Answers
Answer:
the correct answer is commensalism
Related Questions
5. Make a graph: Plot your data on the graph to the right of the data table. Draw a line to conn points in order.
Answers
Answer:
i did c
Explanation:
A scientist prepares 500.0 L of gas at 0.921 atm pressure
and 200.0°C. The scientist transfers the gas into a tank
where it cools to 20.0°C and has a pressure of 30,0 atm.
What is the volume of the gas under these conditions?
I
Answers
Answer:
200.0°C.
Explanation:
The resulatant volume of gas under given conditions is 9.49 liters.
What is ideal gas equation?Ideal gas equation gives idea about the behavior of gases at different conditions and it will be represented as:
PV = nRT, where
P = pressure in atm
V = volume in L
n = moles of gas
R = universal gas constant = 0.082 L.atm/K.mol
T = temperature in K
First we calculate the moles of gas by putting the values according to the first condition in the above equation and we have
n = (0.921)(500) / (0.082)(473) = 11.86 moles
Now we calculate the volume of gas by using the above equation and details of the second condition as:
V = (11.86)(0.082)(293) / (30) = 9.49 L
Hence resultant volume of the gas is 9.49L.
To know more about ideal gas equation, visit the below link:
https://brainly.com/question/555495
#SPJ2
Explain how the cardiovascular system helps your body function
Answers
Answer:
The blood circulatory system (cardiovascular system) delivers nutrients and oxygen to all cells in the body. It consists of the heart and the blood vessels running through the entire body. The arteries carry blood away from the heart; the veins carry it back to the heart.
Explanation:
You're welcome!
Stay Safe!
What volume would a sample of gas occupy in LITERS at 0.985 atmospheres and a volume of 3.65 liters if the pressure were raised to 861.0 mmHg?
Answers
Answer:
3.18 L
Explanation:
Step 1: Given data
Initial pressure (P₁): 0.985 atmInitial volume (V₁): 3.65 LFinal pressure (P₂): 861.0 mmHgFinal volume (V₂): ?Step 2: Convert P₁ to mmHg
We will use the conversion factor 1 atm = 760 mmHg.
0.985 atm × 760 mmHg/1 atm = 749 mmHg
Step 3: Calculate the final volume of the gas
Assuming ideal behavior and constant temperature, we can calculate the final volume using Boyle's law.
P₁ × V₁ = P₂ × V₂
V₂ = P₁ × V₁/P₂
V₂ = 749 mmHg × 3.65 L/861.0 mmHg = 3.18 L
What is the pH of a 0.0001 M aqueous solution of HCI?
Answers
-log(0.0001)=4
1) A 45.7 g sample of glass was brought to thermal equilibrium with boiling water and then transferred to 250.0 g of water that was at 22.5 °C. This combination reached thermal equilibrium at 24.2 °C. What is the specific heat capacity of glass?
2) What mass of silver at 100.0 °C, when added to 150.0 g of water at 21.0 °C, would raise the water’s temperature to 24.0 °C ?
3) The molar heat of fusion of H2O is 6.1 kJ/mole. What amount of energy would be needed to melt 376 g of ice at 0.0 °C?
Answers
1) A 45.7 g sample of glass was brought to thermal equilibrium with boiling water and then transferred to 250.0 g of water that was at 22.5 °C. This combination reached thermal equilibrium at 24.2 °C. What is the specific heat capacity of glass?
2) What mass of silver at 100.0 °C, when added to 150.0 g of water at 21.0 °C, would raise the water’s temperature to 24.0 °C ?
3) The molar heat of fusion of H2O is 6.1 kJ/mole. What amount of energy would be needed to melt 376 g of ice at 0.0 °C?
which two things cause the orbits of the planets to be the nearby circular
Inertia
gravity
electricity
magnetism
Answers
Answer:Gravity and inertia
which deflects winds to the right or left
Answers
Answer:
right
Explanation:
the air that circulates to the right is deflected, because of the earths gravitational rotation, and how its tilted.
This question is about acids and bases.
Which ion is found in all acids?.
CI-
H
Nat
OH-
Answers
Answer:
OH- is the correct answer
mark me brainst answer
Answer:
h
Explanation:
The common ion in all acids is the hydrogen or hydronium ion
Will mark brainly
ASAP thank you if you solve this
Answers
The reaction of perchloric acid (HClO4) with lithium hydroxide (LiOH) is described by the equation: HClO4 + LiOH → LiClO4 + H2O Suppose 100 mL of perchloric acid is neutralized by exactly 46.9 mL of 0.75 M lithium hydroxide. What is the concentration of the perchloric acid?
Answers
Answer:
[HClO₄] = 0.35 M
Explanation:
Neutralization reaction is:
HClO₄ + LiOH → LiClO₄ + H₂O
In this case, we have a titration between a weak acid and a strong base.
In chemistry it is also called an acid base equilibrium.
HClO₄ + H₂O ⇄ ClO₄⁻ + H₃O⁺ Ka
The weak acid is firstly neutralized by the strong base, in order to have a buffer solution before the equivalence point.
When we reach the equivalence point, mmoles of acid = mmoles of base and there is a formula to determine it so:
M acid . Volume of acid = M base . Volume of base
M acid . 100 mL = 0.75 M . 46.9 mL
M acid = (0.75 M . 46.9 mL) / 100 mL → 0.35 M
WILL MARK BRAINLIEST
Answers
Answer:
B) inertia
Explanation:
Sorry if wrong
—
A- free fall is when an item falls freely
B- when an item remains still, unless it is forced
C- momentum is the quantity of motion of a making body
D- maximum velocity of an object
Hope this helps
Haley has been having difficulty breathing. She is having difficulty with the gas exchange in the respiratory system. Which organ is being affected?
Answers
Answer:
Lungs.
Explanation:
This is because the lungs are respiratory organs in the body that are located at the either side of the thorax or chest. These are organs that are incharge of exchange of gases. The air is breathe in through the trachea i.e oxygen is inhaled and carbondioxide which is the waste product is exhaled. Gas exchange take place in the lungs.
A balloon is placed in a vacuum chamber (a container that all of the air can be pumped out of) and as the air is removed, the balloon increases in size/volume. This is an example of which gas law?
Charles' Law
Boyle's Law
Gay-Lussacs Law
Grant's Law
Answers
Answer:
Boyle's Law
Explanation:
"Boyle's law, also referred to as the Boyle–Mariotte law, or Mariotte's law, is an experimental gas law that describes how the pressure of a gas tends to increase as the volume of the container decreases."
-Wikipedia
Define the term metal ore
Answers
Answer:
Ore is a deposit in Earth's crust of one or more valuable minerals. The most valuable ore deposits contain metals crucial to industry and trade, like copper, gold, and iron
The naturally occurring material from which a mineral or minerals of economic value can be extracted.
Contains a nonmetal and metal
A) base
B) acid
C) covalent bond
D) salt
Answers
Sodium(metal) and chloride(nonmetal)
The gills, Y, of a fish are usually near external openings that allow water
to flow in and out of them. They also usually have many folds, which
increases their surface area. Using the diagram and this information, how
have gills most likely allowed fish to adapt to living underwater?
A.
They allow the fish to easily take in dissolved oxygen
B.
They allow the fish to filter food from the water
C.
They allow the fish to filter carbon dioxide out of the water
D.
They allow the fish to sense predators
Answers
Please help as soon as possible
The molecules of which of the following would have the most kinetic energy?
A
boiling water
B
a cold glass of water
C
a warm cup of tea
D
an ice cube
Answers
D) an ice cube
Answer:
A
boiling water
Explanation:
The boiling point of water is 212 degrees F. Due to the temperature of the water being this high, the particles are sped up since heat increases kinectic energy.
Why is there a bond between the ions in potassium chloride
Answers
Answer:
Explanation:
When the two atoms are in contact, potassium transfers its outer electron to chlorine which readily accepts it, resulting in both atoms achieving a state of eight outermost electrons. With this electron transfer, the ionic bond in KCl is formed.
Hope this helped!!!
Potassium has just one valence electron and Chlorine has 7 electrons, Chlorine needs just one atom to complete its octet which is provided by Potassium atom for formation of Potassium Chloride (KCl).
What is Chemical Bonding?Chemical bonding is the formation of chemical bonds present between two or more atoms or molecules which give rise to new compound. Bond is formed from electrostatic force present between oppositely charged ions like in ionic bonds or by sharing of electrons like in covalent bonds.
There are two types of Chemical Bonding:
1. Ionic Bonding
It is formed between opposite charged particles like Anion (negatively charged) and Cation (Positively charged) by the strong force of attraction.
For example, KCl formed by the ionic bond formation present between Potassium and Chlorine
2.Chemical Bonding
It is formed between two atoms for completing its octet by sharing of electrons.
For example, [tex]H_2[/tex] formed by sharing the electrons to complete its electronic configuration.
Thus, Potassium has just one valence electron and Chlorine has 7 electrons, Chlorine needs just one atom to complete its octet which is provided by Potassium atom for formation of Potassium Chloride (KCl).
Learn more about Chemical Bonding, here:
https://brainly.com/question/15444131
#SPJ2
HELP ME !!!!!!!
How much kinetic energy does an 8 Kg bowling ball have when it is thrown at 9 m/s down the alley?
A. 324 J
B. 36 J
C.705.6 J
D.324 energies
Answers
Answer:
A. 324 J
Explanation:
HELLLPPPPPP PLSSSSSSS!!!!
Answers
solid: definite shape and definite volume.
liquid: changing shape and definite volume.
gas: changing shape and changing volume.
hope this helps!!
What is a covalent compound?
A.a compound with a metal and a nonmetal ion sharing valence electrons
B.stable group of multiple metal nuclei sharing valence electrons
C.a compound with nonmetal ions transferring valence electrons
D.a stable group of more than one type of atom bonded by bonding electron pairs
Answers
A covalent compound is a compound with a metal and a nonmetal ion sharing valence electrons (option A).
What is a covalent compound?A covalent compound is a molecule formed by covalent bonds, in which the atoms share one or more pairs of valence electrons.
Covalent bond is a type of chemical bond where two atoms are connected to each other by the sharing of two or more electrons.
Chemical compounds are generally grouped into one of two categories as follows;
covalent compounds ionic compoundsCovalent or molecular compounds generally result from two nonmetals reacting with each other. The elements form a compound by sharing electrons, resulting in an electrically neutral molecule.
Examples of covalent compounds are as follows:
watersucroseDNALearn more about covalent compounds at: https://brainly.com/question/11632372
#SPJ1
SOMEONE HELP PLS! I missed a day and I need help rn
Answers
Answer:
D
Explanation:
Cells need a structure to separate their genetic material from the rest of the cell. This structure is the
cell membrane.
vacuole
cytoplasm
nucleus.
Answers
Answer: Nucleus
Explanation: It is the nucleus because the nulceus holds the chromosomes of the cell.
The element cobalt displays many similarities to the element iron and is also attracted to magnets. Based on this information, is it likely that cobalt forms magnetic domains? Explain your answer.
Answers
In ferromagnetic materials, smaller groups of atoms band together into areas called domains, in which all the electrons have the same magnetic orientation. That's why you can magnetize them.
What is the meaning of magnetic domains?A portion of a ferromagnetic material where the magnetic moments are aligned with one another because of interactions between molecules or atoms.
In ferromagnetic materials, the atoms form structures called domains.
A domain is a region inside of a material where groups of magnetic moments naturally align in the same direction.
There can be numerous domains within an object.
Learn more about magnetic domains here:
https://brainly.com/question/22965158
#SPJ2
GUYS HELP PLS QUICK LOTS OF POINTS AND BRAINLIEST!
A 0.250 M solution was prepared from 135 mL of a 7.00 solution. What volume of water (in mL) was required for dilution?
Answers
Answer:
385
Explanation:
0.250m Converted to 250 mL then 250+135+ the answer
I'm not sure?
How many moles are in 5NO3?
Answers
Answer:
200
Explanation:
more molecules thats all i know
Difference between Displacement and Double Displacement reaction
Answers
Answer:
please follow me
Explanation:
A displacement reaction is the one when a more reactive substance displaces a less reactive one from its salt solution whereas a double displacement reaction is the one where a mutual exchange of ions happens between two compounds.
______________________________ is the attraction amongst molecules that are dissimilar.
A.) Transpiration
B.) Cohesion
C.) Adhesion
D.) Polarity
Answers
Answer:
ily
Explanation:
Silicon can be made by heating a mixture of sand (silicon dioxide) with magnesium
powder.
The equation for this reaction is shown below.
SiO2 (s)+ 2Mg (s) → 2MgO (s) + Si (s)
Calculate the mass of silicon dioxide needed to make 1 g of silicon.
Relative atomic masses: O = 16; Si = 28
Mass = ?
Answers
Answer:
[tex] \frac{60}{28} = \frac{15}{7} [/tex]