The experimental probability is 29/100 and the number of workers that walk is 1102
What is Experimental Probability?The experimental probability of an event is based on the number of times the event has occurred during the experiment and the total number of times the experiment was conducted. Each possible outcome is uncertain and the set of all the possible outcomes is called the sample space.
The formula for this is given as;
P(E) = Number of occurrence of an event / Total number of times experiment is carried out.
a. Experimental probability = 29/100
b. To predict the total number of workers that walk, we can go as;
(29/100) * 3800 = 1102
Learn more on experimental probability here;
https://brainly.com/question/8652467
#SPJ1
A plane leaves Chicago and flies 750 miles to New York. If it takes 2.5 hours to
get to New York flying against the wind, but only 2 hours to fly back to Chicago
with the wind, what is the plane’s rate of speed and what is the wind speed?
The wind speed is 37.5 miles per hour.
We are given that;
Number of files= 750
Time=2.5 hours
Now,
Let p be the plane’s rate of speed and w be the wind speed. Then, when the plane flies against the wind, its rate is p - w. When the plane flies with the wind, its rate is p + w.
Using the formula d = rt, we can write two equations for the two trips. For the trip from Chicago to New York, we have 750 = (p - w) * 2.5. For the trip from New York to Chicago, we have 750 = (p + w) * 2.
Simplifying the equations, we get 300 = p - w and 375 = p + w.
Adding the two equations, we get 675 = 2p. Solving for p, we get p = 337.5. This means that the plane’s rate of speed is 337.5 miles per hour.
Substituting p = 337.5 into one of the equations, we get 300 = 337.5 - w. Solving for w, we get w = 37.5.
Therefore, by speed the answer will be 7.5 miles per hour.
Learn more about speed here;
brainly.com/question/7359669
#SPJ1
What is the surface area of the cylinder with
height 7 cm and radius 8 cm? Round your
answer to the nearest thousandth.
the monthly rents for five apartments advertised in a newspaper were $650, $650, $800, $1900, and $820. find the mean, median, and mode of the rents.
The mean monthly rent for these five apartments is $764, the median monthly rent is $800, and the mode monthly rent is $650.
To find the mean of the rents, we add all the rents and divide by the total number of rents:
Mean = (650 + 650 + 800 + 1900 + 820) / 5 = $764
The median is the middle value when the rents are arranged in numerical order. In this case, the rents arranged in numerical order are:
650, 650, 800, 820, 1900
The middle value is the third rent, which is $800.
The mode is the value that appears most frequently in the data set. In this case, the mode is $650 because it appears twice, which is more than any other value.
To learn more about mean, median, and mode click on,
https://brainly.com/question/27835126
#SPJ4
please answer question 4 with a simple explanation on how to solve. question 4: What can we say about these 3 lines?
Answer:
Step-by-step explanation:
they are parallel
You have a population of 1000 individuals that is increasing at a growth rate of 10% per year. What will the population be in 5 years? OA) 1500 B) 2000 C) 1110 OD) 1610 E) 1250
Answer:
[tex]1000( {1.1}^{5}) = 1610.51[/tex]
The correct answer is D.
The quadratic parent function has been transformed. The vertex of the new
function is (-1, 3) and another point on the graph is (-3, -5).
If a new function is written as f(x) = a(x - h)^2 + k, what is the value of a?
A city with a population of 40,000 people has an avg water usage of 180 gallons/person per day. If the return rate is 75%, what is the maximum daily flow rate for wastewater ? A. 5.4 MGD B. 14.6C. 2.2 D. 11
The maximum daily flow rate for wastewater is A. 5.4 MGD.
If the city's population is 40,000 people and the average water usage is 180 gallons/person per day, then the total water usage would be 40,000 x 180 = 7,200,000 gallons per day.
If the return rate is 75%, then the maximum daily flow rate for wastewater would be 7,200,000 x 0.75 = 5,400,000 gallons per day.
Converting gallons to million gallons (MG), the answer would be 5.4 MGD. Therefore, the correct answer is A.
To learn more about Converting gallons click here
brainly.com/question/16191815
#SPJ11
If MB=200cm and μ(MBC) = 40°, what is AB?
Round your answer to the nearest tenth and type it in the blank without "cm".
Answer:
290.4 cm
Step-by-step explanation:
BC = MB cos 40°
= 200 x 0.766
BC = 145.2
MC bisects AB
So,
AC = BC
AB = AC + CB
= AC + BC
= BC + BC
= 2BC
= 2 x 145.2
AB = 290.4 cm
Find the volume show work pls
Answer:
375 cm
Step-by-step explanation:
Rectangle volume formula is length × width × height.
H =5, L=5, W=(5+5) 10
250 is the volume of rectangle.
The other shape is a cube.
Cube Volume Formula:
A=a^3, A=5^3=125
250+125=375
Find the area of the surface obtained by rotating the curve about the x-axis:y=[(x^3)/6]+[1/(2x)] from 1/2 to 1
The area of the surface obtained by rotating the curve y = (x³/6) + (1/2x) from 1/2 to 1 about the x-axis is given by the above expression is 2π (1/6 x √(1+ 9x² - 3x⁴/4)).
Calculate the arc length of the curve
We first need to calculate the arc length of the curve, which can be done using the formula:
L = ∫aᵇ √(1+ (dy/dx)²) dx
where,
dy/dx = (3x² - 1/2x²)/6
Therefore, the arc length of the curve is given by:
L = ∫1/2¹√(1+ (3x² - 1/2x² )/6)dx
Calculate the area of the surface
Once we have the arc length of the curve, we can calculate the area of the surface obtained by rotating the curve about the x-axis. This can be done using the formula:
A = 2π × L
Substituting the arc length of the curve in the formula, we get:
A = 2π × ∫1/2¹√(1+ (3x² - 1/2x²)/6)dx
Evaluate the integral
Finally, we need to evaluate the integral in order to calculate the area of the surface. We can do this using integration by parts, which gives us:
A = 2π × ∫1/2¹√(1+ (3x² - 1/2x²)/6)dx
= 2π (1/6 x √(1+ 9x² - 3x⁴/4) - (1/6) ∫1/2¹ (9x² - 3x⁴/4)/√(1+ 9x² - 3x⁴4) dx)
Therefore, the area of the surface is 2π (1/6 x √(1+ 9x² - 3x⁴/4)).
To learn more about area visit:
https://brainly.com/question/951562
#SPJ4
let p be a prime such that p ≡1 (mod 4). prove that −1fpis a square in fp
For a prime p ≡ 1 (mod 4), the quadratic residue of -1 in the finite field [tex]$\mathbb{F}_p$[/tex] exists, i.e., -1 is a square in[tex]$\mathbb{F}_p$[/tex].
What is the proof?Let p be a prime such that p ≡ 1 (mod 4). We need to prove that -1 is a quadratic residue modulo p, i.e., there exists an integer a such that [tex]$a^2 \equiv -1 \pmod p$.[/tex]
We know that the Legendre symbol $\left(\frac{-1}{p}\right)$ is equal to 1 if p ≡ 1 (mod 4), and -1 if p ≡ 3 (mod 4). Since p ≡ 1 (mod 4), we have [tex]$\left(\frac{-1}{p}\right) = 1$.[/tex]
By Euler's criterion, we have
[tex]$\left(\frac{-1}{p}\right) \equiv (-1)^{\frac{p-1}{2}} \pmod p$.[/tex]
Since [tex]$\left(\frac{-1}{p}\right) = 1$[/tex],
we have [tex]$(-1)^{\frac{p-1}{2}} \equiv 1 \pmod p$.[/tex]
This implies that [tex]$\frac{p-1}{2}$ is even, i.e., $p \equiv 1 \pmod 8$.[/tex]
Now, let's consider the field [tex]$\mathbb{F}_p$,[/tex]
which is a finite field of order p. Since p ≡ 1 (mod 4), we have[tex]$p = 4k+1$[/tex] for some integer k. Let's define a subgroup of order 4 in [tex]$\mathbb{F}_p^{\times}$ as $H = {1,-1,i,-i}$, where $i^2 \equiv -1 \pmod p$.[/tex]
Since H is a subgroup of [tex]$\mathbb{F}_p^{\times}$[/tex] of order 4, any element of [tex]$\mathbb{F}_p^{\times}$[/tex] can be written as a power of i multiplied by a power of -1. That is, for any[tex]$x \in \mathbb{F}_p^{\times}$[/tex], there exist integers m and n such that [tex]$x = i^m(-1)^n$.[/tex]
Since $p \equiv 1 \pmod 8$, we have [tex]$2^{(p-1)/2} \equiv 1 \pmod p$[/tex] by Euler's criterion. This implies that [tex]$i^{p-1} = (i^2)^{(p-1)/2} \equiv 1 \pmod p$[/tex]. Thus, [tex]$i^p \equiv i \pmod p$.[/tex]
Now, consider the element [tex]$(-i)^2 = i^2(-1)^2 = -1$[/tex]. This shows that -1 is a quadratic residue modulo p, i.e., there exists an integer a such that [tex]$a^2 \equiv -1 \pmod p$[/tex]. Therefore, we have proved that −1 is a square in [tex]$\mathbb{F}_p$.[/tex]
Learn more about Euler's criterion
brainly.com/question/28988430
#SPJ11
if fi and f2 are both real-valued and both injective and surjective functions with the same domain, then f1 + f2 is invertible. True False
True. fi and f2 are both real-valued and both injective and surjective functions with the same domain, then f1 + f2 is invertible.
Let g = f1 + f2. To prove that g is invertible, we need to show that g is both injective and surjective.
Injectivity: Suppose that g(x) = g(y). Then, we have f1(x) + f2(x) = f1(y) + f2(y), which implies that f1(x) - f1(y) = f2(y) - f2(x). Since f1 and f2 are injective, it follows that x = y. Thus, g is injective.
Surjectivity: Let z be an arbitrary element in the codomain of g. Since f1 and f2 are surjective, there exist elements x and y in the domain of g such that f1(x) = z - f2(y). Then, we have g(x) = f1(x) + f2(x) = z - f2(y) + f2(x) = z + (f2(x) - f2(y)). Since f2 is surjective, there exists an element w in the domain of g such that f2(w) = f2(x) - f2(y). Then, we have g(w) = z, which implies that g is surjective.
Since g is both injective and surjective, it is invertible.
Learn more about invertible here
https://brainly.com/question/31116922
#SPJ11
8. give a recursive definition of the sequence {an}, n = 1, 2, 3,…if a) an = 4n − 2. b) an = 1 (−1)n. c) an = n(n 1). d) an = n2.
a) Recursive definition: a1 = 2, an = an-1 + 4 for n > 1.
b) Recursive definition: a1 = 1, an = (-1)^(n+1) for n > 1.
c) Recursive definition: a1 = 0, a2 = 2, an = (n - 1) * n + a(n-2) for n > 2.
d) Recursive definition: a1 = 1, an = a(n-1) + (2n - 1) for n > 1.
In mathematics, a sequence is an ordered list of numbers or other elements. A recursive definition of a sequence is one that defines each term of the sequence in terms of one or more previous terms. To find the nth term of the sequence, we need to know the previous terms up to n-1.
a) For the sequence {an} given by an = 4n - 2, the first few terms are 2, 6, 10, 14, 18, ... To define this sequence recursively, we can say that a1 = 2 and for n > 1, an = an-1 + 4.
b) For the sequence {an} given by an = 1^(-1)n, the first few terms are 1, -1, 1, -1, 1, ... To define this sequence recursively, we can say that a1 = 1 and for n > 1, an = -an-1.
c) For the sequence {an} given by an = n(n-1), the first few terms are 0, 2, 6, 12, 20, ... To define this sequence recursively, we can say that a1 = 0 and for n > 1, an = (n-1)an-1.
d) For the sequence {an} given by an = n^2, the first few terms are 1, 4, 9, 16, 25, ... To define this sequence recursively, we can say that a1 = 1 and for n > 1, an = an-1 + 2n - 1.
For more such questions on Recursive definition.
brainly.com/question/17298888
#SPJ11
sergio buys m boxes of seeds and n packets of seeds
each box contains 10 seeds
each packet contains 6 seeds
the total number of seeds that sergio buys is T
write a down a formula for T in terms of m and n
The formula for T will be,
T = 10m + 6n
Given,
m boxes of seeds and n packets of seeds.Each box contains 10 seedsEach packet contains 6 seeds Total number of seeds that Sergio buys is T.Now form the equation from the given data,
Equation,
T = 10m + 6n
T = Total number of seeds.
m = Total number of boxes.
n = Total number of packets.
Hence by framing the equation we can get the desired result.
Know more about Algebra,
https://brainly.com/question/20778317
#SPJ1
Consider the third order polynomial
3x^3 + 13x^2 + 18x - 12
To provide a solution for this problem, we can factor the polynomial or find its roots using the rational root theorem.
One possible factorization of the polynomial is:
3x^3 + 13x^2 + 18x - 12 = (x+1)(3x^2 + 10x - 12)
To obtain this factorization, we can start by trying factors of the constant term -12 that might work as roots of the polynomial.
One such factor is -1, so we can use synthetic division or long division to divide the polynomial by x+1. This gives us a quotient of 3x^2 + 10x - 12, which can be factored using the quadratic formula or other methods.
The roots of the polynomial can be found by setting each factor equal to zero and solving for x. This gives us:
x+1 = 0 or 3x^2 + 10x - 12 = 0
The first equation has a single root of x = -1. The second equation can be solved using the quadratic formula or factoring, giving us two more roots:
x = (-10 ± sqrt(100 + 4312)) / (2*3) = (-10 ± 2sqrt(19)) / 3
Therefore, the roots of the polynomial are -1, (-10 + 2sqrt(19))/3, and (-10 - 2sqrt(19))/3.
To learn more about polynomial click here:
brainly.com/question/16979098
#SPJ11
: Jack's dinner bill was $25. 20. If Stephanie's
dinner bill was of Jack's bill, how much
was Stephanie's bill
Stephanie's bill was $12.60.
To calculate Stephanie's bill, we need to find what fraction of Jack's bill her bill was. Since Stephanie's bill is a fraction of Jack's bill, we can use proportions to solve for the unknown value. Let x be Stephanie's bill, then we can write the equation:
x = (1/2) * 25.20
Simplifying, we get:
x = 12.60
Therefore, Stephanie's bill was $12.60.
Learn more about Bill here: brainly.com/question/20692894
#SPJ11
The volume of this sphere is startfraction 500 pi over 3 endfraction cubic inches. what is its radius?
According to the question we have the radius of the sphere is 5 inches.
To find the radius of a sphere given its volume, we can use the formula:
V = (4/3)πr³
where V is the volume of the sphere and r is its radius. We are given that the volume of the sphere is:
V = 500π/3 cubic inches
Substituting this value into the formula, we get:
500π/3 = (4/3)πr³
Multiplying both sides by 3/4π, we get:
r³ = (500/4)
Simplifying, we get:
r³ = 125
Taking the cube root of both sides, we get:
r = 5
1. Divide both sides by π:
(500/3) = (4/3)r³
2. Multiply both sides by 3 to remove the fraction:
500 = 4r³
3. Divide both sides by 4:
125 = r³
4. Take the cube root of both sides:
r = 5
Therefore, the radius of the sphere is 5 inches.
To know more about Radius visit :
https://brainly.com/question/811328
#SPJ11
only set a money supply target that is consistent with a nominal interest rate target, and vice versa.
The Federal Reserve can only set a money supply target that is consistent with a nominal interest rate target and vice versa. The correct answer is C).
The Federal Reserve has the ability to set targets for both the money supply and the nominal interest rate, but it cannot do so independently. In other words, the two targets are interdependent and setting one requires consideration of the other.
The Federal Reserve can adjust the money supply through open market operations, which involve buying or selling government securities to increase or decrease the money supply respectively. Adjusting the money supply affects interest rates through the supply and demand for loans. If the money supply increases, interest rates will decrease, and vice versa.
Therefore, the Federal Reserve must consider both targets when making policy decisions. Ultimately, the goal of the Federal Reserve is to maintain stable economic growth and price stability, which requires careful consideration of both the money supply and the nominal interest rate. The correct option is C)
To know more about Federal Reserve:
https://brainly.com/question/14700070
#SPJ4
--The given question is incomplete, the complete question is given below "16) The Federal Reserve can: A) only target the nominal interest rate, not the money supply. B) simultaneously set independent money supply and nominal interest rate targets. C) only set a money supply target that is consistent with a nominal interest rate target and vice versa. D) only target the money supply, not the nominal interest rate."--
I need a examples of how to do this
hope this helps a little
What is the slope of the line that contains the points -2- 0-1/1/2 1 2 and (4,-4)?
ill give brainiest to first great answer
Answer:
first option, -1/12
Step-by-step explanation:
slope = rise/run
= (y2-y1)/(x2-x1)
= (-7/2 - -4) / (-2 - 4)
= .5 / -6
=-1/12
Pick the first option
identify the type of sampling technique used to collect data if a sample frame is developed with all possible items from the population. then a sample is drawn such that every item in the frame has the same chance of being selected. a. convenience sample b. simple random sample cluster sample d. systematic sample e. stratified sample
The type of sampling technique used in this scenario is a Simple Random Sample.
Simple Random Sample:A simple random sample is a sampling technique in which every member of the population has an equal chance of being selected for the sample.
This means that each member of the population is assigned a number, and then a random number generator is used to select the members of the sample.
There are several ways to conduct a simple random sample, such as drawing names out of a hat or using a computer program to randomly select participants.
In the given scenario, a sample frame is developed with all possible items from the population, and then a sample is drawn in such a way that every item in the frame has the equal chance of being selected.
This means that each item in the population has an equal chance of being selected for the sample, and the sample is therefore a simple random sample.
Therefore,
The type of sampling technique used in this scenario is a Simple Random Sample.
Learn more about Sampling techniques at
https://brainly.com/question/31479868
#SPJ4
Draw the following segment after a 90 counterclockwise rotation about the origin
the line segment after a 90 counterclockwise rotation about the origin is attached accordingly.
What is rotation in math ?A rotation is a sort of transformation that rotates each point in a figure a specific number of degrees around a particular point.
To do a 90- degree counterclockwise rotation about the origin, we can use the following rotation formula
x ' = x * cos( θ) - y * sin(θ)
y' = x * sin(θ )+ y * cos( θ)
where (x, y) are the original coordinates and (x ', y') are the coordinates after the rotation.
Applying this
For point A (- 5, -3) we have
x' = (-5) * cos(90°) - ( -3) * sin(90 °) = 3
y' = (-5) * sin(90°)+ (-3) * cos(90°) = -5
So the new coordinates after the 90-degree counterclockwise rotation about the origin for point A are (3, -5).
point B (1 , -2)
x' = (1 ) * cos(90°) - (-2) * sin(90°) = 2
y ' = (1 ) * sin ( 90°) + ( - 2) * cos (90 °) = 1
So the new coordinates after the 90-degree counterclockwise rotation about the origin for point B are (2, 1).
The line segment after a 90-degree counterclockwise rotation about the origin would connect point A' (3, -5) to point B' (2, 1).
Learn more about Rotation:
https://brainly.com/question/1571997
#SPJ1
evaluate the integral. 7 1 (ln(x))2 x3 dx
Thus, the integral of [(ln(x))² + x³] .dx is: ∫[(ln(x))² + x³] .dx = x(ln(x))² - x²/2 + (1/4)x⁴ + C
To evaluate the integral of [(ln(x))² + x³] .dx, we need to integrate each term separately.
The integral of (ln(x))² can be found using integration by parts:
Let u = ln(x) and dv = ln(x) dx. Then du = 1/x dx and v = x ln(x) - x.
Using the formula for integration by parts, we have:
∫(ln(x))² dx = u*v - ∫v*du
= ln(x) * [x ln(x) - x] - ∫(x ln(x) - x) * (1/x) dx
= x(ln(x))² - x²/2 + C
where C is the constant of integration.
Next, the integral of x³ is a simple power rule integration:
∫x³ dx = (1/4)x⁴ + C
where C is the constant of integration.
Therefore, the integral of [(ln(x))² + x³] .dx is:
∫[(ln(x))² + x³] .dx = x(ln(x))² - x²/2 + (1/4)x⁴ + C
where C is the constant of integration.
Know more about the integration by parts
https://brainly.com/question/30215870
#SPJ11
The range for a set of data is estimated to be 52. (a) What is the planning value for the population standard deviation? (b) At 95% confidence, how large a sample would provide a margin of error of 47(Round your answer up to the nearest whole number) (c) At 95% confidence, how large a sample would provide a margin of error of 27(Round your answer up to the nearest whole number)
The planning value for the population standard deviation is estimated to be 13. The sample size needed for a margin of error of 47 at 95% confidence is 36, and the sample size needed for a margin of error of 27 at 95% confidence is 91.
The range of a data set is used to estimate the population standard deviation (σ) using the formula σ ≈ range/4. Therefore, in this case, the planning value for the population standard deviation is estimated to be 52/4 = 13.
To find the sample size needed to provide a margin of error of 47 at 95% confidence, we can use the formula n = (z^2 * σ^2)/E^2, where z is the z-score corresponding to the confidence level (1.96 for 95% confidence), σ is the estimated population standard deviation, and E is the margin of error. Substituting the given values, we get n = (1.96^2 * 13^2)/47^2 ≈ 36. Therefore, a sample size of 36 or more would be needed to provide a margin of error of 47 at 95% confidence.
To find the sample size needed to provide a margin of error of 27 at 95% confidence, we can use the same formula as above. Substituting the given values, we get n = (1.96^2 * 13^2)/27^2 ≈ 91. Therefore, a sample size of 91 or more would be needed to provide a margin of error of 27 at 95% confidence.
To learn more about margin of error : brainly.com/question/29419047
#SPJ11
A car wash firm calculates that its daily profit (in dollars) depends on the number n of workers it employs according to the formulaP = −600n + 25n2 − 0.005n4.Calculate the marginal product at an employment level of 50 workers.
To calculate the marginal product at an employment level of 50 workers, you'll need to find the first derivative of the profit function (P) with respect to the number of workers (n) and then evaluate it at n = 50.
1. Start with the profit function: P(n) = -600n + 25n^2 - 0.005n^4
2. Find the first derivative with respect to n: dP(n)/dn
3. Using the power rule for derivatives:
dP(n)/dn = -600 + 50n - 0.02n^3
4. Evaluate the derivative at n = 50:
dP(50)/dn = -600 + 50(50) - 0.02(50)^3
dP(50)/dn = -600 + 2500 - 0.02(125000)
dP(50)/dn = -600 + 2500 - 2500
The marginal product at an employment level of 50 workers is dP(50)/dn = 400 (dollars per worker).
To know more about derivative visit:
https://brainly.com/question/30365299
#SPJ11
for houses with the same square footage, number of bedrooms, number of bathrooms, and number of garages, a 1-year increase in the age of the house results on average in
For houses with the same square footage, number of bedrooms, number of bathrooms, and number of garages, a 1-year increase in the age of the house can result in various effects on average. Some potential effects may include:
1. Decrease in market value: As houses age, their market value may decline due to wear and tear, outdated features, or the perception of lower quality compared to newer homes.
2. Increase in maintenance costs: Older houses may require more frequent repairs and maintenance, leading to higher ongoing expenses for homeowners.
3. Potential decrease in energy efficiency: Older houses might have outdated insulation, windows, or appliances, resulting in higher energy consumption and costs.
4. Changes in neighborhood dynamics: As houses age, the neighborhood may undergo demographic shifts or changes in property values, which can impact the overall desirability and perception of the area.
It's important to note that these effects can vary depending on various factors such as location, housing market conditions, and overall maintenance and renovations of the property.
To learn more about Demographic shifts - brainly.com/question/31857922
#SPJ11
ead the following statements:
I. All isosceles trapezoids consist of two parallel sides.
II. The base angles of all isosceles trapezoids are equal in measure.
III. The lengths of the legs of all isosceles trapezoids are equal in measure.
Which of the above statements are true?
Correct statement are,
I. All isosceles trapezoids consist of two parallel sides.
II. The base angles of all isosceles trapezoids are equal in measure.
We have to given that;
All statements are,
I. All isosceles trapezoids consist of two parallel sides.
II. The base angles of all isosceles trapezoids are equal in measure.
III. The lengths of the legs of all isosceles trapezoids are equal in measure.
Since, We know that;
In a trapezoid, one pair of opposite sides are parallel.
And, The base angles of an isosceles trapezoid are equal in measure (there are in fact two pairs of equal base angles, where one base angle is the supplementary angle of a base angle at the other base).
Since, the two other sides (the legs) are of equal length.
Hence, Correct statement are,
I. All isosceles trapezoids consist of two parallel sides.
II. The base angles of all isosceles trapezoids are equal in measure.
Learn more about the angle visit:;
https://brainly.com/question/25716982
#SPJ1
pls help answer this answer all of them thx
Dot plot 1 would be the most appropriate to display the data collected, while dot plots 2 and 3 would not be correct.
Do the plots represent the data collected?Dot plot 1: This shows positive values ranging from 5 to 20 minutes and represents the opinion of 10 different people, making it appropriate.
Dot plot 2: This includes 10 people but the values provided are too high (80 to 300 minutes) and they do not match the intervals in the number line.
Dot plot 3: This includes 10 people but also negative values, which is impossible as we are representing time.
Learn more about dot plots in https://brainly.com/question/22746300
#SPJ1
Translate triangle A by vector
(1)
to give triangle B.
Then rotate your triangle B 180° around
the origin to give triangle C.
Describe fully the single transformation
that maps triangle A onto triangle C.
The vertices of the triangle C after translating and rotating triangle A are (2, 0), (2, 3) and (0, 3).
From the given graph, the vertices of the triangle are (1, -1), (1, -4) and (3, -4).
Translate triangle A by vector (-3, 1) to give triangle B.
Then rotate your triangle B 180 around the origin to give triangle C.
Translation by (-3, 1):
Triangle B will be the image of triangle A after translating it by vector (-3, 1). This means that each vertex of triangle A will be shifted using the same vector(-3, 1).
Therefore, the vertices of triangle B will be:
Vertex 1: (1 - 3, -1 + 1) = (-2, 0)
Vertex 2: (1 - 3, -4 + 1) = (-2, -3)
Vertex 3: (3 - 3, -4 + 1) = (0, -3)
Rotation by 180°:
Triangle C will be the image of triangle B after rotating it 180° around the origin. This means that each vertex of triangle B will be traverse through an angle of 180°, clockwise direction, with the origin as the centre of rotation.
Therefore, the vertices of triangle C will be:
Vertex 1: (-2, 0) → (2, 0)
Vertex 2: (-2, -3) → (2, 3)
Vertex 3: (0, -3) → (0, 3)
Hence, the vertices of the triangle C after translating and rotating triangle A are (2, 0), (2, 3) and (0, 3).
To learn more about the translation visit:
https://brainly.com/question/17485121.
#SPJ1
if the probability of a super event increases, does the unique event risk increase or decrease in importance. why
The relative importance of unique events may decrease as the probability of a super event increases, it is important to consider all potential risks and their unique characteristics in a comprehensive approach to risk management.
The relationship between the probability of a super event and the importance of a unique event is complex and depends on several factors. Generally speaking, as the probability of a super event increases, the importance of a unique event may decrease in relative importance.
This is because the focus shifts from rare events to more probable ones. As the probability of a super event increases, there may be a greater need to allocate resources toward preventing or mitigating the effects of such events. This can mean that resources that were previously allocated to mitigating the risks of unique events may be redirected towards addressing the more significant risk posed by the super event.
However, it is important to note that the importance of unique events should not be overlooked or underestimated. These events may still pose significant risks and may require specific measures to prevent or mitigate their effects. Additionally, unique events may have consequences that cannot be addressed by measures intended to address super events.
To learn more about probability
https://brainly.com/question/32004014
#SPJ4