Answer:
[tex]\boxed {\boxed {\sf 0.3 \ mol \ NaNO_3}}[/tex]
Explanation:
Molarity is a measure of concentration in moles per liter.
[tex]molarity= \frac{moles \ of \ solute}{liters \ of \ solution}[/tex]
The molarity of the solution is 1.2 M NaNO₃ or 1.2 moles NaNO₃ per liter. There are 0.25 liters of the solution. The moles of solute are unknown, so we can use x.
molarity= 1.2 mol NaNO₃/L liters of solution=0.25 L moles of solute =x[tex]1.2 \ mol \ NaNO_3/L= \frac{x}{0.25 \ L}[/tex]
We are solving for x, so we must isolate the variable, x. It is being divided by 0.25 liters. The inverse of division is multiplication, so we multiply both sides by 0.25 L.
[tex]0.25 \ L *1.2 \ mol \ NaNO_3/L=\frac{x}{0.25 \ L} *0.25 \ L[/tex]
[tex]0.25 \ L *1.2 \ mol \ NaNO_3/L=x[/tex]
The units of liters cancel, so we are left with the units moles of sodium nitrate.
[tex]0.25 *1.2 \ mol \ NaNO_3=x[/tex]
[tex]0.3 \ mol \ NaNO_3=x[/tex]
There are 0.3 moles of sodium nitrate.
How long will it take a 500-W heater to raise the temperature of 400 g of water from 15.0 °C to 98.0
°C?
Explanation:
E=(98-15)×400×4.2
E=139440J
t=E/P
E=139440/500=278.88s
hope it helps❣️
don't forget to mark me as brainliest and follow❣️
Three biologically important diatomic species, either because they promote or inhibit life, are
(a) CO,
(b) NO3 and
(c) CN-.
The first binds to hemoglobin, the second is a chemical messenger, and the third interrupts the respiratory electron transfer chain. Their biochemical action is a reflection of their orbital structure. Deduce their ground state electron configurations.
Answer:
See Explanation
Explanation:
We can write the molecular orbital configuration of molecules in the same way as we write the orbital electron configuration of atoms. The valence electrons in the molecule are filled into molecular orbitals of appropriate energy in accordance to the Aufbau principle.
For CO;
σ2s2, σ*2s2, Π2py2, Π2pz2, σ2px2
For NO;
σ2s2, σ*2s2, Π2px2, Π2py2, σ2pz2, Π*2px1
For CN-;
σ2s2, σ*2s2, Π2px2, Π2py2, σ2pz2
These are the ground state electron configurations of these molecules.
The enthalpy of solution of NaCl in water is about 3.88 kJ/mol. However, the solubility of NaCl in water is relatively high. Which statement about the entropy of the solution process explains why NaCl dissolves in water even though the process is endothermic?
a. the entropy increases when NaCl dissolves in water
b. the entropy remains the same when NaCl dissolves in water
c. the entropy decreases when NaCl dissolves in water
d. entropy has nothing to do with the solution process
We have that the statement that explains why NaCl dissolves in water even though the process is endothermic the given as,
The entropy increases when NaCl dissolves in water.Option A
HeatGenerally ,Sodium chloride is crystalline salt, when its dissolved is H20 , it dissociates its ion, the ions are scattered through out the solution which results in increased in randomness .
Therefore, the entropy increases when NaCl dissolves in water,
Option A
For more information on Heat visit
https://brainly.com/question/15267055
Magnesium metal reacts with oxygen gas
What is the initial appearance of Magnesium metal?
When Magnesium comes in contact with Oxygen, it reacts with Oxygen causing a layer of Magnesium Oxide on the metal. If Magnesium is burnt, it will cause a bright white light creating Magnesium Oxide.
The initial appearance of Magnesium is a ribbon with a layer of Magnesium Oxide.
Happy to help :)
If you need any more help feel free to ask
The chemical equation below is unbalanced.
NaOH + H3PO4 -> Na3PO4 + H2O
When the equation is correctly balanced, what will be the coefficient of H2O?
Answer:
3 NaOH (aq) + H3PO4 (aq) → Na3PO4 (aq) + 3 H2O (l)
Explanation:
This is an acid-base reaction (neutralization): NaOH is a base, H3PO4 is an acid.
When the equation is balanced, and the coefficient of H₂O is 3.
To balance the chemical equation:
NaOH + H₃PO₄ ⇒ Na₃PO₄ + H₂O
The number of atoms of each element is the same on both sides of the equation.
Balance the hydrogen atoms. There are three hydrogen atoms on the left side and two hydrogen atoms on the right side. To balance the hydrogen atoms, multiply H₂O by a coefficient of 3:
NaOH + H₃PO₄ ⇒ Na₃PO₄ + 3H₂O
If the oxygen (O) atoms are balanced. There are four oxygen atoms on the right side, but only two oxygen atoms on the left side. To balance the oxygen atoms, we need to multiply NaOH by a coefficient of 2.
To learn more about the chemical equation, follow the link:
https://brainly.com/question/28792948
#SPJ6
What element in group 1 is not considered an alkali metal?
A. Hydrogen (H)
B. Lithium (Li)
C. Potassium (K)
D. Cesium (Cs)
Answer:
A
Explanation:
Hydrogen isn't an alkali metal
Answer:
hydrogen
Explanation:
hydrogen is a gas not a metal
0.350 moles of H2O is equivalent to (blank amount) molecules of water.
Answer:
is has around 1/5 lyrics of water
Answer:
[tex]1 \: mole \: = \: 6.02 \times {10}^{23} \: molecules \\ 0.350 \: moles \: = \: (0.350 \times 6.02 \times {10}^{23} ) \: molecules \\ = 2.107 \times {10}^{23} \: molecules[/tex]
Give an example to illustrate the difference between "paying more in taxes ” and paying a higher tax rate .
What volume of solution is needed to prepare a 0.50M solution of sodium hydroxide using 2.0 g of solute? Show your work
Answer:
0.10 L
Explanation:
First we convert the 2.0 grams of solute (meaning sodium hydroxide) into moles, using its molar mass:
2.0 g ÷ 40 g/mol = 0.05 mol NaOHThen we can calculate the required volume of solution, using the definition of molarity:
Molarity = moles / litersliters = moles / molarity0.05 mol / 0.50 M = 0.10 LConvert a pressure of 250 torr to atm a) 0.266 atm b) 0.279 atm c) 0.329 atm d) 0.297 atm
Answer:
C
Explanation:
1atm=760torr
X=250torr
Cross multiply
760torrX=250torr*atm
Divide both sides by 760torr
X=250torr*atm/760torr
X=0.32895atm
X=0.329atm
Option C is collect
Which of the following substances dissolves most easily in a non polar solvent?
a. NH3
b. H2O
c. NaCl
d. O2
e. BaSO4
Answer:
its e
Explanation:
A piece of wood has a mass of 36g and measures 3cm X 6cm X 4cm. What is the density of the wood? Would the piece of wood float or sink in water?
Answer:
Explanation:
The density is
1.1 g c m 3 .
The elements in the periodic table are not always represented by
the first one or two letters in their names. What are some examples of
this (list three)?
Unnillium (101)
Unnilbium (102)
Unniltrium (103)
Unnilquadium (104)
Unnilpentium (105)
Unnilhexium (106)
Unnilseptium (107)
Unniloctium (108)
Unnilennium (109)
Ununnillium (110)
A solution is prepared by dissolving 16.90 g of ordinary sugar (sucrose, C12H22O11, 342.3 g/mol) in 40.90 g of water. Calculate the boiling point of the solution. Sucrose is a nonvolatile nonelectrolyte.
Answer:
Explanation:
The boiling point will increase due to dissolution of sugar in water . Increase in boiling point ΔT
ΔT = Kb x m , where Kb is molal elevation constant water , m is molality of solution
Kb for water = .51°C /m
moles of sugar = 16.90 / 342.3
= .04937 moles
m = moles of sugar / kg of water
= .04937 / .04090
= 1.207
ΔT = Kb x m
= .51 x 1.207
= .62°C .
So , boiling point of water = 100.62°C .
Which is the best description of a cyclone?
a dust storm
rapidly changing weather in an area
a type of tornado
an area of low air pressure
How many moles of iron are needed to produce 10 moles of Fe2O3
Answer:
20 moles of Iron are needed
Explanation:
In 1 mole of Iron (III) oxide, Fe₂O₃, there are 2 moles of Iron, Fe. The equation that we can write is:
2 moles Fe = 1 mole Fe₂O₃
To find the moles of iron that are needed to produce 10 moles of Fe₂O₃ we must use this equation as follows:
10 moles of Fe₂O₃ * (2 moles Fe / 1mole Fe₂O₃) =
20 moles of Iron are neededPlease help I need the answer now!!!
Answer:
The answer is A: (more below)
Liquid A: Neutral
Liquid B: Acid
Liquid C: Base
Explanation:
Ph scale: 1 - 6 are acids, 7 is neutral, 8 - 14 are bases.
14
13
12
11
10
9
8
7
6
5
4
3
2
1
Mixed Practice:
For questions 6-9, you may not have to use your entire flow chart. Decide where to start and end using your flow chart.
4NH3 + 5O2 → 4NO + 6H2O
MM NH3 = 17.04 g/mol; MM O2 = 32 g/mol; MM NO = 30.01 g/mol; MM H2O = 18.02 g/mol
In the above reaction, how many moles of NO are formed if 824 g of NH3 react?
27.5 mol
3510 mol
48.4 mol
774 mol
Given
Mass of NO - 824 g
Molar mass of NO - 30.01g/mol
No of moles of NO = Given mass/Molar mass
No of moles of NO = 824/30.01= 27.45 mole
Hence 27.5 moles of NO are formed!
How many sigma bond and pi bond are present
Lesson 17 Conservation of Momentum grade 9 I want the answer.
Answer:
1) 1.5 kg
2) 0.6 kg
Explanation:
[tex](3)(30) = 60m, m = 90/60 = 1.5[/tex] kg
[tex](0.8)(15) = 20m, m = 12/20 = 0.6[/tex] kg
What is Climate Change and how can it effect plants?
Answer:
Climate change will make plants—and us—thirstier. The combined effects of increased CO2 levels and warmer temperatures will increase water consumption by vegetation. That will lead to water declines in streams and rivers like the Ashepoo River in South Carolina
Explanation:
9.When two protons combine to form one nucleus, the result is one proton and one
neutron. How did the one proton become a neutron?
Answer:
josephmelichar
Explanation:
In the first step, 2 protons combine. In doing so one of the protons will convert into a neutron by losing a positron (positive electron) and a neutrino; this is also known as beta decay. This changes one of the protons (positive charge) into a neutron (neutral charge) and allows the two particles to combine.
In 1773 Benjamin Franklin, investigating the calming effect of oil on the water of a pond near London, observed that a teaspoonful of oil would cover about half an acre of the surface. From this information, estimate the height or thickness of an oil molecule in the floating film of oil. Then estimate the cross sectional area of an oil molecule in the floating film You may assume that Franklin used a lamp oil, like camphene, C10H16.
Required:
Calculate the thickness (in nm) of the surface film and the surface area (in nm2) occupied by an oleic acid molecule on water.
Answer:
a. 2.44 nm
b. 15.33 nm²
Explanation:
a. Calculate the thickness (in nm) of the surface film
Since the volume of a teaspoon equals V = 4.93 cm³ and the area of the oil film is half an acre = 1/2 × 4046.86 m² = 2023.43 m²
The volume of the oil film, V' equals the volume of the oil in the teaspoon, V
V' = Ah where A = cross-sectional area of oil film = 2023.43 m² = 2023.43 × 10⁴ cm² and h = height of oil film
So, V' = V
Ah = V
h = V/A
= 4.93 cm³/2023.43 × 10⁴ cm²
= 0.00244 × 10⁻⁴ cm
= 2.44 × 10⁻⁷ cm
= 2.44 × 10⁻⁷ cm × 1m/100 cm
= 2.44 × 10⁻⁹ m
= 2.44 nm
b. The surface area (in nm2) occupied by an oleic acid molecule on water.
Since the height of the oil film equals the diameter of the oil molecule, and the molecule is assumed to be a sphere of radius, r. Its surface area is thus A = 4πr²
r = h/2 = 2.44 nm/2 = 1.22 nm
A = 4πr²
A = 4π(1.22 nm)²
A = 4.88π nm²
A = 15.33 nm²
a sample of mg(hco3)2 contains 1.8 moles of oxygen atom find the number of carbon atoms in the given sample
please solve fast very much urgent
Answer:
0.60 moles of atoms of carbon
Explanation:
Step 1: Given data
Chemical formula of the compound: Mg(HCO₃)₂Moles of oxygen atoms: 1.8 molesStep 2: Calculate the number of carbon atoms in the given sample
According to the chemical formula of the compound, the molar ratio of C to O is 2:6, that is, there are 2 moles of atoms of C every 6 moles of atoms of O. The number of moles of atoms of C is:
1.8 mol O × 2 mol C / 6 mol O = 0.60 mol C
A hot metal plate at 150°C has been placed in air at room temperature. Which event would most likely take place
over the next few minutes?
O Molecules in both the metal and the surrounding air will start moving at lower speeds.
O Molecules in both the metal and the surrounding air will start moving at higher speeds.
O The air molecules that are surrounding the metal will slow down, and the molecules in the metal will speed up.
O The air molecules that are surrounding the metal will speed up, and the molecules in the metal will slow down.
Answer: The event air molecules that are surrounding the metal will speed up, and the molecules in the metal will slow down would most likely take place over the next few minutes.
Explanation:
A process in which heat is evolved is called an exothermic process.
When hot metal plate at [tex]150^{o}C[/tex] is placed in air at room temperature then heat is given off by the metal plate due to which there will occur a decrease in kinetic energy of its molecules.
As a result, molecules in the metal will slow down.
Whereas heat is absorbed by the air molecules from the metal due to which kinetic energy of air molecules will increase.
Thus, we can conclude that the event air molecules that are surrounding the metal will speed up, and the molecules in the metal will slow down would most likely take place over the next few minutes.
What is the molarity of a solution that contains 152 g NaCl in 4.00 L solution?
Answer:
200.0lg
Explanation:
please give a brainliest
How much energy is contained in the six-cookie serving size recommended on the label?
Monounsaturated Fat 1g
How did oxygen first enter Earth's atmosphere?
A. Meteorite impacts
B. Breakdown of Precambrian rocks
C. Biological processes
D. Volcanic outgassing
Answer:
I think c biological processes
A 24.0 gram sample of copper was
ncated from 25.0°C to 500.0°C 43783
of heat were absorbed, what is the
Specific_heat of copper?
Answer:
3.84 J/g°C
Explanation:
Using the formula as follows:
Q = m × c × ∆T
Where;
Q = amount of heat (J)
m = mass of substance
c = specific heat of copper
∆T = change in temperature (°C).
Based on the provided information;
Q = 43783J
m = 24g
∆T = 500°C - 25°C = 475°C
c = ?
Using Q = m × c × ∆T
43783 = 24 × c × 475
43783 = 11400c
c = 43783 ÷ 11400
c = 3.84 J/g°C
Partial pressure of oxygen dissolved in blood is 50 mm Hg. That means that:
1. It exerts a force per cm^2 equal to that of a column of mercury with 1 cm^2 base and 50 mm height
2. It would be in equilibrium with gaseous oxygen that is at partial pressure of 50 mm Hg
3. Both (1) and (2)
4. Neither (2) or (2)
Answer:
The answer is "Option 2".
Explanation:
In this question, the balance with a partial 50 mm Hg pressure of gassing oxygen.In this, the base value is given in the cm that is incorrect because it is measured in mm.In this, the partial pressure of gas in the liquid is equal to the pure pressure of the gas.