Please answer all questions provided in the picture.

The molecular formula of a compound having an empirical formula [tex]NH_2[/tex] (Molecular weight = 32.05 g/mol) could be [tex]N_2H_4[/tex].

To find the molecular formula of a compound with the given empirical formula ([tex]NH_2[/tex]), we will follow these steps:
1. Determine the molar mass of the empirical formula.
2. Divide the given molar mass of the compound by the molar mass of the empirical formula.
3. Multiply the empirical formula by the obtained ratio to get the molecular formula.
Step 1: Calculate the molar mass of the empirical formula [tex]NH_2[/tex]:
N = 14.01 g/mol (nitrogen)
H = 1.01 g/mol (hydrogen)
Molar mass of [tex]NH_2[/tex] = 14.01 + (2 x 1.01) = 16.03 g/mol
Step 2: Divide the given molar mass (32.05 g/mol) by the molar mass of the empirical formula (16.03 g/mol):
32.05 / 16.03 ≈ 2
Step 3: Multiply the empirical formula ([tex]NH_2[/tex]) by the obtained ratio (2) to get the molecular formula:
[tex]N_2H_4[/tex]

To learn more about molecular formula click here https://brainly.com/question/28647690

#SPJ11

A pH between 7.2 and 7.3 (option c) is optimal for eye irritation control, but is not optimal for chlorine effectiveness.

The pH scale measures the acidity or alkalinity of a solution. For swimming pools, a slightly alkaline pH level (between 7.2 and 7.6) is ideal for preventing eye irritation and maintaining the effectiveness of chlorine as a disinfectant. However, a pH between 7.2 and 7.3, while comfortable for the eyes, is not the most effective range for chlorine.

Hence,  The optimal pH range for eye irritation control (7.2-7.3) is not the most effective range for chlorine effectiveness in swimming pools.

learn more about pH click here:

https://brainly.com/question/172153

#SPJ11

Yes for instance.

once given the physical properties of the alkali metal you can be able to indicate the group and where you can find them in the periodic table. properties like it being soft and having relatively low melting point (Li, Na, K, RB, CS, Fr)

or once been said that it reacts with group 7 Elements that means we are quick to know it out of those elements.

now to answer your question specifically, if the information given upon says an element burns in air with a yellow flame. Then we are quick to say it's Sodium.

so yeah.

The correct answer is: the total enthalpy is constant from the freestream to the combustor entrance.
In a supersonic ramjet engine, air is decelerated and compressed by an inlet before entering the combustion chamber at very low speed. The air then reacts with fuel and is expelled by a nozzle.

If we assume all processes are adiabatic except for the combustion chamber, which of the following statements is true?
The correct answer is: the total enthalpy is constant from the freestream to the combustor entrance.
Enthalpy is a thermodynamic property that represents the total energy of a system, including both its internal energy and the work required to maintain its pressure and volume. In an adiabatic process, where there is no heat transfer, the total enthalpy remains constant.
In the case of a supersonic ramjet engine, the total enthalpy is constant from the freestream to the combustor entrance. This is because the air is compressed by the inlet, which increases its internal energy and enthalpy. As the air enters the combustion chamber, fuel is added and combustion takes place, which further increases the enthalpy of the air-fuel mixture. However, since the combustion chamber is not adiabatic, there is heat transfer from the combustion products to the surroundings, which decreases the enthalpy of the air-fuel mixture. As a result, the total enthalpy of the mixture remains constant from the freestream to the combustor entrance.
After leaving the combustor, the air-fuel mixture expands through a nozzle, which further decreases its enthalpy. However, since the nozzle is also adiabatic, the total enthalpy of the mixture remains constant from the combustor entrance to the exhaust.

for more such questions on   compressed

https://brainly.com/question/27096986

#SPJ11

During the electrolysis of aqueous copper sulfate using stainless steel electrodes, following changes can be observed:

- A brown color formed at one electrode (the cathode)

- The indicator turned yellow at one electrode (the anode) and blue at the other electrode (the cathode)
- Copper was plated onto one of the electrodes (the cathode)
- Gas bubbles were visible at both electrodes, with twice as much gas being formed at the cathode compared to the anode.

Firstly, copper ions (Cu2+) are reduced at the cathode (negative electrode), resulting in the deposition of copper metal. This can be seen as a brown color forming on the cathode surface. Additionally, hydrogen gas is produced at the cathode due to the reduction of water molecules.
At the anode (positive electrode), the sulfate ions (SO42-) are oxidized, producing oxygen gas and releasing electrons. This can be seen as gas bubbles forming at the anode. However, since stainless steel is an inert material, it does not react with the sulfate ions, and therefore no brown color is formed on the anode surface.
The indicator used in this experiment is likely to be a pH indicator, which changes color depending on the acidity or basicity of the solution. At the cathode, the pH of the solution is likely to become more basic due to the production of hydroxide ions (OH-), resulting in the indicator turning blue. At the anode, the pH is likely to become more acidic due to the production of hydrogen ions (H+), resulting in the indicator turning yellow.
Therefore, the correct answers to the question are:
- A brown color formed at one electrode (the cathode)
- The indicator turned yellow at one electrode (the anode) and blue at the other electrode (the cathode)
- Copper was plated onto one of the electrodes (the cathode)
- Gas bubbles were visible at both electrodes, with twice as much gas being formed at the cathode (due to the production of hydrogen gas during the reduction of water molecules) compared to the anode (due to the production of oxygen gas during the oxidation of sulfate ions).

for more such question on electrolysis

https://brainly.com/question/24063038

#SPJ11

The correct expression for the equilibrium constant for reaction 3 will be K3= K1/K2. The correct option is C.

The given equations represent the equilibrium constants for three different reactions. The first equation represents the equilibrium constant (Ki) for the reaction between HOCH and water to form H₃O⁺ and OCI. The second equation represents the equilibrium constant (K) for the reaction between two water molecules to form H₃O⁺ and OH⁻. The third equation represents the equilibrium constant (K3) for the reaction between OCI and water to form HOCl and OH⁻.

To determine the expression for K3, we can use the principle of equilibrium constant multiplication. According to this principle, if a reaction can be expressed as the sum of two or more reactions, the equilibrium constant for the overall reaction is equal to the product of the equilibrium constants of the individual reactions.

In this case, we can see that the overall reaction for K3 can be expressed as the sum of reactions 1 and 2, with the H₃O⁺ and OH⁻ ions cancelling out. Therefore, the correct expression for K3 would be:

K3 = (HOCl)(OH⁻) / (OCI)(H₂O)

Using this expression, we can see that the answer is option C, K3 = K1/K2.

To know more about equilibrium constants, refer to the link below:

https://brainly.com/question/31321186#

#SPJ11

The conjugate acid of NH₃ is NH₄⁺, When ammonia accepts a proton (H+), it becomes NH₄⁺. In this reaction, NH₃ is the base and NH₄⁺ is the conjugate acid, because NH₄⁺ is formed by the addition of a proton to NH₃ .

Ammonia (NH₃) is a weak base because it can accept a proton (H+) to form its conjugate acid, ammonium ion (NH₄⁺). In this reaction, ammonia (NH₃) acts as a Bronsted-Lowry base by accepting a proton (H+) to form ammonium ion (NH₄⁺), which acts as a Bronsted-Lowry acid. The key concept to understand here is the relationship between a weak base and its conjugate acid. A weak base can accept a proton to form its conjugate acid, which is always one proton (H+) more than the original weak base.

Learn more about conjugate acids here.

https://brainly.com/question/31229565

#SPJ1

The best method to reduce IR drops through the electrolyte is by using galvanic anodes. IR drops refer to the potential drop that occurs within the electrolyte solution due to its resistance.

This drop can significantly affect the performance of the structure, leading to corrosion and reduced efficiency. Galvanic anodes work by generating an electrical current that counteracts the potential drop and prevents corrosion. The anodes are made of a metal with a more negative potential than the metal they are protecting, which results in the anode corroding instead of the structure. This type of protection is commonly used in cathodic protection systems, which are designed to mitigate the effects of corrosion. Other methods such as monthly checkups or changing reference electrodes frequently do not address the root cause of the IR drops and may not provide adequate protection. Therefore, galvanic anodes are the most effective solution for reducing IR drops through the electrolyte.

learn more about the electrolyte Refer: https://brainly.com/question/28699046

#SPJ11

The given statement " When ionic bonds form, they produce individual molecules, each of which consists of a fixed number of positive and negative ions" is false because  they produce a crystal lattice structure, in which each positive ion is surrounded by a fixed number of negative ions, and vice versa.

When ionic bonds form, they produce a crystal lattice structure, in which each positive ion is surrounded by a fixed number of negative ions, and vice versa.

The lattice structure extends indefinitely in all directions, forming a solid compound. Therefore, ionic compounds do not exist as discrete molecules with a fixed number of ions.

For such more question on molecules:

https://brainly.com/question/475709

#SPJ11

The fatty acid is most likely to be a solid at room temperature is CH₃(CH₂)₁₄COOH.

Fatty acids are composed of long hydrocarbon chains with a carboxyl group (-COOH) at one end. The physical properties of fatty acids, such as melting point and solubility, are determined by the length of the hydrocarbon chain and the degree of saturation (i.e., the number of double bonds) in the chain.

Saturated fatty acids, which have no double bonds in the hydrocarbon chain, tend to be solids at room temperature because their molecules can pack closely together, allowing for stronger intermolecular forces (such as van der Waals forces) to hold them in a solid state.

Of the given options, (d) CH₃(CH₂)₁₄COOH is a saturated fatty acid with a long, straight hydrocarbon chain consisting of 16 carbon atoms. Therefore, it is most likely to be a solid at room temperature.

Option (a) CH₃(CH2)₃=CH(CH2)₃COOH and (c) CH₃(CH₂)₄(CH=CHCH₂)₂(CH₂)6COOH both have double bonds in their hydrocarbon chains, which introduce kinks in the chain, preventing molecules from packing closely together, and thus are more likely to be liquids at room temperature.

Option (b) CH₃(CH₂)₃COOH is a short-chain fatty acid with only four carbon atoms in the hydrocarbon chain, and so it is more likely to be a liquid at room temperature.

Therefore, the correct answer is (d) CH₃(CH₂)₁₄COOH.

To know more about the fatty acid refer here :

https://brainly.com/question/30712004#

#SPJ11

The structural features that allow an alcohol to exhibit intermolecular hydrogen bonding are:

1. The presence of nonbonding electron pairs on the oxygen atom

2. A hydrogen atom bonded to a highly electronegative oxygen atom.

The polar bond between oxygen and carbon and the presence of hydrogen atoms bonded to carbon are not sufficient to allow intermolecular hydrogen bonding in alcohols.

An example of an intermolecular force known as hydrogen bonding is the attraction of an electronegative atom in one molecule to a hydrogen atom that is bound to a strongly electronegative atom, such as nitrogen, oxygen, or fluorine. Intermolecular hydrogen bonding can take place in alcohols between an oxygen atom's non-bonding electron pairs and the hydrogen atom connected to its electronegative neighbor.

Numerous physical and chemical characteristics of alcohols, including their high boiling temperatures, high viscosities, and water solubility, are caused by this sort of bonding. Intermolecular hydrogen bonding is not possible when there is a polar link between oxygen and carbon or when hydrogen atoms are bound to carbon because those atoms lack the electronegative oxygen or nitrogen needed for this type of bonding are absent.

To know more about the hydrogen bonding refer here :

https://brainly.com/question/10904296#

#SPJ11

The three sloped portions in the heating curve of an ice-water mixture that is slowly heated to 125°C represent phase changes. Option D is correct.

The heating curve of a substance typically shows changes in temperature as heat is added or removed, while the substance undergoes phase changes. Phase changes occur when a substance transitions from one state of matter to another, such as from solid to liquid (melting), from liquid to gas (vaporization), or from solid directly to gas (sublimation).

The sloped portions in the heating curve represent the phase changes where the substance is either gaining or losing heat without changing temperature. These phase changes are also known as latent heat or enthalpy changes, as they involve the absorption or release of heat energy without causing a change in temperature.

Hence, D. is the correct option.

To know more about heating curve here

https://brainly.com/question/10481356

#SPJ1

--The given question is incomplete, the complete question is

"The heating curve of an ice-water mixture that is slowly heated to 125°C contains three sloped and two level portions. What do the three sloped portions in the graph represent? Responses A) sublimation B) heating C) deposition D) phase changes."--

A galvanic anode that would NOT be used to provide CP to steel is:.D) Chromium is not commonly used as a galvanic anode for the cathodic protection (CP) of steel. Magnesium, aluminum, and zinc are commonly used galvanic anodes for the CP of steel.

A galvanic anode is a type of sacrificial anode that is used to protect metal structures from corrosion. It is made from a more active metal than the metal being protected, such as zinc, aluminum, or magnesium. When the anode is electrically connected to the metal being protected and immersed in an electrolyte, such as seawater, a galvanic cell is created. This results in the anode corroding instead of the protected metal. As the anode corrodes, it releases electrons that flow through the electrolyte to the metal being protected, preventing it from corroding. Galvanic anodes are commonly used in pipelines, ships, and offshore structures to prevent corrosion.

Galvanic anodes are commonly used as a form of cathodic protection (CP) to protect metallic structures from corrosion. The anode material is more reactive than the metal being protected, and when connected to the structure through a conductive medium, it corrodes preferentially to the protected metal, thereby providing CP.

Magnesium, aluminum, and zinc are all commonly used as galvanic anodes for CP because they are more reactive than steel and corrode preferentially to it. However, chromium is not typically used as a galvanic anode for CP because it is less reactive than steel and would not provide sufficient protection. Instead, chromium is often used as a passive protective coating on steel, as it forms a thin, stable oxide layer that helps to prevent corrosion.

Know more about the galvanic anode

https://brainly.com/question/31563784

#SPJ11

We can use Avogadro's number to convert the number of molecules to moles. Avogadro's number is 6.022 x 10^23 molecules per mole.

First, we need to determine how many moles of formic acid are represented by 4.01 x 10^25 molecules:

n = N / NA

where n is the number of moles, N is the number of molecules, and NA is Avogadro's number.

Substituting the given values, we get:

n = 4.01 x 10^25 / (6.022 x 10^23) = 66.6 moles

Therefore, the sample of formic acid contains 66.6 moles of formic acid.

The correct option is B. The correct sequence of reagents that will perform the desired transformation is 1)[tex]R_2NH,[/tex] (H+), ([tex]-H_20[/tex]) 2) 3) [tex]H_30[/tex]+ 2) [tex]H_30[/tex]*.

Transformation refers to the process of changing the chemical composition or structure of a substance. This change can occur through various chemical reactions, which involve the breaking and forming of chemical bonds between atoms. In biochemistry, chemical transformations are vital for the functioning of living organisms, as they are involved in metabolic pathways that break down nutrients and produce energy.

Chemical transformations are essential in many areas of chemistry, including organic synthesis, materials science, and biochemistry. In organic synthesis, for example, chemists use various reactions to transform simple starting materials into more complex molecules, which can be used as drugs, pesticides, or other useful compounds. In materials science, chemical transformations are used to create new materials with specific properties, such as strength, flexibility, or conductivity.

To learn more about Transformation visit here:

brainly.com/question/13801312

#SPJ4

The solution with a pH of 4.5 is acidic. pH is a measure of the concentration of hydrogen ions in a solution.

For more such question on pH

https://brainly.com/question/12609985

#SPJ11

The reaction which represents an acid-base reaction is HBr + KOH → KBr + H₂O. Option 3 is correct.

An acid-base reaction, also known as a chemical reaction or a neutralization reaction, is a type of chemical reaction that involves the transfer of protons (H⁺) between an acid and a base. Acids are the substances which can donate protons, while bases are substances that can accept protons.

In an acid-base reaction, the acid donates a proton (H⁺) to the base, forming water (H₂O) and a salt. The salt is typically formed by the cation of the base combining with the anion of the acid.

For example; HBr + KOH → KBr + H₂O

This chemical equation represents an acid-base reaction between hydrobromic acid (HBr) and potassium hydroxide (KOH). In this reaction, HBr donates a proton (H⁺) to KOH, which acts as a base and accepts the proton to form water (H₂O), while KBr is formed as a salt. This is a classic example of an acid-base reaction, where an acid and a base react to form a salt and water.

Hence, 3. is the correct option.

To know more about acid-base reaction here

https://brainly.com/question/15209937

#SPJ1

1) The sequence of addition of the ether solution in the formation of the Grignard reagent is designed to minimize the occurrence of coupling reactions.

2) The two kinds of carbonyl acceptor structures that can be used in addition to benzoate esters to afford triphenylmethanol are aldehydes and ketones.

1) As mentioned in the question, coupling is an unavoidable side reaction that lowers the yield of Grignard reagents. The mechanism of the coupling process is not well understood, but it is known that the rate of coupling appears to depend on the square of the concentration of the halide. By adding the ether solution slowly to the alkyl halide, the concentration of the halide is kept low, thereby reducing the rate of coupling.

Additionally, adding the ether solution dropwise ensures that the reaction is well-controlled and does not become too exothermic. Overall, the sequence of addition of the ether solution is a practical way to minimize the impact of coupling on the yield of Grignard reagents.

2) Aldehydes react with one equivalent of the Grignard reagent to form a secondary alcohol, which can then react with another equivalent of the Grignard reagent to form triphenylmethanol. Ketones, on the other hand, react with two equivalents of the Grignard reagent to form a tertiary alcohol, which can also react with another equivalent of the Grignard reagent to form triphenylmethanol.

Therefore, the three structures - benzoate esters, aldehydes, and ketones - react with different numbers of equivalents of the Grignard reagent, resulting in the formation of triphenylmethanol.

To know more about Grignard reagents, refer to the link below:

https://brainly.com/question/31483303#

#SPJ11

The mass ooff magnesium is 0.0371 g, under the condition that to evolve 80 mL of H₂ at STP.
To calculate the mass of magnesium necessary to evolve 80 mL of H₂ at STP, we can use the equation
PV = nRT
Here
P = pressure,
V = volume,
n = number of moles,
R = gas constant,
T = temperature.
At STP, the pressure is 1 atm and the temperature is 273 K. Hence the volume of 80 mL can be converted to 0.08 L.
The number of moles of hydrogen gas produced can be evaluated as
n(H₂H₂2) = (PV) / (RT)
= (1 atm * 0.08 L) / ([tex]0.08206 L atm mol^{-1 }K^{-1} * 273 K[/tex])
= 0.00306 mol

Now, according to the balanced chemical equation for the reaction between magnesium and hydrochloric acid
Mg + 2HCl → MgCl₂ + H₂
One mole of magnesium reacts with two moles of hydrochloric acid to produce one mole of hydrogen gas. Then, we need half as many moles of magnesium as we have moles of hydrogen gas.
n(Mg) = n(H₂) /2
= 0.00306 mol / 2
= 0.00153 mol
The given molar mass of magnesium is approximately 24.31 g/mol.
Finally
mass(Mg) = n(Mg) * M(Mg)
= 0.00153 mol * 24.31 g/mol
≈ 0.0371 g

To learn more about mass
https://brainly.com/question/86444
#SPJ4

When distilling a peroxide-forming solvent, you should periodically test the distillate for peroxides and never distill the solvent pot to dryness. This ensures safety by monitoring peroxide levels and preventing potential hazards caused by high concentrations of peroxides.

When distilling a peroxide-forming solvent, it is important to periodically test the distillate for peroxides. Additionally, it is recommended to perform a low-pressure distillation with no heat and to never distill the solvent pot to dryness.

Distilling to dryness should only be done if you are certain an inhibitor is present.

This is because peroxide-forming solvents can produce dangerous peroxides when exposed to air or heat, so proper handling and disposal is crucial to prevent accidents.

Visit here to learn more about Solvents:

brainly.com/question/25326161

#SPJ11

Corrosion cells are a condition on a metal surface in which a flow of electric current occurs between the metal surface and an electrolyte with which it is in contact sufficient to cause the metal to degrade.

In a corrosion cell, electrons flow from the anode to the cathode through the metallic path. Therefore, the correct answer to the question is

B) anode to the cathode through the metallic path.

In the corrosion cell, metal ions formed from metal oxidation (cations) migrate from the anode to the cathode through the electrolyte. The electrons given off by this oxidation reaction move from the anode to the cathode through the electrical connection.

to know more about Corrosion cells click this link-

brainly.com/question/30800443

#SPJ11

Ni²⁺ is the only ion on the list that can exist as both a high-spin and a low-spin octahedral complex. So, the correct answer is B. Ni²⁺.

An electrostatic model called the crystal field theory (CFT) assumes that the metal-ligand connection is ionic and results only from electrostatic interactions between the metal ion and the ligand. When dealing with anions, ligands are viewed as point charges, and when dealing with neutral molecules, as dipoles.

The crystal field splitting theory predicts that some transition metal ions can exist as either high-spin or low-spin octahedral complexes, depending on the magnitude of the crystal field splitting parameter (Δ) relative to the pairing energy (P).

Of the ions listed, the only one that could exist as either a high-spin or a low-spin octahedral complex is Ni²⁺ (B).

Mn²⁺ (A) is a d⁵ ion and will always form a high-spin octahedral complex due to its large number of unpaired electrons.

Sc³⁺ (C) is a d⁰ ion and does not form octahedral complexes with ligands.

Cu²⁺ (D) is a d⁹ ion and typically forms a low-spin octahedral complex due to the stability of the half-filled d⁹ configuration.

Zn²⁺ (E) is a d¹⁰ ion and does not have any unpaired electrons to undergo spin pairing, so it will always form a low-spin octahedral complex.

Therefore, the correct answer is B) Ni²⁺.

Learn more about crystal field theory on:

https://brainly.com/question/23840749

#SPJ11

Calcium on reaction with water form calcium hydroxide which is sparingly soluble whereas the hydroxides of sodium and potassium are soluble in water.

Water reacts with calcium, magnesium, potassium, and sodium to form its hydroxide compounds. The amount of calcium hydroxide in water has changed.

Due to the compound's extremely poor solubility, calcium hydroxide appears opaque. In comparison to other oxides, calcium hydroxide has an extremely low Ksp (solubility product).

Magnesium, potassium, and sodium hydroxides are soluble in water. Therefore, these substances don't cause water to get hazy.

Because phenolphthalein is a basic substance, the solution turns pink when it is added. In a base, phenolphthalein has a pink colour; in an acid, it has no colour.

To know about calcium

https://brainly.com/question/9584549

#SPJ4

In molecular orbital theory, atomic orbitals from adjacent atoms can overlap to form bonding or antibonding molecular orbitals.

Here, we will examine the orientations of p and d orbitals that can result in these types of orbitals.      

When a p orbital (lobed shape) overlaps with a d orbital (cloverleaf shape), there are various ways they can align to form bonding and antibonding molecular orbitals. Bonding molecular orbitals result from constructive interference between the wave functions of the atomic orbitals, leading to increased electron density between the nuclei. Antibonding molecular orbitals, on the other hand, arise from destructive interference, creating a node or region of zero electron density between the nuclei.

1. Bonding orientation: A p orbital can overlap with a d orbital when their lobes are parallel and adjacent to each other, like px with dxz. The electron density accumulates between the nuclei, creating a bonding interaction.

2. Antibonding orientation: A p orbital can form an antibonding molecular orbital with a d orbital when their lobes are oriented in such a way that the positive phase of one orbital overlaps with the negative phase of the other, like px with dyz. This leads to destructive interference, and a node forms between the nuclei.

3. Non-bonding orientation: In some cases, there may be no significant overlap between the p and d orbitals, resulting in a non-bonding interaction. For example, a pz orbital may not interact significantly with a dxy orbital due to their orthogonal orientation.

To better visualize these interactions, it is helpful to draw diagrams showing the overlap of the orbitals and the resulting electron density distribution for bonding, antibonding, and non-bonding cases.

To know more about molecular orbital theory, refer to the link below:

https://brainly.com/question/29642622#

#SPJ11

When propane, C3H8, undergoes incomplete combustion in a limited amount of air, it does not have enough oxygen to fully react and produce carbon dioxide and water. Instead, it produces a mixture of carbon monoxide and water, making option A the correct answer.

Incomplete combustion occurs when there is not enough oxygen present to completely react with the fuel. This is a common occurrence in poorly ventilated areas, such as a home with a malfunctioning furnace or an improperly maintained gas stove. Propane is a common fuel used in homes for heating, cooking, and powering appliances, making it important to understand the potential hazards associated with incomplete combustion.Carbon monoxide, a colorless and odorless gas, is a dangerous byproduct of incomplete combustion that can be deadly if inhaled in high concentrations. It is important to have proper ventilation and carbon monoxide detectors installed in areas where propane is used to prevent the buildup of this toxic gas.In conclusion, when propane undergoes incomplete combustion in a limited amount of air, the most likely products formed are carbon monoxide and water, making option A the correct answer.

Learn more about propane here

https://brainly.com/question/23779346

#SPJ11

1) The charge on the metal is + 2

2) The valency of the element Q is 3

We know that the kind of cell that we dealing with here is electrochemical cell.

In this problem, I = 15A and t = 965s, so:

Q = 15A x 965s = 14475 C

Then;

The amount of substance produced n is given by:

n = Q / (F x z)

where F is the Faraday constant (96500 C/mol), and z is the valency of the ion.

In this problem, n = 0.05 moles, so:

0.05 = 14475 C / (96500 C/mol x z)

Solving for z, we get:

z = 3

Learn more about cell:https://brainly.com/question/20337942

#SPJ1

The process of passing electricity through a substance to separate molecules is called electrolysis. Option C is correct.

Electrolysis is a process in which an electric current is passed through a conducting medium (such as a liquid or a molten electrolyte) in order to bring about a chemical change. It involves the use of electrical energy to drive a non-spontaneous redox reaction, causing the decomposition or transformation of substances at the electrodes.

Electrolysis has a wide range of applications in various industries. For example, it is used in the extraction of metals from their ores, such as the production of aluminum from bauxite, or the extraction of copper from copper ores.

Electrolysis plays a crucial role in many technological advancements and industrial processes, making it an important area of study in the field of electrochemistry. It has widespread applications in fields such as metallurgy, chemical industry, energy production, and environmental remediation.

Hence, C. is the correct option.

To know more about Electrolysis here

https://brainly.com/question/12994141

#SPJ1

To generate a buffer solution with a pH above 7, the correct answer would be NH3 (ammonia) and its corresponding salt, NH4Cl. A buffer solution is a solution that can resist changes in pH when small amounts of an acid or a base are added to it.

Buffers are typically composed of a weak acid and its corresponding conjugate base, or a weak base and its corresponding conjugate acid.
In the case of NH3, it acts as a weak base and can be used to generate a buffer solution with a pH above 7. When NH3 is added to water, it reacts with water to form ammonium ions (NH4+) and hydroxide ions (OH-):
NH3 + H2O → NH4+ + OH-
The ammonium ion acts as a weak acid, while the hydroxide ion acts as a strong base. By adding NH4Cl to the solution, we can ensure that the concentration of ammonium ions remains high, and the pH of the solution remains above 7.
In contrast, HCN (hydrogen cyanide) and KOH (potassium hydroxide) would not be suitable for generating a buffer solution with a pH above 7. HCN is a weak acid, and its corresponding salt (such as NaCN) would generate a buffer solution with a pH below 7. KOH is a strong base, and its corresponding salt (such as KCl) would not be able to generate a buffer solution at all.

To learn more about buffer solution, refer:-

https://brainly.com/question/24262133

#SPJ11

The correct form of the zero-order integrated rate law for one reactant is: c. 1[A]t - 1[A]0 = kt

Here, [A]t represents the concentration of the reactant at time t, [A]0 is the initial concentration of the reactant, and k is the rate constant.

the correct form of the zero-order integrated rate law for one reactant is [A] = -kt + [A0], where [A] is the concentration of the reactant, k is the rate constant, and [A0] is the initial concentration12. This equation describes a linear plot of [A] versus t, with a slope of -k and a y-intercept of [A0]1.

Therefore, out of the options given, only option a. ln[A]t - ln[A]0 = kt is correct. Option b. ln[A]0[A]t = kt and option c. 1[A]t - 1[A]0 = kt are incorrect forms of the zero-order integrated rate law.

to learn more about integrated rate law click here:

brainly.com/question/30379408

#SPJ11