Answer:
Vaughn Manufacturing
1. The weighted-average accumulated expenditures for 2017 were:
c. $1,200,000.
2. The interest capitalized for 2017 was:
b. $144,000
3. The weighted-average accumulated expenditures for 2018 by the end of the construction period were:
= $2,546,000.
4. The interest capitalized for 2018 was:
= $267,000.
Explanation:
a) Data and Calculations:
Expenditures for the construction were as follows:
Date Amount of No. of months Weighted Average
expenditure Expenditure
2020:
January 2, 2020 $613,000 12/12 $613,000
September 1, 2020 1,802,400 4/12 600,800
December 31, 2020 1,802,400 0/12 0
Total weighted-average expenditure for 2020 = $1,213,800
Which is approximately = $1,200,000
Interest capitalized = $144,000 ($1,200,000 * 12%)
Capitalized expenditure by December 31, 2020 = $1,344,000 ($1,200,000 + $144,000)
Date Amount of No. of months Weighted Average
expenditure Expenditure
2021:
January 1, 2021 1,344,000 9/9 $1,344,000
March 31, 2021 1,802,400 6/9 1,201,600
September 30, 2021 1,203,000 0/9 0
Total weighted-average expenditure for 2020 = $2,545,600
Which is approximately $2,546,000
Interest capitalized for 2018 = $267,330 ($2,546,000 * 10.5%)
Approximately $267,000
what is mean by vocational training?
Answer:
Hope this helps
Explanation:
It means a instrustional program or courses that focus on the skills required for a particular job function or trade.In vocational training educates and prepares students for specific careers, disregarding transitional unrelated academic subjects.
The following labor standards have been established for a particular product: Standard labor hours per unit of output 4.3 hours Standard labor rate $ 17.80 per hour The following data pertain to operations concerning the product for the last month: Actual hours worked 6,300 hours Actual total labor cost $ 112,770 Actual output 1,400 units Required: a. What is the labor rate variance for the month
Answer:
See below
Explanation:
With regards to the above, labor rate variance is computed as;
Direct labor rate variance = (Standard rate - Actual rate) × Actual quantity
Given that;
Standard labor rate per hour = $17.8
Actual hours worked = 6,300
Actual total labor cost = $112,770
Actual rate = $112,770/6,300 = $17.9
Therefore,
Direct labor rate variance = ($17.8 - $17.9) × 6,300
= $630 unfavourable
All unethical practices are covered under the law.
True or False
Answer:
False
Explanation:
Law represent the rules and regulations made by the government in order to fulfill them so that each and every individual could work on ethical way, Here only the ethical practices are covered under the law if anyone is not following the rules and regulations proper action should be taken against that person. Also it is compulsory for all to follow the rules and regulations
Therefore the given statement is false
Identify which are goals of monetary policy, and which are not. Goals of monetary policy Not goals of monetary policy Answer Bank financial market stability increasing the size of the financial sector economic growth high inflation improving banks' profits high employment price stability Which two goals are often called the dual mandate of the Federal Reserve
Answer:
goals of monetary policy
financial market stability
economic growth
high employment
price stability
Not goals of monetary policy
increasing the size of the financial market
high inflation
improving banks' profits
Dual mandate : high employment
price stability
Explanation:
Monetary policy are policies taken by the central bank of a country to increase or reduce aggregate demand.
There are two types of monetary policy :
Expansionary monetary policy : these are polices taken in order to increase money supply. When money supply increases, aggregate demand increases. reducing interest rate and open market purchase are ways of carrying out expansionary monetary policy
Contractionary monetary policy : these are policies taken to reduce money supply. When money supply decreases, aggregate demand falls. Increasing interest rate and open market sales are ways of carrying out contractionary monetary policy
Goals of monetary policy include
financial market stability economic growth high employment price stabilityThe dual mandate of the Federal Reserve was birthed as a result of the stagflation of the 1970s. Stagflation is a period of high unemployment and high inflation levels
The dual mandate are : high employment, stable prices and moderate long-term interest rates.
1. A person risks losing most or all of his or her money in (a) a savings account (b) an elective savings program (c) a speculative investment (d) a conservative investment
he following information pertains to the January operating budget for Casey Corporation. • Budgeted sales for January $207,000 and February $100,000. • Collections for sales are 60% in the month of sale and 40% the next month. • Gross margin is 35% of sales. • Administrative costs are $10,000 each month. • Beginning accounts receivable is $29,000. • Beginning inventory is $16,000. • Beginning accounts payable is $67,000. (All from inventory purchases.) • Purchases are paid in full the following month. • Desired ending inventory is 30% of next month's cost of goods sold (COGS). At the end of January, budgeted accounts receivable from January sales is ________.
Answer:
the budgeted account receivable is $82,800
Explanation:
The computation of the budgeted account receivable is shown below:
= Budgeted sales × next month sales collections percentage
= $207,000 × 40%
= $82,800
hence, the budgeted account receivable is $82,800'
We simply multiplied the budgeted sales with the next month collection sales percentage so that the budgeted account receivable could come
Question text
Raw fish must be cooked to a minimum temperature of:
Select one:
a. 165 °F.
b. 180 °F.
c. 145 °F.
d. 155 °F.
Organizational buyers, when compared to buyers of consumer goods, are........ in number, geographically............. and ............. apt to buy on specifications.
A. Fewer,dispersed,less
B. Fewer, concentrated, less
C.Fewer, concentrated,more
D. Greater, concentrated,less
E. Greater,dispersed,more
Answer:
answer is (D) ok alright
Rooney Company, which sells electric razors, had $350,000 of cost of goods sold during the month of June. The company projects a 5 percent increase in cost of goods sold during July. The inventory balance as of June 30 is $28,000, and the desired ending inventory balance for July is $29,000. Rooney pays cash to settle 75 percent of its purchases on account during the month of purchase and pays the remaining 25 percent in the month following the purchase. The accounts payable balance as of June 30 was $39,000.
Required:
a. Determine the amount of purchases budgeted for July.
b. Determine the amount of cash payments budgeted for inventory purchases in July.
Answer:
A. $368,500
B. $276,375
Explanation:
A. Calculation to determine the amount of purchases budgeted for July
Using this formula
Budgeted purchase = Cost of goods sold + Ending inventory - Beginning inventory
Let plug in the formula
Budgeted purchase=$350*000*1.05 + $29,000 - $28,000
Budgeted purchase=$367,500+$29,000-$28,000
Budgeted purchase=$368,500
Therefore the amount of purchases budgeted for July is $368,500
b. Calculation to Determine the amount of cash payments budgeted for inventory
Cash payment = $368,500*75%
Cash payment= $276,375
Therefore the amount of cash payments budgeted for inventory is $276,375
In Step 4, the EUP from Step 2 and the cost per EUP from Step 3 are used to assign costs to the:___.
a. units in beginning inventory.
b. units completed and transferred to finished goods.
c. units in ending work in process inventory.
d. units sold.
Indirect labor includes:____.
a. labor of employees working directly on the product.
b. labor of the maintenance employees.
c. labor of the clerical staff.
Answer:
b. units completed and transferred to finished goods.
c. units in ending work in process inventory.
b. labor of the maintenance employees.
c. labor of the clerical staff.
Explanation:
EUP stands for the "equivalent units of production". It is the largest number of the units a factory can produce during the period for a given cost if all the efforts were used for one type of unit only.
The assigned cost relates to the unites that is completed as well as transferred to the finished goods. It also refers to the units in the ending work in the process inventory.
Indirect labor cost is the cost that is associated with the cost of the labors which is not directly associated to the production of goods. It includes the cost of the labor for the clerical staff and also for the maintenance employees.
Walter, a single taxpayer, purchased a limited partnership interest in a tax shelter in 1993. He also acquired a rental house in 2019, which he actively manages. During 2019, Walter's share of the partnership's losses was $30,000, and his rental house generated $20,000 in losses. Walter's modified adjusted gross income before passive losses is $130,000.
a. Calculate the amount of Walter's allowable deduction for rental house activities for 2017.
b. Calculate the amount of Walter's allowable deduction for the partnership losses for 2017.
c. What may be done with the unused losses, if anything?
Answer:
a. maximum allowable deduction = $25,000 - [50% x ($130,000 - $100,000)] = $25,000 - (50% x 30,000) = $25,000 - $15,000 = $10,000
b. partnerships passive losses must be deducted from passive gains, since there are no passive gains, there are no deductions = $0
c. passive losses can be carried forward for future deductions against passive gains
Wildhorse Corporation has pretax financial income (or loss) from 2015 through 2021 as follows.
Income (Loss) Tax Rate
2015 $65,280 25%
2016 (95,200) 20%
2017 122,400 20%
2018 40,800 20%
2019 142,800 20%
2020 (81,600) 25%
2021 173,200 25%
Pretax financial income (loss) and taxable income (loss) were the same for all years since Wildhorse has been in business. In recording the benefits of a loss carryforward, assume that it is more likely than not that the related benefits will be realized.
Required:
a. What entries for income taxes should be recorded for 2015? .
b. Indicate what the income tax expense portion of the income statement for 2016 should look like. Assume all income (loss) relates to continuing operations.
c. What entry for income taxes should be recorded in 2017?
d. How should the income tax expense section of the income statement for 2018 appear?
e. What entry for income taxes should be recorded in 2019?
f. How should the income tax expense section of the statement for 2020 appear to be ?
?
Answer:
Wildhorse Corporation
a. Entry for income taxes for 2015:
Debit Income Taxes Expense $16,320
Credit Taxes Payable $16,320
To record income taxes expense for the year.
b. Income Tax Expense Portion of the Income Statement for 2016:
Income before taxes (Loss) ($95,200)
Income taxes expense $0
Net Income (Loss) ($95,200)
c. Entry for income taxes for 2017:
Debit Income Taxes Expense $5,440
Credit Taxes Payable $5,440
To record income taxes expense for the year.
d. Income Tax Expense Portion of the Income Statement for 2018:
Income before taxes (Loss) $40,800
Income taxes expense 8,160
Net Income (Loss) $32,640
e. Entry for income taxes for 2019:
Debit Income Taxes Expense $28,560
Credit Taxes Payable $28,560
To record income taxes expense for the year.
f. Income Tax Expense Portion of the Income Statement for 2020:
Income before taxes (Loss) (81,600)
Income taxes expense $0
Net Income (Loss) (81,600)
Explanation:
a) Data and Calculations:
Pretax financial income (or loss) from 2015 through 2021 as follows.
Year Income (Loss) Tax Rate Taxable Taxes Net Income
Income Expense (Loss)
2015 $65,280 25% $65,280 $16,320 $48,960
2016 (95,200) 20% $0 $0 (95,200)
2017 122,400 20% $27,200 $5,440 $116,960
2018 40,800 20% $40,800 $8,160 $32,640
2019 142,800 20% $142,800 $28,560 $114,240
2020 (81,600) 25% $0 $0 (81,600)
2021 173,200 25% $91,600 $22,900 $150,300
Benjamin Company produces two products from a joint process: X and Z. Joint processing costs for this production cycle are $8,000. Yards Sales price per yard at split-off Disposal cost per yard at split-off Further processing per yard Final sale price per yard X 1,500 $6.00 $3.50 $1.00 $7.50 Z 2,200 9.00 5.00 3.00 11.25 If X and Z are processed further, no disposal costs will be incurred or such costs will be borne by the buyer. Refer to Benjamin Company. Using sales value at split-off, what amount of joint processing cost is allocated to Product X (round to the nearest dollar)
Answer:
Benjamin Company
Using sales value at split-off, the amount of joint processing cost allocated to Product X is:
= $2,500.
Explanation:
a) Data and Calculations:
Joint Products X Y Total
Joint processing cost $8,000
Units 1,500 2,200 3,700
Sales price per yard $6.00 $9.00
Sales value at split-off $9,000 $19,800 $28,800
Disposal cost per yard 3.50 5.00
Further processing per yard 1.00 3.00
Final sales price per yard 7.50 11.25
Product X = $2,500 ($8,000 * $9,000/$28,800)
10) At the beginning of the year, Lucy company estimated that the total annual fixed overhead costs would amount to $25,000. Further, Lucy estimated that its volume of production would be 2,000 units of product. Based on these estimates, Lucy computed a predetermined overhead rate that was used to allocate overhead costs to the products made during the year. As predicted, actual fixed overhead costs did amount to $25,000. However, actual volume of production amounted to 2,200 units of product. Based on this information alone: A. Products were overcosted during the year. B. Products were undercosted during the year. C. Products were costed accurately during the year. D. The answer cannot be determined from the information provided.
Answer: A. Products were overcosted during the year.
Explanation:
At the budgeted figures of $25,000 fixed overhead costs and the 2,000 units of production, the predetermined fixed overhead rate is:
= 25,000 / 2,000
= $12.50 per unit
However, the company then produces 2,200 units at the same cost of $25,000 making the actual predetermined fixed overhead rate:
= 25,000 / 2,200
= $11.36 per unit
The actual rate is less than the predetermined rate which means that the products had originally be overcosted by being apportioned higher expenses.
Hsu Company manufactures two products (A and B) from a joint process that cost $200,000 for the year just ended. Each product may be sold at the split-off point or processed further. Additional processing requires no special facilities, and production costs of further processing are entirely variable and traceable to the products involved. Further information follows. If Processed Further Product Pounds Produced Per-Pound Sales Price Sales Value Separable Cost A 20,000 $ 12 $ 350,000 $ 90,000 B 30,000 8 300,000 60,000 If the joint costs are allocated based on the net-realizable-value method, the amount of joint cost assigned to product A would be:
Answer:
$80,000
Explanation:
Calculation to determine the amount of joint cost assigned to product A would be:
Joint cost assigned to product A =20,000 ÷(20,000 + 30,000)] x $200,000
Joint cost assigned to product A = $80,000
Therefore The the amount of joint cost assigned to product A would be:$80,00
If the market price is P1: Group of answer choices the firm will break even by producing a quantity of Q2. the firm may make a profit if it can increase the demand for its product. the firm will experience a loss and raise its price to P2. The firm will then break even. the firm will experience a loss since price is less than ATC.
Answer:
the firm will experience a loss since price is less than ATC.
Explanation:
In the case of the perfectly competitive firm when the market price is P_1 so the curve i.e. shown in the attachment represent that the firm would have a loss as the price would be lower than the average total cost i.e. ATC
So according to the given situation, the last option is correct
And the rest of the options would be wrong
Meadow is getting ready to attend college next year. She's thinking about ways to pay for it. Which of these is the best first step for her to take in planning her finances? A) apply for the work-study program at the college B) apply for as many scholarships as possible C) apply for a Perkins Loan Eliminate D) apply for a bank loan
Answer:
its b
Explanation:
yw
Since Meadow has to start attending college the first step to be taken by her has been to apply for as many as scholarships. Thus, option B is correct.
To pay the payment of the college there have been ways that aid financially. The programs may help you earn while studying, or being a bright student the financial aid cab be provided.
The options suits for the planning to pay the expenses are:
A. Apply for the Work-study program at the college:
At the Federal Work-study program, the students in colleges are allowed to work part-time to help them financially.
B. Apply for as many as scholarships:
The scholarships have been the financial aid provided by the government, private organizations, and educational institutes for the students to continue their education.
C. Apply for a Perkins Loan Eliminate:
It has been the low-interest rate scheme provided to the students in the financial need to continue their education. It has been a kind of loan service.
D. Apply for a bank loan:
Bank loan has been the assistance provided by the banks at the interest rate for a specific time of education.
Since Meadow has to start attending college the first step to be taken by her has been to apply for as many as scholarships. Thus, option B is correct.
For more information about financial help, refer to the link:
https://brainly.com/question/9588983
After successfully completing your corporate finance class, you feel the next challenge ahead is to serve on the board of directors of Schenkel Enterprises. Unfortunately, you will be the only individual voting for you. a.If the company has 430,000 shares outstanding and the stock currently sells for $45, how much will it cost you to buy a seat if the company uses straight voting
Answer:
$9,675,045
Explanation:
In order to win the election of the board of directors, voting powers should have half a of the voting power and one vote.
Calculating the cost incurred to buy the voting power:
Total cost = [Number of shares / 2 + 1] * Stock price
Total cost = [430,000/2 + 1] * $45
Total cost = 215,001 * $45
Total cost = $9,675,045
So, it will cost one $9,675,045 to buy a seat if the company uses straight voting.
Rational and emotional advertising appeals __________ . Group of answer choices represent two distinctive approaches which should never be combined since they divide the focus of a potential consumer's attention counteract each other when combined can be combined wince consumers' purchase decisions are often made on the basis of both rational and emotional motives can only be used together effectively for low-involvement product purchases are most effective when used in conjunction with other advertising appeals
Answer:
can be combined since consumers' purchase decisions are often made on the basis of both rational and emotional motives.
Explanation:
Marketing can be defined as the process of developing promotional techniques and sales strategies by a firm, so as to enhance the availability of goods and services to meet the needs of the end users or consumers through advertising and market research.
Basically, it comprises of all the activities such as, identifying, anticipating set of medium and processes for creating, promoting, delivering, and exchanging goods and services that has value for customers. It typically involves understanding customer needs, building and maintaining healthy relationships with them in order to scale up your business.
Advertisement refers to the promotional multimedia messages designed and developed to make the products or services of a company known to its customers and potential customers. Also, it is generally considered to be one-sided because it focuses on painting a brand as the best and devoid of any negative issue.
Rational and emotional advertising appeals can be combined since consumers' purchase decisions are often made on the basis of both rational and emotional motives.
Buying motive refers to the considerations, urge, emotions or influences that creates the impulse in consumers (customers) to buy a particular good, so as to satisfy their desire or needs.
This ultimately implies that, behind every purchase made by a consumer, there's a consideration, urge or feeling to satisfy that desire or needs l, this is generally referred to as buying motive.
In Economics, buying motives are classified into five (5) main categories and these include;
I. Acquired and Inherent buying motives.
II. Conscious and Dormant buying motives.
III. Physical, Psychological and Sociological buying motives.
IV. Primary and Selective buying motives.
V. Rational and Emotional buying motives.
A rational buying motive is typically based on the consumer's logical and economical consideration of a product in terms of price, durability, need, quality, etc. Thus, it involves a careful consideration of a product rather than feelings as in emotional buying motive.
Bovine Corporation has two divisions: televisions and mobile phones. The mobile phone division has a contribution margin of $600,000. The company's common fixed costs and total traceable fixed costs are $100,000 and $500,000 respectively. Assuming the traceable fixed costs of the television division are $300,000, what is the segment margin of the mobile phone division
Answer:
Segment margin= $300,000
Explanation:
Giving the following formula:
Mobile phone:
Contribution margin= $600,000
Traceable fixed cost= $100,000
Common fixed costs= $500,000
First, we need to calculate the traceable fixed cost to mobile phone:
Traceable fixed cost= 500,000 - 300,000= $200,000
Now, the segment margin of mobile phone:
Segment margin= 600,000 - 100,000 - 200,000
Segment margin= $300,000
Standard Direct Materials Cost per Unit Crazy Delicious Inc. produces chocolate bars. The primary materials used in producing chocolate bars are cocoa, sugar, and milk. The standard costs for a batch of chocolate (8,100 bars) are as follows: Ingredient Quantity Price Cocoa 480 lbs. $0.40 per lb. Sugar 150 lbs. $0.60 per lb. Milk 120 gal. $1.70 per gal. Determine the standard direct materials cost per bar of chocolate. If required, round to the nearest cent. $fill in the blank 1 per bar
Answer: $0.06
Explanation:
The standard direct materials cost per bar of chocolate will be:
Cocoa:
Quantity = 480 lbs.
Price = $0.40 per lb
Amount = $192
Sugar:
Quantity = 150 lbs.
Price = $0.60 per lb
Amount = $90
Milk:
Quantity = 120 gal
Price = $1.70 per gal
Amount = $204
Total amount = $192 + $90 + $204 = $486
Since there are 8100 bars of chocolate, the cost per bar will be:
= $486 / 8100
= $0.06
Question 4 of 10
Tina was falsely accused of shoplifting in a large retail store. She was
humiliated in front of a large crowd that included a number of her friends and
family members. The store's security officer had deliberately planted
evidence to incriminate Tina and was loudly drawing much attention to the
scene. In the end Tina was cleared of the shoplifting charge and no physical
harm was done to her or her property. However, a court case was still decided
in favor of awarding her damages. On what basis might this be?
A. Compensation can be awarded for general damages, such as
traumatic humiliation, as well as special damages.
B. There is no need for actual harm to be suffered in order for
damages to be awarded.
C. A breach of duty of care toward customers in public stores is
always sufficient to award damages.
O D. The security officer was acting as a "reasonable person," which led
the court to award damages.
Answer: a I think
Explanation:
Answer:
A. Compensation can be awarded for general damages, such as
traumatic humiliation, as well as special damages.Explanation:I just took the test
Quad Enterprises is considering a new three-year expansion project that requires an initial fixed asset investment of $2.46 million. The fixed asset falls into the three-year MACRS class. The project is estimated to generate $2,000,000 in annual sales, with costs of $711,000. The project requires an initial investment in net working capital of $220,000, and the fixed asset will have a market value of $300,000 at the end of the project.
1. If the tax rate is 35 percent, what is the project's Year 0 net cash flow?
2. If the required return is 16%, what is the project's NPV?
Answer:
1) initial outlay = $2,460,000 + $220,000 = $2,680,000
2)
depreciation expense year 1 = $819,918
depreciation expense year 2 = $1,093,470
depreciation expense year 2 = $364,326
book value at end of year 3 = $182,286
net cash flow year 1 = [($2,000,000 - $711,000 - $819,918) x 0.65] + $819,918 = $1,124,821.30
net cash flow year 2 = [($2,000,000 - $711,000 - $1,093,470) x 0.65] + $1,093,470 = $1,220,564.50
net cash flow year 3 = [($2,000,000 - $711,000 - $364,326) x 0.65] + $364,326 = $965,364.10
terminal value (year 3) = [($182,286 - $300,000) x .65] + $220,000 = $143,485.90
NPV = -$92,854.95
The End Co issued preferred stock for proceeds of $19,000 during 2014. The company paid dividends of $3,500 on the preferred stock. The company issued a long-term note payable for $75,000 in exchange for a building during the year and bought $16,000 of new equipment. The company also purchased treasury stock for $5,000. The financing section of the statement of cash flows will report net cash inflows of
Answer:
The financing section of the statement of cash flows will report net cash inflows of $10,500
Explanation:
The financing section of the statement of cash flows shows results of cash resulting from capital invested by owners, debt issued and repayments to capital and debt.
Cash Flow from Financing Activities
Preferred Stock Issued $19,000
Dividends Paid ($3,500)
Treasury Stock Purchased ($5,000)
Net Cash Provided by Financing Activities $10,500
Lexigraphic Printing Company is considering replacing a machine that has been used in its factory for four years. Relevant data associated with the operations of the old machine and the new machine, neither of which has any estimated residual value, are as follows:
Old Machine
Cost of machine, 10-year life $89,000
Annual depreciation (straight-line) 8,900
Annual manufacturing costs, excluding depreciation 23,600
Annual nonmanufacturing operating expenses 6,100
Annual revenue 74,200
Current estimated selling price of machine 29,700
New Machine
Purchase price of machine, six-year life $119,700
Annual depreciation (straight-line) 19,950
Estimated annual manufacturing costs, excluding depreciation 6,900
Annual non-manufacturing operating expenses and revenue are not expected to be affected by purchase of the new machine.
Required:
1. Prepare a differential analysis as of April 30 comparing operations using the present machine (Alternative 1) with operations using the new machine (Alternative 2). The analysis should indicate the total differential income that would result over the six-year period if the new machine is acquired.
2. Choices of what other factors should be considered
A. Was the purchase price of the old machine too high?
B. What effect does the federal income tax have on the decision?
C. What opportunities are available for the use of the $90,000 of funds ($119,700 less $29,700 proceeds from the old machine) that are required to purchase the new machine?
D. Should management have purchased a different model of the old machine?
E. Are there any improvements in the quality of work turned out by the new machine?
Answer:
Lexigraphic Printing Company
1. Differential Analysis as of April 30:
Old Machine New Machine Difference
Annual revenue $74,200 $74,200
Annual depreciation (straight-line) 8,900 19,950
Annual manufacturing
costs, excluding depreciation 23,600 6,900
Annual nonmanufacturing
operating expenses 6,100 6,100
Total expenses $38,600 $32,950
Annual net income $35,600 $41,250 $5,650
Net income for 6 six years $213,600 $247,500 $33,900
2. Other factors that should be considered are:
B. What effect does the federal income tax have on the decision?
C. What opportunities are available for the use of the $90,000 of funds ($119,700 less $29,700 proceeds from the old machine) that are required to purchase the new machine?
E. Are there any improvements in the quality of work turned out by the new machine?
Explanation:
a) Dat and Calculations:
Old Machine
Cost of machine, 10-year life $89,000
Annual depreciation (straight-line) 8,900
Annual manufacturing costs, excluding depreciation 23,600
Annual nonmanufacturing operating expenses 6,100
Annual revenue 74,200
Current estimated selling price of machine 29,700
New Machine
Purchase price of machine, six-year life $119,700
Annual depreciation (straight-line) 19,950
Estimated annual manufacturing costs, excluding depreciation 6,900
Annual nonmanufacturing operating expenses 6,100
Annual revenue 74,200
Differential Analysis as of April 30:
Old Machine New Machine Difference
Annual revenue $74,200 $74,200
Annual depreciation (straight-line) 8,900 19,950
Annual manufacturing
costs, excluding depreciation 23,600 6,900
Annual nonmanufacturing
operating expenses 6,100 6,100
Total expenses $38,600 $32,950
Annual net income $35,600 $41,250 $5,650
Net income for 6 six years $213,600 $247,500 $33,900
Which of the following reflect the balances of prepayment accounts prior to adjustment?
Balance sheet accounts are understated and income statement accounts are understated
Balance sheet accounts are overstated and income statement accounts are overstated
Balance sheet accounts are understated and income accounts are overstated
Balance sheet accounts are overstated and income statement accounts are understated
Answer:
The answer is Balance sheet accounts are overstated and income statement account are understated.
Explanation:
You are considering two different methods for constructing a new warehouse site. The first method would use prefabricated building segments, would have an initial cost of $6.5 million, would have annual maintenance costs of $150,000, and would last for 25 years. The second alternative would employ a new carbon-fibre panel technology, would have an initial cost of $8.2 million, would have maintenance costs of $650,000 every ten years, and is expected to last 40 years. Both buildings would be in CCA Class 1 (at a rate of 4 percent) and it is expected that each would have a salvage value equivalent to 25 percent of its construction cost at the end of its useful life. The discount rate the firm uses in evaluating projects is 11 percent. The tax rate is 35 percent. What is the annual cost for each option? (Enter the answers in dollars. Do not round your intermediate calculations. Round the final answers to 2 decimal places. Negative answers should be indicated by a minus sign.)
Answer:
The first method would use prefabricated building segments, would have an initial cost of $6.5 million.
Explain the purposes for which of control accounts are
prepared in a business organization
The purpose of the control account is to keep the general ledger nice and clean without any details, yet contain the correct balances to be used in the financial statements.
Marcia, a single individual, has qualified trade or business income after all applicable deductions of $240,000. Her business paid $80,000 of W-2 wages this year and has $50,000 of tangible business property. Required: Compute Marcia's QBI deduction, assuming her overall taxable income before QBI is $300,000. Compute Marcia's QBI deduction, assuming her overall taxable income before QBI is $180,000.
Answer:
Compute Marcia's QBI deduction, assuming her overall taxable income before QBI is $300,000.
$40,000Compute Marcia's QBI deduction, assuming her overall taxable income before QBI is $180,000.
$36,000Explanation:
Marcia's QBI deduction limits:
lower between 20% of QBI or taxable income
$240,000 x 20% = $48,000
$300,000 x 20% = $60,000
or
higher between 50% of wages or 25% of wages + 2.5% of business property
$80,000 x 50% = $40,000
($80,000 x 25%) + (2.5% x $50,000) = $21,250
Marcia's QBI deduction limits:
lower between 20% of QBI or taxable income
$180,000 x 20% = $36,000
$300,000 x 20% = $60,000
or
higher between 50% of wages or 25% of wages + 2.5% of business property
$80,000 x 50% = $40,000
($80,000 x 25%) + (2.5% x $50,000) = $21,250
Oriole Company uses a periodic inventory system. Details for the inventory account for the month of January 2017 are as follows: Units Per unit price Total Balance, 1/1/2017 340 $6.0 $2040 Purchase, 1/15/2017 170 ..6 1003 Purchase, 1/28/2017 170 ..6 1054 An end of the month (1/31/2017) inventory showed that 270 units were on hand. How many units did the company sell during January 2017?
Answer:
The number of units sold by the company during January 2017 is 410.
Explanation:
Note: The data in the question are merged together. They are therefore sorted before answering the question as follows:
Units Per unit price Total
Balance, 1/1/2017 340 $6.0 $2040
Purchase, 1/15/2017 170 ..6 1003
Purchase, 1/28/2017 170 ..6 1054
The explanation of the answer is now given as follows:
Total units available for sales during January 2017 = 340 + 170 +170 = 680
Units on hand at end of the month (1/31/2017) = 270
Number of units sold by the company during January 2017 = Total units available for sales during January 2017 - Units on hand at end of the month (1/31/2017) = 680 - 270 = 410
Therefore, the number of units sold by the company during January 2017 is 410.