Answer:
6.28x10⁻³ g
Explanation:
First we convert 0.1102 grams of CoHg(SCN)₄ into moles, using its molar mass:
0.1102 g ÷ 491.9 g/mol = 2.24x10⁻⁴ mol CoHg(SCN)₄There is 1 Co mol per CoHg(SCN)₄ mol, meaning there's also 2.24x10⁻⁴ moles of Co.
We now convert 2.24x10⁻⁴ moles of Co into grams, using its molar mass:
2.24x10⁻⁴ mol Co * 28.01 g/mol = 6.28x10⁻³ gTrue or False
Low temperatures lead to faster dissolution rates compared to high temperatures
Answer:
false
Explanation:
this is because , high temperature speeds up the the random motion of particles which leads to high dissolution
To prepare 250mL of calcium chloride solution with a molar concentration of 1.20mol/L, what mass of calcium chloride would be required?
Answer:
33.30 grams of CaCl2 will be required
Explanation:
Given,
Volume of solution, V= 250 ml
Molarity of solution, M= 1.20 mol/L
Molecular mass of CaCL2, S= 40+(35.5 X 2)= 111
We know,
Required mass, W= SVM/1000
Now,
W = (111 X 250 X 1.20)/1000
= 33300/1000
= 33.30
Therefore, 33.30 grams of Calcium Chloride will be required.
Question 1
3 pts
TI
Which part(s) of the following ground state electron configuration holds the valence
electrons?
At
o
1s22s22p63523p4
ОЗр
03s
O2s
O 35 and 3p
Answer:
3s and 3p
Explanation:
From the question given above, the following data were obtained:
Electronic configuration =>
1s² 2s²2p⁶ 3s²3p⁴
Location of valence electron =?
From the electronic configuration given above, we can see clearly that the atom has three (3) shells.
Valence electron(s) are located at the outer most shell of an atom.
The outer most shell of the atom above is 3s and 3p.
Therefore, 3s and 3p will contain the valence electron(s)
A 2.00 L flask is filled with propane gas (C3H8) at a pressure of 1.10 atm and a temperature of 258 K. What is the mass of propane in the flask?
Answer:
m = 4.58 g.
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to realize this problem is solved via the ideal gas equation:
[tex]PV=nRT[/tex]
As we can calculate the moles of propane given the pressure, temperature and volume as shown below:
[tex]n=\frac{PV}{RT} \\\\n=\frac{1.10atm*2.00L}{0.08206\frac{atm*L}{mol*K}*258K} \\\\n=0.104mol[/tex]
Finally, since the molar mass of propane is 44.1 g/mol, we calculate the mass by following the shown below mole-mass conversion factor:
[tex]m=0.104mol*\frac{44.1g}{1mol}\\\\m= 4.58g[/tex]
Regards!
Hypothetical element A has three stable isotopes. The first isotope has a mass of 35.01 amu and an abundance of 35.00%. The second isotope has a mass of 36.01 amu and an abundance of 15.00%. The third isotope has a mass of 37.02 amu and an abundance of 50.00%. What is the atomic mass of element A
Answer:
36.16 amu
Explanation:
From the question given above, the following data were obtained:
1st Isotope:
Mass of 1st isotope = 35.01 amu
Abundance of 1st isotope = 35%
2nd isotope:
Mass of 2nd isotope = 36.01 amu
Abundance of 2nd isotope = 15%
3rd isotope:
Mass of 3rd isotope = 37.02 amu
Abundance of 3rd isotope = 50%
Atomic mass of element A =?
The atomic mass of element A can be obtained as follow:
Atomic mass = [(mass of 1st × Abundance)/100] + [(mass of 2nd × Abundance)/100] + [(mass of 3rd × Abundance)/100]
= [(35.01 × 35)/100] + [(36.01 × 15)/100] + [(37.02 × 50)/100]
= 12.25 + 5.40 + 18.51
= 36.16 amu
Thus, the atomic mass of element A is 36.16 amu
Give the Shorthand Electron Configuration for the following elements:
Nickel
Group of answer choices
[Kr] 3d8 4s2
[Ne] 3d6 4s2
[Ar] 3d8 4s2
answer of this question is [Ar]3d8 4s2
Answer: [Ar] 3d8 4s2
Explanation: Wikipedia
What are the IUPAC name?
Answer:
IUPAC
Explanation:
International Union of Pure and Applied Chemistry
what is the definition of isomerism
Answer:
Isomerism is the phenomenon in which more than one compounds have the same chemical formula but different chemical structures. Chemical compounds that have identical chemical formulae but differ in properties and the arrangement of atoms in the molecule are called isomers. Therefore, the compounds that exhibit isomerism are known as isomers.
The word “isomer” is derived from the Greek words “isos” and “meros”, which mean “equal parts”. This term was coined by the Swedish chemist Jacob Berzelius in the year 1830.
Explanation:
Using what you know about the structures of the amino acid side chains and the mechanisms presented in this chapter, which of the following amino acid side chain may play the following roles in an enzymatic mechanism: a. participate in proton transfer, b. act as a nucleophile
Answer:
a. participate in proton transfer - His
b. acts as a nucleophile - Ser
Explanation:
Enzymes are regulated because they are proteins. They are categorize based on how they catalyze. Heat weakens and inactivates the enzymes because of non covalent interaction. His amino acid participate in proton transfer because it is able to act as an acid as well as a base while Ser amino acid can act as nucleophile.
The steps of preparing 2M solution of NaOH
Answer:
And 500 mL of 2M NaOH solution contains 80.02g NaOH=40.0 g of NaOH .
Explanation:
So, If we mix 40.0 g of NaOH with enough distilled water to make 500 mL, we will get a 2.00 M NaOH solution.
I hope this answers help you! :>When the pressure and number of particles of a gas are constant, which of the following is also constant
ch3cooh number of bonding pairs and lone pairs.
Answer:
whats the question?
Explanation:
The picture below shows a NASA image of the Oort cloud, a sphere of objects that are thought to surround Earth's solar system at a distance of up to one light-year from the Sun.
If the Oort cloud does exist, which of the following could explain why the objects in it may have formed this spherical shape?
A
They are held in orbits by the Sun's gravitational force.
B
They are held in Earth's solar system by Neptune's magnetic field.
C
They float freely in space because the Sun's gravitational force is too weak to hold them in orbit.
D
They are held in stationary positions around Earth's solar system by other stars in space.
The gravitational pull of the Sun keeps them in their orbits. The gravitational pull of the Sun and surrounding stars combined is most likely what gives the Oort cloud its spherical shape.
What does NASA's Oort Cloud mean?The Oort Cloud is a spherical layer of ice objects that is thought to be located between 2,000 and 100,000 astronomical units (AU) from our Sun, a star.
What makes it the Oort Cloud?The Oort cloud, so named after the Dutch astronomer Jan Oort who first confirmed its existence, is a collection of objects with a combined mass estimated to be 10-100 times that of Earth that are less than 100 km (60 miles) across and maybe trillions in number.
To know more about Oort cloud visit:-
https://brainly.com/question/23368033
#SPJ1
Air movement and weather conditions are influenced by
A The Moon
B. Altitude
C. Thermal Energy
Answer:
The moon
Explanation:
The answer is A; Sorry i put the wrong answer by accident. I was trying to get to another question.
Give the answer below brainliest!!!
A. The moon influences the air movement
What is a metal oxide + acid
Metal oxide + acid —> __+__
Answer:
Metal oxide + acid —> salt + water
Explanation:
1.00 x 10-7 moles to grams
HELP HELP HELP
NH3 + NO + N2 + H2O
5. Given 8.25 x 1025molecules of ammonia, determine the number of grams of
nitrogen produced.
Answer:
4NH3+6NO+5N2+6H20
Explanation:
from E=mc²=hv show that wavelength=h/mv
Explanation:
To show - from E=mc²=hv show that wavelength=h/mv
Proof -
Given that,
E = mc²
E = hν
By equating both the equations, we get
mc² = hν
Because real particles do not travel at the speed of light, De Broglie submitted velocity ( v ) for the speed of light ( c ).
mv² = hν
Through the equation λ , de Broglie substituted v/λ for ν and arrived at the final expression that relates wavelength and particle with speed.
mv² = hv/λ
⇒λ = hv/mv²
⇒λ = h/mv
Hence showed.
Write the Ksp expression for the sparingly soluble compound cobalt(II) sulfide, CoS. If either the numerator or denominator is 1, please enter 1.
Answer:
[tex]Ksp=\frac{[Co^{2+}][S^{2-}]}{1}[/tex]
Explanation:
Hello there!
In this case, according to the given information, it turns out firstly necessary to write the chemical equation for this reaction as shown below:
[tex]CoS(s)\rightleftharpoons Co^{2+}(aq)+S^{2-}(aq)[/tex]
Thus, since solids are not included in equilibrium expressions, we can set this one up as follows:
[tex]Ksp=\frac{[Co^{2+}][S^{2-}]}{1}[/tex]
Regards!
It is well-known that carbon dioxide, CO2, has a much greater density than air. In fact,
CO2 gas can displace air, which is why there are regulations in place that limit the
amount of dry ice allowed in elevators. In other words, do not get trapped in an
elevator, or any enclosed space, with someone who is transporting dry ice. Calculate
the pressure exerted by the CO2 gas, in atm, if the density was measured to be 1.983
g/L on a day where the temperature is 22.165 °C.
Answer: The pressure exerted by the [tex]CO_2[/tex] gas, in atm is 1.092
Explanation:
According to the ideal gas equation:'
[tex]PV=nRT[/tex]
P = Pressure of the gas = ?
V= Volume of the gas
T= Temperature of the gas = [tex]22.165^0C=(273+22.165)K=295.165K[/tex] (0°C = 273 K)
n= moles of gas = [tex]\frac{\text {given mass}}{\text {Molar mass}}[/tex]
R= Value of gas constant = 0.0821 Latm/K mol
[tex]P=\frac{mRT}{MV}[/tex] as [tex]Density=\frac{mass}{Volume}[/tex]
[tex]P=\frac{dRT}{M}[/tex] where d is density
[tex]P=\frac{1.983g/L\times 0.0821Latm/Kmol\times 295.165K}{44g/mol}=1.092atm[/tex]
Thus pressure exerted by the [tex]CO_2[/tex] gas, in atm is 1.092
In the titration, 15 mL of CsOH solution is neutralized by 38.2 mL of 0.250 M HBr solution. What is the molarity of the CsOH solution?
Answer: 0.637M
10.2M
1.36M
0.0982M
Explanation: the answer is 1.36M
The molarity of the CsOH solution is 0.636 M.
What is molarity?Molarity is the concentration of any substance in a place.
The reaction is
HBr + CsOH —> CsBr + H₂O
The formula of molarity
[tex]M = \dfrac{n}{V}[/tex]
[tex]\dfrac{0.25 \times 38.2 }{15} = 0.6366[/tex]
Thus, the molarity of the CsOH solution is 0.636 M.
Learn more about molarity
https://brainly.com/question/2817451
#SPJ2
Write an equation for sodium chloride and sodium oxide
Answer:
Explanation:
The Chemical Equation for each one of these compounds would be the following
Sodium Chloride: NaCl
This compound contains 1 Sodium atom and 1 Chlorine atom
Sodium Oxide: Na₂O
This compound contains 2 Sodium atoms and 1 Oxygen atom.
In the reaction below does water acts as the acid or as the base?
H2S + H20 - HS1- + H30+ *
O a. Neither, water is neutral
O b. Acid
O C. Base
Answer:
C. Base.
Explanation:
Hello there!
In this case, according to the given information, it turns out convenient for us to realize that the concept acid and base we should use here is based off the Bronsted-Lowry one, which says that an acid is a hydrogen donor. In such a way, since water accepts one H ion as it goes to H3O⁺, we infer it is C. Base and the H2S the acid.
Also, we can tell HS⁻ is the conjugate base and H3O⁺ the conjugate acid.
Regards!
Which of the following statements about the pH of 0.010 M HClO4 is correct?
pH=2.00, because [H+]=1.0×10−2M.
A: p H equals 2.00 , because the molar concentration of H with a positive 1 charge equals 1.0 times 10 to the negative 2 power molar .
pH=2.00, because [H+]=2.0×10−2M.
B: p H equals 2.00 , because the molar concentration of H with a positive 1 charge equals 1.0 times 10 to the negative 2 power molar .
pH>2.00, because HClO4 is a strong acid.
C: p H is greater than 2.00 , because H C l O 4 is a strong acid.
pH<2.00, because HClO4 is a weak acid.
Answer:
Option B: p H equals 2.00 , because the molar concentration of H with a positive 1 charge equals 1.0 times 10 to the negative 2 power molar .
pH = 2 because [H⁺] = 1×10¯² M
Explanation:
To know which option is correct, we shall determine the pH of the 0.010 M HClO₄ solution. This can be obtained as follow:
We'll begin by calculating the concentration of the hydrogen ion [H⁺] in the solution. This is illustrated below:
HClO₄ is a strong acid and will dessociates as follow:
HClO₄ (aq) —> H⁺ (aq) + ClO₄¯ (aq)
From the balanced equation above,
1 mole of HClO₄ produced 1 mole H⁺.
Therefore, 0.010 M HClO₄ will also produce 0.010 M H⁺.
Finally we shall determine the pH of the solution. This can be obtained as follow:
Concentration of the hydrogen ion [H⁺] = 0.010 = 1×10¯² M
pH =?
pH = –Log [H⁺]
pH = –Log 1×10¯²
pH = 2
Thus,
The pH = 2
because,
[H⁺] = 1×10¯² M
Thus, option B gives the correct answer to the question.
Based on the definition of pH, pH of 0.010 M solution of HClO4 equals 2.00, because the molar concentration of H with a positive 1 charge equals 1.0 times 10 to the negative 2 power molar.
What is pH?The pH of a solution is the negative logarithm of the hydrogen ion concentration of a solution.
pH of a solution is a measure of the acidity of the solution.
pH = - log[H+]where
[H+] is hydrogen ion concentrationFor the 0.010 M solution of HClO4, [H+} = 0.01 M
pH = -log(0.01)
pH = 2.00
Therefore, pH of 0.010 M solution of HClO4 equals 2.00, because the molar concentration of H with a positive 1 charge equals 1.0 times 10 to the negative 2 power molar.
Learn more about pH at: https://brainly.com/question/172153
How many grams of the bromide salt of the conjugate acid must be combined with how many grams of the weak base, to produce 1.00 L of a buffer that is
Answer:
79.1g of weak base must be combined with 56.0g of conjugate acid
Explanation:
that is 1.00 M in the weak base?
The weak base is C5H5N with a pKa of 5.17 (Ka=6.7×10-6)and a desire pH of 5.63
The equilibrium of the weak base is with the bromide salt of the conjugate acid is:
C5H5N(aq) + H2O(l) + Br- ⇄ C5H5NHBr(aq) + OH-(aq)
Where Kb = Kw / Ka = 1x10⁻¹⁴ / 6.7x10⁻⁶
Kb = 1.49x10⁻⁹ is defined as:
Kb = 1.49x10⁻⁹ = [C5H5NHBr] [OH-] / [C5H5N]
Where [OH-] = 10^-(14- pH) = 10^-(14- 5.63) = 4.255x10⁻⁹M
[C5H5N] = 1.00M
Replacing:
1.49x10⁻⁹ = [C5H5NHBr] [OH-] / [C5H5N]
1.49x10⁻⁹ = [C5H5NHBr] [4.255x10⁻⁹M] / [1.00M]
[C5H5NHBr] = 0.35M
In 1L the moles of C5H5NHBr are 0.35 moles
Mass C5H5NHBr: 160.0118g/mol
0.35 moles * (160.0118g / mol) =
56.0g of C5H5NHBr are necessaries
The mass of C5H5N is -79.1g/mol-:
1.00moles * (79.1g/mol) =
79.1g of C5H5N are necessariesWhat are anti-oxidants? Why are they added to fat and oil containing food?
Answer:
A substance that protects cells from the damage caused by free radicals (unstable molecules made by the process of oxidation during normal metabolism). Free radicals may play a part in cancer, heart disease, stroke, and other diseases of aging.
Please hurry!!! And help!!
*URGENT*
Best answer gets marked Brainliest!
NO LINKS or question will be REPORTED!
Why is elemental zinc considered a pure substance
A) it is a metal
B) it is a mixture of different atoms
C) it must be created in a lab
D) all elements are considered pure substances
Answer:
D
Explanation:
Answer:
D
Explanation:
Because it is true
I
Gggggggggggggsgstststsysgtetwtwtst
Answer:
ummm u ok?
Explanation:
If g of chlorine gas occupies a volume of mL at a particular temperature and pressure, what volume will g of chlorine gas occupy under the same conditions
The complete question is as follows: If 1.04 g of chlorine gas occupies a volume of 872 mL at a particular temperature and pressure, what volume will 2.08 g of chlorine gas occupy under the same conditions ?
Answer: A volume of 1744 L will 2.08 g of chlorine gas occupy under the same conditions.
Explanation:
Given: [tex]Mass_1[/tex] = 1.04 g, [tex]V_{1}[/tex] = 872 mL
[tex]Mass_2[/tex] = 2.08 g, [tex]V_{2}[/tex] = ?
As molar mass of chlorine is 35.5 g/mol.
Number of moles is the mass of a substance divided by its molar mass.
Hence, moles of chlorine present in 1.04 g chlorine gas is calculated as follows.
[tex]Moles = \frac{mass}{molar mass}\\= \frac{1.04 g}{35.5 g/mol}\\= 0.029 mol[/tex]
Also, moles of chlorine present in 2.08 g chlorine gas is calculated as follows.
[tex]Moles = \frac{2.08 g}{35.5 g/mol}\\= 0.058 mol[/tex]
Formula used to calculate the volume occupied by 2.08 g of chlorine gas is as follows.
[tex]\frac{V_{1}}{n_{1}} = \frac{V_{2}}{n_{2}}[/tex]
Substitute the values into above formula as follows.
[tex]\frac{V_{1}}{n_{1}} = \frac{V_{2}}{n_{2}}\\\frac{872 L}{0.029 mol} = \frac{V_{2}}{0.058 mol}\\V_{2} = 1744 L[/tex]
Thus, we can conclude that a volume of 1744 L will 2.08 g of chlorine gas occupy under the same conditions.
How many moles are in 150g of Li2O?
Answer:
moles= w/mm
moles=150/30
moles=5