The molecule ammonium lauryl sulfate is a detergent because of its hydrophobic tail and a hydrophilic head which are responsible for its cleansing action.
Properties of ammonium lauryl sulfateThough not shown, I presume that the property labelled as C must have to do with the cleasing action of the molecule ammonium lauryl sulfate.
The substance has a hydrophobic tail and a hydrophilic head which enables it to form miscles and these are the responsible for the cleansing action of the ammonium lauryl sulfate molecule.
Learn more about ammonium lauryl sulfate: https://brainly.com/question/16483020
A meteorite is found to contain two isotopes of element X, X-12, and X-14. Experimental analysis determined 95% of the element is isotope X-12, whereas 5% of the element is isotope X-14. What is the average atomic mass of element X?
Select one:
12.0 amu
14.0 amu
12.1 amu
13.0 amu
Considering the definition of atomic mass, isotopes and atomic mass of an element, the atomic mass of the element is 12.1 amu.
Definition of atomic massFirst of all, the atomic mass (A) is obtained by adding the number of protons and neutrons in a given nucleus of a chemical element.
Definition of isotopeThe same chemical element can be made up of different atoms, that is, their atomic numbers are the same, but the number of neutrons is different. These atoms are called isotopes of the element.
Definition of atomic massOn the other hand, the atomic mass of an element is the weighted average mass of its natural isotopes.
In other words, the atomic masses of chemical elements are usually calculated as the weighted average of the masses of the different isotopes of each element, taking into account the relative abundance of each of them.
Atomic mass of the element in this caseIn this case, the first isotope has an atomic mass of 12 amu and a percent natural abundance of 95 %. The second isotope has an atomic mass of 14 amu and a percent natural abundance of 5 %.
Then, the average mass can be calculated as:
12 amu×0.95 + 14 amu×0.05= 12.1 amu
Finally, the atomic mass of the element is 12.1 amu.
Learn more about average atomic mass:
brainly.com/question/4923781?referrer=searchResults
brainly.com/question/1826476?referrer=searchResults
brainly.com/question/15230683?referrer=searchResults
brainly.com/question/7955048?referrer=searchResults
1. In sheep, a gene with two alleles decides wool color. The allele for white wool is
dominant to the allele for black wool. If two heterozygous sheep mate, what
percentage of the sheep will have white wool? Record your answer as a
percent.
White wool
Black wool
HINT: Create a Punnett square on scratch paper to determine the answer.
This is defined as a variant form of a gene. We were told that allele for white wool is dominant to the allele for black wool and two heterozygous sheep mated.
When we cross Ww and Ww we get WW, Ww, Ww, ww. Since white is dominant then the percentage is 3/4 = 75 percent.
Read more about Allele here https://brainly.com/question/3452155
with a given number of moles of solvent,the solution will always have the same concentration. T or F please explain why.
Answer:
Its False
Explanation:
Its False because the concentartion would have to be the solute the thing being added. BUT if you add the equal amount of solvent and add more solute than the one you added more solute is the more concentarted.
AN EXAMPLE:
An example we have Cup A and Cup B we add the same amount of water to both cups but i add more solute to cup A (Examples of solute Salt,powder) and i add less solute to b I balance them in a balance. and cup A is the most concentrated because It has more solute.
ANOTHER EXAMPLE:
Lets do the same thing i add the same amount of water to cup A and B I want to add the same solute but i cant since Cup A saturates At 8 Spoons And B at 6 So cup A is most concentared
Conclusion:
So it all depends on the solute how much you add or at how many spoons you saturate.
Thats all I hope it helped!!
The concentration of the solution depends upon the number of moles of solute with changing, the concentration will change. Therefore, the given statement is false.
What is the molar concentration?The concentration of the given solution can be determined in the terms of molarity, Normality, and molality. We can easily calculate the molar concentration of a substance in a solution.
In chemistry, concentration can be described as the abundance of a constituent divided by the total volume of a mixture. The concentration can be mass concentration, number concentration, molar concentration, and volume concentration.
The concentration of the solution determined as the number of moles of a solute per unit volume of a solution is known as molarity or molar concentration.
The Molar concentration of a solution is evaluated in the following way.
Molarity (M) of the solution = Moles of solute/Volume of the Solution
Learn more about molar concentration, here:
brainly.com/question/21841645
#SPJ2
which word help the reader understand the meaning of stratum in paragraoh 3.
Answer:
It should be D
Explanation:
Stratum is a layer of rock in the ground
what is the advantege of relase energy in a chemica reaction
Answer:
A chemical reaction can release chemical energy stored in batteries, natural gas, and even coal. The main advantage of chemical energy is that it is abundant in nature. Chemical energy can be produced by many organic materials.
Hope this helps!!!!!!
Mark Brainleast!!!!!!!!!!!!
At a temperature of 273K, a 400 mL gas sample has a pressure of 760 mm Hg. If the pressure is changed to 380 mmHg, at which temperature will this gas have a volume of 551mL?
Answer: The correct answer is 188.03K.
Explanation:
As a result, the gas sample will have a volume of 551mL at a temperature of 188.03K.
Suppose that sequence of bases on one segment of DNA is ATCGGA. What is the sequence of the bases on the complementary segment?
is it
A: ATCGGA
B: CGATTC
C: AGGCTA
D: TAGCCT
And why is it one of those that you picked.
Answer:
A: ATCGGA
Explanation:
First, think about which base pairs arise in complementary strands of DNA..
In a constant-pressure calorimeter, the temperature of 60.0 g of water increases by 4.50 °C.
What amount of heat is transferred to the water? (Specific heat capacity of water = 4.2 J/gºC)
O A. 7.88 KJ
द
OB. 1.13 KJ
O C. 1.13 J
o D. 7.88 J
The amount of heat transferred to the water if the temperature of 60.0 g of water increases by 4.50 °C is 1.134Kj.
How to calculate heat?The quantity of heat transferred to a substance can be calculated using the following formula:
Q = mc∆T
Where;
Q = quantity of heat (J)m = mass of substancec = specific heat capacity∆T = change in temperatureAccording to the information in this question;
Q = ?m = 60gc = 4.2J/g°C∆T = 4.5°CQ = 60 × 4.2 × 4.5
Q = 1134J
Therefore, the amount of heat transferred to the water if the temperature of 60.0 g of water increases by 4.50 °C is 1.134KJ.
Learn more about heat at: https://brainly.com/question/1429452
a solution with a pH of 4.6 is a:
_____AI(NO3)3 + _____NaOH —> ___Al(OH)3
+ _____NaNO3
Answer:
Al(NO3)3 + 3NaOH -----> Al(OH)3 + 3NaNO3
If you are given a 0. 32 g piece of sodium metal to react with water, how many moles of hcl would it take to neutralize the sodium hydroxide produced?.
Answer:
.0139
Explanation:
The number of moles of HCl would take to neutralize the sodium hydroxide produced is equal to 0.0139 moles.
What is a neutralization reaction?A neutralization reaction can be defined as a chemical reaction in which an acid and base react with each other to prepare salt and water.
When HCl reacts with NaOH and the resulting salt is sodium chloride and water.
HCl + NaOH [tex]\longrightarrow[/tex] NaCl + H₂O
The chemical reaction, chemical reaction of sodium metal and water gives hydrogen gas and sodium hydroxide:
[tex]2Na+ 2H_2O \longrightarrow 2NaOH + H_2[/tex]
Given the amount of sodium metal = 0.32 g
The moles of sodium metal = 0.32/23 = 0.0139 moles
If the 2 moles of sodium produce sodium hydroxide = 2 mol
The 0.0139 moles of sodium will produce NaOH = 0.0139
Therefore, 0.0139 moles of HCl is required to neutralize 0.0139 moles of NaOH.
Learn more about neutralization reaction, here:
brainly.com/question/20038776
#SPJ2
04. a migrating bird can travel at a speed of 10m/s. how far it will travel in 20min at this speed?
Give your answer in meters (m) and in kilometers (km).
Answer:
12000m & 12km
Explanation:
covert 20mins into seconds.
20 x 60= 1200seconds
distance = speed x time
distance = 10 x 1200
distance = 12000m
1km=1000m
12000/1000= 12km
hope that helps :)
7.744 liters of nitrogen are contained in a container. convert this amount to grams
Answer:
9.69g
Explanation:
Xmol of n2= 7.774/22.4= 0.346 mole
molar mass of n2 2×14 =28g/Mol
Mas of n2= 0.346×28
Mas of n2=9.69grams
Which of the following ionic compounds has a transition metal in it?
a. KOH
b. Cs2S
c. CuSO4
d. MgCl2
Considering that copper occupies Group 11, the ionic compound with a transition metal in it is c. CuSO₄.
What is a transition metal?A transition metal is any of the set of metallic elements occupying a central block (Groups 3–12) in the periodic table. The differential electron occupies a d subshell.
Which of the following ionic compounds has a transition metal in it?
a. KOH. No, K occupies Group 1.b. Cs₂S. No, Cs occupies Group 1.c. CuSO₄. Yes, Cu occupies Group 11.d. MgCl₂. No, Mg occupies Group 2.The ionic compound with a transition metal in it is c. CuSO₄.
Learn more about transition metals here: https://brainly.com/question/2426896
Predict the sign of delta H for a combustion reaction and suggest whether it is likely to be spontaneous or not.
A) + and spontaneous
B) + and uncertain
C) - and spontaneous
D) - and uncertain
What's a combustion
It means hydrocarbon burns in presence of excess oxygen to produce carbon dioxide and heat
Hence it's exothermic∆H=+veAs solid state is converted to gaseous so randomness increases hence it's spontaneous
Combustion is the process of combining with oxygen to form water and carbon dioxide. It is an exothermic reaction and will release energy. Thus delta H for combustion is negative.
What is enthalpy change ?Enthalpy change of reaction is the change in heat absorbed or released by a reaction. If heat is absorbed by the system , the reaction is called endothermic and the change in enthalpy delta H is positive.
For a reaction which release energy, the change in enthalpy delta H will be negative and thus the reaction is said to be exothermic. Combustion is an exothermic reaction.
During combustion new bonds are formed between carbon and oxygen and carbon and hydrogen. Thus bond making is happend more than bond breaking. Bond breaking needs much energy than bond making.
Hence, the released energy is more form combustion and enthalpy change is negative. The process needs no more energy thus the reaction is spontaneous. Thus option C is correct.
To find more about enthalpy change, refer the link below:
https://brainly.com/question/4526346
#SPJ2
Methane (CH4), is said to be the cleanest burning fossil fuel. When burned, it releases carbon dioxide gas and forms water. Using the equation below, determine which of the following is true (assuming there is an infinite supply of oxygen gas (O2)). Select all that apply.
For every 1 molecule of methane CH4 that reacts, 2 molecules of H2O are produced.
For every 2 moles of methane (CH4) that reacts, 2 moles of H2O are produced.
For every 2,000 molecules of methane (CH4) that reacts, 2,000 molecules of H2O are produced.
For every 20 grams of methane (CH4) that reacts, 40 grams of H2O are produced.
For every 200 moles of methane (CH4) that reacts, 400 moles of H2O are produced.
From the stoichiometry of the balanced reaction equation, the correct statement are;
For every 1 molecule of methane CH4 that reacts, 2 molecules of H2O are produced.For every 20 grams of methane (CH4) that reacts, 40 grams of H2O are produced.For every 200 moles of methane (CH4) that reacts, 400 moles of H2O are produced.What is combustion?The term combustion refers to the burning of fossil fuels for the purpose of energy production. The equation for reaction is CH4 + 2O2 ---> CO2 + 2H2O.
Using this equation as shown, the true statements are;
For every 1 molecule of methane CH4 that reacts, 2 molecules of H2O are produced.For every 20 grams of methane (CH4) that reacts, 40 grams of H2O are produced.For every 200 moles of methane (CH4) that reacts, 400 moles of H2O are produced.Learn more about combustion: https://brainly.com/question/15117038
If Thomson’s atomic theory was accurate, what would the results of Rutherford’s gold foil experiment have been?
Answer:
If Thomson's atomic theory was accurate, the positively charged particles would have gone through the foil.
Calculate the concentration of solution containing :
a. 0.2 mole of sodium hydroxide, NaOH, dissolved in water and made up to 100 cm3.
b. 9.8 grams od sulfuric acid, HF, dissolved in water and made up to 500 cm3.
Answer:
the answer for a is 2mol/dm3
Explanation:
n=0.2mol of NaOH
v=100cm3
[tex]v = \frac{100}{1000} \\ v = 0.1 {dm}^{3} \\ concentration = \frac{n}{v} \\ = \frac{0.2}{0.1} \\ = 2mol {dm}^{3} [/tex]
Many human epithelial cells produce sticky mucus. Which of the following statements best describes how this mucus functions in nonspecific adaptive immunity?
provides an impenetrable outer covering that cannot be penetrated by most pathogens
assists in the physical removal of pathogens from the body
produces antibodies that will cause pathogen lysis
promotes growth of the body's normal microbiota
Answer:
The answer is provides an impenetrable outer covering that cannot be penetrated by most pathogens :)
Explanation:
The cells line the skin so then it makes it really difficult for germs to get through. :)
Have an amazing day!!
What is the name of this hydrocarbon? a skeletal model has 2 central carbons bonded to c h 3 at each end, and at the left of the 2 central carbons. 3-isopentane 2-methylbutane 3-methylbutane 1,2-methylpropane
The name of the given hydrocarbon in which 2 central carbon atoms with additional 3 methyl groups is 2-methylbutane.
What are hydrocarbons?Hydrocarbons are the organic compounds which are made up of by the combination of hydrogen and carbon atoms.
According to the question desired structure is attached below where:
2 and 3 number shows the central carbon atoms which are present in the hydrocarbon.1 and 4 number shows the methyl groups that are attached at each end.One extra methyl group is attach on the left side of 2nd central carbon atoms.Hence required hydrocarbon is 2-methyl butane.
To know more about hydrocarbons, visit the below link:
https://brainly.com/question/3551546
Answer:
B. 2-methylbutane
Explanation:
Correct on Edge 2022!!!
Good luck everyone, you got this! Have a great day!
if 18.40 L of chlorine gas at STP reacts with aluminum metal, how many grams of aluminum chloride are produced?
equation: 3Cl2+2Al-->2AlCl3
At STP 1mol of gas weighs 22.4L
Moles of chlorine
18.40/22.40.8molNow
3mols of chlorine produces 2 mol AlCl_31 mol of chlorine produces 0.6mol AlCl_2Moles of AlCl_3
0.8(0.6)0.5molMass of AlCl_3
0.5(133)6.5gA subatomic particle that has almost no mass and a negative charge
Answer:
I think its the electron if this is correct can u mark me brainliest?
HELP PLS DUE TODAY
Biotechnology Activity
Now that you are more familiar with the benefits, risks, and impacts of biotechnology, it is time for you to take a stand! Your task is to choose one of the following types of biotechnology: genetic engineering, cloning, or artificial selection.
You will then write a one- to two-paragraph summary describing your chosen type of biotechnology. You will then need to argue for either the benefits or the risks of your chosen type. Your arguments should present your position, and then give the evidence that led you to this position. Be sure to include the following in your argument:
a description of your chosen type of biotechnology (genetic engineering, cloning, or artificial section)
one benefit or one risk for the individual (based on whether you are for or against it)
one benefit or one risk for society (based on whether you are for or against it)
one benefit or one risk for the environment (based on whether you are for or against it)
A picture (you may hand draw, take photos in nature, or use stock images)
Answer: Ok
Explanation: Explanation:Using recombinant DNA technology to modify an organism's DNA to achieve desirable traits is called genetic engineering. Addition of foreign DNA in the form of recombinant DNA vectors that are generated by molecular cloning is the most common method of genetic engineering.
Vascular plants have an internal transport system to move water and nutrients throughout the plant. Which of these is used to transport water from the roots to the leaves?
how do you find the oxidation numbers for H3PO4
where is the atomic number written
Answer:
The atomic number is written on top of the element symbol.
Explanation:
From top to bottom:
-Atomic Number
-Element Symbol
-Name
-Atomic Mass
~
According to the first law of thermodynamics, what quantity is conserved?.
Answer:
energy
Explanation:
The First Law of Thermodynamics (Conservation) states that energy is conserved, it cannot be created nor destroyed.
Balancing equations
I'll give brainliest.
Answer:
You should follow these steps:
Count each type of atom in reactants and products.
Place coefficients, as needed, in front of the symbols or formulas to increase the number of atoms or molecules of the substances.
Repeat steps 1 and 2 until the equation is balanced.
Explanation:
giving brainliest please help!
Answer:
the reaction will shift right towards products
Explanation:
Based on the Law of Conservation of Mass, what's the minimum amount of Magnesium that will react with 32g of Oxygen to produce 80.6g of Magnesium Oxide?
mass before reaction = mass after reaction
Mg + O = MgO
Mg + 32 = 80.6
Mg = 80.6 - 32 = 48.6 (a)