Name the following alkane molecule (picture)
A.) 2-methyl-3-broom-5-ethyloctane
B.) 3-bromo-5-ethyl-2-methyloctane
C.) 3-bromo-5-ethyl-2,7-dimethylheptane

Name The Following Alkane Molecule (picture)A.) 2-methyl-3-broom-5-ethyloctaneB.) 3-bromo-5-ethyl-2-methyloctane

Answers

Answer 1

Answer: B.     3-bromo-5-ethyl-2-methyloctane

Explanation:

Answer 2

The correct name of the compound as we can see is 3-bromo-5-ethyl-2-methyloctane.

What is IUPAC nomenclature?

The IUPAC nomeclature shows the standard,,  approved pattern for naming organic compounds. As a matter of fact it is intended to enable pratitioners to write the name of a compound from structure.

The correct name of the compound as we can see is 3-bromo-5-ethyl-2-methyloctane.

Learn more about IUPAC nomeclature: https://brainly.com/question/14356798


Related Questions

4. Nowadays, clinical thermometer is replaced by digital thermometer,why?

Answers

Answer:

Digital thermometer are used these days instead of clinical thermometers because: Digital thermometers are designed to be more accurate. Most digital thermometers have digital screening which extract temperature of wherever you are measuring.

Outline the steps for a mass-mass stoichiometry problem.

Answers

The answer is Make sure you are working with a properly balanced chemical equation.
Convert grams of the substance given in the problem to moles.
Construct two ratios - one from the problem and one from the chemical equation and set them equal. ...
Convert moles of the substance just solved for into grams. Step 1: Convert known reactant mass to moles. ...
Step 2: Use the mole ratio to find moles of other reactant. ...
Step 3: Convert moles of other reactant to mass. Balance the equation.
Convert units of a given substance to moles.
Using the mole ratio, calculate the moles of substance yielded by the reaction.
Convert moles of wanted substance to desired units.

Need help on this question asap pleasee
No links

Answers

Answer:

Endothermic

Explanation:

An endothermic reaction is one in which energy is absorbed while an exothermic reaction is one in which energy is given out(evolved).

If we look at the reaction as written; 3C(graphite) + 3H2(g) + 88kcal -------> C3H8(g), we will notice that;

i) 88kcal of energy had to be absorbed for the reaction to occur

ii) The enthalpy change for the reaction is positive.

Since energy must be taken in to drive the forward reaction, then the reaction is endothermic as written.

Need help to find the molarity. Please help!

Answers

Answer:

0.092M

Explanation:

Molarity of glucose solution = number of moles ÷ volume

According to this question, 12.5g of glucose (C6H12O6) is dissolved in enough water to make 750mL of solution.

Molar mass of glucose (C6H12O6) = 12(6) + 1(12) + 16(6)

= 72 + 12 + 96

= 180g/mol

mole = mass/molar mass

mole = 12.5/180

mole = 0.069mol

Volume of solution = 750mL = 750/1000 = 0.750L

Hence, molarity = n/V

Molarity = 0.069 ÷ 0.750

Molarity = 0.092M

If 1.00 L of gas at 1.00 atm of pressure is compressed to a volume of 0.473 L, what is the new pressure of the gas?

Which gas law formula should you use to solve this problem?

-Avogadro’s Law
-Boyle’s Law
-Charles’ Law

Answers

Answer:

2.114 atm

Explanation:

Since it is just pressure and volume, use Boyle's Law

P1V1 = P2V2

Then plug in numbers

(1 atm)(1 L) = P2(.473 L)

P2 = 2.114 atm

Create 3 multiple choice questions on
photosynthesis and the tropisms.

Number your questions using 1,2,3
and

your answer choices using a,b,c.
Example:
1)What three things are required in order for
photosynthesis to take place
A)Sugar, glucose plants
B)Radiant energy, water, oxygen
C)Radiant energy, water, carbon dioxide

Help ASAP!

Answers

C is the answer..........

If I contain 2.5 moles of gas in a container with a volume of 45 liters and at a temperature of 261 K, what is the pressure inside the container in atmospheres?

Answers

Answer:

The correct answer is "[tex]1.21\times 10^5 \ Pa[/tex]".

Explanation:

The given values are:

Number of moles,

n = 2.5 moles

Volume,

V = 45 liters

Temperature,

T = 261 K

As we know,

⇒  [tex]PV=nRT[/tex]

or,

⇒  [tex]P=\frac{nRT}{V}[/tex]

On substituting the values, we get

⇒      [tex]=\frac{2.5\times 0.0821\times 261}{45}[/tex]

⇒      [tex]=\frac{53.57}{45}[/tex]

⇒      [tex]=1.19 \ atm[/tex]

On converting it in Pa, we get

⇒      [tex]=1.19\times 1.01325\times 10^5[/tex]

⇒      [tex]=1.21\times 10^5 \ Pa[/tex]

FREE BRAINLIEST!!!!! You have two objects. One is hot the other is cold (lack of heat). In what direction does the heat want to travel?

Answers

Cold direction ???????

Answer:

the heat wants to travel up. Heat rises

Explanation:

what is the mass of a sample of glass (specific heat = 0.50 J/g°C), if it requires 490 J of heat to raise the temperature from -18.0°C to 0.0°C?

Answers

Answer:

54.4g

Explanation:

Let's first take account of what we have and what we're looking for.

Q = heat energy (Joules, J)= 490 J

m = mass of a substance= ??

c = specific heat (units J/kg∙K)= 0.50 J/g°C

∆T = change in temperature (Kelvins, K)= Final temperature - initial temperature -> (0C - (-18C))

We can use Q = mc∆T to determine the mass, we'll rearrange the formula to solve for mass, so it'll be: m=Q/c∆T. Let's plug it all in.

m= 490J / (0.50 J/g°C x ((0C - (-18C)))

m= 490J / (0.50 J/g°C x (0 + 18))

m=  490J / (0.50 J/g°C x 18)

m= 490J / 9 J/g

m= 54.4g of glass

Please help! Using table of average bond energies below the (trianglesymbol)H for the reaction is ___kJ

Answers

Answer:

-217 kJ

Explanation:

ΔH =  reactant energy - product energy

ΔH = [(C-H) × 2 + (C≡C)] + [2 × H-I] - [(I-C) × 2 + (C-H) × 4 + (C-C)]

ΔH = [ (413 × 2 ) + 839 + 2(299)]  - [(240 × 2) + (413 × 4) + 348]

ΔH = [826 +839 + 598] -  [ 480 +1652 + 348]

∴ ΔH = -217

What problem would a person have if the nucleic acid in one of his or her
cells was damaged?
A. That cell could not perform photosynthesis.
B. That cell could not join monosaccharides,
O C. That cell could not contain carbohydrates.
D. That cell could not produce certain proteins.
SUBMIT

Answers

If a person will have damaged nucleic acid, they can not form certain proteins. The correct option is D.

What is relation between protein and nucleic acids?

Protein is a polypeptide-based molecule. Polypeptides are a sort of biological particle made up of amino acids that form chains.

Nucleic acid is a kind of macromolecule composed of a lengthy polynucleotide chain that encompasses deoxyribonucleic acid and ribonucleic acid.

Proteins are built under an elaborate process orchestrated by the nucleic acids deoxyribonucleic acid (DNA) and ribonucleic acid (RNA) (RNA).

Protein biosynthesis is the process of constructing protein chains from individual amino acids in a specific sequence.

Deoxyribonucleic acid stores the information that cells necessitate to produce proteins.

A related type of nucleic acid widely recognized as ribonucleic acid (RNA) exists in various molecular forms and serves a variety of cellular functions, including protein synthesis.

Thus, the correct option is D.

For more details regarding nucleic acids, visit:

https://brainly.com/question/11309892

#SPJ2

Explain the laboratory preparation of hydrogen

Answers

Answer:

laboratory preparation off Hydrogen: Hydrogen is prepared in the laboratory by the action of the dilute hydrochloric acid or dilute sulphuric acid on granulated zinc. Use of Granulated Zinc Granulated zinc contains an impurity like copper which acts as a positive catalyyst.

Explanation:

Hope this helps!

AH for the reaction

IF5 (g) → IF3 (g) + F2 (g)

kJ, give the data below.

IF (8) + F2 (g) → IF3 (8)

IF (g) + 2F2(8) ► F5 (8)

AH=-390 kJ

AH=-745 kJ

A) -1135

B) +35

C) +1135

D) -35

E) +355

Answers

Answer:

E) +355 kJ

Explanation:

Based on Hess's law, it is possible to obtain ΔH of a reaction from the sum of similar reactions:

(1) IF(g) + F2(g) → IF3(g) ΔH = -390kJ

(2) IF(g) + 2F2(g) → IF5(g) ΔH = -745kJ

The sum of (1) - (2) is:

IF(g) + F2(g) → IF3(g)

IF5(g) → IF(g) + 2F2(g)

_________________

IF5(g) → IF3(g) + F2(g)

ΔH = -390kJ - (-745kJ)

ΔH = +355kJ

Right answer is:

E) +355 kJ

How many grams of HCL are needed to make 500.0 mL of a 0.100 M solution?

Answers

Answer:

1.44 g

Explanation:

The problem gives you the molarity and volume of the target solution, so right from the start you know that you can use that information to determine the number of moles of hydrochloric acid that it must contain.

So, molarity measures a solution's concentration in terms of how many moles of solute, which in your case is hydrochloric acid, you get per liter of solution.

A

0.158 M

hydrochloric acid solution contains

0.158

moles of hydrochloric acid for very liter of solution. Since you're dealing with

250 mL

, the equivalent of

1

4

th

of a liter, your solution will contain

250

mL

1

L

10

3

mL

0.158 moles HCl

1

L

=

0.0395 moles HCl

Now that you know how many moles of hydrochloric acid are needed to prepare your solution, use the compound's molar mass to convert this to grams

0.0395

moles HCl

36.46 g

1

mole HCl

=

¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯

a

a

1.44 g

a

a

−−−−−−−−−−

Explanation:

Please  brainliest.

Which of these properties contribute to homeostasis? Click on the correct
responses.
Select 3 correct answer(s)

Blood pH

Reflex reactions

Flight or flight

Body temperature

Blood glucose

Answers

body temperature is the main one. blood ph is very important. and reflex reactions. if this was right please give me brainliest

Answer:

Its Body Temperature, Blood glucose, and Blood pH

Explanation:

I checked in Body systems and Homeostasis in Florida.org :>

A 10 kg package is delivered to your house.

Use one complete sentence to describe an example of how work is done on the package as it gets brought inside.

Make sure to use proper spelling, grammar, and other language mechanics.

In your explanation, make sure to use the terms related to the formula for work (W = Fd).

Answers

Answer:

Explanation:

Work is a net force applied through a distance in order to displace an object, commonly abbreviated as W. A net force is the sum of all forces acting on an object. Work is mass times acceleration and distance so to find out the work you simply calculate the acceleration of the box being brought in. Next find the distance it was carried to get in the house. Then find out the mass of the box and finally multiply those sums together to get the amount of work put in to bring the package inside.

how many moles are there in 2.75L of a 2.0M solution

Answers

5.5 moles
2.0=x/2.75
2.0*2.75= x/2.75 (2.75)
5.5=x

Calculate the temperature of a gas when it is expanded to 5.25L. The gas originally occupies 3.90L of space at 252K.

Answers

Answer:

[tex]T_2=339K[/tex]

Explanation:

Hello there!

In this case, according to the Charles' gas law as way to understand the volume-temperature as a directly proportional relationship for this problem, we can write:

[tex]\frac{T_2}{V_2}=\frac{T_1}{V_1}[/tex]

Thus, given the initial temperature and volume and the final volume, we are able to calculate the final temperature as follows:

[tex]T_2=\frac{T_1V_2}{V_1} \\\\T_2=\frac{252K*5.25L}{3.90L}\\\\T_2=339K[/tex]

Best regards!

Dinitrogen oxide (N2O) gas was generated from the thermal decomposition of ammonium nitrate and collected over water. The wet gas occupied 123 mL at 21◦C when the atmospheric pressure was 760 Torr. What volume would the same amount of dry dinitrogen oxide have occupied if collected at 760 Torr and 21 ◦C? The vapor pressure of water is 18.65 Torr at 21◦C. Answer in units of mL.

Answers

Answer:

119.98 mL

Explanation:

Initial volume V1 = 123 ml

Initial temperature = T1 = 21◦C + 273 = 294 K

Initial pressure P1 = 760 Torr - 18.65 Torr = 741.35 Torr

Final volume V2= ???

Final temperature = T2= 21◦C + 273 = 294 K

Final pressure P2 = 760 Torr

From;

P1V1/T1= P2V2/T2

P1V1T2 = P2V2T1

V2 = P1V1T2/P2T1

V2= 741.35 * 123 * 294/760 * 294

V2 = 119.98 mL

Which three types of reactions yield a product that is a chemically bonded combination of reactants?
A. replacement, polymerization, decomposition
B. polymerization, decomposition, oxidation
C. decomposition, synthesis, replacement
D. oxidation, synthesis, polymerization

Answers

Answer:

D

Explanation:

i just got it right on edge

Answer:

It is D.

Explanation:

I also got it correct on edge :)

John (travel) to Russia next week correct the tense​

Answers

Answer:

hi

Explanation:

John will travel to Russia next week

hope it helps

have a nice day

Answer:

Your answer will be..

John will travel to Russia next week.

Explanation:

He will travel NEXT week so we need to say that he will travel next week.

This may help:

Past tense:  We use -ed because that shows the we already did or finished it. EX: We traveled to Russia over the Spring break

Current Tense:  You will use -ing to show that you are traveling in the current time. EX:We are traveling to Russia.

Future tense:  You might use -ing or keep it the root word. EX: We will be traveling to Russia next week.

We will travel next week.

Hope it helped! Please mark me brainliest! I love helping and I spend a lot of time explaing the answers. Thanks!

~King Sulay~

31. Use the equation given below to answer the following question: If 755 kJ of heat was absorbed, what mass of carbon dioxide reacted?
2CO2 + 43.9 kJ → 2CO +O2

Answers

Answer:

1514g of CO₂ reacted

Explanation:

Based on the reaction:

2CO₂ + 43.9kJ → 2CO + O₂

2 moles of carbon dioxide require 43.9kJ of energy to produce 2 moles of carbon monoxide and 1 mole of oxygen

To solve this question, we must convert the 755kJ of energy to moles of carbon dioxide that reacts and to find the mass as follows:

755kJ * (2 moles CO₂ / 43.9kJ)  =34.4 moles of CO₂ are produced

Mass CO₂: Molar mass: 44.01g/mol

34.4 moles CO₂ * (44.01g / mol) =

1514g of CO₂ reacted

how many grams are in 2.34 moles of Li?

Answers

Answer:

The SI base unit for amount of substance is the mole. 1 mole is equal to 1 moles Lithium, or 6.941 grams.

Thus, the answer would be 16.24194.

Explanation:

25 g of 116oC steam are bubbled into 0.2384 kg of water at 8oC. Find the final temperature of the system.

Answers

Answer: The final temperature of the system will be [tex]13.14^0C[/tex]

Explanation:

[tex]heat_{absorbed}=heat_{released}[/tex]

As we know that,  

[tex]Q=m\times c\times \Delta T=m\times c\times (T_{final}-T_{initial})[/tex]

[tex]m_1\times c_1\times (T_{final}-T_1)=-[m_2\times c_2\times (T_{final}-T_2)][/tex]         .................(1)

where,

q = heat absorbed or released

[tex]m_1[/tex] = mass of steam = 25 g

[tex]m_2[/tex] = mass of water = 0.2384 kg = 238.4 g   (1kg=1000g)

[tex]T_{final}[/tex] = final temperature = ?

[tex]T_1[/tex] = temperature of steam = [tex]116^oC[/tex]

[tex]T_2[/tex] = temperature of water = [tex]8^oC[/tex]

[tex]c_1[/tex] = specific heat of steam = [tex]1.996J/g^0C[/tex]

[tex]c_2[/tex] = specific heat of water= [tex]4.184J/g^0C[/tex]

Now put all the given values in equation (1), we get

[tex]25g\times 1.996J/g^0C\times (T_{final}-116)=-[238.4g\times 4.184J/g^0C\times (T_{final}-8)][/tex]

[tex]T_{final}=13.14^0C[/tex]

Therefore, the final temperature of the system will be [tex]13.14^0C[/tex]

what does binding energy measure

Answers

Answer:

"Electron binding energy, more commonly known as ionization energy, is a measure of the energy required to free an electron from its atomic orbital or from a solid. ... The atomic binding energy of the atom is the energy required to disassemble an atom into free electrons and a nucleus."

Explanation:

Hope this helps! <33

God bless your heart <3333

have a wonderful day!

Binding energy is a required amount of energy that disperses the other particles of the reaction system. It measures the energy needed to free an electron or a subatomic particle.

What is binding energy?

Binding energy is the ionization energy that depicts how much energy will be needed if an electron has to be removed from an atom for a reaction to occur.

It can be said that the energy required to free an electron from the orbit of the atom is measured in electron volt (eV). It is a little different from ionization energy as binding energy can remove any subatomic particle and not just an electron.

Therefore, the binding energy measures the freed subatomic particle.

Learn more about binding energy here:

https://brainly.com/question/16705705

#SPJ2

What is the percentage composition of C6H12O6? Must show work.

Answers

Answer:

I think the percent composition of carbon in C6H12O6 is: 25% C 40% C 7% C

Explanation:

what ingredients are needed to turn the cake mix into cake batter​

Answers

Answer:

Ingredients

2 ⅓ cups all-purpose flour.

1 tablespoon baking powder.

¾ teaspoon salt.

1 ½ cups white sugar.

½ cup shortening.

2 eggs.

1 cup milk.

1 teaspoon vanilla extract.

Explanation:

Describe how crude oil is formed.

Answers

Explanation:

crude oil takes thousands of years before forming.

it takes place when animals and plants die...later they decompose especially the ones in water ..the ones on land burn as fossil fuels and go back to the atmosphere through combustion..the decomposed materials turn into crude oil in the ocean where it's extracted and separated through fractional distillation into several oils such diesel, petroleum, coalter e.t.c

it’s made of the remains of dead organisms

When reacting Na with Cl2 , we calculated that the theoretical yield should be 12.5 grams. Our actual yield was 13.0 grams. What is the percent yield?

Answers

Answer:

[tex]\boxed {\boxed {\sf 104 \%}}[/tex]

Explanation:

Percent ratio is the ratio of the actual yield to the theoretical yield. The formula is below.

[tex]Percent \ Yield} = \frac{{Actual \ Yield}}{{Theoretical \ Yield}} \times 100 \%[/tex]

The reaction of sodium and chlorine should theoretically yield 12.5 grams, but the actual yield was 13.0 grams.

actual yield= 13.0 gtheoretical yield = 12.5 g

Substitute these values into the formula.

[tex]Percent \ Yield} = \frac{{13.0 \ g }}{{12.5 \ g}} \times 100 \%[/tex]

Divide.

[tex]Percent \ Yield} = 1.04 \times 100 \%[/tex]

Multiply.

[tex]Percent \ Yield= 104 \%[/tex]

For this reaction, the percent yield is 104%

1. What is the function of the circulatory system? * 10 points A. Provide blood with oxygen from the air, & to get rid of carbon dioxide B. Carry oxygen, nutrients, waste, & to fight pathogens C. Secrete hormones to regulate the body and maintain homeostasis D. Produce red blood cells, white blood cells, & platelets

Answers

Answer:

B. Carry oxygen, nutrients, waste, & to fight pathogens

Explanation:

The circulatory system refers to all organs and tissues involved in carrying blood and lymph around the body.

The circulatory system carries oxygenated blood from the heart to cells and  deoxygenated blood back to the heart.

Nutrients are carried in the blood to cells in different parts of the body and waste products are also carried from cells in the blood.

White blood cells is a component of blood in the circulatory system that fights off diseases.

Other Questions
The function g(x) = 3 |x| is a transformation of the absolute value parentfunction. Which graph shows g(x)? The following data points represent the number of red candy pieces in each of Nate's bags of candy. 4, 7, 11, 11,2,5,8 Using the data, create a histogram no link need right answer The logo on a shirt is in the shape of a parallelogram. What is the area of the parallelogram? Round to the nearest tenth. ?? is when whales throw their bodies nearcomely out of the water 1 . lobtailing 2. breaching 3 spyhoppin4 water jumping HELP ASAP WILL GIVE brainlist simplify fully: 12/5b 3/10ab HELP I NEED HELP ASAP HELP I NEED HELP ASAP HELP I NEED HELP ASAP HELP I NEED HELP ASAP HELP I NEED HELP ASAP Solve the equation for all real solutions. 15n^2-22n+8=0 what didn't the US constitution provide to people? Taylor cuts 1/3 sheet of constitution paper for arts and crafts project. Enter 1/3 as an equivalent fraction with the demontinators shown. About 130000 high school students took the AP exam in 2010 .the free response section of the exam consisted of five open ended problems and an investigative task each free these are reinforced concrete slabs or thick wooden planks that span the side walls i cant figure this out- Can somebody explain Scatter Plots and Equations of Lines for me. I'm not quite understanding it HELP ME PLEASEEE These early Chinese civilizations existed in southern and northeastern China?A: Sanxingdui and HongshanB: Tang and SongC: Yangzi and XiaD: Ashanti and BantuUnder the Han Dynasty, this was the most popular style of poetry?A: Fu styleB: Spoken word styleC: Shi styleD: Stanza styleWhich emperor was the only peasant to become an emperor?A: Emperor WudiB: Shi HuangdiC: Yu the GreatD: Liu Bang A. Identify FOUR countries that include parts of Spmi. B. If Spmi existed as a separate state, identify the type of morphology that would best describe it. C. Compare the type of boundary that defines Spmi with the type that defines Estonia or Latvia. D. Explain whether Spmi is a nation-state. E. Explain how language both unites and divides the people of Spmi. F. Identify ONE other group of people whose territory stretches across multiple countries. G. Describe ONE challenge faced by a group of people whose territory crosses the boundaries between countries.SOMEONE PLZ HELP ME. which word in this sentence is an intensive pronoun? what are ocean gyres Why is ocean acidification dangerous?2-3 complete sentences