A substance has a freezing point of -36 degree C and a boiling point of 356 degree C. At what temperature would this substance be in its liquid state?
Answer:
Between -35 degrees C and 355 degrees C
Explanation:
At any temperature between, but not including the freezing and boiling points, the substance would be in its liquid state.
Which of the following is true about inertia
Select the correct response:
O It is not related to the mass of an object
It can be calculated by dividing distance by time
It is the resistance of an object to changes in its motion
It is a force
Answer:
The correct answers are It is the resistance of an object to changes in its motion, and It is a force
Please help me!!!
The prompt says
Write a scientific explanation that relates the amplitude of the wave to the energy of the wave
What could damage the eardrum and bones of the middle ear?
a) earwax
b) harmful noise
c) hammer
d) anvil
Answer:
B or D
Explanation:
I wanna say B but I don't really know if it's a trick question
my explanation for D is that anvils are usually 110 decibles and ear drums usually are damaged when exposed to 82dbs or higher at a consistant rate so I'd imagine that'd be the answer I hoped this helped
Answer:
the answer is B
Explanation:
Any harmful noises can be bad. yes, an Anvil and Hammer can be bad but so can explosions and gun fire and having music to loud
Can you describe how and why the molecules move from one side to the other?
The molecules move from one side to another across the concentration gradient by breaking weaker bonds among the atom into stronger bonds. This is done to decrease the overall kinetic energy to become a more stable molecule.
The kinetic strength of the molecules consequences in random movement, causing diffusion. In simple diffusion, this method proceeds without the useful resource of a transport protein. it is the random motion of the molecules that reasons them to move from a place of excessive attention to a place with decreased awareness.
The molecules in a gas, a liquid, or a strong are in consistent movement due to their kinetic electricity. Molecules are in steady movement and collide with each different. those collisions cause the molecules to move in random guidelines. over time, however, greater molecules may be propelled into the less concentrated place.
The majority of the molecules flow from better to decrease awareness, although there can be some that circulate from low to excessive. the general (or net) motion is consequently from high to low concentration.
Learn more about molecules here:-https://brainly.com/question/26044300
#SPJ1
Kepler's second law states that a line from the sun to a planet sweeps out equal areas in equal times. 2 d coordinate system with an elliptical orbit of planet around the sun. The elliptical orbit is centered at the origin. The Sun is located on the x axis between the origin and the far left edge of the orbit. The Planet is on the orbital path in the first quadrant and has a velocity vector that is pointing counter-clockwise on the orbital path. There is a line connecting the sun and the planet. The Perihelion is marked as the point where the orbit crosses the x axis closest to the Sun. The Aphelion is marked as the point where the orbit crosses the x axis farthest away from the Sun. The aphelion is the point in the orbit where the planet is the furthest distance from the sun, The perihelion is the point at which the planet is closest to the sun. At which point must the speed of the planet be greater
Answer:
the speed is higher in the PERIHELIUM
Explanation:
As stated in your statement, Kepler's second law says that a vector from the sun to the planet also sweeps equal in equal times. This is a consequence that the sun-planet system is isolated, therefore the angular momentum is conserved.
L = r x p = m r x v
where m is the planet mass and the Sun is considered fixed
Let's analyze this expression, if the anglar momentum is a constant when r is less (perihelion) the speed must increase, so that the product remains fixed
So the speed is higher in the PERIHELIUM
A wave is introduced into a thin wire held tight at each end. It has an amplitude of 3.8
cm, a frequency of 51.2 Hz and a distance from a crest to the neighbouring trough of
12.8 cm. Determine the period of such a wave.
this is in my physics I haven't touched on waves in so long. just can't figure it out could someone help me?
Explanation:
[tex]period = 1 \div frequency[/tex]
frequency is given
calculate the time period from this
HELP ME PLEASE!! I WILL MARK BRAINLIEST!!!!
Answer:
1/2 of your plate
Explanation:
C. is the answer because its 1/2 of your plate my opinion is that correct me if im wrong
(◠‿・)
Light bends when it changes the medium because the dielectric permittivity of the material makes the path more hard to penetrate
Answer:
The statement is true
Explanation:
The complete question is
Light bends when it changes the medium because the dielectric permittivity of the material makes the path more hard to penetrate
True or False
Solution
The given statement is true as it is the dielectric permittivity of the material which does not allow light to pass through it easily.
The medium decrease the amplitude of light and hence induces change in direction without altering its velocity or frequency.
This was merely an accident and I did not mean to post a question.
Answer:
ok a good rest of your day
Explanation:
5. List five materials that we use in compost?
Leaves.
Grass clippings.
Brush trimmings.
Manure (preferably organic)
Any non-animal food scraps: fruits, vegetables, peelings, bread, cereal, coffee grounds and filters, tea leaves and tea bags (preferably minus the staples)
Old wine.
How do mirrors and lenses compare in their interaction with light?
A. Mirrors spread light apart; lenses do not.
B. Mirrors bounce light from their surfaces; lenses do not.
C. Mirrors bend light as it passes through; lenses do not.
D. Mirrors bring light to a point; lenses do not.
Answer:
mirrors bounce back light but lenses absorbs light
Mirrors and lenses compare in their interaction with light is that Mirrors bounce light from their surfaces; lenses do not. Hence option B is correct.
What is Reflection ?Reflection is the change of direction of the wave at the interface which separates two media. it get incident on the other media and get return to the same media is called as reflection. Common examples include the reflection of light, sound and water waves.
Mirror is a type of glass to which a silver layer is coated on the back side and on the silver layer any type of paint is painted.
We can see that in the dark room when we incident light on the mirror, the direction of the light changes at the point of the incidence. in the scientific language we can say that light has reflected from the surface of the mirror. in this case angle of incidence is always equal to angle of reflection. Light get bounce off from the mirror into same medium as it was incident.
convex lens focuses all the light falling on it to a focus of the lens and concave lens diverges all the light, it do not bounce back the light.
Hence option B is correct.
To know more about mirror :
https://brainly.com/question/1160148
#SPJ7.
Find the displacement in meters a runner would travel in 5 hours at an average velocity of 12km/h to the southwest
*show you work pleasee*
]
Answer:
60,000m
Explanation:
Convert km/h to m/s by multiplying with 1000/3600.
Convert hours to seconds by multiplying with 3600.
Because displacement is a vector quantity and deals with the shortest distance between points, simply plug it into the equation s=vt.
A 5kg bass (fish) gliding East at 6m/s swallows a stationary 1.5kg perch (smaller fish). How fast is the bass moving after swallowing the perch?
Answer:
4.6 m/s is how fast the bass moves after swallowing the perch
Renewable energy resources like solar energy and wind power are still too expensive to be practical on a large scale. True or False?
Answer: False
Explanation:
1. Which term is the name given to the underwater mountains in the
middle of oceans? *
mid-ocean crust
mid-ocean mountas
mid-ocean ridges
mid-ocean basins
Answer:
The name given to the underwater mountains in the middle of oceans is;
Mid-ocean ridges
Explanation:
Mid-ocean ridges, also known as mid-oceanic ridge is a mountain range made by plate tectonics under the water.
The magma created at a divergent boundary where two tectonic plates meet due to the rise of convection currents in the Earth's mantle which is beneath the oceanic crust results in the uplifting of the ocean floor.
Easy Guided Online Tutorial A special electronic sensor is embedded in the seat of a car that takes riders around a circular loop-the-loop ride at an amusement park. The sensor measures the magnitude of the normal force that the seat exerts on a rider. The loop-the-loop ride is in the vertical plane and its radius is 21 m. Sitting on the seat before the ride starts, a rider is level and stationary, and the electronic sensor reads 770 N. At the top of the loop, the rider is upside down and moving, and the sensor reads 350 N. What is the speed of the rider at the top of the loop?
Answer:
v = 17.30 m / s
Explanation:
For this exercise we will use Newton's second law
at the bottom of the loop and stopped
∑ F = 0
N-W = 0
N = W
W = 770 N
the mass of the body is
W = mg
m = W / g
m = 770 / 9.8
m = 78.6 kg
on top of the loop and moving
∑ F = m a
N + W = m a
note that the three vectors go in the same vertical direction down
the centripetal acceleration is
a = v² / r
we substitute
N + W = m v² / r
v = [tex]\sqrt{(N+W) \frac{r}{m} }[/tex]
let's calculate
v = [tex]\sqrt{ (350+770) \frac{21}{78.6} }[/tex]
v = 17.30 m / s
A 8.57-m ladder with a mass of 21.4 kg lies flat on the ground. A painter grabs the top end of the ladder and pulls straight upward with a force of 258 N. At the instant the top of the ladder leaves the ground, the ladder experiences an angular acceleration of 1.63 rad/s2 about an axis passing through the bottom end of the ladder. The ladder's center of gravity lies halfway between the top and bottom ends. (a) What is the net torque acting on the ladder
Answer:
[tex]1311.5\ \text{Nm}[/tex]
Explanation:
l = Length of ladder = 8.57 m
m = Mass of ladder = 21.4 kg
F = Force on ladder = 258 N
[tex]\alpha[/tex] = Angular acceleration = [tex]1.63\ \text{rad/s}^2[/tex]
g = Acceleration due to gravity = [tex]9.81\ \text{m/s}^2[/tex]
Net torque is given by
[tex]\tau=lf-\dfrac{l}{2}mg\\\Rightarrow \tau=8.57\times 258-\dfrac{8.57}{2}\times 21.4\times 9.81\\\Rightarrow \tau=1311.5\ \text{Nm}[/tex]
The net torque acting on the ladder is [tex]1311.5\ \text{Nm}[/tex].
8.How long is a day? A year?
Answer:
24 hours. 365 days
Explanation:
lodine-131 has a half life of about 8 days. If you had 60 grams of , how much would remain after 24 days?
Answer:
7.5 grams
Explanation:
From the question,
(R/R')ᵇ = 2ᵃ.................... Equation 1
Where b = half life, R = Original mass of iodine, R' = Remaining mass of Iodine after disintegration, a = Total time taken.
⇒ R/R' = 2ᵃ/ᵇ............... Equation 2
Given: R = 60 grams, a = 24 days, b = 4 days
Substitute these values into equation 2
60/R' = 2²⁴/⁸
60/R' = 2³
R' = 60/2³
R' = 60/8
R' = 7.5 grams
580 nm light shines on a double slit with d=0.000125 m. What is the angle of the third dark interference minimum (m=3)?
(Remember, nano means 10^-9.)
(Unit=deg)
Answer:
0.66 degrees
Explanation:
The computation of the angle of the third dark interference is shown below:
The condition of the minima is
Path difference = (2n +1) × [tex]\lambda[/tex]÷ 2
For third minima, n = 2
Now
xd ÷ D = (2 × 2 + 1) × [tex]\lambda[/tex]÷ 2
d tan Q_3 = 5[tex]\lambda[/tex] ÷ 2
tan Q_3 = 5[tex]\lambda[/tex] ÷ 2d
Q_3 = tan^-1 × (5[tex]\lambda[/tex] ÷2d)
= tan^-1 × (5 × 580 × 10^-9) ÷ (2 × 0.000125)
= 0.66 degrees
A volleyball of mass 0.28 kg is dropped from the top of the bleachers (height equals 12 m). What is the speed of the volleyball right before it hits the gym floor?
Answer:
hope this help pls give me brainless
The speed of the volleyball with a mass of 0.28 kg and height of 12 m will be 15.336 m/s.
What is Speed?
Speed is the rate of change of distance of an object with respect to time. Speed is a scalar quantity as it has only magnitude and no direction. The SI unit of speed is meter per second (m/s).
PE = KE
Potential Energy = Kinetic energy
mgh = 1/2 mv²
where, m is the mass of object,
g is the acceleration due to gravity,
h is the height of the object,
v is the speed of the object
gh = 1/2v²
2gh = v²
v = [tex]\sqrt{2gh}[/tex]
v = [tex]\sqrt{2(9.8)(12)}[/tex]
v = [tex]\sqrt{235.2}[/tex]
v = 15.336 m/s
Therefore, the speed of the volleyball will be 15.336 m/s.
Learn more about Speed here:
https://brainly.com/question/28224010
#SPJ2
Can anyone help me!!!
I need this really soon!!!!
Q. Rama's weight is 40kg . She is carrying a load of 20 kg up to a height of 20 metres. What work does she do? Also mention the type of work
Also show step by step explanation. please!!
No links!!!!
No spams!!!!
Answer:
W = 1,176 10⁴ J
Explanation:
Work is defined by
W = F . d
bold indicates vectors
W = F d cos θ
In this case we must find the force to raise the load and the branch, suppose that the rate of rise is constant, this is the most common case
Σ F = 0
F - W₁ - W₂ = 0
where W1 is the weight of the branch and w2 wl weight of the load
F = (m₁ + m₂) g
This force is directed upwards and the displacement is upwards, therefore the angle is zero and the cos 0 = 1
we substitute in the work equation
A = (m₁ + m₂) g d
let's calculate
W = (40 + 20) 9.8 20
W = 1,176 10⁴ J
This is the work done by the external force
The thermal energy used by heater in 3 minutes is used to melt wax.Melting point of solid wax is 60.Specific heat of wax is 220j/g.Heater supplies 7700j of energy,how much wax melts?
Answer:
m = 35 g
Explanation:
The specific heat of a material can be calculated by the following formula:
[tex]C = \frac{Q}{m}\\[/tex]
where,
C = Specific Heat of Wax = 220 J/g
Q = Amount of Heat Supplied by the Heater = 7700 J
m = mass of wax melted = ?
Therefore,
[tex]220\ J/g = \frac{7700\ J}{m}\\\\m = \frac{7700\ J}{220\ J/g}\\[/tex]
m = 35 g
Un coche que lleva una velocidad constante de 90 km/hora durante 2 horas ¿Cuánto espacio recorre?Si encuentra un obstáculo en la carrera y tiene que parar 10 segundos calcula la aceleración
Answer:
(i) El coche recorre 180 kilómetros.
(ii) El coche decelera a razón de 2.5 metros por segundo al cuadrado.
Explanation:
El problema se divide en dos partes. La primera es el coche viajando a velocidad constante y la segunda consiste en una decelaración hasta alcanzar el reposo.
Primera parte - Viaje a velocidad constante
La distancia recorrida por el coche se calcula mediante la siguiente ecuación cinemática:
[tex]x = v\cdot t[/tex] (1)
Donde:
[tex]x[/tex] - Distancia recorrida, en kilómetros.
[tex]v[/tex] - Velocidad, en kilómetros por hora.
[tex]t[/tex] - Tiempo, en horas.
Si sabemos que [tex]v = 90\,\frac{km}{h}[/tex] y [tex]t = 2\,h[/tex], entonces la distancia recorrida por el coche es:
[tex]x = v\cdot t[/tex]
[tex]x = 180\,km[/tex]
El coche recorre 180 kilómetros.
Segunda parte - Deceleración
Asumiendo que la deceleración del coche es constante, se determina mediante la siguiente ecuación cinemática:
[tex]a = \frac{v-v_{o}}{t}[/tex] (2)
Donde:
[tex]v_{o}[/tex] - Velocidad inicial, en metros por segundo.
[tex]v[/tex] - Velocidad final, en metros por segundo.
[tex]t[/tex] - Tiempo, en segundos.
Si sabemos que [tex]v_{o} = 25\,\frac{m}{s}[/tex], [tex]v = 0\,\frac{m}{s}[/tex] y [tex]t = 10\,s[/tex], entonces la deceleración experimentada por el coche es:
[tex]a = -2.5\,\frac{m}{s^{2}}[/tex]
El coche decelera a razón de 2.5 metros por segundo al cuadrado.
Series circuit when you had one bulb and battery voltage was at 9 volts, what was current into battery?
1) .90amps
2) .40amps
3) .30 amps
Answer:
incomplete question, resistor must be there
Explanation:
GODDAMITT HELPPPPPP ! Plz.
If you slow the motion of water molecules down, they are more likely to become
A)
a gas
B)
hotter
O
colder
D
absorbed
HELP ASAP PLZ
Carbon-11 undergoes radioactive decay. Which particle correctly completes
the equation to show that the numbers of nucleons on each side of the
equation are equal?
IPC 'B+ ?
O A. Le
O B. He
O c. He
Doe
Answer:
d
Explanation:
the atomic number and the mass number must not change. so you're just looking for the particle that makes the numbers on both sides the same
Answer:
D
Explanation:
Ap3x
A or B??????????????