One intresting note is that bleach has a lower measured pH than given based on its color. Why is that? (Hint: what is bleach used for)

Answer:

a. 82.68 g b. 9.8 min

Explanation:

a. The amount of gold deposited by 5 A current in 2 hrs 15 mins

Since charge Q = It where I = current = 5 A and time = 2 hrs 15 mins = 2 × 60 min + 15 min = 120 + 15 min = 135 min = 135 × 60 s = 8100 s

Q = 5 A × 8100 s

= 40500 C

Also, Q = nF where n = number of moles of gold deposited and F = Faraday's constant = 96500 C

n = Q/F = 40500 C/96500 C = 0.4195 moles ≅ 0.42 mole

Now n = m/M where m = mass of gold and M = molar mass of gold = 197

m = nM

= 0.42 × 197 g

= 82.68 g

b. The time taken for 6g of gold to be deposited.

We first find the number of moles of gold in 6g of gold

Since n = m/M and m = 6 g

n = 6/197 = 0.0305 mole

Q = It = nF

t = nF/I

= 0.0305 mol × 96500 C/5 A

= 2939.09 mol C

= 587.82 s

Changing t to minutes

587.82/60 s = 9.8 min

Answer:

time for sulphur dioxide to diffuse is 221.05 secs

The time for sulphur dioxide to diffuse is 108 sec.

Sulfur dioxide has a molecular weight of sixty-four and as a result, the square root is 8. since its inversely proportional, on the way to diffuse two times as fast, the rectangular root of the molecular weight should be 4, and subsequently the molecular weight might be 16. So the solution is methane (CH4).

The charge of diffusion for a gas is inversely proportional to the rectangular root of its molecular mass (Graham's law). The gasoline with the lowest molecular weight will effuse the fastest. The lightest, and consequently fastest, fuel is helium.

Learn more about Sulfur dioxide here: https://brainly.com/question/15654465

#SPJ2

Answer:

Prokaryotic cells contain DNA, contain ribosomes, and lack a nucleus.

Answer:

Contains DNA

Contains Ribosomes

lacks a nucleus

Explanation: I took the quiz on edge

Answer:

B

Explanation:

Please take a look at the picture attached for the drawings and structures.

C2H4 is a alkene (C-C double bond). When steam (water) is added, it turns into an alcohol, where the double bond breaks and a (-OH) functional group is attached to one of the Carbons. In this case, C2H4 ethene is turned into ethanol.

When an alcohol undergoes oxidation, primary alcohols turn into aldehyde (-CHO) or carboxylic acids (-COOH). Secondary alcohol turns into ketone. Ethanol is a primary alcohol. And since it later reacts with propanol, it can only form carboxylic acid when it oxidizes. The product in this reaction is ethanoic acid.

Carboxylic acid reacts with alcohol to form an ester (-COO-). the -COOH group from acid combines with the -OH group from alcohol to form an ester bond -COO- while eliminating H2O. Therefore, when propanol undergoes esterification with ethanoic acid, propyl ethanoate is produced. It is the answer of B.

Answer:

Answers are in the explanation

Explanation:

Precision and accuracy are both statistical concepts. Precision is about how close are the measured values to each other. Accuracy is closeness of the measured values to a specific value or reference value.

There are many ways to calculate precision and accuracy, one is stimating precision as Relative Uncertainty and accuracy as Relative Error.

Formulas are:

Relative Uncertainty: Standard desviation /  Measured value.

Relative Error: Measured Value - Expected Value / Expected value

Measured value is the aveage of the values.

For student 1:

Mean = 25

Standard desviation = 1.5275

Relative Uncertainty: 1.5275 /  25

Relative Uncertainty: 0.061

Relative Error: 25 - 20 / 20

Relative Error: 0.25

For student 2:

Mean = 24.5

Standard desviation = 0.5477

Relative Uncertainty: 0.5477 / 24.5

Relative Uncertainty: 0.02

Relative Error: 24.5 - 20 / 20

Relative Error: 0.225

As the student 2 has a low Relative error and uncertainty, you can say student 2 is more accurate and precise

Answer:

x = 25.02 or 25°c

Explanation:

Given:

mass of water : 7.50×10² =750 gm

Ccal = 8.20× 10² = 820 J/°c

Let assume final temp = x°c

then, heat gained by the water + heat gained by calorimeter

= 25400 J

⇒ Mw × Cw× ΔTw+ Ccal ×ΔT = 25400

⇒ 750× 4.184 × (x - 18.6) + 820 ×(x-18.6) = 25400

⇒ x = 25.02 or 25°c

Answer:

A, a solution made by dissolving 60g of sodium hydroxide in 2000cm³

Explanation:

Concentration = no. of moles / volume (in dm³)

1 dm³ = 1000cm³

no. of moles = mass / molar mass

molar mass of NaOH = 23.0+16.0+1.0 = 40 g/mol

Let's find the concentration of each of the solutions:

A:

= 60/40 /2

= 0.75 mol/dm³

B:

= 40/40 /1

= 1 mol/dm³

C:

= 10/40 / 0.25

=1 mol/dm³

D:

= 20/40 / 0.5

= 1 mol/dm³

Since 0.75mol/dm³ is the lowest concentration out of 4, it is the most dilute.

Tetraamminedichloridoiron(3) nitrate

answer:

a)1.274 g b) 0.013 mole

Explanation:

a) Mass of 1 mol of CuSo4. 5H20=

[tex]63 + 32 + (16 \times 4) + (7 \times 1) + (16 \times 5)[/tex]

=246g

no. moles of CuSo4. 5H2O=

[tex] \frac{mass}{mass \: of \: 1mole} [/tex]

so moles

=

[tex] \frac{3.14}{246} [/tex]

0.013 mole

in the equation

1 mole of sulphuric acid reacts to form 1 mole of CuSo4.5H2O

in other words

0.013 mole of sulphuric acid reacts to form 0.013 mole of CuSo4.5H2O

so mass of 1 mole (Mr) H2So4=

[tex](2 \times 1) + 32 + (16 \times 4)[/tex]

98g

mass of sulphuric acid= mole × mass of 1 mole

so mass= 0.013 × 98

1.274 g

b) In the equation

1 mole of sulphuric acid reacts to form 1 mole of copper(ll) oxide

in other words

0.013 mole of sulphuric acid reacts to form 0.013 mole of copper (ll) oxide

so 0.013 mole of copper(ll) oxide is reacted

Hope it helped and pls mark brainliest

Answer:

i metal

ii nonmetal

iii metal

iv nonmetal

Explanation:

If you look up what the element of a heater is, you get a picture of some sort of rod. It's the heating element of the heater, and must be some type of metal to conduct electricity and warm up. Fishing rods are made of either fiberglass, graphite, or carbon fibre. These are nonmetals. In order for a lightning rod to conduct electricity and bring the lightning down to the ground, it has to be metal. You wouldn't want a metal oven mitt, as that would burn your hand.

Answer:

Hope this helps you

Answer:

The first ionization energy is defined as

Energy storage and transport. Chemical energy transport.

Answer:

to clean the water

Explanation:

Answer:

Explanation:

Properties of metals:

1. They have a lustre ( shine )

2. They have a silvery-grey or golden-yellow colour.

3. They conduct heat and electricity.

4. They are ductile ( can be drawn into wires ) .

5.They are malleable ( can be hammered into thin sheets ).

6. They are sonorous ( make a ringing sound when hit ).

Properties of non-metals:

1. They display a variety of colours.

2. They are poor conductors of heat and electricity.

3. They are not lustrous, ductile or malleable.

Hope it helps

plz mark as brainliest!!!!!!

Answer:

A. It is exothermic

Explanation:

Combustion is a chemical reaction in which a substance combines with oxygen present in air to produce carbon (iv) oxide and water as well release  heat and light energy.Combustion is an exothermic process.

An exothermic reaction releases energy in the form of heat to the surroundings. The energy required to break bonds in the reactants is less than the energy required to form new bonds in the products in an exothermic reaction.

From the given options;

A. It is exothermic is determinable since the reaction is a combustion reaction

B. The bond making energy is more than 600 kJ is not certain because the mass of the wood being burnt is not given. Also, wood is not composed of a specific element that would be taking part in the reaction, rather it is composed of various substances.

C. It is endothermic. is wrong because combustion of wood is exothermic.

D. The bond breaking energy is more than 600 kJ is not certain because the mass of the wood being burnt is not given. Also, wood is not composed of a specific element that would be taking part in the reaction, rather is composed of many substances.

Answer:

1:1

Explanation:

There is one mole of zinc (Zn) and one mole of zinc sulfate (ZnSO₄).

The mole ratio is 1:1.

Hope this helps.

Answer:

1:1

Explanation:

Answer:

biomass is renewable

solar is renewable

coal is non-renewable

natural gas is non-renewable

oil is non-renewable

geothermal energy is renewable

Explanation:

The biomass, solar and geothermal are renewable source of energy and coal, natural gas and oil are non renewable source of energy.

Renewable energy is defined as the energy derived from natural source of energy that are replenished at the higher rate then they are consumed.

It can also be defined as the energy that are collected from renewable resources that are replenished on a human time scale.

Solar, wind, tidal, biomass, geothermal etc. are some of the example.

Non renewable energy is defined as the natural resource of energy that cannot be easily replaced by human means at a pace quickly enough to keep up with the consumption.

Coal, petrol, oil, natural gas, fossil fuel etc. are some of the example.

Thus, the  biomass, solar and geothermal are renewable source of energy and coal, natural gas and oil are non renewable source of energy.

To learn more about renewable source, refer to the link below:

https://brainly.com/question/13258110

#SPJ2

Answer:

transports solid materials

Explanation:

Erosion is a process where solid materials are transported by natural forces such as wind or water.

Answer: c

Explanation:

Answer : The net ionic equation will be,

[tex]H^{+}(aq)+OH^{-}(aq)\rightarrow H_2O(l)[/tex]

Explanation :

In the net ionic equations, we are not include the spectator ions in the equations.

Spectator ions : The ions present on reactant and product side which do not participate in a reactions. The same ions present on both the sides.

The given balanced ionic equation will be,

[tex]HCl(aq)+NH_4OH(aq)\rightarrow NH_4Cl(aq)+H_2O(l)[/tex]

The ionic equation in separated aqueous solution will be,

[tex]H^+(aq)+Cl^-(aq)+NH_4^+(aq)+OH^-(aq)\rightarrow H_2O(l)+NH_4^+(aq)+Cl^-(aq)[/tex]

In this equation, [tex]NH_4^+\text{ and }Cl^-[/tex] are the spectator ions.

By removing the spectator ions from the balanced ionic equation, we get the net ionic equation.

The net ionic equation will be,

[tex]H^{+}(aq)+OH^{-}(aq)\rightarrow H_2O(l)[/tex]

Answer:

b

Explanation:

a drug problem consumes the bulk of a persons income because drugs are expensive to buy

A drug problem can quickly consume the bulk of a person income

A drug is any chemical substance that causes a change in an organism's physiology or psychology when consumed. Drug abuse or substance abuse refers to the use of certain chemicals for the purpose of creating pleasurable effects on the brain.

Drug use can have significant and damaging short-term and long-term effects. Taking some drugs can be particularly risky, especially if you take high doses or combine them with other drugs or alcohol.

People of any age, sex or economic status can become addicted to a drug. Certain factors can affect the likelihood and speed of developing an addiction.

The best way to prevent an addiction to a drug is not to take the drug at all. If your doctor prescribes a drug with the potential for addiction, use care when taking the drug and follow the instructions provided by your doctor. Thus you can save your income.

The correct answer is option B.

Learn more about drug problem, refer:

https://brainly.com/question/23284149

#SPJ2

Answer:

B

Explanation:

DuPont created the first acrylic fibers in 1941 and trademarked them under the name Orlon.

Answer:

A

Explanation:

The purpose of the periodic table was to organize elements as they were discovered into periods and groups, according to their properties. It was not just a naming of elements, as a list.

The purpose of the periodic table was to organize elements as they were discovered. Thus option A is correct.

Periodic table is defined as an arrangement of all known elements in order of increasing atomic number and recurrent chemical attributes.

It can also be defined as a tabular arrangement of chemical elements ordered by increasing atomic number and element groups.

It helps us to learn about an ordered grouping of the 118 known chemical elements.

The periodic table contains alkali metal, alkaline earth metal, transition elements, noble gas, post transition element etc. and many more elements are arranged in periodic table in groups.

Thus, the purpose of the periodic table was to organize elements as they were discovered. Thus option A is correct.

To learn more about periodic table, refer to the link below:

https://brainly.com/question/11155928

#SPJ5

Explanation:

Stoichiometry measures these quantitative relationships, and is used to determine the amount of products and reactants that are produced or needed in a given reaction. Describing the quantitative relationships among substances as they participate in chemical reactions is known as reaction stoichiometry.

Answer:

C. If Assertion is true statement but Reason is false.

Explanation:

The burning of magnesium in air produces magnesium oxide as shown by the equation;

2Mg(s) + O2(g) -----> 2MgO(s)

The magnesium oxide solid is recovered as a white ash. This is a typical example of an oxidation reaction which is also a combustion reaction.

The reason has nothing at all to do with the assertion hence the answer given.

Magnesium oxide is basic just like the oxides of other metals and dissolves in water to yield an alkali.

Answer:

Answer:

C. If Assertion is true statement but Reason is false.

Explanation:

The burning of magnesium in air produces magnesium oxide as shown by the equation;

2Mg(s) + O2(g) -----> 2MgO(s)

The magnesium oxide solid is recovered as a white ash. This is a typical example of an oxidation reaction which is also a combustion reaction.

The reason has nothing at all to do with the assertion hence the answer given.

Magnesium oxide is basic just like the oxides of other metals and dissolves in water to yield an alkali.

Explanation:

Answer:

Temperature, mass, and the type of material are factors that affect the thermal energy of an object.

Material with the higher specific heat will have more thermal energy than material with lower specific heat if they both have the same mass and temperature.

The thermal energy within the thing increases if the temperature remains constant but the object's mass rises.

If two materials have the same mass and temperature, the material with the greater specific heat will have more thermal energy than the material with the lower specific heat.

How does thermal energy transfer depend on the kind of material?

The speed at which thermal energy moves from one end of a substance to another determines thermal conductivity. Insulators transport thermal energy slowly while conductors transfer thermal energy quickly.

The thermal energy within the thing increases if the temperature remains constant but the object's mass rises.

Conduction, convection, or radiation are all ways that thermal energy can be moved from one location to another.

To learn more about energy refer to:

https://brainly.com/question/26520543

#SPJ2

Answer:

Option B.

Kb = [CH3NH3+] [OH-] / [CH3NH2]

Explanation:

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

CH3NH2(aq) + H2O(l) <=> CH3NH3+(aq) + OH- (aq)?

The expression for the equilibrium constant, Kb is simply the ratio of the concentration of the products raised to their coefficient to the concentration of the reactants raised to their coefficient.

Thus, the expression for the equilibrium constant, Kb fo th above reaction can be written as follow:

Kb = [CH3NH3+] [OH-] / [CH3NH2]

Option B gives the correct expression for Kb.

Answer:b

Explanation:AP EX

Answer:

[tex]180^\circ[/tex] by the VSEPR theory.

Explanation:

This question is asking for the bond angle of the [tex]\rm C=C=O[/tex] bond in [tex]\rm H_2C=C=O[/tex]. The VSEPR (valence shell electron pair repulsion) theory could help. Start by considering: how many electron domains are there on the carbon atom between these two bond?

Note that "electron domains" refer to covalent bonds and lone pairs collectively.

For example, in [tex]\rm H_2C=C=O[/tex], the carbon atom at the center of that [tex]\rm C=C=O[/tex] bond has two electron domains:

In VSEPR theory, electron domains around an atom repel each other. As a result, they would spread out (in three dimensions) as far away from each other as possible. When there are only two electron domains around an atom, the two electron domains would form a straight line- with one domain on each side of the central atom. (To visualize, consider the three atoms in this [tex]\rm C=C=O[/tex] bond as three spheres on a stick. The central [tex]\rm C[/tex] atom would be between the other [tex]\rm C[/tex] atom and the [tex]\rm O[/tex] atom.)

This linear geometry corresponds to a bond angle of [tex]180^\circ[/tex].

Answer:

The answer to this is A. One kind of atom

Explanation:

The other options make no sense whatsoever. But enjoy.

I hope this helped.

Answer:

A. One kind of atom

Explanation:

Answer:

If you know the number of protons and neutrons you have to simply subtract the number of neutrons by number of protons the answer will be number of neutron

Explanation:

Answer:

We can find the amount of electrons through its Atomic number and with the help of electronic configuration