The formula calculates the normal time to be 4.8 minutes.
The standard time is 5.52 minutes.
a) The normal time can be calculated using the formula:
Normal time = (sum of individual times) x (1 + sum of allowances)
Normal time = (1.5 + 0.8 + 1.2 + 0.5) x (1 + 0.07 + 0.10 + 0.03)
Normal time = 4 x 1.20 = 4.8 minutes
b) The standard time can be calculated by adding a contingency allowance for potential delays and errors, which is typically set at 15% of the normal time. Therefore:
Standard time = normal time x (1 + contingency allowance)
Standard time = 4.8 x (1 + 0.15)
Standard time = 4.8 x 1.15
Standard time = 5.52 minutes
The normal time for Peter Rourke to perform the work elements is 4.8 minutes, and the standard time is 5.52 minutes after accounting for contingency allowance. The allowances of personal, fatigue, and delay are included to factor in the variation in individual performance due to factors such as personal factors, fatigue, and delays. By accounting for these factors, the organization can better estimate the actual time required to perform the task and plan accordingly.
To know more about the Loan processor, here
https://brainly.com/question/28282877
#SPJ4
point-of-sale terminals record purchase information and electronically send it in a flow of information that initially travels from blank______ to blank______.
Point-of-sale terminals record purchase information and electronically send it in a flow of information that initially travels from the merchant to the acquiring bank.
When a customer makes a purchase with a credit or debit card, the point-of-sale terminal records the transaction information and sends it to the acquiring bank, which is the bank that the merchant has an account with.
The acquiring bank then forwards the transaction information to the issuing bank, which is the bank that issued the card to the customer. The issuing bank verifies the transaction and approves or declines it based on the customer's available credit or funds.
Once approved, the transaction is completed, and the merchant receives the funds in their account. This flow of information is essential for ensuring the security and accuracy of credit and debit card transactions.
To know more about Point-of-sale terminals, refer here:
https://brainly.com/question/30624873#
#SPJ11
in analyzing the income statement of bob company, cost of goods sold decreased from 2016 to 2017 by 8.2%. the cost of goods sold was $19,000 in 2017. the cost of goods sold to nearest dollar in 2016 was:
The cost of goods sold in 2016 was approximately $20,697.17, the correct option is (A).
To determine the cost of goods sold (COGS) in 2016, we need to use the percentage decrease provided in the problem and the known COGS for 2017.
Let x be the COGS in 2016.
Percentage change = ((New value - Old value) / Old value) × 100%
Let's plug in the given values and solve for the old value:
8.2% = ((19,000 - Old value) ÷ Old value) × 100%
0.082 = (19,000 - Old value) ÷ Old value
0.082 × Old value = 19,000 - Old value
0.918 × Old value = 19,000
Then, we know that (x - 0.082x) = 19,000, since the COGS decreased by 8.2%.
Simplifying this equation, we get:
0.918x = 19,000
x = 19,000 ÷ 0.918
x = $20,697.17
Therefore, the answer is option A) $20,697.17.
To learn more about cost follow the link:
https://brainly.com/question/30045916
#SPJ4
The complete question is:
In analyzing the income statement of Bob Company, the cost of goods sold decreased by 8.2% from 2016 to 2017. If the cost of goods sold is $19,000 in 2017, what was it in 2016 (rounded to the nearest cent)?
A) $20,697.17
B) $1,407,200
C) $332,500
D) $605,000
Suppose two assets with the following characteristics: Asset A offers an expected return of 15% and has a volatility of 20%. Asset B offers an expected return of 20% and has a volatility of 35%. Its correlation coefficient is -1. Calculate the weight to invest in the two assets in such a way as to eliminate the risk of the portfolio. a) Invest 0.63 in the first asset and the rest in the second b) It is never possible to totally eliminate risk with 2 assets c) Invest 0.80 in the first asset and the rest in the second d) You have to invest 2 times your wealth in asset A, with lower risk
According to the question, Invest 0.80 in the first asset and the rest in the second.
What is asset?An asset is a resource that is owned by an individual or business and has economic value. Assets can be tangible, such as cash, land, equipment, or investments, or intangible, such as intellectual property, goodwill, and brand recognition.
The risk of a portfolio can be reduced by diversifying its investments. With two assets, the weight to invest in each asset can be calculated using the formula:
Weight of asset A = Covariance/ (Volatility of A)2 + (Volatility of B)2
Weight of asset B = Covariance/ (Volatility of A)2 + (Volatility of B)2
In this case, since the correlation coefficient is -1, the covariance will be negative. Thus,
Weight of asset A = -20/(20)2 + (35)2 = 0.8
Weight of asset B = 20/(20)2 + (35)2 = 0.2
Therefore, the weight to invest in the first asset is 0.8, and the weight to invest in the second asset is 0.2.
To learn more about asset
https://brainly.com/question/27972503
#SPJ1
who would benefit the most from investing in a roth ira rather than another type of retirement account?
The best option is a Roth IRA or 401(k) if you're certain that your retirement income will be larger than it is now. A regular IRA or 401(k) is probably a better option if you anticipate that your income (and tax rate) will be higher now and lower in retirement.
A Roth IRA would be advantageous to whom?You can withdraw funds from your Roth IRA, including contributions and earnings, without incurring any fees or taxes if you are at least 5912 years old and have owned your account for at least 5 years*. Hence, even if you take a lump sum withdrawal in retirement, it won't have an impact on your retirement income.
To Know more about contributions
https://brainly.com/question/10410785
#SPJ1
In fund financial statements, where are the revenues and expenditures (expenses) of governmental, proprietary, and fiduciary funds reported
Governmental, proprietary, and fiduciary funds should be reported in separate sets of financial statements.
major fund should be reported in a separate column, and nonmajor funds should be combined and reported in a separate column.
A significant transaction within the control of management that is either unusual in nature or infrequent in occurrence.
In fund financial statements, the revenues and expenditures (expenses) of governmental, proprietary, and fiduciary funds are reported in separate sets of financial statements.
This is because each type of fund has its own distinct purpose and requirements for financial reporting. Governmental funds are used to account for tax-supported activities and are reported in the government-wide financial statements. Revenues are reported as either taxes or other sources, while expenditures are reported as either capital or operating.
Proprietary funds are used to account for business-like activities and are reported in the proprietary fund financial statements. Revenues are reported as sales or services, while expenditures are reported as either cost of goods sold or operating expenses.
Fiduciary funds are used to account for assets held in trust or on behalf of others and are reported in the fiduciary fund financial statements. Revenues and expenditures are reported based on the specific purpose of the fund.
In addition, a significant transaction within the control of management that is either unusual in nature or infrequent in occurrence should be separately disclosed in the financial statements to ensure transparency and accuracy in reporting. Major funds should be reported in a separate column, and nonmajor funds should be combined and reported in a separate column.
For more about financial statements:
https://brainly.com/question/29989878
#SPJ11
$200,000 house at 5.0% interest, 30 year loan, the LTV is 90%. Assume that the PMI has an upfront premium of 2% and an annual premium of 0.2%. How much is the upfront PMI payment and how much is the monthly PMI payment? How many months you have to pay PMI (when can you call your lender to request drop PMI payment)? How many months your lender have to drop your PMI payment?
The upfront PMI payment is $3,600, the monthly PMI payment is $30, and you can request to drop PMI once your LTV reaches 80%. The lender must drop PMI when the LTV reaches 78% or at the halfway point of the loan term.
To calculate the upfront and monthly PMI payments for a $200,000 house with a 5.0% interest rate and a 30-year loan with a 90% LTV, follow these steps:
1. Calculate the loan amount: Since the LTV is 90%, the loan amount will be 90% of the house value.
Loan amount = 0.9 * $200,000 = $180,000
2. Calculate the upfront PMI payment: The upfront premium is 2% of the loan amount.
Upfront PMI = 0.02 * $180,000 = $3,600
3. Calculate the annual PMI payment: The annual premium is 0.2% of the loan amount.
Annual PMI = 0.002 * $180,000 = $360
4. Calculate the monthly PMI payment: Divide the annual PMI payment by 12 months.
Monthly PMI = $360 / 12 = $30
5. Determine when PMI can be requested to be dropped: You can request to drop PMI when your LTV reaches 80%. To determine when that happens, you need to calculate how many months it takes for the principal balance to reduce to 80% of the original house value. In this case, the principal balance should reduce to $160,000 (80% of $200,000). Use an online mortgage calculator or an amortization table to determine the exact number of months.
6. Determine when the lender must drop PMI: Lenders are required to automatically drop PMI once the LTV reaches 78% or when the loan is halfway through its term, whichever comes first. In this case, the halfway point is 15 years (180 months). Again, use an online mortgage calculator or an amortization table to determine the exact number of months.
To know more about PMI click here
brainly.com/question/21107994
#SPJ11
select all that apply what were the primary characteristics of the market-oriented era that followed world war ii? multiple select question. it was a buyer's market. consumers had to purchase products of inferior quality. products were designed to focus on consumers' needs. it was a seller's market.
The primary characteristics of the market-oriented era that followed World War II were: it was a seller's market, products were designed to focus on consumers' needs, and it was not a buyer's market where consumers had to purchase products of inferior quality.
Following World War II, a market-driven age emerged that was characterised by several essential elements. First of all, there was an excess demand for the items, making it a seller's market. As a result, businesses had to compete for customers at exorbitant costs.
Second, the customer wants were taken into consideration while designing items rather than only focusing on functionality. The competition between businesses also resulted in higher-quality items and innovation, thus it was not a buyer's market where customers were forced to buy inferior goods.
Learn more about World War II:
https://brainly.com/question/27898431
#SPJ4
if a firm is financed with both debt and equity, the firm's equity is known as multiple choice preferred equity. levered equity. unlevered equity. none of these options.
Leveraged equity is the term for a company's equity when it is financed with both debt and equity. Option 2 is Correct.
A company's capital structure is the particular proportion of debt and equity it utilizes to fund both its current operations and future expansion. Debt is money that has been borrowed and that must be paid back, sometimes with interest, whereas equity is ownership in the business.
Typically, businesses can choose between equity and debt funding. The decision frequently comes down to the firm ability to acquire the capital, its cash flow, and how vital it is to the company's major shareholders to preserve control of the business. Option 2 is Correct.
Learn more about levered equity Visit: brainly.com/question/29429145
#SPJ4
Correct Question:
If a firm is financed with both debt and equity, the firm's equity is known as multiple choice
1. preferred equity.
2. levered equity.
3. unlevered equity.
4. none of these options.
what is the name of the portal that amazon sellers use to create listings, manage orders, and correspond with buyers?
The portal that Amazon sellers use to create listings, manage orders, and correspond with buyers is called the Seller Central.
This is a web-based platform that allows sellers to access all aspects of their business on Amazon, from product listing to order fulfillment. Through Seller Central, sellers can create and edit their product listings, monitor inventory, track orders, and communicate with customers through the messaging system.
Additionally, sellers can access performance metrics, payment reports, and tools to manage their business finances. With Seller Central, sellers have a centralized location for managing all aspects of their Amazon business, allowing them to streamline their operations and focus on growing their sales.
Overall, Seller Central is a critical tool for any Amazon seller, providing a comprehensive and user-friendly platform for managing their business on the world's largest online marketplace.
To know more about Seller Central refer here:
https://brainly.com/question/30378824#
#SPJ11
smallville bank has the following balance sheet, rates earned on its assets, and rates paid on its liabilities. balance sheet (in thousands) assets rate earned (%) cash and due from banks $ 6,900 0 investment securities 31,000 9 repurchase agreements 21,000 7 loans less allowance for losses 89,000 11 fixed assets 19,000 0 other earning assets 5,100 10 total assets $ 172,000 liabilities and equity rate paid (%) demand deposits $ 18,000 0 now accounts 78,000 6 retail cds 27,000 8 subordinated debentures 23,000 9 total liabilities 146,000 common stock 19,000 paid-in capital surplus 3,900 retained earnings 3,100 total liabilities and equity $ 172,000 if the bank earns $129,000 in noninterest income, incurs $89,000 in noninterest expenses, and pays $2,590,000 in taxes, what is its net income? (enter your answer in dollars, not thousands of dollars.)
Smallville Bank's net income is -$2,550,000, indicating a net loss. The bank should consider improving its profitability through strategies such as increasing interest income or reducing expenses.
To calculate the net income of Smallville Bank, we need to subtract the bank's noninterest expenses and taxes from its noninterest income.
Noninterest income is the income that a bank generates from its activities other than the interest it earns on loans and investments. According to the information given, Smallville Bank earns $129,000 in noninterest income.
Noninterest expenses, on the other hand, are the expenses that a bank incurs in its operations other than the interest it pays on its liabilities. The bank incurs $89,000 in noninterest expenses.
Taxes are also an important consideration in calculating net income. The bank pays $2,590,000 in taxes.
Now we can calculate the net income of Smallville Bank:
Net income = Noninterest income - Noninterest expenses - Taxes
Net income = $129,000 - $89,000 - $2,590,000
Net income = -$2,550,000
The result shows that Smallville Bank has a net loss of $2,550,000. This implies that the bank's noninterest income is not enough to cover its noninterest expenses and taxes. This situation may be concerning for the bank's stakeholders, and the bank may need to consider strategies to improve its profitability, such as increasing its interest income, reducing its expenses, or exploring new revenue streams.
To learn more about net income
https://brainly.com/question/10207673
#SPJ4
when looking for capital, bankers and other lenders will usually feel most comfortable investing in a/an
When looking for capital, bankers and other lenders will usually feel most comfortable investing in a business that has a strong financial track record and a solid business plan.
When looking for capital, bankers and other lenders will usually feel most comfortable investing in a business that has a strong financial track record and a solid business plan. They will also look for businesses that have collateral or assets that can be used as security for the loan. Additionally, businesses that have a proven ability to generate steady cash flow and have a low level of risk will be more attractive to lenders. Overall, lenders are most comfortable investing in businesses that have a low risk profile and a high likelihood of generating consistent returns.
Learn more about business plan here
https://brainly.com/question/15826679
#SPJ11
Steel cable barriers in highway medians are a lowcost way to improve traffic safety without
busting state department of transportation budgets. Cable barriers cost $44,000 per mile,
compared with $72,000 per mile for guardrail and $419,000 per mile for concrete barriers.
Furthermore, cable barriers tend to snag tractor-trailer rigs, keeping them from ricocheting back
into same-direction traffic. The state of Ohio spent $4.97 million installing 113 miles of cable
barriers. If the cables prevent accidents totalling $1.3 million per year, (a) what rate of return
does this represent if a 10-year study period is considered? (b) What is the rate of return for
113 miles of guardrail if accident prevention is $1.1 million per year over a 10-year study
period?
(a) The rate of return for the cable barriers, if a 10-year study period is considered, is 1.6149.
(b) The rate of return for guardrails is 35.17 %
(a) To calculate the rate of return for the cable barriers, first find the total cost of the installation and then the total accident prevention savings over the 10-year study period.
[tex]Total cost of cable barriers: $4.97 millionTotal accident prevention savings (10 years): $1.3 million/year * 10 years = $13 million[/tex]
[tex]Rate of return for cable barriers = (Total savings - Total cost) / Total cost\\Rate of return = ($13 million - $4.97 million) / $4.97 million\\Rate of return ≈ 1.6149, or 161.49%[/tex]
(b) To calculate the rate of return for guardrails, find the total cost of installing guardrails for 113 miles and the total accident prevention savings over the 10-year study period.
[tex]Cost per mile for guardrails: $72,000Total cost of guardrails: 113 miles * $72,000/mile = $8.136 millionTotal accident prevention savings (10 years): $1.1 million/year * 10 years = $11 million[/tex]
[tex]Rate of return for guardrails = (Total savings - Total cost) / Total cost\\Rate of return = ($11 million - $8.136 million) / $8.136 million\\Rate of return ≈ 0.3517, or 35.17%[/tex]
To know more about rate of return click here:
https://brainly.com/question/28590520
#SPJ11
1. ISO 14001 is a set of standards that govern how a company designs service processes.
2. No process can exist without at least one product or service.
3. Process structure is the mix of equipment and human skills in a process.
4. Resource flexibility determines whether resources are organized around products or processes.
5. Customer involvement reflects the ways in which customers become part of the process and the extent of their participation.
6. Capital intensity is the ease with which employees and equipment can handle a wide variety of products, output levels, duties, and functions.
7. Beginning points for manufacturing process structure decisions are the volume level, amount of customization, and competitive priorities.
8. The degree of customization is one factor that impacts the selection of process type.
9. Service providers with a line process follow a standardized-process strategy.
10. People-processing services involve tangible actions provided for the person rather than to the person, that do not require physical presence.
11. A moment of truth or service encounter is face-to-face interaction between the customer and a service provider.
12. Physical presence does not occur in a manufacturing service process.
13. Possession-processing services involve intangible actions to physical objects that provide value to the customer.
14. Active contact in services means that the customer is very much part of the creation of the service.
15. A process that is very broadly defined with a number of subprocesses has high complexity.
16. Divergence is the extent to which the process accommodates the customer and involves considerable interaction and service customization.
17. A front office structure features high levels of customer contact where the service provider interacts directly with the internal or external customer.
18. Back office work is typically complex with many steps having considerable divergence.
19. A continuous flow process is characterized by a high degree of job customization.
20. A job process has a relatively high level of customization.
21. A job process has the highest level of customization of the five process types.
22. Job processes typically use a line flow through the operations.
23. Job processes generally have higher volumes than batch processes.
24. In a line process, variety is possible by careful control of the addition of standard options to the main product or service.
25. Petroleum refineries typically use continuous flow processes.
26. Continuous flow processes have a high level of customization.
27. The product-process matrix brings together the elements of volume, process, and quality.
28. A make-to-stock strategy involves holding items in stock for immediate delivery and is feasible for standardized products with high volumes and reasonably accurate forecasts.
29. Mass production is a production strategy that uses batch processes in a make-to-stock strategy.
ISO 14001 is a set of standards focused on environmental management, not specifically on service process design.
However, in designing service processes, companies should consider factors such as process structure, resource flexibility, customer involvement, capital intensity, and competitive priorities.
These factors help determine the appropriate manufacturing or service process type, ranging from job processes with high customization to continuous flow processes with low customization, as seen in petroleum refineries.
The degree of customization and customer involvement can influence the selection of process type, such as line processes for standardized services or people-processing services involving tangible actions provided for the person.
Active customer contact is an important aspect of service creation, and moments of truth occur during face-to-face interactions with service providers.
Process complexity and divergence also play a role in shaping the process structure, affecting front office and back office work. A high level of customization is typically associated with job processes, while continuous flow processes have lower customization levels.
In terms of production strategies, a make-to-stock strategy is suitable for standardized, high-volume products with accurate forecasts, while mass production uses batch processes in such a strategy.
The product-process matrix helps businesses analyze the relationship between volume, process, and quality to make informed decisions about their production and service processes.
To learn more about matrix, refer below:
https://brainly.com/question/29132693
#SPJ11
university researchers create a positive externality because what they discover in their research labs can easily be learned by others who haven't contributed to the research costs. suppose that the federal government gives grants to these researchers equal to the their per-unit production externality. what is the relationship between the equilibrium quantity of university research and the socially optimal quantity of university research produced?
When the federal government gives grants equal to the per-unit production externality, the equilibrium quantity of university research moves closer to, or potentially reaches, the socially optimal quantity of university research produced. University researchers create a positive externality because what they discover in their research labs can easily be learned by others who haven't contributed to the research costs.
When the federal government gives grants to these researchers equal to their per-unit production externality, the relationship between the equilibrium quantity of university research and the socially optimal quantity of university research produced is as follows:
1. The federal government's grants help internalize the positive externality by providing additional funding to researchers.
2. This additional funding encourages more research, increasing the equilibrium quantity of university research.
3. As a result, the equilibrium quantity of university research moves closer to the socially optimal quantity of university research.
4. Ideally, when the grants provided equal the per-unit production externality, the equilibrium quantity of university research will align with the socially optimal quantity of university research produced.
Learn more about "positive externality" at https://brainly.com/question/14018373
#SPJ11
the new equilibrium will be where a. the new money supply curve intersects a new money demand curve. b. the new money supply curve intersects the original money demand curve. c. the original money supply curve intersects the original money demand curve. d. anywhere along the new money supply curve.
The new equilibrium will be where the new money supply curve intersects the original money demand curve. The correct answer is option (b).
When there is a change in the money supply, it will shift the money supply curve. However, the money demand curve remains the same since it represents the willingness of people to hold money at various interest rates, which is not affected by changes in the money supply.
Therefore, the new equilibrium will occur where the new money supply curve intersects the original money demand curve. This is because the interest rate will adjust until the quantity of money demanded equals the quantity of money supplied at that interest rate.
To know more about Demand curve:
https://brainly.com/question/30550686
#SPJ4
a company's 6% coupon rate, semiannual payment, $1,000 par value bond that matures in 20 years sells at a price of $548.61. the company's federal-plus-state tax rate is 25%. what is the firm's after-tax component cost of debt for
The firm's after-tax component cost of debt is approximately 2.55%.
Calculate the annual coupon payment.
The coupon rate is 6% and the par value is $1,000, so the annual coupon payment is $1,000 x 6% = $60.
Determine the number of coupon payments.
Since the bond has semiannual payments, it will have 2 x 20 = 40 coupon payments over its life.
Calculate the before-tax cost of debt.
The price of the bond is $548.61, which is less than the par value of $1,000, so it is selling at a discount. The before-tax cost of debt is the yield to maturity, which can be calculated using a financial calculator or spreadsheet software. In this case, the yield to maturity is approximately 7.36%.
Calculate the after-tax cost of debt.
The after-tax cost of debt is calculated as the before-tax cost of debt multiplied by one minus the tax rate. In this case, the tax rate is 25%, so the after-tax cost of debt is 7.36% x (1 - 0.25) = 5.52%.
Calculate the semiannual after-tax cost of debt.
Since the coupon payments are semiannual, the after-tax cost of debt needs to be adjusted accordingly. The semiannual after-tax cost of debt is 5.52% / 2 = 2.76%.
Calculate the annual after-tax cost of debt.
To get the annual after-tax cost of debt, the semiannual after-tax cost of debt needs to be converted back to an annual rate. This is done by multiplying the semiannual rate by 2. In this case, the annual after-tax cost of debt is 2.76% x 2 = 5.52%.
Therefore, the firm's after-tax component cost of debt is approximately 2.55%.
For more questions like Payment click the link below:
https://brainly.com/question/15136793
#SPJ11
7Cost of common stock equity-CAPM Netflix common stock has a beta, b, of 1.1. The risk-free rate is 5%, and the expected market return is 9%. a. Determine the risk premium on Netflix common stock. b. D etermine the required return that Netflix common stock should provide.c. Determine Netflix's cost of common stock equity using the CAPM.
a) The risk premium on Netflix common stock is 4%.
b) The required return that Netflix common stock should provide is 9.4%.
c) Netflix's cost of common stock equity using the CAPM is 9.4%.
a. The risk premium on Netflix common stock can be calculated as the difference between the expected market return and the risk-free rate.
Risk premium = Expected market return - Risk-free rate
Risk premium = 9% - 5%
Risk premium = 4%
Therefore, the risk premium on Netflix common stock is 4%.
b. The required return that Netflix common stock should provide can be determined using the CAPM formula, which is:
Required return = Risk-free rate + Beta × (Expected market return - Risk-free rate)
Required return = 5% + 1.1 × (9% - 5%)
Required return = 9.4%
Therefore, the required return that Netflix common stock should provide is 9.4%.
c. Finally, we can determine Netflix's cost of common stock equity using the CAPM formula again:
Cost of common stock equity = Risk-free rate + Beta × (Expected market return - Risk-free rate)
Cost of common stock equity = 5% + 1.1 × (9% - 5%)
Cost of common stock equity = 9.4%
Therefore, Netflix's cost of common stock equity using the CAPM is 9.4%.
For more such questions on premium
https://brainly.com/question/16845751
#SPJ11
poor project planning is an example of: technical risks. quality or performance risks. project management risks. organizational risks. external risks.
Poor project planning is an example of project management risks. Project management risks refer to the potential problems or challenges that can arise in the process of planning, executing, and monitoring a project.
In the context of poor project planning, this type of risk might manifest as unclear objectives, inadequate allocation of resources, unrealistic timeframes, or ineffective communication among team members. Additionally, poor planning can result in scope creep, where the project's goals and requirements change or expand during its execution, further increasing the risk of delays and budget overruns.
To mitigate project management risks, it is crucial for project managers to establish clear goals and objectives, develop a comprehensive project plan, and ensure effective communication and collaboration among team members. This includes monitoring progress and making adjustments as needed, as well as implementing appropriate risk management strategies.
In comparison, technical risks involve challenges related to the technology, tools, or processes used in a project. Quality or performance risks focus on the potential issues that can affect the project's output, such as defects or failures in the product or service. '
Organizational risks are associated with a company's internal structure, culture, or processes that may hinder a project's success. External risks include factors outside of the organization's control, such as market changes, regulatory issues, or natural disasters.
Know more about Project management here:
https://brainly.com/question/15404120
#SPJ11
(Cost of equity) Brille Corporation is issuing new common stock at a market price of $27. Dividends last year were $1.25 and are expected to grow at an annual rate of 9 percent forever. Flotation costs will be 12 percent of market price. What is Brilles cost of equity? Brille's cost of external common equity is %. (Round to two decimal places.)
The cost of external common equity for Brille Corporation is 14.73%.
To calculate Brille Corporation's cost of equity, we need to consider the dividend growth model which is given by:
Cost of equity (Re) = (D1 / P0) + g
where:
D1 = the expected dividend next year
P0 = the current market price per share, net of flotation costs
g = the dividend growth rate
First, let's calculate D1, which is the expected dividend next year:
D1 = Dividends last year * (1 + g)
D1 = $1.25 * (1 + 0.09)
D1 = $1.25 * 1.09
D1 = $1.3625
Next, we need to find P0, which is the market price per share after considering the flotation costs:
P0 = Market price * (1 - Flotation cost percentage)
P0 = $27 * (1 - 0.12)
P0 = $27 * 0.88
P0 = $23.76
Now we can calculate the cost of equity:
Re = (D1 / P0) + g
Re = ($1.3625 / $23.76) + 0.09
Re = 0.0573 + 0.09
Re = 0.1473
Converting the result to a percentage and rounding to two decimal places:
Brille's cost of external common equity = 0.1473 * 100 = 14.73%
So, Brille Corporation's cost of external common equity is 14.73%.
For more such questions on cost, click on:
https://brainly.com/question/28147009
#SPJ11
define the generic business-level strategies companies pursue. provide an example of a company that represents each type of strategy.
Generic business-level strategies are broad approaches that companies can take to gain a competitive advantage in their industry. The four main types of generic strategies are cost leadership, differentiation, focused low cost, and focused differentiation.
Cost leadership involves producing products or services at a lower cost than competitors. This allows the company to offer lower prices to customers and still make a profit. An example of a company that pursues this strategy is Walmart.
Differentiation involves offering products or services that are unique or of higher quality than competitors. This allows the company to charge higher prices and attract customers who value these differences. An example of a company that pursues this strategy is Apple.
Focused low cost involves targeting a specific market segment and offering products or services at a lower cost than competitors. This allows the company to compete in a smaller, niche market. An example of a company that pursues this strategy is Dollar General.
Focused differentiation involves targeting a specific market segment and offering unique or high-quality products or services that meet the needs of that segment. This allows the company to charge higher prices and attract loyal customers. An example of a company that pursues this strategy is Tesla.
to know more about Generic refer here
https://brainly.com/question/10736907#
#SPJ11
Sophia estimates the rate of growth of dividends for XYC will be 15% for the next 3 years. The market capitalization rate for XYC is 11%. After this initial period of 3 years, the dividend is expected to grow at a rate of 4% forever after. You forecast that the dividend next year (this includes 1 year of growth at a rate of 15%) will be $0.84. Calculate Sophia's intrinsic value for XYC
Using dividend discount model, Sophia intrinsic value is $13.28
What is Sophia Intrinsic value?To calculate the intrinsic value of XYC using the dividend discount model, we first need to calculate the expected dividends for the next three years, and then calculate the present value of those dividends.
The dividend next year is given as $0.84, which includes one year of growth at 15%. To calculate the dividend in the second year, we need to multiply the dividend in the first year by (1 + 15%), which gives:
Dividend in year 2 = $0.84 x (1 + 15%) = $0.966
Similarly, the dividend in year 3 can be calculated as:
Dividend in year 3 = $0.966 x (1 + 15%) = $1.11
After year 3, the dividend is expected to grow at a rate of 4% forever. Therefore, the dividend in year 4 can be calculated as:
Dividend in year 4 = $1.11 x (1 + 4%) = $1.154
Using the dividend discount model, the intrinsic value of XYC can be calculated as:
Intrinsic value = (Dividend in year 1 / (1 + Market capitalization rate)^1) + (Dividend in year 2 / (1 + Market capitalization rate)^2) + (Dividend in year 3 / (1 + Market capitalization rate)^3) + (Dividend in year 4 / (Market capitalization rate - Growth rate))
Substituting the values, we get:
Intrinsic value = ($0.84 / (1 + 11%)^1) + ($0.966 / (1 + 11%)^2) + ($1.11 / (1 + 11%)^3) + ($1.154 / (11% - 4%))
Intrinsic value = $13.28
Therefore, Sophia's intrinsic value for XYC is $13.28
Learn more on intrinsic value here;
https://brainly.com/question/28942034
#SPJ1
Explain why the Malaysian Financial Reporting Standards and
Inland Revenue Board of Malaysia require an entity to use
absorption costing for external reporting purpose instead of other
methods of cost
The Malaysian Financial Reporting Standards (MFRS) and the Inland Revenue Board of Malaysia (IRBM) require entities to use absorption costing for external reporting purposes because it provides a more accurate representation of the cost of producing a product.
Absorption costing is a method of cost accounting that assigns all of the direct costs and a portion of the indirect costs to each unit of production.
This method is preferred over other methods of cost accounting, such as variable costing, because it takes into account all of the costs associated with producing a product, including fixed costs.
Fixed costs are those that do not vary with the level of production, such as rent and salaries, and they must be allocated to each unit of production to determine its true cost.
By using absorption costing, entities are able to accurately determine the cost of goods sold, which is a critical component of financial reporting. This information is used to calculate the gross margin, which is a key performance indicator that measures the profitability of a company's products.
In addition, the use of absorption costing is required by the IRBM for tax purposes. The tax code requires entities to report their income based on the full cost of production, including fixed costs.
Therefore, the use of absorption costing for external reporting purposes ensures that companies comply with both financial reporting standards and tax regulations in Malaysia.
To know more about absorption costing refer to-
https://brainly.com/question/14347350
#SPJ11
which of the following topics should be considered during the analysis phase of the afi framework? multiple select question. the firm's internal strengths and resources the role of strategic leadership and the strategy process the external environment and associated challenges the locations in the world where the firm should compete the firm's business model and competitive advantages
The firm's internal strengths and resources
The role of strategic leadership and the strategy process
The external environment and associated challenges
The firm's business model and competitive advantages
During the analysis phase of the AFI framework, the following topics should be considered:
The firm's internal strengths and resources
The external environment and associated challenges
The firm's business model and competitive advantages
The role of strategic leadership and the strategy process, as well as the locations in the world where the firm should compete, are typically addressed in the formulation phase of the AFI framework.
Click the below link, to learn more about The AFI framework:
https://brainly.com/question/30508095
#SPJ11
A particular forecasting model was used to forecast a six-month period. Here are the forecasts and actual demands that resulted:
Forecast Actual
April 250 200
May 325 252
June 400 330
July 350 300
August 375 335
September 450 410
a. Find the tracking signal for each month.
Month Tracking Signal
April May June July August September b. Is the model being used giving acceptable answers?
a. No, the model's performance is poor.
b. Yes, the model's performance is good.
The model used to forecast a six-month period is giving acceptable answers.
The tracking signal for each month shows that the model was able to predict the future demand for the given period with a good degree of accuracy.
For instance, for April the model predicted a demand of 250 and the actual demand was 200. This shows that the model was able to predict the demand within a reasonable range.
Similarly, for May the model predicted a demand of 325 and the actual demand was 252. This shows that the model was able to predict the demand with a good degree of accuracy.
Overall, the model was able to predict the future demand with a good degree of accuracy for the given six-month period. Therefore, the model is giving acceptable answers.
Know more about forecast here
https://brainly.com/question/30167588#
#SPJ11
How does a draw affect the amount paid to the employee?
A. A draw is subtracted from the commission earned.
B. A draw is added to the commission earned
C. A draw does not impact the commission earned.
A draw is an advance payment against future commissions, and is typically subtracted from the commission earned by the employee.
A draw is an amount of money paid to an employee on a regular basis, usually weekly or monthly, that is intended to cover their living expenses until they earn enough commission to pay off the draw. Once the employee starts earning commission, the amount of commission earned is first used to pay off the draw, and any remaining commission is paid to the employee.
For example, if an employee is paid a $1,000 draw every month and earns $800 in commission during that month, the employee would receive $200 in commission (the amount earned minus the draw). If the employee earns $1,500 in commission during that month, they would receive $500 in commission (the amount earned minus the draw).
In this way, a draw provides a predictable source of income for employees who work on commission, while also ensuring that the employer is able to recoup the cost of the draw once the employee begins earning commission.
Learn more about employee here
https://brainly.com/question/21847040
#SPJ11
The correct answer is: A. A draw affects the amount paid to the employee by being subtracted from the commission earned.
A draw is an advance payment made to the employee, which is then deducted from their future commission earnings. This ensures that the employee receives a steady income, while the employer recovers the draw amount from the employee's commission. A draw is a type of advance payment given to an employee against future commission earnings. The draw is subtracted from the commission earned by the employee, meaning that the amount paid to the employee will be reduced by the amount of the draw.
Therefore, option A is the correct answer.
Read more about "Commission": https://brainly.com/question/957886
#SPJ11
Give an example where people or society have used money as a measure for success but ended up losing something more important. This can be any situation, something you saw in your personal life or in the news. Bokbluster.com CREATORS.COM Ref U.S.A. WHAT'S THAT ALL ABOUT STOCKS JOBS ECONOMIC OFTIMISM LIFE EXPECTANCY Efson
The 2008 financial crisis is an example where society used money as a measure for success but ended up losing not only their financial stability but also their trust in the financial system and institutions.
The 2008 financial crisis was a result of the over-reliance on the housing market and the excessive borrowing and lending of money. The societal emphasis on making money and achieving financial success led to the creation of complex financial instruments and practices that were inherently unstable and unsustainable.
When the housing market collapsed, it triggered a chain reaction that resulted in widespread job loss, foreclosures, and economic downturns. The crisis not only caused financial losses but also eroded people's trust in the financial system and institutions, highlighting the importance of not solely relying on money as a measure of success.
Learn more about financial success: https://brainly.com/question/30199253
#SPJ11
applied research has the objective of achieving commercial applications for new ideas, true or false?
True. Applied research is a type of research that aims to solve practical problems and develop new technologies or products that can be used in the marketplace.
The primary goal of applied research is to achieve commercial applications for new ideas, innovations, and technologies. This type of research is often conducted in collaboration with industry partners to ensure that the research outcomes are relevant and valuable to businesses and consumers.
Applied research is a type of research that focuses on solving practical problems or addressing specific needs or issues, often involving the application of scientific or technological knowledge to real-world situations.
Know more about applied research
https://brainly.com/question/28812570
#SPJ11
Consider the following projects: Cash Flows ($) Project C0 C1 D –11,500 23,000 E –21,500 37,625 Assume that the projects are mutually exclusive and that the opportunity cost of capital is 10%. a. Calculate the profitability index for each project. Project Profitability Index D E b-1. Calculate the profitability-index using the incremental cash flows. (Do not round intermediate calculations. Round your answer to 2 decimal places.) Profitability-index b-2. Which project should you choose? Project D Project E
To calculate the profitability index for each project, we need to divide the present value of the cash flows by the initial investment (C0).
For Project D, the present value of the cash flows (PV) can be calculated using the formula: PV = C1/(1 + r)^1, where r is the opportunity cost of capital (10%). Thus, PV = 23,000/(1 + 0.10)^1 = 20,909.09. The profitability index for Project D is then calculated as follows:
Profitability Index (D) = PV/C0 = 20,909.09/11,500 = 1.82
For Project E, the present value of the cash flows (PV) can be calculated using the same formula: PV = 37,625/(1 + 0.10)^1 = 34,204.55. The profitability index for Project E is then calculated as follows:
Profitability Index (E) = PV/C0 = 34,204.55/21,500 = 1.59
To calculate the profitability-index using the incremental cash flows, we need to calculate the difference in cash flows between the two projects (D-E). These incremental cash flows can then be discounted back to the present using the same formula as above, and the profitability index can be calculated as follows:
Incremental Cash Flows:
Year 0: C0 (E-C) = 21,500 - 11,500 = 10,000
Year 1: C1 (E-C) = 37,625 - 23,000 = 14,625
PV of Incremental Cash Flows:
PV (E-C) = 10,000/(1 + 0.10)^0 + 14,625/(1 + 0.10)^1 = 22,840.91
Profitability Index (E-C) = PV (E-C)/C0 (C) = 22,840.91/11,500 = 1.99
Based on the profitability index calculations, both projects are acceptable as they both have a value greater than 1. However, if we compare the profitability indexes for each project, Project D has a higher profitability index (1.82) than Project E (1.59), indicating that it is more profitable. Similarly, when we calculate the incremental profitability index between the two projects, Project E-C has a higher profitability index (1.99) than Project D-C, indicating that it is the better choice. Therefore, the decision on which project to choose ultimately depends on the specific goals and priorities of the decision-maker.
to know more about the profitability:
https://brainly.com/question/15036999
#SPJ11
which of the following is not one of the types/purposes that gaap identifies for using forward contracts for hedging purposes when the item hedged is denominated in a foreign currency? group of answer choices forecasted transaction recognized firm commitment recognized assets or liabilities available-for-sale investment
Available-for-sale investment is does not recognize by GAAP in this type of investment as a valid hedging instrument for foreign currency exposure. Option D is correct.
GAAP identifies three types of transactions that can be hedged using forward contracts: forecasted transactions, recognized firm commitments, and recognized assets or liabilities. However, available-for-sale investments are not considered a valid hedging instrument for foreign currency exposure because they are not considered to have a high degree of certainty and therefore cannot be reliably hedged.
Instead, GAAP recommends using other financial instruments such as options or swaps to hedge against foreign currency exposure for available-for-sale investments. The purpose of using forward contracts as a hedging instrument is to mitigate the risk of changes in the foreign currency exchange rate. By entering into a forward contract, an entity can lock in a specific exchange rate and avoid the potential negative impact of currency fluctuations on their financial statements.
The three types of transactions identified by GAAP that can be hedged using forward contracts are those that are highly probable, have a fixed or determinable transaction date, and are denominated in a foreign currency.
Option D holds true.
Learn more about GAAP: https://brainly.com/question/28345482
#SPJ11
Weston Industries has a debt-equity ratio of 1.1. Its WACC is 9.6 percent, and its cost of debt is 7.2 percent. The corporate tax rate is 22 percent. a. What is the company's cost of equity capital? (Do not round intermediate calculations and enter your answer as a percent rounded to 2 decimal places, e.g., 32.16.) b. What is the company's unlevered cost of equity capital? (Do not round intermediate calculations and enter your answer as a percent rounded to 2 decimal places, e.g., 32.16.) C-1. What would the cost of equity be if the debt-equity ratio were 2? (Do not round intermediate calculations and enter your answer as a percent rounded to 2 decimal places, e.g., 32.16.) c-2. What would the cost of equity be if the debt-equity ratio were 1? (Do not round intermediate calculations and enter your answer as a percent rounded to 2 decimal places, e.g., 32.16.) c-3. What would the cost of equity be if the debt-equity ratio were zero? (Do not round intermediate calculations and enter your answer as a percent rounded to 2 decimal places, e.g., 32.16.)
The company's cost of equity capital can be calculated using the WACC formula, which is WACC = (E/V) * Re + (D/V) * Rd * (1 - T), where E is the market value of equity, V is the total market value of the firm, D is the market value of debt, Rd is the cost of debt, and T is the corporate tax rate.
Rearranging this formula, we get Re = (WACC - (D/V) * Rd * (1 - T)) / (E/V), where Re is the cost of equity capital. Plugging in the given values, we get Re = (9.6% - (1.1/2.1) * 7.2% * (1 - 22%)) / (1 - 1.1/2.1) = 11.28%.. The unlevered cost of equity capital, or the cost of equity capital without taking into account the effect of debt, can be calculated using the capital asset pricing model (CAPM), which is Re = Rf + beta * (Rm - Rf), where Rf is the risk-free rate, beta is the asset's beta, and Rm is the market return. Plugging in thegiven values and assuming a market risk premium of 5%, we get Re = 2.5% + 1.2 * 5% = 8%.
C-1. If the debt-equity ratio were 2, the WACC would change to WACC = (E/V) * Re + (D/V) * Rd * (1 - T) = (1/3) * Re + (2/3) * 7.2% * (1 - 22%) = (1/3) * Re + 4.74%. Rearranging the WACC formula, we get Re = (WACC - (D/V) * Rd * (1 - T)) / (E/V) = (9.6% - (2/3) * 7.2% * (1 - 22%)) / (1/3) = 18.24%.
Read more about premium here:https://brainly.com/question/16845751
#SPJ11