Name the hydro carbon.... I really need your help guyz

Answer:

The enthalpy of reaction is -185 kJ

Explanation:

To get the reaction:

 H₂(g) + Cl₂(g) → 2 HCl(g)

you must follow the following steps:

1)  Reactive molecules must break their bonds to obtain their atoms.

H₂(g) → 2 H(g)

Cl₂(g) → 2 Cl(g)

Bond energy (or enthalpy) is the energy required to break one mole of bonds of a gaseous substance. In the case of diatomic molecules with a single bond, it corresponds to the energy necessary to dissociate 1 mole of said substance in the atoms that form it.

Whenever you want to break links you must supply energy, so the link enthalpy will have positive values; while when a mole of bonds is formed energy is released and the bond enthalpy of this process will be negative.

In this case you will then have:

H₂(g) → 2 H(g)           ΔH=436 kJ/mol

Cl₂(g) → 2 Cl(g)         ΔH=243 kJ/mol

So the total energy needed to break all the bonds is:

ΔH=1 mol*436 kJ/mol +1 mol* 243 kJ/mol= 679 kJ

2) The atoms that were obtained in the break of the bonds must be combined to obtain the product.

2 H (g) + 2 Cl (g) → 2 HCl (g)

Being the single bond energy for one mole of 431 kJ H-Cl bonds and considering that two moles of H-Cl bonds are formed, the ΔH is:

ΔH = -2 moles* (432 kJ/mol) = -864 kJ

As mentioned, when a mole of bonds is formed energy is released, the bond enthalpy of this process will be negative.  So the formation of HCl is negative.

Hess's law states that the energy change in an overall chemical reaction is equal to the sum of the energy changes in the individual reactions comprising it. So:

ΔHtotal= -864 kJ + 679 kJ

ΔHtotal= -185 kJ

The enthalpy of reaction is -185 kJ

Answer:

Electrochemical cells typically consist of two half-cells. The half-cells separate the oxidation half-reaction from the reduction half-reaction and make it possible for current to flow through an external wire.

Explanation:

Answer:

E. None of the above

Explanation:

Answer:

10.2 L of CO₂

Explanation:

Our reaction is:

2C + O₂  →  2CO₂

We convert the mass of C, to moles:

5.50 g / 12g/mol = 0.458 moles

Ratio is 2:2, so if 2 moles of C can produce 2 moles of CO₂ then 0.458 moles of C would produce 0.458 moles of gas.

By the Ideal Gases Law, we know that 1 mol of gas is contained in 22.4L, so:

0.458 mol . 22.4L / 1mol = 10.2 L

Answer:

5730 mmHg.

Explanation:

The following data were obtained from the question:

Initial temperature (T1) = 42 °C.

Initial pressure (P1) = 5000 mmHg.

Final temperature (T2) = 88 °C.

Final pressure (P2) =.?

Next we shall convert celsius temperature,T(°C) to Kelvin temperature, T(K).

This can be obtained as follow:

T(K) = T(°C) + 273

Initial temperature (T1) = 42 °C.

Initial temperature (T1) = 42 °C + 273 = 315 K

Final temperature (T2) = 88 °C.

Final temperature (T2) = 88 °C + 273 = 361 K

Finally, we shall determine the new pressure.

Since the volume of the container is constant, the new pressure can be obtained as follow:

Initial temperature (T1) = 315 K.

Initial pressure (P1) = 5000 mmHg.

Final temperature (T2) = 361 K.

Final pressure (P2) =.?

P1/T1 = P2/T2

5000/315 = P2/361

Cross multiply

315 x P2 = 5000 x 361

Divide both side by 315

P2 = (5000 x 361) / 315

P2 = 5730.1 ≈ 5730 mmHg

Therefore, the new pressure is 5730 mmHg.

THE conjugate acid, within the acid–base theory, is a chemical compound formed by the reception of a proton by a base—in other words, it is a base with a hydrogen ion added to it, as in the reverse reaction it loses a hydrogen ION.

Answer:

Initial volume of the container (V1) = 1.27 L (Approx)

Explanation:

Given:

Number of mol (n1) = 5.67 x 10⁻²

Number of mol (n2) = (5.67 +2.95) x 10⁻² = 8.62 x 10⁻²

New volume (V2) = 1.93 L

Find:

Initial volume of the container (V1)

Computation:

Using Avogadro's law

V1 / n1 = V2 / n2

V1 / 5.67 x 10⁻² = 1.93 / 8.62 x 10⁻²

V1 = 10.9431 / 8.62

Initial volume of the container (V1) = 1.2695

Initial volume of the container (V1) = 1.27 L (Approx)

Answer: 1.27 L

Explanation:

First, calculate the final number of moles of propane (n2) in the container.

n2 = n1 + nadded = 5.67 × 10^−2 mol + 2.95 × 10^−2 mol = 8.62 × 10^−2 mol

Rearrange Avogadro's law to solve for V1.

V1 = V2 × n1 / n2

Substitute the known values of n1, n2, and V2,

V1 = 1.93 L × 5.67 × 10^−2 mol / 8.62 × 10^−2 mol = 1.27 L

Answer:

Matter is composed of exceedingly small particles called atoms. An atom is the

smallest unit of an element that can participate in a chemical reaction.

Answer:

Chemical reaction.

Explanation:

Answer:

Atoms consist of a nucleus made of protons and neutrons orbited by electrons.

Isotopes are atoms that have same number of protons but they differ in the number of neutrons and in atomic mass.

Answer:

Isotopes are atoms that have the same numbers of protons but different numbers of neutrons. An ion is an atom that has gained or lost electrons, so it now has more or fewer electrons than it does protons. So an ion has a negative or positive charge.

Hope it helps :)

Add minisatellites. Hence, option C is correct.

Electrophoresis is a laboratory technique used to separate DNA, RNA or protein molecules based on their size and electrical charge.

You are a forensic scientist working on a murder case. You have taken the blood sample from the crime scene and put it through Electrophoresis and Southern blotting. you need to add minisatellites.

Hence, option C is correct.

Learn more about Electrophoresis here:

https://brainly.com/question/13949940

#SPJ2

Answer:

11 Protons

Explanation:

Na-23 shows the mass of the element as 23. Therefore subtract 12 neutrons from the mass to get # of protons which is = to atomic #.

The atomic number of 23-Na is 11. It can be calculated from the number of protons present in the nucleus of an atom.

The atomic number is a fundamental property of an element and represents the number of protons found in the nucleus of an atom. It uniquely identifies each element on the periodic table. In a neutral atom, the atomic number also indicates the number of electrons present in the atom, as the number of protons and electrons in an atom are equal.

For example, hydrogen has an atomic number of 1, indicating that it has one proton in its nucleus. Oxygen has an atomic number of 8, indicating that it has eight protons in its nucleus.

The atomic number determines the element's position in the periodic table and provides important information about its properties and behavior.

Learn more about Atomic number, here:

https://brainly.com/question/16858932

#SPJ6

Answer:

D- Assertion is false and Reason is true

Explanation:

Precipitation is said to have occurred when an insoluble product is formed from soluble ones. Let us take an instance;

BaCl2(aq) + H2SO4(aq) -------> BaSO4(s) + 2HCl(aq)

The barium sulphate so formed is an insoluble product obtained from the reaction of soluble barium chloride and sulphuric acid. This is a typical example of a double replacement reaction as the both ions exchanged partners.

Thus, the assertion is false but the reason is true.

Answer:

Molecule

Explanation:

Compounds are chemical substances comprising of two or more elements. The smallest particle contained in a compound is the MOLECULE. Molecules are combinations of atoms (same or different) of an element held together by a chemical bond.

Since a compound is a molecule with two or more elements combined, the chemistry of the molecules contained in a compound determines its chemical properties. This means that the molecules of a compound are responsible for the interactions of a compound in a chemical reaction. Examples of molecules are H2O, N2, O3 etc.

Answer:

b

Explanation:

Answer:

pH and pOH denote the negative log of the concentration of hydrogen or hydroxide ions. High pH means that a solution is basic while high pOH means that a solution is acidic. ... So here the basic definition of pH is that it's equal to negative log base 10 of the concentration of protons in your solution.

pH and pOH are inversely proportional to one another i.e. as one increases, the other decreases and vice versa.

pH and pOH are terms used to measure the level of acidity or alkalinity of a substance.

A basic solution has a pOH less than 7, while an acidic solution has a pOH greater than 7.

On the other hand, a basic solution has a pH greater than 7 while an acidic solution has a pH lesser than 7.

Therefore, it can be said that pH and pOH are related inversely i.e. as one decreases, the other increases.

Learn more about pH at: https://brainly.com/question/15289741

#SPJ9

Answer:

because water gas has high heat content more than producer gas

Explanation:

give brainliest plz

Answer:

The electronic configuration of ions formed are:

Li+ (2) => 1s2

Cl- (18) => 1s2 2s2 2p6 3s2 3p6

Explanation:

Lithium metal, Li will lose 1 electron to lithium ion Li+. Chlorine atom, Cl will receive the 1 electron to form the chloride ion Cl- as shown by the following equation below:

Li —> Li+ + e

Cl+ e —> Cl-

Combine both equation

Li + Cl + e —> Li+ + Cl- + e

Cancel out 'e'

Li + Cl —> Li+ Cl-

Thus, we can write the electronic configuration for the reaction as follow:

Before reaction:

Li (3) => 1s2 2s1

Cl (17) => 1s2 2s2 2p6 3s2 3p5

After reaction

Li+ (2) => 1s2

Cl- (18) => 1s2 2s2 2p6 3s2 3p6

Therefore, the electronic configuration of the ions formed are:

Li+ (2) => 1s2

Cl- (18) => 1s2 2s2 2p6 3s2 3p6

Explanation:

(a):their malleability:

>iron making. iron worker heat the meat and hammer it to give them the desired shape.

> in the jewelry making process, like the gold or silver you wear are results due to the malleability of metal

(b):their ductility:

>for the making of high tension cable that connects different cities for transferring of electricity.

>for making wire gauze

(c):their ability to conduct electricity:

>for lighting up your house with light bulbs

>for using cooking stoves

>to make refrigerator work.

Answer:

a)gold and silver-used to make jewellery

b)gold and copper(we draw them in wires easily because they are not brittle)

c)copper and iron(this is because both of them are metal and metaps are best conductors of electricity)

Explanation:

uses of copper- to make utensils

to make wires for circuits

uses of silver-to make jewellery

to make mirrors

malleability is the property of a meta in which the metal can be changed into different shapes.

Ductility-can be drawn into thin wires.

Answer:

2.22 x  10²³

Explanation:

first we have to find number of moles

mol = 10/27

mol= 0.37 mol

Now,

number of atoms = mole x 6 x 10²³

                             = 0.37 x 6 x 10²³

                            = 2.22 x  10²³

Answer:

3

Explanation:

6.07 has 3 digits and all are significant

Answer:

We don't know what solvent X and solvent Y are, but from the chart, we can see that in solvent X, hydrochloric acid can conduct electricity (bulb lights up), and react with calcium carbonate.

So, we can say the electrical conductivity when HCl is dissolved in solvent X is high, and when HCl is dissolved in solvent Y, the electrical conductivity is low (because light bulb doesn't light up).

Additionally, in solvent X, HCl ionizes, this shows the property of acids: reacts with carbonates to give CO2 (because CO2 reacts with lime water to make it cloudy).

In solvent Y, HCl does not ionize, so there is no reaction between acid and calcium carbonate.

Answer:

Movement of tiny particles called atoms, molecules and ions in a solids,liquid and gases. Heat energy can be transferred from one object to another. The transfer or flow due to the difference in temperature between the two objects is called heat.

Answer:

D; Iónico

Explanation:

El elemento con 8 protones es oxígeno, mientras que el elemento con 11 protones es sodio.

El sodio es un metal alcalinotérreo, mientras que el oxígeno no es un metal.

En general, cuando tenemos un elemento metálico como el sodio, que se une con uno no metálico como el oxígeno, el tipo de enlace formado como resultado de la transferencia completa de electrones desde la capa de valencia del sodio a la capa de valencia del oxígeno para completar su propia configuración de octeto se denomina enlace electrovalente o, más generalmente, enlace iónico

Answer:

The Grignard reagent will be destroyed

Explanation:

The Grignard reaction is based on a carbanion production (RMgX). If water is present in the glassware, a reaction can take place with [tex]H_2O[/tex] and the desired product will not be produced. Because an "H" would be transferred from water to the Grignard reagent. (See figure 1)

If we have acetone in the glassware we will have a similar problem. The Grignard reagent would be destroyed and the desired product will not be produced. The Grignard reagent will attack the carbon in the carbonyl group and the carbanion would disappear. (See figure 2)

Answer:

F

EXPLANATION

Among the given elements fluorine(F)can not lose electrons easily because of its high electron affinity, high nuclear charge and high electronegativity.

Answer:

F

Explanation:

it won't lose electron , rather it would gain electron to complete its octate......

Electronic Configuration of F = 2,7

So F will gain 1 electron ....

Answer:

The initial volume of the container was 1.27L

Explanation:

Avogadro's law states that under the same pressure and temperature, equal moles of gases occupies equal volume. The equation is:

V₁n₂ = V₂n₁

Where V is volume and n moles of 1, initial state and 2, final state.

In the problem, initial moles are 5.67x10⁻², final moles after the addition are:

5.67x10⁻² + 2.95x10⁻² = 8.62x10⁻² moles

And, after the addition, the volume is 1.93L.

Replacing in Avogadro's law:

V₁×8.62x10⁻² moles = 1.93L×5.67x10⁻² moles

V₁ = 1.27L

Answer:

[tex]\boxed{\mathrm{view \: explanation}}[/tex]

Explanation:

This is an irreversible reaction, we cannot derive any [tex]\mathrm{K_c}[/tex] expression for it. The [tex]\mathrm{K_c}[/tex] expression can only be derived for reversible reactions and not irreversible reactions. We cannot derive the [tex]\mathrm{K_c}[/tex] expression for this reaction.

Answer: c

Explanation: effusion because there is a movement of a gas through a small opening into a larger volume

At 17 celsius ❤️

it will start to boil ❤️

#indian❤️

Answer:

[tex]molarity =6.9\times 10^{-3}\ M\\[/tex]

Explanation:

We know that , the reaction of HCl and NaOH is given as follows

[tex]NaOH+HCl=NaCl +H_2O[/tex]

Given that

Pressure = 111 mm Hg

[tex]P=111\times 13.6\times 10^{-3}\times 9.81\times 1000=14.809\ kPa[/tex]

Temperature = 20°C

T=20+273=293 K

Volume= 221 m L

V=0.221 L

Number of moles of HCl is given as follows

[tex]n=\dfrac{P\times V}{R\times T}\\n=\dfrac{0.148\times 0.221}{0.821\times 293}=1.3\times 10^{-4}\ moles[/tex]

From the above reaction we can say that

Number of moles of HCl=Number of moles of NaOH

Volume of NaoH is given as follows

V=18.7 = 0.0187 L

Therefore molarity

[tex]molarity =\dfrac{n}{V_{NaOH}}\\molarity =\dfrac{1.3\times 10^{-4}}{0.0187}=6.9\times 10^{-3}\ M\\molarity =6.9\times 10^{-3}\ M\\[/tex]