Please answer all questions provided in the picture.

Answer: Saw

Explanation:

Pretty obvious

Answer:

Which tool likely made these marks?

O hammer

O file

O screwdriver

Explanation:

You're welcome.

In a single covalent bond, two total electrons are shared.

Two total electrons are shared by one covalent bond. One pair of electrons are shared by two atoms in a single covalent connection.

In order to create a stable electron configuration for both atoms, each atom contributes one electron to create a shared pair.

A single covalent bond involves the sharing of one pair of electrons between two atoms.

Common examples of this kind of link between two nonmetals include the bond between the two hydrogen atoms in a molecule of H2 or the bond between the carbon and oxygen atoms in a molecule of CO.

For such more question on electrons:

https://brainly.com/question/371590

#SPJ11

True. A carbocation (CH3C+O) and an aluminium tetrachloride anion (AlCl4-) are produced as a result of the interaction between acetyl chloride (CH3COCl) and aluminium chloride (AlCl3).

The aluminium chloride serves as a Lewis acid catalyst in the reaction, which follows a Friedel-Crafts acylation mechanism. An acylium ion (CH3CO+) and an AlCl4- anion are created when the acetyl chloride interacts with the aluminium chloride. The carbocation (CH3C+O) is then created by a rearrangement of the acylium ion. By serving as a counter ion, the AlCl4- anion stabilises the carbocation. As a result, the chemical equation provided is accurate. True. A carbocation and an aluminium tetrachloride anion are created in this Friedel-Crafts acylation reaction between acetyl chloride and aluminium chloride.

learn more about aluminium here:

https://brainly.com/question/25869623

#SPJ11

The reduction reaction that occurs in an electrochemical reaction involves the gain of electrons and occurs at the cathode. Therefore, the correct answer is option D, II and IV only.

The reduction reaction in an electrochemical reaction involves the gain of electrons, which means that option IV is correct. The reduction reaction occurs at the cathode, where the positively charged ions are attracted to the negatively charged electrode and gain electrons. At the same time, oxidation occurs at the anode, where the negatively charged ions are attracted to the positively charged electrode and lose electrons. Therefore, option II is also correct. Options I and III are incorrect because reduction does not occur at the anode and it involves the gain, not the loss of electrons.

Learn More about  electrochemical reaction here :-

https://brainly.com/question/31606417

#SPJ11

Alcohol and carboxylic acid combinations to make each of the given esters based on their structural formulae.

Ester with benzene ring attached to carbonyl carbon and a four carbon chain attached to the singly-bonded oxygen:

The necessary alcohol and carboxylic acid combinations to make this ester are:

Alcohol: 2-phenylethanol ([tex]C_8H_{10}O[/tex])

Carboxylic acid: 3-phenylpropionic acid [tex](C_8H_{10}O_2)[/tex]

Ester with a two carbon chain containing the carbonyl carbon and a phenyl ring attached to the singly-bonded oxygen:

The necessary alcohol and carboxylic acid combinations to make this ester are:

Alcohol: 2-phenylethanol ([tex]C_8H_{10}O[/tex])

Carboxylic acid: 3-phenylpropionic acid [tex](C_8H_{10}O_2)[/tex]

Ester with a three carbon chain containing the carbonyl and a two carbon chain attached to the singly-bonded oxygen:

The necessary alcohol and carboxylic acid combinations to make this ester are:

Alcohol: 2-phenylethanol ([tex]C_8H_{10}O[/tex])

Carboxylic acid: 3-phenylpropionic acid [tex](C_8H_{10}O_2)[/tex]

Ester with a four carbon chain containing the carbonyl carbon and a one carbon chain attached to the singly-bonded oxygen:

The necessary alcohol and carboxylic acid combinations to make this ester are:

Alcohol: 2-methyl-2-phenylethanol ([tex]C_8H_{10}O[/tex])

Carboxylic acid: 3-methyl-3-phenylpropionic acid [tex](C_8H_{10}O_2)[/tex]

Learn more about carboxylic acid Visit: brainly.com/question/26855500

#SPJ4

Sodium and potassium have a lot in common chemically because they belong to the same group in the periodic chart.

Each have a single valence electron, which they commonly lose in chemical processes to create a positive charge. They both therefore generate molecules with comparable characteristics, such as salts that are soluble in water.

There are differences between sodium and potassium. Potassium is more reactive than sodium and has a higher potential for spontaneous air fires. Furthermore, it dissolves in water more readily than sodium.

Learn more about sodium:https://brainly.com/question/29327783

#SPJ1

One mole of CaCl₂contains 2 moles of chloride ions.

Calcium chloride (CaCl₂) is a salt that consists of one calcium ion (Ca2+) and two chloride ions (Cl-). Therefore, one mole of CaCl₂ contains two moles of chloride ions (2 Cl-).

To calculate the number of moles of Cl- in one mole of CaCl₂, we can use the formula:

moles of Cl- = 2 x moles of CaCl₂

Since one mole of CaCl₂ contains 1 mol of calcium ion and 2 moles of chloride ions, the total number of moles in one mole of CaCl₂is:

1 + 2 = 3 moles

So, the number of moles of Cl- in one mole of CaCl₂ is:

moles of Cl- = 2 x moles of CaCl₂ = 2 x 1 = 2 moles

Therefore, one mole ofCaCl₂ contains 2 moles of chloride ions.

Learn more about chloride ions.

https://brainly.com/question/31606403

#SPJ4

This type of feedback is known as a positive feedback loop. In this case, an initial increase in atmospheric CO2 concentrations leads to a rise in temperatures, which causes a decrease in CO2 solubility in the oceans. As a result, more CO2 is released from the oceans into the atmosphere, further strengthening the greenhouse effect and leading to even higher temperatures. The process amplifies the initial effect, which is characteristic of a positive feedback loop.

Among the compounds water, 1-butyne, 2-butyne, and ethane, the compounds that are stronger acids than ammonia are water and 1-butyne. This is because water can act as both an acid and a base, while 1-butyne, with its acidic terminal alkyne hydrogen, can donate a proton more readily than ammonia.

Ethane and 2-butyne are not acidic and cannot act as acids. In water, the hydrogen ion (H⁺) is readily released, making it a stronger acid than ammonia. Similarly, 1-butyne has a terminal alkyne group that can release a proton (H⁺) and is therefore a stronger acid than ammonia.

Learn more about stronger acids at https://brainly.com/question/24586675

#SPJ11

Water molecules surround solute molecules. Option B

The principle of "like dissolves like" states that non-polar chemicals are soluble in non-polar solvents and polar compounds are soluble in polar solvents.

Water can only dissolve other polar solutes since it is a polar solvent; it cannot dissolve non-polar solutes.

The polar molecules that surround the polar solutes when they are dissolved in water are separated when they do so because of the high dielectric constant of water.

Learn more about water solvation:https://brainly.com/question/1118783

#SPJ1

Missing parts;

Which statement accurately describes part of the dissolving process of a polar solute in water?

Solute molecules repel water molecules.

Water molecules surround solute molecules.

Water molecules are strongly attracted to nonpolar substances.

Solute molecules remain concentrated in one part of the solvent.

The loss of activity observed in aldolase when it is incubated with iodoacetic acid before fructose-1,6-bisphosphate is added is due to the chemical modification of a key amino acid residue within the enzyme's active site.

iodoacetic acid is a potent alkylating agent that modifies the thiol group of cysteine residues, thereby inhibiting their activity. In aldolase, the specific cysteine residue that is modified by iodoacetic acid is essential for the enzyme's function, as it participates in the formation of the Schiff base intermediate during the catalytic cycle. Thus, the modification of this residue prevents aldolase from binding and catalyzing the cleavage of fructose-1,6-bisphosphate, resulting in the observed loss of activity.

For more information on Schiff base see:

https://brainly.com/question/30692092

#SPJ11

Vertical sashes in a fume hood are an important safety feature that help to contain hazardous materials and protect the user. Typically, these sashes should be closed at all times except when certain circumstances arise. For instance, they may need to be opened to measure the airflow of a hood.

Which is essential for ensuring proper ventilation and preventing dangerous buildup of fumes or vapors. Similarly, if there is a need to access equipment inside the hood, the sashes may be opened temporarily. In some cases, if there is a chemical reaction occurring inside the hood, the sashes may need to be opened slightly to allow for proper ventilation. Finally, if there is an expectation of an explosion, the Vertical sashes should be opened to minimize the risk of injury. In general, it is important to follow proper safety procedures and guidelines when working with fume hood to ensure the safety of both the user and the surrounding environment.

learn more about  fume hood Refer: https://brainly.com/question/29582094

#SPJ11

The hydrogen sulfite or bisulfite ion (HSO3-) can act as an acid or a base in water, depending on the solution's pH. When HSO3- is in an acidic solution, it can act as a base and accept a proton to form the sulfurous acid (H2SO3):
HSO3- + H3O+ → H2SO3 + H2O

In this reaction, the HSO3- ion accepts a proton (H+) from the hydronium ion (H3O+) to form the sulfurous acid (H2SO3). The reaction's forward direction can be driven by increasing the acidity of the solution or by adding more H3O+ ions.On the other hand, when HSO3- is in a basic solution, it can act as an acid and donate a proton to form the sulfite ion (SO32-):HSO3- + OH- → SO32- + H2O.In this reaction, the HSO3- ion donates a proton (H+) to the hydroxide ion (OH-) to form the sulfite ion (SO32-). The reaction's forward direction can be driven by increasing the solution's basicity or by adding more OH- ions.It is important to note that HSO3- is a weak acid, and its hydrolysis reaction can be influenced by various factors such as temperature, pressure, and the presence of other ions in the solution. Additionally, HSO3- is a sulfite ion that is commonly found in food and beverage products as a preservative. People who are sensitive to sulfites may experience allergic reactions after consuming foods or drinks that contain them.

Learn more about hydrogen here

https://brainly.com/question/24433860

#SPJ11

In order of increasing orbital energy, this configuration can be expressed in condensed form as follows:

[Ne]3s²3p²

The electron configuration of sulfur is 1s²2s²2p⁶3s²3p⁴.

To express this configuration in condensed form in order of increasing orbital energy, we can group the electrons by the principal energy level (n) and list them in order of increasing sublevel (s, p, d, f):

[Ne]3s²3p²

Here, [Ne] represents the electron configuration of the noble gas neon, whose completely filled 2s and 2p subshells are included in the core electrons of the sulfur atom. The valence electrons of sulfur are located in the 3s and 3p subshells, which have higher energy levels than the core electrons.

Learn more about electronic configuration on:

https://brainly.com/question/17066934

#SPJ11

Answer: The answer is b activation have a great day

Explanation:

b) Activation energy is the minimum amount of energy that colliding molecules must possess in order to undergo a chemical reaction.

Without this minimum energy, the chemical reaction cannot proceed, and the molecules will simply bounce off each other. The S.I. unit of activation energy is joules (J) or kilojoules per mole(KJ/mol) .There are two factors on which activation energy depends and the factors are the nature of reactants and the effect of the catalysts. There are two types of catalysts : positive catalyst decreases the activation energy and the negative catalyst increases the activation energy. The correct answer is b) activation energy.

Learn more about activation energy : https://brainly.com/question/5280701

#SPJ11

The mass of carbon dioxide that should be produced in the reaction is equals to 44.01 g. The maximum Percent yield is 25.8%.

We have a molecule of carbon dioxide. In a reaction between carbon and excess oxygen to form a molecule of carbon dioxide. The reaction [tex]C + O_2 →CO_2[/tex]

Mass of carbon use in reaction =3.74 g

Mass of carbon dioxide that recover

=11.34 g

We have to determine the mass of carbon dioxide. Molar mass of Carbon dioxide= 44.01 g/mol

From the reaction, the one mole of carbon and one mole of oxygen reacts and form one mole of carbon dioxide molecule.

Mass of carbon dioxide = molar mass of carbon dioxide × moles of carbon dioxide

= 44.01 g/mol × 1 mole

= 44.01 g

Now, the maximum recent yield = [tex]\frac{ 11.34}{44.01} [/tex]

= 0.258

Percentage of yield = 25.8%. Hence, required value is 25.8%.

For more information about percent yield, visit:

https://brainly.com/question/14714924

#SPJ4

Approximately 30.9 moles of KClO3 are needed to produce 1039 L of O2 according to the given equation. To determine how many moles of KClO3 are needed to produce 1039 L of O2 according to the equation 2KClO3 → 2KCl(s) + 3O2(g), follow these steps:

Step:1. Determine the stoichiometric ratio between KClO3 and O2 from the balanced equation. In this case, it is 2 moles of KClO3 producing 3 moles of O2.
Step:2. Convert the given volume of O2 (1039 L) to moles using the ideal gas law. Assume standard temperature and pressure (STP) conditions, where 1 mole of any gas occupies 22.4 L.
Moles of O2 = 1039 L / 22.4 L/mol = 46.4 moles (approximately)
Step:3. Using the stoichiometric ratio, calculate the moles of KClO3 needed to produce 46.4 moles of O2.
(2 moles KClO3 / 3 moles O2) x 46.4 moles O2 = 30.9 moles of KClO3 (approximately)

Learn more about KClO3 here, https://brainly.com/question/30662282

#SPJ11

The Galvanic Series, the most active element is the one that is most likely to corrode or oxidize when in contact with other elements. In this case, D) Magnesium the Galvanic Series is a list of metals and alloys arranged according to their relative corrosion potentials in a given environment.

This series helps in predicting the corrosion behavior of a metal when in contact with another metal. The elements towards the top of the series are more active, meaning they have a higher tendency to corrode. Here's a brief explanation of the terms you mentioned Galvanic This term refers to the generation of electrical energy from a chemical reaction between two different metals or metal alloys. In the context of the Galvanic Series, it refers to the potential difference that drives the corrosion process. Element An element is a substance made up of atoms with the same atomic number, or the same number of protons in the nucleus. Elements are the fundamental building blocks of matter and cannot be broken down into simpler substances through ordinary chemical processes. In conclusion, magnesium is the most active element in the Galvanic Series and has the highest tendency to corrode when in contact with other elements.

learn more about Magnesium here.

https://brainly.com/question/1533548

#SPJ11

The tetrahedral intermediate in the acid-catalyzed Fischer esterification reaction of acetic acid and ethanol is formed when the carbonyl carbon of acetic acid undergoes nucleophilic attack by the oxygen of ethanol.

This intermediate then undergoes a dehydration reaction to form the ester product.

Aldehydes and ketones undergo a lot of nucleophilic addition reactions that are catalysed by an acid or base. Acids promote the production of a protonated carbonyl group, which catalyses hydration.

it is more vulnerable to an assault by a nucleophile. As a result, an intermediate hemiacetal is created, which can later be protonated and attacked by a different nucleophile to create a completely substituted acetal. In general, acid catalysis increases the carbonyl group's reactivity in nucleophilic addition processes.

Acids catalyse the hydration of carbonyl oxygen by protonating it, which increases its electrophilicity and susceptibility to nucleophilic attack. As a result, a tetrahedral intermediate is created, which subsequently proceeds through proton transfer to create the final hydrated product.

Learn more about reaction here

https://brainly.com/question/31545166

#SPJ11

The rate of formation of [tex]H_{2}[/tex] is 0.45 min⁻¹

The balanced chemical equation is:

2 [tex]NH_{3}[/tex]→ [tex]N_{2}[/tex] + 3[tex]H_{2}[/tex]

From the equation, we can see that for every 2 moles of [tex]NH_{3}[/tex] consumed, 3 moles of H2 are formed. Therefore, the ratio of the rate of formation of [tex]H_{2}[/tex]to the rate of consumption of [tex]NH_{3}[/tex] is 3/2.

Given that [tex]NH_{3}[/tex] is being consumed at a rate of 0.30 min⁻¹, the rate of formation of [tex]H_{2}[/tex] can be calculated as follows:

Rate of formation of [tex]H_{2}[/tex] = (3/2) × Rate of consumption of [tex]NH_{3}[/tex]

Rate of formation of [tex]H_{2}[/tex] = (3/2) × 0.30 min⁻¹

Rate of formation of [tex]H_{2}[/tex] = 0.45 min⁻¹

Therefore, the rate of formation of [tex]H_{2}[/tex] is 0.45 min⁻¹

Learn more about chemical equation,

https://brainly.com/question/30087623

#SPJ4

The statement that is true is that the number of hybrid atomic orbitals made equals the number of standard atomic orbitals used. Hybridization is a process that involves the combination of atomic orbitals to form new hybrid orbitals. The number of hybrid orbitals formed is equal to the number of standard atomic orbitals used in the hybridization process. This is because the new hybrid orbitals are a combination of the original orbitals.

For example, in sp hybridization, one s orbital and one p orbital combine to form two sp hybrid orbitals. In this case, two standard atomic orbitals were used to form two hybrid orbitals. Similarly, in sp2 hybridization, one s orbital and two p orbitals combine to form three sp2 hybrid orbitals. In this case, three standard atomic orbitals were used to form three hybrid orbitals.
Therefore, it can be concluded that the number of standard atomic orbitals used in hybridization is directly related to the number of hybrid orbitals formed. This is an important concept in understanding the geometry and bonding of molecules, and is a fundamental concept in chemistry.

for more such questions on atomic orbitals

https://brainly.com/question/11457131

#SPJ11

A) NaBrO: [OH⁻] = pH = 2.63 × 10⁻³ M, 10.58

B) NaHS: [OH] = 4.07 × 10⁻⁴ M, pH = 13.39

C) Mixture of NaNO₂ and Ca(NO₂)₂: [OH⁻] = 1.59 × 10⁻¹³ M, pH = 10.80.

A) NaBrO is a salt of a weak acid (HBrO) and a strong base (NaOH), so it undergoes hydrolysis. Using the equilibrium constant expression for the hydrolysis reaction of BrO⁻:

BrO⁻(aq) + H₂O(l) ⇌ HBrO(aq) + OH⁻(aq)

Kb = [HBrO][OH⁻] ÷ [BrO⁻]

we can find Kb from the pKa of HBrO:

Kb = Kw/Ka = 1.0 × 10⁻¹⁴ ÷ 2.3 × 10⁻⁹ = 4.35 × 10⁻⁶

[HBrO] = [OH⁻] = √(Kb[BrO⁻]) = 2.63 × 10⁻³ M

pH = 14 - pOH = 10.58

B) NaHS is a salt of a weak acid (H₂S) and a strong base (NaOH), so it undergoes hydrolysis. Using the equilibrium constant expression for the hydrolysis reaction of HS-:

HS⁻(aq) + H₂O(l) ⇌ H₂S(aq) + OH⁻(aq)

Kb = [H₂S][OH⁻] ÷ [HS⁻]

we can find Kb from the pKa of H₂S:

Kb = Kw ÷ Ka = 1.0 × 10⁻¹⁴ ÷ 1.2 × 10⁻⁷ = 8.33 × 10⁻⁸

[OH⁻] = √(Kb[HS⁻]) = 4.07 × 10⁻⁴ M

pH = 14 - pOH = 13.39

C) NaNO₂ and Ca(NO₂)₂ do not undergo hydrolysis, so we can find the [OH⁻] and pH of the solution by assuming that the total concentration of NO₂⁻ is the sum of the concentrations of NaNO₂ and Ca(NO₂)₂.

[NO₂⁻] = [NaNO₂] + 2[Ca(NO₂)₂] = 0.13 M + 2(0.25 M) = 0.63 M

[OH⁻] = Kw/[H₃O⁺] = Kw ÷ [NO2-] = 1.0 × 10⁻¹⁴ ÷ 0.63 = 1.59 × 10⁻¹³ M

pH = 14 - pOH = 10.80

To learn more about pH follow the link:

https://brainly.com/question/15289741

#SPJ1

4.64 is the equilibrium pOH of a 1.0 M solution of formic acid (HCO2H) if Ka=1.8×10⁻⁴ .

A standard for determining the concentration of hydroxide ions in a solution is called pOH, or potential of hydroxide. It is employed to ascertain if a solution is acidic or alkaline. The hydroxide ion (OH -) concentration's negative logarithm, or pOH, is equivalent.

The ion of hydroxide (OH -) content is measured by pOH. It is a way to describe how alkaline a solution is. At 25 degrees Celsius, aqueous solutions with pOH values of 7 or less are neutral, whereas those with pOH values of 7 or more are acidic.

                                       HCOO⁻ + H₂O   ⇄   HCOOH + OH⁻

At t=0                              1.0                          -              -

At t =equilibrium           (1.0-x)                          x           x    

Ka=[ HCOOH][ OH-]/HCOO-

1.8×10⁻⁴ = X²/  (1.0-x)          

x=0.44×10⁻⁵  

pOH = -log[OH⁻] = -log(0.44×10⁻⁵) = 4.64

To know more about pOH, here:

https://brainly.com/question/17144456

#SPJ1

Answer:

The main process that happens during the alpha type of radioactivity decay is (d) an alpha particle combines with a small atom to make a larger one.

Explanation:

The main process that happens during the alpha type of radioactivity decay is (d) an alpha particle combines with a small atom to make a larger one.

During alpha decay, a nucleus emits an alpha particle, which consists of two protons and two neutrons. The emission of the alpha particle reduces the atomic number of the parent atom by 2 and the mass number by 4. Therefore, a new nucleus is formed, which has an atomic number that is 2 less and a mass number that is 4 less than the parent nucleus. This type of decay is commonly observed in heavy nuclei, such as uranium and plutonium.

The best method to determine the hydroxide ion concentration of an aqueous solution with legal ramifications would be to use titration with a standardised acid solution.

Titration with a strong acid and a reliable indicator, followed by careful calculations, is the best method to determine hydroxide ion concentration. This method provides high accuracy and precision, allowing you to confidently determine the hydroxide ion concentration in the aqueous solution.This method is highly accurate and provides precise results. It involves adding the acid solution to the solution of unknown hydroxide ion concentration until the equivalence point is reached, which is indicated by a color change in the solution. The amount of acid solution used can then be used to calculate the hydroxide ion concentration of the original solution with high accuracy and without reasonable doubt.

Learn more about hydroxide ion concentration : https://brainly.com/question/28145224

#SPJ11

When a slightly soluble salt dissolves in water, it dissociates into its constituent ions, resulting in an equilibrium reaction. The equilibrium constant for this reaction is known as the solubility product constant, Ksp.

For more such question on Ksp

https://brainly.com/question/29557204

#SPJ11

Here's a classification of the given processes into exothermic and endothermic categories:

(a) Combustion: Exothermic. Combustion releases heat as chemical bonds are broken and new ones are formed, usually accompanied by the release of energy.

(b) Freezing water: Exothermic. During freezing, water molecules lose energy and form a solid structure, releasing heat in the process.

(c) Melting ice: Endothermic. Melting ice requires the absorption of heat to break the bonds between water molecules in the solid state and convert them into a liquid state.

(d) Boiling water: Endothermic. Boiling water involves the absorption of heat to convert liquid water into water vapor.

(e) Condensing steam: Exothermic. During condensation, water vapor molecules release heat as they transition from the gaseous state to the liquid state.

(f) Burning paper: Exothermic. Burning paper is a form of combustion, where chemical reactions release heat as the paper is broken down.

To know more about the exothermic & endothermic refer here :

https://brainly.com/question/4345448#

#SPJ11

The flowchart for the experiment involving the structures of all reactants, reagents, and products can be a useful tool in understanding the chemical reactions that occur during the experiment.

A flowchart is a graphical representation of a process, typically used in the fields of science and engineering. For the experiment involving the structures of all reactants, reagents, and products, we can create a flowchart that illustrates the chemical reactions that occur during the experiment.

The experiment involves the following reactants and reagents:

1. Methanol (CH₃OH)
2. Hydrochloric acid (HCl)
3. Acetic anhydride (C₄H₆O₃)
4. Sulfuric acid (H₂SO₄)

The products of the experiment are:

1. Methyl acetate (CH₃COOCH₃)
2. Water (H₂O)
3. Acetic acid (CH₃COOH)
4. Hydrogen chloride gas (HCl)

To create the flowchart, we can start with the reactants and reagents and follow the chemical reactions that occur. First, methanol is mixed with hydrochloric acid and sulfuric acid, leading to the formation of methyl chloride and water.

Next, acetic anhydride is added to the mixture, which reacts with the methyl chloride to produce methyl acetate and hydrogen chloride gas.

Finally, the mixture is neutralized with sodium bicarbonate to form acetic acid and water.

To illustrate these reactions, we can hand-draw the chemical structures of the reactants, reagents, and products in the flowchart. By visually representing the chemical reactions, we can better understand the process and the products that are formed.

To know more about chemical reactions, refer to the link below:

https://brainly.com/question/29762834#

#SPJ11

True, An addition polymerization is a process in which monomers containing carbon-carbon double bonds (such as ethene) react with an initiator (such as a radical) to form a polymer with a long chain of repeating units.

In an addition polymerization, two monomers containing double or triple bonds react in the presence of an initiator, which helps initiate the reaction.

                                             The initiator can break the double or triple bonds, allowing the monomers to form new single bonds and create a polymer chain.

Learn more about addition polymerization

brainly.com/question/27354910

#SPJ11