An electric motor is used to hoist building supplies from the ground to the roof of a building. How high can it lift a 131 kg bundle of shingles in that time?
The electric motor will lift the 131 kg bundle of shingles at a height of 14 m.
What is gravitational potential energy?Gravitational potential energy is the energy exhibited by an object because of a change in its position in the presence gravitational field.
The gravitational potential energy of an object at height h from the surface of the earth is given by:
[tex]U = mgh,[/tex] where m is the mass of the object.
Given, the power of the electric motor, P = 1.5 KW, and time, t - 12 s
Power = Work/ time
Work = Power × time
Work = 1500 ×12 = 18000 J
Given, the mass of the object, m= 131 Kg
The gravitational potential energy, U = 18000J
The height of the bundle of shingles can be determined as:
18000 = 131 ×9.8 ×H
H = 14 m
Learn more about gravitational potential energy, here:
brainly.com/question/19768887
#SPJ1
Your question was incomplete most probably complete question was,
An electric motor is used to hoist building supplies from the ground to the roof of a building. How much work can the motor do in 12 seconds if its power output is 1.5 kW. How high can it lift a 131 kg bundle of shingles in that time?
4. A car is driving at 25 m/s (55 mph). The driver spots a deer jumping into the road. It takes
the driver 2 seconds to react and hit the brakes. Once the brakes are hit the car slows down at a
rate of 5 m/s/s. Calculate how long it takes to stop and how far the car travels during the
reaction time and stopping time.
1. The time taken for the car to stop is 5 s
2. The distance travelled during the reaction time is 50 m
3. The distance travelled during the stopping time is 62.5 m
1. How do I determine the time taken for the car to stop?
The time taken for the car to stop can be obtained as follow:
Initial velocity (u) =25 m/sDeceleration (a) = -5 m/s/s Final velocity (v) = 0 m/sTime taken to stop (t) =?a = (v - u) / t
-5 = (0 - 25) / t
-5 = -25 / t
Cross multiply
-5 × t = -25
Divide both sides by -5
t = -25 / -5
t = 5 s
Thus, the time taken to stop is 5 s
2. How do I determine the distance travelled during the reaction time?
The distance travelled during the reaction time can be obtained as follow:
Velocity = 25 m/sReaction time (t) = 2 secondsDistance travelled =?Distance travelled = velocity × reaction time
Distance travelled = 25 × 2
Distance travelled = 50 m
3. How do I determine the distance travelled during the stopping time?
Initial velocity (u) = 25 m/sDeceleration (a) = -5 m/s/s Final velocity (v) = 0 m/sStopping time (t) = 5 sDistance (s) =?s = ut + ½at²
s = (25 × 5) + (½ × -5 × 5²)
s = 125 - 62.5
s = 62.5 m
Learn more about time and distance travelled:
https://brainly.com/question/13257215
https://brainly.com/question/18265275
#SPJ1
Move over Jeff Bezos, this invention is about to make you the richest person in the world. You have just invented the OyOy (that's YoYo spelled backwards). It is the very latest in home safety and so easy to use!
If your building is on fire, simply reach out and grab the cord on the OyOy and you will be lowered safely toward the ground at a low velocity. The OyOy has a total mass M = 95.0 kg and is shaped like a cylinder of radius R = 0.940 meters. The secret to the operation of the OyOy is its patented shaft whose radius is only r = 0.0900 meters. The cord is wound around the small shaft and this is the secret to your low velocity.
We will use the approximation that the shaft is of negligible mass compared to the total. This means that you can treat the entire OyOy as though it is a solid cylinder with mass M and radius R. Imagine that a customer of mass m = 78.5 kg is using the OyOy and begins his decent from an initial height of y0 = 12.55 meters.
Find velocity of customer at ground.
Answer: The correct answer is 144.716
Explanation: This is the correct answer because the velocity of the customer at ground is higher than it should be
What role does fiction play in sport of your choice? Collect one picture of that sport in action where friction either supporting it or opposing it
A student wants to investigate how the speed of a wave on a stretched string
depends on the tension in the string.
The student uses the apparatus in the figure above.
Describe a method the student could use for this investigation.
The wavelength will double but the speed won't change if the oscillator's period doubles and the oscillator's amplitude can quadruple while maintaining the same wave speed and wavelength based on changes in energy.
What is an oscillator?A mechanical or electronic device known as an oscillator operates on the oscillation principle, which describes a periodic fluctuation between two objects the wavelength will double but the speed won't change if the oscillator's period doubles.
The oscillator's amplitude can quadruple while maintaining the same wave speed and wavelength based on changes in energy. An operating frequency of an oscillator is typically determined by a quartz crystal. Such crystals vibrate when a direct current is supplied at a frequency that is determined by their thickness and how they were extracted from the original mineral rock. Some oscillators combine inductors, resistors, and/or capacitors to determine the frequency. However, oscillators that use quartz crystals produce the highest levels of stability (frequency consistency).
The clock, a particular oscillator found in computers, acts as the microprocessor's pacemaker. The clock frequency (or clock speed), which is typically expressed in megahertz (MHz), plays a significant role in determining how quickly a computer can execute change.
To know more about oscillators, visit:
https://brainly.com/question/29273618
#SPJ1
A horizontal line on a velocity/time graph shows ____ acceleration.
Question 9 options:
positive
negative
changing
zero
The toy car in Figure 20 runs off the edge of a table that is 1.225m high. The car lands 0.4000m from the base of the table. Show all work.
How long did it take the car to fall?
The time taken for the toy car to fall from the given height is 0.5 second.
What is the time of motion of the toy car?
The time of motion of the toy car is calculated by applying the following equation as shown below.
h = vt + ¹/₂gt²
where;
h is the vertical height of fall of the toy carv is the initial vertical velocity of the toy cart is the time of motion of the toy carg is acceleration due to gravity = 9.8 m/s²The initial vertical velocity of the toy car = 0
h = 0 + ¹/₂gt²
h = ¹/₂gt²
2h = gt²
t² = 2h/g
t = √(2h/g)
t = √(2 x 1.225 / 9.8)
t = 0.5 second
Learn more about time of motion here: https://brainly.com/question/2364404
#SPJ1
Calculate the answer to the correct
number of significant digits.
-3.22
x5.1
You may use a calculator. But remember, not every digit the
calculator gives you is a significant digit!
Enter
The number of significant digits is 6.
What is significant figures?The crucial or important digits that accurately represent the meaning of a certain number are known as the significant figures of that number. 6.658, for instance, has four significant digits. These huge amounts give the numbers accuracy. Additionally, they are known as significant digits.
Given that: -3.22 x 5.1.
The product of -3.22 and 5.1 is 16.442.
In the number 16.442, there have 6 significant figures. Hence, The number of significant digits is 6.
Learn more about significant figures here:
https://brainly.com/question/29153641
#SPJ1
The light given off from a candle is which method of heat transfer?
A. Conduction
B. Convection
C. Radiation
As soon as a candle is lit, the air just above the flame begins to warm up. As a result, the air becomes hotter and rises. This is caused by the convectional process of heat transfer, and the hot air stream is referred to as a convection current.
The air is heated by the candle, and the heat rises to the hand. The hand eventually pulls away from the candle because it becomes too hot.The heated air that rises toward the ceiling in your home is an excellent illustration of a convection current. Convection currents are prevalent in the air. The process takes place because warmer air is thought to be less dense than colder air. Wind is another excellent illustration of convection circulation.When a candle burns, the oxygen in the air and the hydrogen and carbon from the wax mix to form carbon dioxide and water vapor. These two gases make up the majority of the material in the candle.To know more about convection
https://brainly.com/question/10219972
#SPJ1
In class, one sophisticated and expensive demonstration the class would see is where I lifted one end of the table until my book started to slide, then kept the angle fixed. Suppose the coefficient of kinetic friction was μk = 0.490, and the 1.35 kg book started sliding from rest at an angle of 39.7o. What would the speed of the book at the bottom of the 1.27 m long table?
5.03 m/s
2.85 m/s
2.55 m/s
1.28 m/s
In class, one sophisticated and expensive demonstration the class would see in where I lift the table, so the speed of the book at the bottom of the table is 2.55 m/s. Hence, option C is correct.
What is Kinetic friction?A force that acts across sliding surfaces is referred to it as kinetic friction. A force acting in opposition to the direction of a moving body on the surface is felt. The two materials' kinetic friction will determine how much force is applied.
According to the given data in the question,
mgh - (μmg cosθ)s = 1/2 mv²
v²/2 = (9.8)(1.27)(sin 39.7) - (0.49)(9.8)(1.27)(cos 39.7)
v = 2.55 m/s.
Therefore, the speed of the book will be equal to 2.55 m/s.
To know more about kinetic friction :
https://brainly.com/question/13754413
#SPJ1
With what velocity should a student of mass 60.0 kg run so that his kinetic energy becomes 270 J?
Answer:
The student's velocity should be 3m/s.
Explanation:
You can find more information about this question here at brainly:
https://brainly.in/question/5531355
May I have Brainliest please? My next rank will be the highest one: A GENIUS! Please help me on this journey to become top of the ranks! I would really appreciate it, and it would make my day! Thank you so much, and have a wonderful rest of your day!
If the friction force between layers in fluid is dependent on gradient of velocity, area of layer and viscosity coefficient of fluid by using the theory of the dimensions estimate the relation.
The characteristics of the surfaces in contact determine the coefficient of static frictional force. It doesn't depend on how big the surfaces are. Depending on the fluid gradient in velocity between fluid layers.
What viscosity means?It speaks of the friction force of a fluid in motion. A fluid with high viscosity resists motion due of high internal stress created by its molecular structure. In cold conditions, low-viscosity oils help the motor begin more quickly by reducing friction between engine components. Elevated oils, on the other hand, retain the strength and thickness of the film.
How come viscosity is measured?Measurements of viscosity are utilized in the grocery business to increase productivity and cost effectiveness. It has an effect on how quickly a substance moves through a pipe, what it takes to set or dry, and also how quickly the fluid is dispensed into packaging.
To know more about Viscosity visit:
https://brainly.com/question/2193315
#SPJ13
this diagram shows an amusement park roller coaster ride.(a) on what part of the ride is the car moving slowest?(b)on what part of the ride is the car moving fastest?(c)The car become stuck at point p which is 50 meters above the ground.To the relief of the presenters the car eventually move again and passes point R at 20m/s.Approximately how height is point R?The car and its passengers have a combined mass of 700kg.
Answer:
KE + PE = constant conservation of energy
At 50 m KE = zero and PE = m g h
PE = 700 kg* 9.80 m/s^2 * 50 m = 343,000 Joules
PE + KE = 343,000 J
At point R
PE = 343,000 J - 1/2 * 700 kg * 400 m^2 / s^2 = 203,000 J
m g h = 203,000 J at point R
h = 203,000 J / (700 kg * 9.80 m/s^2 = 29.6 m height of point R
Check:
343,000 = 700 * 9.80 * 29.6 + 350 * 400 = 343,000
Adding PE and KE at point R
How many kWh of energy would be needed for brushing your teeth with an electric
toothbrush daily for the month of May?
There are models that work with batteries and others with batteries that can be charged in the electrical network. Let's look at an average brush, with a power of 3 W. If you brush your teeth 3 times a day for 5 minutes, you have a daily consumption of 0.00075 kWh. In one month, consumption would amount to 0.225 kWh.
Highlight the reasons why tightness is required when a vaccum needs created
When a vacuum is created, it is created for the purpose to remove anything.
The main purpose of creating vacuum is referred to removal of the air from a particular space or chamber.
Such a kind of procedure should guarantee tightness.
If there is a slight leakage then the air molecules can slip in through that space created.
This will allow air to remain in the place and there won't be any possibility of creating vacuum as there won't be full removal of air.
Therefore, it becomes important to ensure the tightness of vacuum while creating it so that there is no passage created for air to pass through.
To know more about vacuum, refer: https://brainly.com/question/29242274
#SPJ9
si un avión tarda 2 segundos en recorrer 160 metros ¿cuál es su velocidad en km/h?
Answer:
la velocidad del avion es de 304 km/h
Explanation:
Según la pregunta,
La distancia recorrida por un avión en 2 segundos es de 160 metros.
Entonces, para encontrar la velocidad, debemos dividir la distancia recorrida por el tiempo que se tarda en recorrer esa distancia.
[tex] \rm \implies Velocidad = \dfrac{distancia}{tiempo \: empleado} \\ \\ \rm \implies Velocidad = \frac{160}{2} \\ \\ \rm \implies Velocidad = 80 \: m {s}^{ - 1} [/tex]
Para convertir m/s a km/h, el numerador debe dividirse por 1000 y el denominador debe dividirse por 3600. Esto implica que la cantidad total que se da en m/s debe multiplicarse por 3600/1000.
Al convertirlo en forma mínima, la cantidad dada en m/s debe multiplicarse por 18/5 para convertirla en km/h.
[tex] \therefore [/tex]
[tex] \rm \implies Velocidad = 80 \times \dfrac{18}{5} \: km {h}^{ - 1} \\ \\ \rm \implies Velocidad = 16 \times 19 \: km {h}^{ - 1}\\ \\ \rm \implies Velocidad = 304 \: km {h}^{ - 1}[/tex]
Suppose a woman wearing high-heeled shoes has a mass of 20 kg the area of each shoe is 10 cm2. How much pressure does she exert on the ground with both feet or with one foot? Explain your reasoning
She will exert a pressure of 20N/m² for one foot. For both feet 40N/m². The reason is that pressure increases with an increase in force. pressure and decreases within the area.
What is Pressure?
This is the force acting per unit area. It can be calculated using the formula
P=F/A or P= mg/A
Where m = mass of the object
g = acceleration due to gravity
A = area.
From the question given:
m =20kg
A =10cm²
Applying the above formula,
P= (20*10)/10
P=20N/m²
Hence, the pressure exerted by the two feet will be 20+20= 40N/m²
Learn more about pressure on
https://brainly.com/question/12414404
#SPJ1
A car travels 150 kilometers in 3.2 hours. What is the average velocity for the trip in meters per second.
Answer:
13.02 m/s
Explanation:
First, convert the units of kilometer and hours into meter and second. This can be done by multiplying 150 with 1000 since a kilometer equals 1000 meters. This’ll get us the new unit of 150,000 meters.
Then convert 3.2 hours to second by firstly multiplying 3.2 with 60. This’ll get us with 192 minutes since an hour equals 60 minutes. Then multiply 192 by another 60 because a minute equals to 60 seconds. You’ll obtain the new unit of 11520 seconds.
Next, we can now apply the basic velocity formula which is:
[tex]\displaystyle \vec v = \dfrac{\vec s}{t}[/tex]
Where [tex]\vec v[/tex] is velocity, [tex]\vec s[/tex] is displacement and [tex]t[/tex] is time. In this scenario, assume that the car travels in linear path - this means that the displacement equals to distance. Therefore, from the information we have, we can conclude that:
[tex]\vec s[/tex] = 150,000 meters[tex]t[/tex] = 11520 secondsApply in the formula to find velocity:
[tex]\displaystyle {\vec v = \dfrac{150000}{11520}}\\\\\displaystyle{\vec v \approx 13.02 \ \, \sf{m/s}}[/tex]
Therefore, our velocity is approximately 13.02 m/s
The electrical power of a circuit can be calculated by the equation P = V × I. The table below shows the different voltages that can be supplied to the circuit. If current stays the same, which voltage will most likely result in the smallest electrical power?
A B C D
100V 25V 5V 30V
A
B
C
D
Answer: C. 5V
Explanation:
Since P = VI, power is directly proportional to voltage
If current is constant, then the lower the voltage, the lower the power. The lowest voltage shown is 5 Volts.
Interpret information to make judgment.
The teacher is showing the class an experiment using a radioactive source. She insists on these safety precautions
a) No students may sit in the front row
b) The radioactive source is kept in a lead box when not in use.
Explain why each of these precautions is important.
These precautions are important to avoid radiation effects. Lead is powerful in shielding nuclear substances because of its physical residence.
It is dense and difficult, which means it is able to block x-rays and gamma rays from penetrating thru the cloth. whilst these radioactive waves touch the steel, they collide with the lead atoms and get dispersed
Lock radioactive stock materials and sealed assets in a secured box or a secured storage vicinity when not in use. A stock fabric is a radioactive material as provided by using the vendor and does no longer include material withdrawn from the original inventory for experimental use.
You must generally hold radioactive resources, along with any radioactive waste that's in the garage, in suitable boxes internal an appropriate store to defend against unintended harm or loss and to guard employees and the majority.
Learn more about radioactive resources here:-https://brainly.com/question/24218100
#SPJ1
Can someone please explain how to do this?
A babysitter pushing a stroller starts from rest and accelerates uniformly at a rate of 0.778 m/s^2. What is the velocity of the stroller after it has traveled 5.54 m?
Three masses are connected as shown on a smooth horizontal surface.
(Take acceleration due to gravity as 9.8ms^-2)
a)Calculate the acceleration of the mass M3.
b)Calculate the tension in each string.
c)If the surface was not smooth describe how:
1.the acceleration of the system would be affected.
2.the tension in each string would be affected.
a) The acceleration of the mass M3 is 14.42 m/s².
b) The tension in each string. is : T₁ = 5119 N.
T₂= 7714 N.
And T₃ . = 12833 N.
c) If the surface was not smooth, there will be a frictional force which lessen both tension and acceleration of the system.
What is acceleration?Acceleration is rate of change of velocity with time. Due to having both direction and magnitude, it is a vector quantity. Si unit of acceleration is meter/second² (m/s²).
Let the acceleration of the system = a.
And the tension in each string is T₁ , T₂ and T₃ respectively.
Then for M₁ mass;
tension in string T₁ = M₁a
For M₂ mass:
tension in string T₂ = M₂ a
For M₃ mass:
tension in string T₃ - M₃g = M₃ a.
⇒T₃ = M₃g + M₃ a.
And T₃ = T₁ + T₂.
⇒M₃g + M₃ a. = M₂ a + M₁a
⇒ a = M₃g/( M₁ +M₂ -M₃)
= 530× 9.8/ (355+535-530)
= 14.42 m/s².
Then, the tension in each string is T₁ = 355 * 14.42 N = 5119 N.
T₂ = 535×9.8 N = 7714 N.
And T₃ = T₁ + T₂ = 5119 N +7714 N. = 12833 N.
If the surface was not smooth, there will be a frictional force which lessen both tension and acceleration of the system.
Learn more about acceleration here:
brainly.com/question/12550364
#SPJ1
Does Monera move?
20 points
Answer:
Prokaryotic Bacteria
Explanation:
An airplane is traveling 835 km/h in a direction 41.5 ∘ west of north How far north and how far west has the plane traveled after 4.20 h ?
a. The plane traveled 2626.60 km north
b. The plane traveled 2323.81 km west
How to determine how far north and how far west has the plane traveled after 4.20 h?Since the airplane is traveling 835 km/h in a direction 41.5 ∘ west of north, weresolve it into its component velocity vector.
So, its velocity, V = -(835 km/hsin41.5°)i + (835 km/hcos41.5°)j
= -(835 km/h × 0.6626)i + (835 km/h × 0.7490)j
= -(553.29 km/h)i + (625.38 km/h)j
a. How far north has the plane traveled after 4.20 h ?Now the speed of the plane in the north direction is the j component which is 625.38 km/h.
Since the plane traveled 4.20 h, The distance travelled is d = speed × time = 625.38 km/h × 4.20 h
= 2626.60 km
So, the plane traveled 2626.60 km north
b. How far west has the plane traveled after 4.20 h ?Also, the speed of the plane in the west direction is the i component which is 553.29 km/h.
Since the plane traveled 4.20 h, The distance travelled is d = speed × time = 553.29 km/h × 4.20 h
= 2323.81 km
So, the plane traveled 2323.81 km west
Learn more about distance plane travelled here:
https://brainly.com/question/28852901
#SPJ1
If is the angle between and the perpendicular is 90 then the lines of forces are O a. Not sure O b. Zero O C. Maximum O d. None of the above.
If the angle between displacement and force is 90° then the lines of force are zero. The correct option to this question is B.
The work completed is zero if there is a 90 degree angle between the force and the displacement.A scalar quantity, such as work, has simply magnitude and no direction.W= F×s or W= F×scosФ, which stands for "done," is the scalar product of force and displacement.Since cos90° has a value of 0, everything multiplied by 0 also has a value of 0.Because of this, when the angle between the force and the displacement is 90, we say that work is complete. For more information on scalar quantity kindly visit to
https://brainly.com/question/26099846
#SPJ9
Q)What is the force between two small charged spheres having charges of 2 × 10^–7C and 3 × 10^–7 C placed 30 cm apart in the air?
The electrostatic force between the two charged spheres is determined as 6 x 10⁻³ N.
What is the electrostatic force between two charged objects?
The electrostatic force between two charged objects, according to Coulomb's law, is directly proportional to the product of the charges and inversely proportional to the square of the distance between the charges.
F = kq₁q₂/r²
where;
K is Coulomb's constantq₁ is the first chargeq₂ is the second charger is the distance between the chargesF = (9 x 10⁹ x 2 x 10⁻⁷ x 3 x 10⁻⁷) / (0.3²)
F = 6 x 10⁻³ N
Learn more about electrostatic force here: https://brainly.com/question/17692887
#SPJ1
do you believe that doubting is thinking?yes or no then why?
Answer:
yes
Explanation:
Because doubting is thinking something is
wrong
a sample of cube X is shown above. If it’s mass is 244.4 mg, what is its density in g/cm^3
The density of the cube is 1.1 g/cm³
What is density?Density is described as the substance's mass per unit of volume. Mathematically, density is defined as mass divided by volume: density (rho) =mass/ Volume where ρ is the density, m is the mass, and V is the volume.
mass of cube= 244.4mg
volume of cube = 222.2 cm³
density = mass/ volume
density = 244.4/ 222.2 cm³
density = 1.1 g/cm³
Density is essentially a measurement of how tightly matter is packed together. density is a unique physical property of a particular object.
In conclusion, the principle of density was discovered by the Greek scientist Archimedes.
Learn more about density at; https://brainly.com/question/1354972
#SPJ1
WILL GIVE BRAINLIEST PLEASE!!!!
Marco completes one lap around a 200 m circular track. What is his displacement? What is the distance that he ran?
Answer: the displacement should be zero while the distance would be 200
Explanation:
The displacement is the change in position of an object from its origin. The questions states that he ran a full circular lap therefore started as point of origin and ended up at point of origin. This would mean that his displacement is zero.
Distance on the other hand is just simple adding without the use of vectors and such. In this case the distance he ran would be 200m.
A projectile is fired horizontally at 180 m/sec from an altitude of 734.7 m. What is the final vertical velocity of the projectile as it hits the ground?
Answer:
216 m/s
Explanation:
Final velocity will be resultant of the initial horizontal velocity ( 180 m/s) and the vertical velocity from falling 734.7 m
Verital vf = at need to find time
df = 734.7 = 1/2 a t^2
t= 12.2 sec
vf = at
= 9.81 (12.2) = 120 m/s
Just before hotting the ground,
resultant velocity = sqrt(180^2 + 120^2) = 216 m/s