Answer:
DNA
Explanation:
The eukaryotic cell participates in the formation of complex organisms and contains a nucleus, cytoplasmic organelles, and a cytoskeleton.
In a eukaryotic cell, DNA is contained in a compartment called the nucleus, which is enclosed by a membrane.The answer should be DNA based on the wording of the question. Hopefully this helped a little bit.
when was the element copper discovered? Who discovered the element copper?
The Mesopotamians discovered copper (Cu) in 9000 BC.
What would cause entropy to increase in a reaction?
A. The products becoming more spread out
B. The products forming an ordered pattern
C. The products forming fewer molecules
D. The products forming a more rigid structure
i think A but if I'm wrong sorry
then if increasing then becoming spread out so letter A
Starting with a 7. 0 x 10-5 M. Allura Red stock solution you will need to calculate the volumes required to prepare 10.00 mL solutions of 3.5 x 10-5 M, 2.8 x 10-5 M, 2.1 x 10-5 M, 1.4 x 10-5 M, and 3.5 x 10-6 M before coming to lab. What volume of the stock solution will be required to prepare 10.00 mL of a 2.1 x 10-5 M solution of Allura Red?
Answer:
1) 5.0 mL, 4.0 mL, 3.0 mL and 2.0 mL respectively.
2) 3.0 mL
Explanation:
Hello there!
1) In this case, by considering that the equation we use for dilutions contain the initial and final concentrations and volumes:
[tex]C_1V_1=C_2V_2[/tex]
For the first four solutions, we compute the volume of the stock one (V1) as shown below:
[tex]V_1=\frac{C_2V_2}{C_1}[/tex]
Thus, we obtain:
[tex]V_1^1=\frac{3.5x10^{-5}M*10.00mL}{7.0x10^{-5}M} =5.0mL\\\\V_1^2=\frac{2.8x10^{-5}M*10.00mL}{7.0x10^{-5}M} =4.0mL\\\\V_1^3=\frac{2.1x10^{-5}M*10.00mL}{7.0x10^{-5}M} =3.0mL\\\\V_1^4=\frac{1.4x10^{-5}M*10.00mL}{7.0x10^{-5}M} =2.0mL[/tex]
2) In this case, for a final concentration of 2.1x10-5 M and a volume of 10.00 mL, the volume of the stock solution would be:
[tex]V_1=\frac{2.1x10^{-5}M*10.00mL}{7.0x10^{-5}M} =3.0mL[/tex]
Best regards!
liquids that mix completly are called
Answer:
Miscible
Explanation:
Mixed completely
How does viscosity affect boiling point?
A. Higher viscosity = Lower boiling point
B. Lower viscosity = Higher boiling point
C. Higher viscosity = Higher boiling point
D. Viscosity has no effect on boiling point
If you have 35 moles of sodium hydroxide (NaOH) in a 5000 mL solution, what is the concentration of the NaOH in the solution?
Answer:
7 mol.dm^3
Explanation:
formula for calculating concentration: C = n/v
Start by changing 5000ml solution to dm^3 because volume is in dm^3
1 ml = 1cm^3
then from a cm^3 to dm^3 you divide by 1000
5000ml = 5000cm^3
5000÷1000= 5dm^3
c = n/v
= 35/5
= 7mol.dm^3
How many militias of 5.0 M H2SO4 (aq) stock silly toon are needed to prepare 100. Ml of 0.25 M H2SO4 (aq)
Answer:
5 mL
Explanation:
As this is a problem regarding dilutions, we can solve it using the following formula:
C₁V₁=C₂V₂Where subscript 1 refers to the initial concentration and volume, while 2 refers to the final C and V. Meaning that in this case:
C₁ = 5.0 MV₁ = ?C₂ = 0.25 MV₂ = 100 mLWe input the data:
5.0 M * V₁ = 0.25 M * 100 mLAnd solve for V₁:
V₁ = 5 mLAnswer:
5 mL of 5.0 M H₂SO₄ (aq) are needed to prepare 100 mL of 0.25 M H₂SO₄ (aq).
Explanation:
In chemistry, dilution is the reduction of the concentration of a chemical in a solution.
Then, dilution consists of preparing a less concentrated solution from a more concentrated one, and it consists simply by adding more solvent to the same amount of solute. That is, the amount or mass of the solute is not changed, but the volume of the solvent varies: as more solvent is added, the concentration of the solute decreases, since the volume (and weight) of the solution increases.
A dilution is calculated by the expression:
Ci*Vi = Cf*Vf
where:
Ci: initial concentration Vi: initial volume Cf: final concentration Vf: final volumeIn this case, you know:
Ci=5 MVi= ?Cf= 0.25 MVf= 100 mLReplacing:
5 M*Vi = 0.25 M* 100 mL
Solving:
[tex]Vi= \frac{0.25 M*100 mL}{5 M}[/tex]
Vi= 5 mL
5 mL of 5.0 M H₂SO₄ (aq) are needed to prepare 100 mL of 0.25 M H₂SO₄ (aq).
If the pressure in the gas tank of the dipper was set very high, the ideal Gas law breaks
down.
Why is this happening?
a) Argon reacts with the walls of the steel vessel at high pressure
b) The molecules would clump together in the center and invalidate the law
c) A steady measurement could not be made as the gas would leak out too quickly
d) The volume occupied by the molecules themselves is no longer negligible
Answer: d) The volume occupied by the molecules themselves is no longer negligible. This most be the answer because a, b and c don't make any sense at all.
Explanation:
The volume occupied by the molecules themselves is no longer negligible. Hence, option D is correct.
What is an ideal gas equation?The ideal gas law (PV = nRT) relates the macroscopic properties of ideal gases. An ideal gas is a gas in which the particles (a) do not attract or repel one another and (b) take up no space (have no volume).
The ideal gas law fails at low temperature and high pressure because the volume occupied by the gas is quite small, so the inter-molecular distance between the molecules decreases.
Hence, the volume occupied by the molecules themselves is no longer negligible.
Learn more about the ideal gas here:
https://brainly.com/question/27691721
#SPJ2
What do the horizontal portions of the graph represent? When heat is added to or removed from the substance and the temperature remains the same, where is the thermal energy going? Why?
Burning a candle melts the wax, but also burns the wick. Explain how burning a candle involves both physical and chemical changes.
Answer:
Burning of the candle is both physical and chemical change. Burning of the candle melts the wax and hence physical state of wax has changed from solid to liquid.
Again the wax combines with the atmospheric oxygen and changes to carbon dioxide, heat and light.
Thus both the changes are accompanied by the burning of the candle.
Explanation:
hope this helps!
~mina
here ya goooooooo!!!!!!!!!!!!
Answer:
Thank youuuuu bestie, you really pulling through
Answer:
yessss
Explanation:
(GIVING BRAINLIEST) Which of the following is a good source of carbohydrates?
pears
meat
eggs
fish
Answer:
I would choose pear fruits are a good source of carbohydrates hopefully its right sorry if its not
Answer: Fruit
Fruits have a lot of carbohydrates in them :) Hope this helped!
Please help I'm not sure what the answers are
Answer:
An element's mass number (A) is the sum of the number of protons and the number of neutrons. The small contribution of mass from electrons is disregarded in calculating the mass number.
From which celestial body is a star born?
A. supernova
B. nebula
C. protostar
D. black dwarf
Answer: B. nebula
Explanation:
Answer:
B. nebula
Explanation:
Birth takes place inside hydrogen-based dust clouds called nebulae.
-TheUnknownScientist
What is FALSE about nitrogen gas and carbondioxide?
1- Both are compounds
2- Both are gases
3- Elements in both substances are non-metals
4- Both are made up of atoms
Answer: Both are compounds
Explanation:
[tex]\text{N}_{2}[/tex] is an element, not a compound.
What is the oxidation state of copper in Cu(C2H3O2)2? +2 -1 -2 +4 +1
Answer:
6........................
Balancing chemical equation
_CoBr3 + _CaSO4 -> _CaBr2 + _Co2 (SO4)2
- solution please
Answer:
2 CoBr3 + 3 CaSO4 = 3 CaBr2 + Co2(SO4)2
Explanation:
What is the difference between soil and sand
Explanation:
The terms ‘sand’ and ‘soil’ are often interchanged and used synonymously with one another. Many people consider them the same, but when scrutinized, they are quite different from each other. First and foremost, sand is a type of soil–so is silt, clay, peat, and loam. These types of soils are generated when rocks break up into their constituent parts and are acted upon by outside forces, such as wind, water, and natural salts. The broad definition of soil refers to the loose layer of earth that covers the surface of the planet. Sand, on the other hand, is defined as loose material that consists of rocks or mineral grains.
Answer:
soil is defined as the top layer of the land surface of the earth that is composed of disintegrated rock particles, humus, water, and air.
sand is defined as a loose material that consists of rocks or mineral grains.
Explanation:
Mass = 35g Volume = 7cm3 What is the Density?
Answer:
5 g/cm^3
Explanation:√3V=1.91293cm
how did the idea of what a cell was develop overtime
Answer:
experiments
Explanation:
I am not sure but heres my take
Answer:
It was only after the invention of electron microscope that the idea developed
sort each characteristic according to whether it describes acid, bases, or both.
Answer:
Acids: react with metals, taste sour
Both: can cause burns, conduct electricity
Basis: react with nonmetals, taste bitter
Explanation:
This is the right answer
Answer:
Acids: react with metals, taste sour
Both: can cause burns, conduct electricity
Basis: react with nonmetals, taste bitter
it's right, I did it.
What is the formula mass of the fictitious compound: AB2?
5 The atoms of a certain element each contain 36 protons and 8 valence electrons. Which
statement correctly identifies this element and describes its chemical reactivity? (8.58)
A The element is krypton, Kr, and it is not very reactive.
B The element is chlorine, Cl, and it is highly reactive.
C The element is krypton, Kr, and it is highly reactive.
D The element is chlorine, Cl, and it is not very reactive.
Answer:
dfdfaxc b
Explanation:
Deep & Thought Provoking Questions to Ask Yourself (& Others)
When was the last time you tried something new? ...
Who do you sometimes compare yourself to? ...
What's the most sensible thing you've ever heard someone say? ...
What gets you excited about life? ...
What life lesson did you learn the hard way?
Answer:
Am I supposed to answer these on brainly?
Explanation:
How many mL of a 6.0 M solution of HNO3 would be needed to prepare 300.0 mL of a 0.60 M solution of HNO3?
Answer:
500mL.
Explanation:
How does this equation show that transmutation has taken place? 238 U – 334 Th + He 92 O A. The numbers of neither nucleons nor atoms are conserved. B. One element changes into another. O C. Atoms of different elements are present. O D. The number of nucleons is not conserved.
Answer:
B. One element changes into another.
Explanation:
We can see from the equation that uranium is changed to thorium and helium. Transmutation is the process by which one element is changed to another through radioactive decay, nuclear bombardment, or other similar processes.
Answer:b
Explanation:
How many molecules are contained in 125 grams of oxygen
gas (O2)?
Answer:
i think its 62.50 :) hope this helped you out
Sometimes the number of electrons in an atom changes. These atoms are called what
Answer:
ions
Explanation:
what is the unit for particles of titanium iii oxide
a. Ions
b. Atoms
C: molecules
d. Formula units
Answer:
d
Explanation:
Which of the following is an example of a physical property?*
the mass
ability to rust
flammability
ability to combust
Answer: The mass
Explanation: ability to rust, flammability, and ability to combust are chemical properties.