One way to separate the different kinds of matter in a mixture is through


A. filteration
B. decomposition
C. electrolysis
D. chemical reactions

Answers

Answer 1
The answer is filtration (A).

Creating a mixture is a physical process; as such, the substances that make up a true mixture do not undergo any chemical reactions with one another. It follows, then, that to separate substances that are mixed together, the process to use would be physical, not chemical. Filtration fits that bill: Solutes that do not dissolve in the solvent can be trapped, for example, by a fine mesh whose openings are large enough for the solvent to pass through but too small for the undissolved solute(s) to do so.

Choices B, C, and D are all chemical processes.

Decomposition (B) is the breakdown of a substance into chemically distinct fragments. For example, hydrogen peroxide in a mixture (solution) with water decomposes in the presence of an appropriate catalyst—the products you are left with are water and oxygen gas, which bubbles out of the mixture. But you haven’t separated the hydrogen peroxide from the water—through decomposition, the hydrogen peroxide molecules are broken up and the atoms rearranged to form different molecules. There’s no hydrogen peroxide left to separate anymore. So, decomposition doesn’t separate different substances in a mixture—it transforms them.

Electrolysis (C) is a chemical process that uses an electric current to drive the movement of charged particles (electrons and ions) through a conductive medium. Suffice it to say that this will almost certainly change the chemistry of a mixture. For example, assume you’ve got a mixture of some inert, insoluble solute in water. If you run a very strong electric current through water, you’ll end up decomposing the water molecules themselves into oxygen and hydrogen gases. Again, you haven’t technically separated the solute from the mixture because separation implies that you have the separated substances still around. In this example, you’ve “separated” your solute by chemically transforming your solvent into two different gases; one part of your mixture no longer exists. (Side note: electrolysis of pure water takes quite a bit of energy; on the other hand, tap water, which contains dissolved electrolytes, can be readily decomposed via electrolysis using the current delivered by a standard alkaline battery.)

As a rule of thumb, the suffix (–lysis) usually indicates chemical decomposition, and the stem that precedes the suffix usually indicates what the decomposition process involves. Examples include electrolysis (as we just discussed), hydrolysis (breaking a chemical bond using water), glycolysis (the biochemical process of breaking down glucose into smaller molecules to harness the energy released), and radiolysis (splitting a bond within atoms comprising a molecule using ionizing radiation).

Finally, as should be clear by this point, chemical reactions are not the way to go about separating mixtures. Again, the chemical substances in a mixture retain their chemical identities. Separating the constituents of a mixture essentially entails isolating these substances. Filtration can and does isolate solutes from solvents without altering their chemical identities (assuming the filter itself is chemically inert). A chemical reaction changes a substances chemical identity, and so could not properly be regarded as a method of separation, and only separation.
Answer 2

One way to separate the different kinds of matter in a mixture is through filtration. The correct option is A.

What is filtration?

Filtration is a physical or mechanical process by which two or more substances are of different compositions. These substances can be solid, liquid, or gas.

There are three types of filtration. These are mechanical, chemical, and biological. The different types of filtration are based on a similar principle, which is a mixture of several types poured onto a filter membrane. A specific size of the pore is present in the filter membrane.

The other options are decomposition, which is a process of breaking down substances. Electrolysis is separating charged ions and chemical reactions to form compounds.

Thus, the correct option is A. filtration.

To learn more about filtration, refer to the link:

https://brainly.com/question/14530470

#SPJ6


Related Questions

The modern synthesis combined the concepts of _______ and evolution.

Answers

Answer:

genetics

hope this helps :)

Explanation:

5. The diagram above shows what happened when an irregular solid was immersed in water. This irregular solid has the same mass as a gold block, which is 2 cm wide by 2 cm high by 5 cm long. Using the method described in the passage, compare the density of the unknown with the density of gold.
A. Equal to gold
B. Less than gold
C. Greater than gold
D. Cannot be determined​

Answers

The answer is going to be C hope this helps please make me a Brainly

The density of the unknown will be greater than the density of gold.

An overview will be given since the diagram isn't given. The formula to calculate the density of an irregular shape will be the mass divided by the volume.

The density is the mass per volume. From the information given, since they've the same mass, then it means that the volume of the gold will be more than the volume of the unknown. Therefore, the density of the unknown will be greater than gold.

Read related link on:

https://brainly.com/question/18370124

HELP!! URGENT ASAP!! WILL GIVE BRAINLIEST TO FASTEST ANSWER!!

Answers

Answer:

This shoes the soda lime defusing to limewater turning into germinating seeding which defuses back to limewater

Explanation:

Radon-222 is an alpha emitter with a half life of 3.82 days.

1. What is the mass number of the daughter isotope?
2. What is the element symbol of the daughter isotope?
3. What is the atomic number of the daughter isotope?​

Answers

The daughter isotope (a decay product): Polonium (Po)

Further explanation

Radioactivity is the process of unstable isotopes to stable isotopes by decay, by emitting certain particles,  

alpha α particles ₂He⁴ beta β ₋₁e⁰ particles gamma particles γ positron particles ₁e⁰

Radon-222 emits alpha α particles ₂He⁴  , so the atomic number decreases by 2, mass number decreases by 4

Reaction

[tex]\tt _{86}^{222}Rn\Rightarrow _{84}^{218}+_2^4He[/tex]

1. The mass number of the daughter isotope = 218

2 and 3. If we look at the periodic system, the element with atomic number 84 is Polonium (Po)

Which element is this.Its shiny,Is solid at room temperature, has atoms with two valence electrons?A:Lithium B:Strontium C:Aluminium D:Silicon

Answers

Answer:

Strontium

Explanation:

STRONTIUM

Strontium is a chemical element that is non radioactive and its occur naturally. It is a shiny and silvery white metal that have atomic number of 38 and it belong to group 2 member of the periodic table which is why it have two valence electrons. It is a solid metal at room temperature.

About 99% of Strontium is found in bones. It help to make new bones in humans by replacing the old bones.

Therefore, it is strontium.

Strontium is the element which is shiny, solid at room temperature and has two electrons in its outermost shell.

The atomic number of Strontium is 38. In the first shell, there are two electrons, in the second and fourth shell has space for 8 electrons so these shells are filled with electron whereas third shell has 18 electrons and the fifth shell has 2 electrons. Strontium belongs to second group i.e. alkaline earth metals due to which it has two valance electrons in its outermost shell.

https://brainly.com/question/18374119

explanation of atomic radius​

Answers

Ah yes.

The atomic radius is basically the distance between the nucleus of the atom and the outermost electron in the farthest orbital of the atom. The more bigger the atomic radius , the less powerful is the force that holds together the nucleus and its electrons.

express the answer to each of the following calculations in scientific notation with the correct number of significant figures: 45.0 x 270

Answers

Answer: 1.215 × 10^4  i think

Explanation:

Planets A and B are both the same size, but planet B has three times the mass of planet A. How does the weight of an object compare on the two planets?

Choose the correct answer.


The weight of an object is the same on both planets.

The weight of an object is three times larger on planet A.

The weight of an object is three times larger on planet B.

The weight of an object will depend on more factors than just the weight and size of the planet.

Answers

Answer:

The answer is d

Explanation:

A cube of metal has a mass of 5.05 x 10°g and its density is known to be 12.77 g/mL, what is the volume of this metal?
A 395.5 mL
B. 2.529 mL
C. 63,910 mL
D. 64.48 ml

Answers

Answer:

Explanation:

option A is correct

How many carbon atoms are there in 2.23 grams of propane (C3H8)?​

Answers

Answer:

3.05x10²³ (3 sig. fig.)

Explanation:

Propane (C₃H₈) is a colorless alkane gas with three carbons and eight hydrogen atoms. In 2.23 grams of propane, there are 3.05 x 10²³ carbon atoms present.

What is the number of particles/atoms?

The number of atoms or the particles being the smallest units is estimated by the product of the number of moles and Avogadro's number.

The Avogadro's number (Na) is used to determine the number of particles that have been present in a mole of a substance. A mole of a substance is said to have 6.022 × 10²³ ions, atoms, electrons, molecules, etc.

Moles of propane are calculated as,

Moles = mass ÷ molar mass

= 2.23 ÷ 440.094

= 0.05057

Now, the number of particles is calculated as,

Number = moles × Avogadro's number

= 0.05057 × 6.022 × 10²³

= 3.05 x 10²³

Therefore, 3.05 x 10²³ carbon atoms are present in 2.23 grams of propane.

Learn more about the number of particles/atoms here:

https://brainly.com/question/11884840

#SPJ2

What is Chlorofluorocarbons?

Answers

Answer:

Chlorofluorocarbons and hydrochlorofluorocarbons are fully or partly halogenated paraffin hydrocarbons that contain only carbon, hydrogen, chlorine, and fluorine, produced as volatile derivative of methane, ethane, and propane. They are also commonly known by the DuPont brand name Freon.

Explanation:

Answer:

Explanation: Chlorofluorocarbons and hydrochlorofluorocarbons are fully or partly halogenated paraffin hydrocarbons that contain only carbon, hydrogen, chlorine, and fluorine, produced as volatile derivative of methane, ethane, and propane. They are also commonly known by the DuPont brand name Freon

hope that helps.↑

Synthesis
1 point
Balance the following chemical equation. What are the final coefficients
starting from the left and going to the right? *
AICI:
+
H2O
_Al(OH)3 +
НСІ
1,1,1,1
1, 2, 1, 2
2, 2, 2, 2.
1,3,1,3

Answers

Answer:

nãosecoi m fazoe isrspoo rqe a perugtunat  iomkplnetacá

Explanationveja  qeuastã onvamoetn e depois recoepe-a qui aipis onãestoácpletoma  :

When we mixed milk and vinegar in the lab demonstration, a/an __.
was created.

Answers

Answer:

Plastic

Explanation

Found on google

Which of the following is true about metals?
A. They are usually less reflective in luster than metalloids.
B.
They are usually better conductors than nonmetals.
C. They are usually less malleable than nonmetals.
D.
They are usually more brittle than metalloids.

Answers

B. They are usually better conductors than nonmetals

with of the following describe a chemical change

a) a metal fork was melted

b) a metal fork was cut in half

c) a metal fork became bent

d) a metal fork became rusted​

Answers

Answer:

D

Explanation:

Rusting is a chemical change that occurs due to oxygen.

Answer:

d i had this your welcome

when heat is added to a substance describe how the molecules are affected?

Answers

Answer:

the molecules and atoms start to vibrate faster so basically the object starts to expand because the space between atoms increases :)

If an animal is placed into a sealed container for a short time, the oxygen level will
A. decrease and the carbon dioxide level will increase.
B. decrease and the carbon dioxide level will decrease,
C, increase and the carbon dioxide level will increase.
D. decrease and the carbon dioxide level will stay the same.
E increase and the carbon dioxide level will decrease.

Answers

Answer:

A

Explanation:

Animals take in oxygen and convert it into carbon dioxide therefore the oxygen levels will decrease and the carbon dioxide levels will increase

If an animal is placed into a sealed container for a short time, the oxygen level will:  decrease and the carbon dioxide level will increase.

What happens to oxygen level inside a container:

The oxygen held inside the space is quickly being consumed by the freight or because of rusting inside a space, and that encased spaces must consistently be treated as perilous. And the carbon dioxide levels on the other hand will increase.

It will not take a long time for an animal to survive under these conditions.

Thus. option A is correct.

Find more information about Oxygen here:

brainly.com/question/26073928

after eating an apple and levaing it on top of the table. what will happend to the color of the inner part of the apple? what makes the color of the apple change​

Answers

Answer:

Answer Below

Explanation:

When you leave an apple on a table outside it will turn brown. This happens because when you cut an apple, you are exposing it's insides to the oxygen in the air. This causes the PPO (polyphenol oxidase) enzyme in the apple's flesh to oxidize the polyphenols, turning them into some other brown colored products. Hence, the color change.

Answer:

brown i can't explain because its a matter of the atoms in the apple mixing with the air and apple is made with nitrogen

Identify the heterogeneous mixtures.
Group of answer choices

salad

water

vegetable soup

apple juice

trail mix

brass

Answers

One thing to remember is homo=same/pure and hetero=different

so heterogeneous mixture is would be salad, vegetable soup, trail mix and brass.

this is because salad, vegetable soup, trail mix, and brass have a lot components and they’re not pure.

Hopefully i could help!!

What is the mass, in grams, of 0.450 moles of Sb?

Answers

Answer:

54.9 g

Explanation:

0.450 mol x 122g/mol

Relative and average atomic mass both describe properties of an element related to its different isotopes. Out of these two Relative atomic mas is more accurate. Therefore, 54.9 g is the mass in grams of 0.450 moles of Sb.

What is mass?

Mass defines the quantity of a substance. It is measured in gram or kilogram. Average mass is the mass of atoms of an element that are isotopes. It can be calculated by multiplying mass of a isotope to natural abundance of that isotope.

Average atomic mass = (mass of first isotope× percent abundance of first isotope)+(mass of second isotope× percent abundance of second isotope)

Mass of  Sb= number of moles of  Sb ×Molar mass of  Sb

=0.450 mol x 122g/mol

=54.9 g

Therefore, 54.9 g  is the mass in grams of 0.450 moles of Sb.

To learn more about mass, here:

https://brainly.com/question/28704035

#SPJ6

A substance can change into a new kind of molecule when:

Answers

Answer:

Chemical changes cause a substance to change into an entire substance with a new chemical formula. Chemical changes are also known as chemical reactions. The “ingredients” of a reaction are called reactants, and the results are called products.

Hope it helps

how many elements belong to the Halogen family? list the member element by thier symbol.​

Answers

Answer: six elements

Explanation: fluorine (F), chlorine (Cl), bromine (Br), iodine (I), astatine (As), and tennessine (Ts)

Answer:

there are six elements

The diagram shows a model of an animal cell. Explain how you'd modify the model to show the structures in a plant cell.

Answers

Answer:to show the structures of a plant cell,add a cell wall around the membrane and increase the size of the vaculoe insidethe cell, draw green ovals to represent chloroplasts.

Explanation:

How many electrons are there in the only energy level of helium, a noble gas? * Two Three Six Eight​

Answers

Answer:

Explanation:

Noble gases are the least reactive of all known elements. That's because with eight valence electrons, their outer energy levels are full. The only exception is helium, which has just two electrons.

how many picoliters are in 3.16 mL

Answers

Answer:

3.16×10⁹ pL

Explanation:

Given data:

Volume in mL = 3.16

Volume in picoliters = ?

Solution:

Picoliter and milliliters are units of volume. Milliliter is greater unit than picoliter.

1 mL = 10⁹ pL

Now we will convert the 3.16 mL into pL.

3.16 mL × 10⁹ pL/ 1 mL

3.16×10⁹ pL

The first chemists, philosophers like, Aristotle were from which country?

Answers

Answer:

greece

Explanation:

aristole was particularly from stagria, greece. but most early philosophers are from greece

6. Now, revise your definition for waves to include energy and matter.

A wave is a phenomenon that...

Answers

Answer:

A wave is phenomenon that transfers energy from one point to another through a disturbance without affecting the matter.

Explanation:

A wave is phenomenon that transfers energy from one point to another through a disturbance without affecting the matter.

There are two main types of waves Longitudinal waves travels parallel to their source. For example, sound waves. Through a series of rarefactions and compressions, longitudinal waves are propagated. Transverse waves travel perpendicular to their source.

348 g of water starting at 4.0°Celsius is heated until his temperature is 37°Celsius. Calculate the amount of heat energy needed to cause this rise in temperature

STEP BY STEP EXPLANATION!!

Answers

Answer:

48.049 kJ or 48049 J

Explanation:

Hello again.

So we know the formula [tex]q = mc\Delta t[/tex]. c is the heat capacity but this time, it is not given. However, water has a very well known heat capacity which is 4.184 J/(g°C). This is in fact the number we refer to a calorie which is the amount of energy you burn that can raise the temperature of 1g of water by 1°C. So, plugging in values, you get the above. But double check if I am wrong.

The amount of heat energy needed to cause this rise in temperature is 48.049 kJ or 48049 J.

What is heat energy?

Heat is the energy that moves from one body to another when temperatures are different. Heat passes from the hotter to the colder body when two bodies with different temperatures are brought together.

A given amount of matter's heat capacity is the amount of energy needed to raise its temperature by one degree Celsius.

The heat energy will be calculated by the formula

Q = m•C•ΔT

Where c is the heat capacity.

The m is the mass

T is the time

Mass is 348 grams

Temperature is 37°C

The change in temperature is 4.0°C to 37°C

The heat capacity of water is 4.184

Q = 348 x 4.184 x -33 = 48049.056.

Therefore, the amount of heat energy needed is 48.049 kJ or 48049 J.

Learn more about heat energy, here:

https://brainly.com/question/10162784

#SPJ2

Scientists have changed the model of the atom as they have gathered new evidence. One of the atomic models is shown below. A purple center outlined in black with two concentric black circles around the center, the inner circle having 2 small green balls on it and the outer circle having 8 small green balls on it. What experimental evidence led scientists to change from the previous model to this one? A few of the positive particles aimed at a gold foil seemed to bounce back. The colors of light emitted from heated atoms had very specific energies. Experiments with water vapor showed that elements combine in specific proportions. Cathode rays were bent in the same way whenever a magnet was brought near them.

Answers

Answer:

B: The colors of light emitted from heated atoms had very specific energies.

Explanation:

dont know if its the same question i had on edg but i think its B. Sorry if i didnt understand the question :)

Answer:

b

Explanation:

A student lives in an apartment complex next to a park and train tracks. The student observes that they can hear the train coming sooner and from farther away when they are in front of their apartment and can only barely hear the train when they are in the park despite both being the same distance from the railroad tracks.





The student developed the model above. Using the model, identify two potential wave phenomena that occur and are the reason behind why the student can only hear the train in front of the apartment complex.



A.
The train can be heard more easily in front of the apartment complex because of reflection and interference. As the sound comes from the train, the sound waves reflect off of the complex and interfere with each other increasing the amplitude of the wave to make it easier to hear.

B.
The train can not be heard as easily in the park because of reflection and diffraction. The sound reflects off of the trees in the park and diffract between the trees, this causes the waves to bend too much to be heard.

C.
The train can be heard more easily in front of the apartment complex because of diffraction and refraction. The sound waves diffract between the other buildings aiming them towards the apartment complex and then the sound refracts through the apartment complex which makes it more difficult to hear in the park.

D.
The train can not be heard as easily in the park because of interference and reflection. The other buildings in front of the park cause interference of the sound waves from the train and the trees in the park cause reflection making it too hard to hear the train.

Answers

Answer:

The answer is A

Explanation:

Other Questions
Which of the following are examples of acceleration? A. A car speeds up after getting on a highway. B. A car travels at a constant velocity on a highway. C. A car slows down to exit a highway. D. A car rounds a sharp curve on an off ramp at a constant speed. Looking for Latin to English translation.iubeiubreiussiussus When we mixed milk and vinegar in the lab demonstration, a/an __.was created. 8 to the 4th power times 2 divided by 8 to the eleventh power How can you use linear relationships to compare real-worldsituations? According to a company's website, the top 15% of the candidates who take the entrance test will be called for an interview. You have just been called for an interview. The reported mean and standard deviation of the test scores are 70 and 7, respectively. If test scores are normally distributed, what is the minimum score required for an interview? A girls club held a fundraiser last year and raised $600 for the local soup kitchen. This year they raised $960. What is the percent change in the total amount raised by the girls club?The percent change is 0.38%.The percent change is 0.6%.The percent change is 38%.The percent change is 60%. 9C. The diagram below shows an enzyme-catalyzed reaction. How doenzymes speed up biochemical reactions? *Carbon dioxideWaterEnzymeSubstrates(carbonicbind toanhydroseenzyme-Active siteCarbonicacidEnzyme-substratecomplexProductsare releasedSubstratesare convertedinto productsThey lower the activation energy of the reactionThey increase the number of available reactant particlesThey absorb energy from the productsThey provide energy to the reactants how do you solve 1/2x=6 The perimeter of a rectangle is 70cm. If the length of the rectangle is 5cm more than its breadth, find the dimensions of the rectangle. Plsss help I put 15 points What are the problems with getting electricity in the arctic? A function f(x) is graphed.What is the slope of the function?maWhat is the y-intercept of the function?b.Which equatich represents the graph of the function? To measure a certain ingredient, you bend down to be at eye level with the ingredient in the measuring cup. What type of ingredient are you measuring? 1. How are Korean's history and culture linked to China and Japan ? yall please help me in online school i only have 1 week to do itits online by the way which is why it says computers and technology HURRY!!!! DUE TODAY!!!! What is some figurative language and sensory detail from the story "The Banana Tree"? Which statement correctly describes the expression (-25)(15)? A. Both factors are negative, so the product will be negative.B. One factor is positive and one factor is negative, so the product will be positive.C. One factor is positive and one factor is negative, so the product will be negative.D. Both factors are negative, so the product will be positive. which one of these best defines climateplease help i will mark brainlest answer if correct asap What was considered one of the most important animals due to their value when used along the Trans Saharan Trade routes?A burrosB camelsC horsesD long horn cattle