oil is poured on top of a layer of ethylene glycol and a piece from a board game is placed at rest with its midpoint in line with the boundary between the two layers, as shown. the piece remains at rest because the density of the sphere is greater than the density of mineral oil and less than the density of ethylene glycol. earth, the mineral oil, and the ethylene glycol exert forces on the piece with magnitudes fearth , fmineraloil , and fethyleneglycol , respectively. which of the following, where the dot represents the piece, correctly identifies the direction and relative magnitude of these forces?

Answers

The earth's force would be applied to the object (the earth) in a downward direction, toward the planet's centre. The force that the mineral oil would apply to the object (fmineraloil) would be directed

Mineral oil is a liquid that is produced from petroleum and is transparent, colourless, and odourless. It frequently appears in a wide range of consumer and industrial goods, including lubricants, fuels, cosmetics, and personal care products. Mineral oil functions as a moisturiser and occlusive agent in cosmetics and personal care products, helping to stop water loss from the skin. In several applications for food processing, it is also utilised as a lubricant. Despite its extensive use, certain questions have been raised regarding mineral oil's possible negative effects on health, particularly when it is used in cosmetics and personal care items. According to certain research, regular use of products containing mineral oil may cause skin irritation and blocked pores. But there is conflicting da

Learn more about Mineral oil here:

https://brainly.com/question/12899264

#SPJ4

Which of the following represents the overall chemical equation for the reaction and the rate law for elementary step 2

Answers

H2(g) + 2ICI(g) = 2HCI(g) + I2(g) is the overall reaction  Step 2's rate law is rate = k [HI][ICI]

It is critical to consider not only the chemical properties of the reactants, but also the conditions under which the reaction occurs, the mechanism by which it happens, the rate at which it occurs, and the equilibrium toward which it is progressing in a chemical reaction. The substances that influence the reaction rate are usually one or more of the reactant's side, but products can also be included. Catalysts, which are not included in the balanced chemical equation, can also influence the reaction rate.

For a chemical reaction, the rate law (also known as the rate equation) is an expression that describes the relationship between the rate of the response and the concentrations of the reactants involved.

Learn more about rate law here:

https://brainly.com/question/14779101

#SPJ4

The complete question is:

Step 1:

H2(g) + ICl(g) ----------- HI(g) + HCI(g) (slow)

Step 2:

HI(g) + ICI(g) ------------ HCI(g) + I2 (g) (fast)

Which of the following represents the overall chemical equation for the reaction and the rate law for elementary step 2?

A) The overall reaction is H2(g) + 2 ICI(g) --------- HCI(g) + I2(g); the rate law for step 2 is rate = k[H2] [HI] [ICI]

B) The overall reaction is H2(g) + 2 ICI(g) -------- 2 HCI(g) + I2(g); the rate law for step 2 is rate = K[H2][ICI]2.

C) The overall reaction is Ha(g) + ICI(g) --------- HCI(g) + 1(g); the rate law for step 2 is rate = K-[H2][ICI].

D) The overall reaction is H2(g) + 2 ICI(g) ------- 2 HCI(g) + I2 (g); the rate law for step 2 is rate = [K][HI] [ICI]

The release of which substance is represented by the arrows?

Answers

The arrows depict the substance's carbon dioxide emission.

By substance, what do you mean?

A substance is a material that has specific qualities and a specific composition. A substance is any unadulterated element or pure composite. By using any physical technique, a substance cannot be separated. A pure substance has fixed properties/composition. Iron and sugar are two examples of substances.

An illustration of a material

Matter with a definite composition and set of characteristics is referred to as a substance. A substance is every pure element. It is a material when it is pure. Substance examples: Because iron is an element, it is also a substance. Methane is both a material and a compound.

To know more about Material visit:

https://brainly.com/question/28646672

#SPJ1

One of the main properties of covalent bonds is that they form
O a. weak
O b. strong
O c. metallic
d. ionic
bonds.

Answers

Electrons from both participating atoms are distributed equally to create a covalent bond.

In this  case option B is correct.

Covalent bonds: how are they created?

The shared pair or bonding pair is the name for the electron pair that makes up this kind of bonding. Extremely high ionization energy elements cannot accept electrons, and equally, extreme low electron affinity elements cannot transmit electrons.The atoms of these elements frequently exchange electrons with other atoms of the same element or with atoms of other elements in order for both atoms to achieve stability.Bonds between objects of different or similar types that share electron pairs are known as covalent bonds. When two atoms trade one or more pairs, a covalent bond is created.

To learn more about covalent bond refer to  :

brainly.com/question/3447218

#SPJ1

The bones of a saber-toothed tiger are found to have an activity per gram of carbon that is 15.0 % of what would be found in a similar live animal. How old are these bones? Give answer in years. Do not enter unit.

Answers

The bones are 16925 years old.

The process of carbon dating involves counting the amount of the radioactive isotope carbon-14 that is present in a sample. As carbon-14 breaks down into nitrogen-14 over time, less of it is present. Scientists can determine how recently an organism died by calculating the ratio of carbon-14 to carbon-12 in a sample. Now to know the age of the bones we must directly use the radioactive decay law: d N d t ∝ N

Where the rightmost part of the equation comes from the statement that the activity found is just 15.0% of the activity that would be found in a similar live animal. This means that the number of carbon-14 atoms is just  15.0% of what it was at the moment the saber-toothed tiger died.

To know more about saber-toothed tiger:

https://brainly.com/question/24330911

#SPJ4

treatment of the following stereoisomer of 1-bromo-1,2-diphenylpropane with sodium ethoxide in ethanol gives a single stereoisomer of 1,2-diphenylpropene. draw the e2 elimination product of the reaction. take into account that the starting stereochemistry affects the resulting double bond stereochemistry.

Answers

Take into account that the starting stereochemistry affects the resulting double bond stereochemistry.

Define  stereoisomer ?

Stereoisomers. Generally defined, stereoisomers are isomers that have the same composition (that is, the same parts) but that differ in the orientation of those parts in space. There are two kinds of stereoisomers: enantiomers and diastereomers.

Stereoisomers have the same molecular formula and chemical bonds but they have different spatial arrangements. Stereoisomers can be subdivided into two parts that are configurational and conformational isomers.

Stereoisomers occur as a result of the different relative orientations of distinct groups of molecules that are connected to a central core. R-Thalidomide and S-Thalidomide are an example of stereoisomers.

To learn more about stereoisomer refers to:

https://brainly.com/question/17366745

#SPJ4

Explain how to use molecular shapes to predict molecular polarity

Answers

An molecule is polar if the lengths of the arrows differ and they not balance each other.

What is the straightforward meaning of a molecule?

Pay close attention to the sound. the smallest part of a molecular that includes both its physical and chemical properties pronounced (MAH-leh-kyool). Molecules are made up of one or more electrons.

Water: A Molecular or Not?

Molecules are created when atoms come together. Two hydro (H) ions and one oxygenation (O) atom make up the three atoms that make up a water molecule. Because of this, water is occasionally abbreviated as H2O. There are trillions of water molecules in a single drop of liquid.

To know more about molecule visit:

https://brainly.com/question/16900319

#SPJ4

NEED HELP ASAPPPPPPP​

Answers

A color's degree of purity is measured by intensity, commonly referred to as saturation or chroma. While a low-intensity color is more muted or neutral, a very intense hue is dazzling.

What adjectives best characterize a color's intensity?A color's brightness or dullness is determined by its intensity, often known as chroma or saturation. The intensity of a color is maximum when it is displayed on a color wheel (bright). It turns boring when used with white, gray, or black. When blended with their complement, colors also lose intensity (the opposite color on the wheel).A color's degree of purity is measured by intensity, commonly referred to as saturation or chroma. While a low-intensity color is more muted or neutral, a very intense hue is dazzling.A color's degree of purity is measured by intensity, commonly referred to as saturation or chroma.

The complete question is,

What is a hue that is quite intense?

To learn more about color's intensity refer to:

https://brainly.com/question/1366347

#SPJ1

Consider the composition. information from the SDS. What is a possible name of this compound?

A. Glycine
B. Glycol
C. Glycogen
D. Glycerol​

Answers

Answer: B

Explanation:

Other Questions
after a three-year ban, marvel films are set to return to movie theater screens in which country? Which statement is an example of the conflict between Gregor's mind andbody?A. He is more powerful but doesn't have any human emotions.B. He has a strong body but is starting to lose his memory.C. He has grown smarter but can't move as quickly as he used to.D. He is physically weak, but his mind is sharp.SUBMIT albinism, lack of pigmentation in humans, results from an autosomal recessive gene (a). two parents with normal pigmentation have a child with albinism. what is the probability that their next child will have albinism? Given the density values for the metals in the table below, will the same volume of your unknown metal be lighter or heavier than copper?MetalDensity (g/cm3)zinc7.13tin7.28copper8.96silver10.49lead11.36 salma is a top salesperson who is highly regarded in her department for the ability to give verbal presentations to high-powered clients. this describes salmas? which of the following properties are intensive, and which are extensive? check the box that applies. malleability intensive extensive length intensive extensive hardness intensive extensive volume intensive extensive olga is an attorney at a large law firm. she recently learned that two of her peers are earning more money than she is despite the fact that olga has more legal experience, a degree from the same law school, and handles a heavier case load than she does. which theory would most clearly predict that olga's motivation will be quite low in this case? If f(g(x))=3, then what must be the value of x?Use the table to find value for x Could not connect to Steam Please confirm network maintenance? Increase 64 by 5%. What field manual covers leadership? part b which transformation could produce these similar triangles?a: begin with DBE and dilate the triangle about point Bb: begin with DBE and rotate the triangleabout point b c: begin with DBE and reflect the triangle about DEd begin with DBE and translate DE to AC dr. barlow administers the beck depression inventory in the same experiment that he administers his new depression questionnaire. he is checking for: chromosomal abnormalities are most often associated with: parental age. maternal age. environmental agents. use of illegal drugs. Monica has a triangular piece of fabric. The height of the triangle is 11 inches and the triangle's base is 6 inches. Monica says that the area of the fabric is 66 in2. What error did Monica make? Explain your answer by entering the correct area of the fabric. Monica forgot to multiply by Help!!!Write a function rule for "The output is one-fourth of the input." asking participants to read a description of a situation and predict how they would respond in that situation is called The multi-year lease cost of office computers is a _____ for an accounting firm asset a has an expected return of 16% and a standard deviation of 24%. the risk-free rate is 10%. what is the reward-to-variability ratio? question 4 options: 0.25 0.35 0.76 0.84 lan's car can go 117 miles on 3 gallons of gas. During a drive last weekend, ian used 4 gallons of gas. How far did he drive? Use pencil and paper. Explain how the problem changes if you were given the distance iandrove last weekend instead of how much gas used.