PLEASE ANSWER ASAP!!!
The movement of tectonic plates in two different locations is shown below:

Two blocks labeled Location A and Location B are shown. The block labeled A has a vertical line in the middle. On the left of the line there is an arrow pointing down. On the right of the vertical line there is an arrow pointing up. At Location B the top layer of the block shows two horizontal arrows pointing towards each other. The portion of this block on the right is shown moving down.
Which statement is most likely true?

Subduction occurs in both locations.

The magnetic orientation of rocks may change in Location A and subduction occurs in Location B.

Subduction occurs in Location A and the magnetic orientation of rocks may change in Location B.

Answers

Answer 1

Answer: its a and b

Explanation:its very simple and the reason is bc yea

Answer 2

Answer:

B

Explanation:

The answer is B because it said subduction i guess. And I got it right! Hope this helps to anyone that is looking at this!


Related Questions

Ana was setting up a circuit to make a buzzer buzz. She didn’t have any wires, so she needed to find
something that had the same properties as wires. Which of the following would work for Ana’s circuit?
A. A steel knife
B. A wood chopstick
C. A plastic straw
D. A glass tube

Answers

Answer:

should be a or d, though im leaning towards d more. sadly can't narrow it down 100%. b nor c are correct since they are made out of wood and plastic which cannot allow electricity to pass by. copper and metal are effective conductors of electricity, which a steel knife and a glass tube is made out of.

One mole of what substance contains a total of 6.02x10^23

Answers

Answer:

oxygen

Explanation:

One mole of atoms of oxygen has a mass of 16 g, as 16 is the atomic weight of oxygen, and contains 6.02 X 1023 atoms of oxygen.

plsss anwer my questions in the picture​

Answers

Answer:

17) b

18) c

19) c

20) c

21) b

22) D

23) b

24) b

25) a

26)?

27) D

28) b

29) D

30) c

balanced equation for the reaction between gallium and nitric acid. any spammers will be reported only correct answers ​

Answers

Answer:

Ga + 6HNO3 → Ga(NO3)3 + 3NO2 + 3H2O

Explanation:

Gallium has an ionic charge of 3+, so three nitrate ions are needed to balance it out.

Which is the correct name for the covalent compound that
contains five oxygen atoms and two phosphorus atoms?
a Diphosphorus pentoxide
b Pentaoxygen diphosphide
C Phosphorus oxide
d Pentaoxygen diphosphorus

Answers

The correct name for the covalent compound that  contains five oxygen atoms and two phosphorus atoms is Diphosphorus pentoxide.

The covalent compound has a combination of phosphorus and oxygen.

The oxygen atoms is 5 and the phosphorus atoms is 2.

Therefore, the combination can be represented chemically as follows:

P₂O₅

The standard name for this compound is Diphosphorus pentoxide.

The prefix di simply means phosphorus is 2 atoms.

The pent indicates 5 atoms of oxygen.

learn more: https://brainly.com/question/18709103?referrer=searchResults

Which of the four is least like the other three? A)Platinum B)Ivory C)Silver D)Gold​

Answers

Answer:

B) Ivory

Explanation:

Ivory is a hard, white material from the tusks and teeth of animals, that consists mainly of dentine, one of the physical structures of teeth and tusks.

Platinum, Silver, and Gold are precious metals, meaning they are rare metallic chemical elements of high economic value, shiny, hard, strong with high melting points

Ivory is regarded as the least of the options. Ivory consists of dentine and

are usually found in the tusks and teeth of animals such as elephants. They

however don't have much value as the other metals in the options.

Precious metals  include the following:

PlatinumSilverGold

They are used for ornamental purposes. They are usually mined and refined

to produce a variety of objects.

Their use are however legal and they are expensive which makes the Ivory

the least out of the options provided.

Read more about Precious metals here https://brainly.com/question/1336406

Write a balanced chemical equation for the complete combustion of methanol, ethanol, propanol, butanol and paraffin wax(C25H52). This information will be needed for the experiment. Transfer the answer to the data sheets also. (10 pts)

Answers

Answer:

Explanation:

1. Methanol:

CH3OH + O2 ---> CO2 + 2H2O

2. Ethanol:

C2H5OH + 3O2  ---->  2CO2 + 3H2O

3. Propanol:

2C3H7OH +  9O2 ------> 6CO2 + 8H2O

4. Butanol

C4H9OH  + 6O2 ------->  4CO2 + 5H2O

5. Paraffin Wax:

C25H52 +  38O2 ----> 25CO2 + 26H2O

What kind of wave causes particles in rocks to move at right angles to the direction of the wave

Answers

Answer:

Secondary waves

A type of seismic body wave in which rock particles vibrate at right angles to the direction of wave travel. Secondary waves cause the rocks they pass through to change in shape.

A transverse wave is a wave in which particles of the medium vibrate at right angles, or perpendicular, to the direction that the wave travels.

Which best describes the energy change that takes place during deposition?
Heat energy released by the substance
Heat energy is maintained by the substance
Heat energy is slowly gained by the substance
Heat energy is quickly absorbed by the substance

Answers

Answer:

heat energy released by the substance

The energy change that takes place during deposition is that heat energy is released by the substance. This statement is true about deposition.

Deposition is a phase transition that occurs when a gas is converted directly to a solid without passing through the liquid state. During deposition, energy is released by the gas particles and absorbed by the surface, resulting in a decrease in the energy of the gas particles and an increase in the energy of the surface particles.As a result, the substance releases heat energy as it changes from a gas state to a solid state.

Therefore, the correct option is:Heat energy released by the substance.

Learn more about heat energy,here:

https://brainly.com/question/29210982

#SPJ5

physical and chemical changes occur in digestion. What is an example of an physical change in digestion
teeth chewing food
acid mixing with food
saliva mixing with food
enzymes mixing with food

Answers

Answer:

teeth chewing food

Explanation:

When teeth chews food it change its state from hard solid to fine substance that can be easily digested by the body i guess

*1. Which statement about the temperature of a phase changes in electrostatic forces holding the molecules is correct?

A. The temperatures of which a substance changes phases is dependent of the size of the molecules in the substance.

B. The strength of the forces between molecules in a substance depends on the number of filled electron shells.

C. The temperatures at which a substance changes phases indicate the relative strength of the forces between molecules in the substance.

D. The strength of the forces between molecules in a substance is the strongest at higher temperatures.





*2. Which list shows the phases of matter in order from strongest collective electrostatic forces to weakest collective electrostatic forces?

A. Gas, solid, liquid

B. Gas, liquid, solid

C. Liquid, solid gas

D. Solid, liquid, gas





*3. Which change happens when water boils?

A. The forces between water molecules become stronger, and the bonds between atoms in the water remain unchanged.

B. The forces between water molecules are unchanged, and the bonds between the atoms in a water break.

C. The force is between water molecules in the bonds between the atoms in the water molecules break.

D. The forces between water molecules break, and the bonds between the atoms in water are unchanged.





*4. A sample of calcium carbonate is cooled. Which change happens to the molecules of calcium carbonate in the sample?

A. The forces weaken, and the molecules move around.

B. The molecules break apart and then form stronger forces.

C. The forces strengthen, and the molecule structure becomes more rigid.

D. The molecules vibrate more and weaken the forces.





*5. The boiling point of acetone is lower than the boiling point of ethanol. Based on this information, which conclusion can be drawn about the two substances?

A. The intramolecular bonds in acetone are stronger than the intramolecular bonds in ethanol.

B. The intermolecular forces in ethanol are stronger than the intermolecular forces in acetone.

C. The intramolecular bonds in ethanol are stronger than the intramolecular bonds in acetone.

D. The intermolecular forces in acetone are stronger than the intermolecular forces in ethanol.

Answers

Answer:

see below

Explanation:

1. The temperatures at which a substance changes phases indicate the relative strength of the forces between molecules in the substance.

2. solid, liquid, gas

3. The forces between water molecules break, and the bonds between the atoms in water are unchanged.

4. The forces strengthen, and the molecule structure becomes more rigid.

5. The intermolecular forces in ethanol are stronger than the intermolecular forces in acetone.

The the degree of intermolecular interaction between molecules determines the magnitude of boiling point of the substance.

During phase change, a substance moves from one state of matter to another. The temperature at which a phase change occurs is determined by the strength of the forces between molecules in the substance. The relative magnitude of intermolecular forces between molecules in different states of matter is solids > liquids > gases.

During boiling, energy is imparted to the molecules of a liquid. When this occurs, the forces between water molecules break, and the bonds between the atoms in water are unchanged.

We must recall that the molecules of a substance are in constant random motion. The average kinetic energy of molecules is proportional to temperature. As a sample of  calcium carbonate is cooled, the forces between molecules strengthen, and the molecule structure becomes more rigid.

The magnitude of intermolecular interaction affects the boiling point of a liquid. The stronger the magnitude of intermolecular interaction,the higher the boiling point. As such, ethanol having hydrogen bonds between its molecules has a higher boiling point than acetone which only posses weaker dipole - dipole interactions.

Learn more: https://brainly.com/question/6284546


Zingerone, one of the flavor molecules in ginger,
contains only C, H, and O. Combustion of 10.0 g
of zingerone produces 24.91 g of CO2 and
6.522 g of H20. Determine the molar mass of the
compound if it is between 150.0 and 220.0 g/
mol. Provide an answer to four significant
figures.

Answers

The molecular formula of the compound is C12H15O3 hence the molar mass of the compound is 207 g/mol.

We need to obtain the number of moles of carbon, hydrogen and oxygen in the compound;

Carbon = 24.91 g/44g/mol × 1 mole of carbon = 0.566 moles

Mass of carbon =  0.566 moles × 12 g/mol = 6.792 g

Number of moles of hydrogen = 6.522 g/18 g/mol × 2 moles = 0.725 moles

Mass of hydrogen = 0.725 moles  × 1 g/mol = 0.725 g

Mass of oxygen = 10 - (6.792 g + 0.725 g) = 2.483 g

Number of moles of oxygen = 2.483 g/16 g/mol = 0.155 moles

Now we must divide through by the lowest number of moles;

C - 0.566/0.155   H - 0.725/0.155     O - 0.155/0.155

C - 4                    H - 5                        O - 1

The simplest formula is C4H5O Recall that the molar mass of the compound lies between 150.0 and 220.0 g/mol

4(12) + 5(1) + 16 = 69

Hence; n = 3 and the molecular formula of the compound is C12H15O3

The molar mass of the compound is; 12(12) + 15(1) + 3(16) = 207 g/mol

Learn more: https://brainly.com/question/15180604

The diagram shows the box for an element in the periodic table. Whats is the atomic mass of the element shown?

Answers

Explanation:

option C is correct!

hope this answer helps you dear!

[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪  {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]

The Correct choice is ~ C

Atomic mass of Sulfur (S) is 32.1 u

Ocean water Choose one: A. is less dense than freshwater. B. salinity decreases as seawater evaporates. C. contains dissolved salts, like halite and gypsum. D. has an average salinity of 35%.

Answers

Answer: the answer is C

Explanation:

Ocean water contains dissolved salts, like halite and gypsum. The correct option is C.

What is the ocean?

The ocean is the salty water that covers an area of 70.08% of the total surface. It is a large body of water that covers the entire earth. There are seven oceans present with different names, and they are connected with each other. The ocean is one of the traveling routes for traveling and exporting and import of products.

The average salinity of the ocean is 3.5%. It contains salts, halite, and gypsum-like minerals and substances.

Thus, the correct option is C. contains dissolved salts, like halite and gypsum.

Learn more about the ocean, it, here:

https://brainly.com/question/11803537

#SPJ2

help! giving brainliest

Answers

perdon no se es que es para que me dé ingreso

Under an O2(g) pressure of 1.00 atm, 28.31 mL of O2(g) dissolves in 1.00 L H2O at 25 °C. What will be the molarity of O2 in the saturated solution at 25 °C when the O2 pressure is 4.47 atm? Assume that the solution volume remains at 1.00 L.

Answers

In the first case, the molarity of oxygen gas is 0.0012 mol/L. In the second case, the molarity of oxygen gas is 0.0052 mol/L .

We have to obtain the number of moles of oxygen as follows;

P = 1.00 atm

V = 28.31 mL or 0.02831 L

n = ?

R = 0.082 atm LK-1mol-1

T = 25 °C + 273 = 298 K

n = PV/RT

n=  1.00 atm × 0.02831 L/ 0.082 atm LK-1mol-1 ×  298 K

n = 0.0012 moles

Molarity = Number of moles/Volume = 0.0012 moles/1.00 L =  0.0012 mol/L

For the second case;

P = 4.47 atm

V = 28.31 mL or 0.02831 L

n = ?

R =  0.082 atm LK-1mol-1

T = 25 °C + 273 = 298 K

n = PV/RT

n = 4.47 atm ×  0.02831 L/0.082 atm LK-1mol-1 × 298 K

n = 0.1265/24.436

n = 0.0052 moles

Molarity of oxygen = 0.0052 moles/1.00 L = 0.0052 mol/L

Learn more: https://brainly.com/question/2510654

Fruit juice when boiled taste sweeter than sucrose because ​

Answers

Answer :see explanation

Explanation:

the sweet carbohydrate in fruit is not sucrose , it is fructose.

and fructose tastes sweeter than sucrose

fructose and glucose minus water equals sucrose

and fructose is sweeter than glucose

methane the principal component of natural gas is used for heating the cooking the combustion process is

Answers

Answer:

CH4 + O2 = CO2 + 2H2O

Explanation:

carbon dioxide and water is given off

NEED ANSWER ASAP!!

A mining company is looking for ways to save money on the process they use to discover new mineral resources while also reducing the impact that the mining process has on the environment.

Which improved technology would
best achieve this goal?

O fracking
O drilling technology
O extraction technology
O geological Surveying

Answers

Answer:

extraction technology.....

How do the ecological pyramid shapes compare

Answers

Answer:

it allow us to compare the amount of energy passing through each tropical level over a period of time

why the back torn of camel is important?​

Answers

The back torn of Camel is important because it acts as a storage facility for

fats.

Camels are found in desert regions where there is scarcity of

Food  Water

This makes the food it eats to get stored at the back in the hump

region as fats so as to enable it survive long periods of unavailability of food.

The fats are gradually metabolized into nutrients which is used by the body

cells to ensure adequate energy availability and optimal survival.

Read more about Camels here https://brainly.com/question/24478294

what are aliphatic alcohols and what differentes it from other alcohols

Answers

Answer: Lipids are one of the important nutrients needed by the body to supply energy and essential fatty acids required by the organism. Solid alcohols are a class of steroids, which are steroids containing hydroxyl groups. Lipids is a general term for oils, fats and lipids. 2, the characteristics are different: fat consists of c, h, o three elements. Fats are triacylglycerides made up of glycerol and fatty acids.

What is heat of reaction? Tell me In a short description?

Answers

Answer:

The Heat of Reaction (also known and Enthalpy of Reaction) is the change in the enthalpy of a chemical reaction that occurs at a constant pressure. It is a thermodynamic unit of measurement useful for calculating the amount of energy per mole either released or produced in a reaction.

Why do some hockey players go flying when they are checked?​

Answers

Be a they are dramatic

You have 2.567 grams of water. What is the volume of water(use correct units)

Answers

Answer:

2.567 mL

Explanation:

If you need to design a technological solution to lack of water availability in a developing country, which of the following should you do before proposing a solution? invest the money to test your most promising design select the best of several possible designs build a model to test research scientific principles involved in water availability

Answers

Anwser:

Research scientific principles involved in water availability.

Explanation:

Before building or investment you always want to see and know what your up against and what the best way to help or solve is. Researching why there's a problem in water availability or/and the principals to water availability will help you see what the problem is with what's happening to and around the process and it's environment.

Pick the correct answer!
1. Why does the octet rule apply primarily to main-group elements, not to transition metals?
a. The octet rule states that main-group elements tend to react so that they attain a halogen electron configuration.
b. The octet rule states that transition metal-group elements tend to react so that they attain a noble gas electron configuration.
c. The octet rule states that main-group elements tend to react so that they attain a ionic electron configuration. d. The octet rule states that main-group elements tend to react so that they attain a noble gas electron configuration.​

Answers

Answer:

I think it would be b. The octet rule states that transition metal group elements tend to react so that they attain a noble gas electron configuration.

An aqueous solution of a vanadium chloride salt is electrolyzed by a current of 3.00 A passing through the solution for 60.0 min. If 5.70 g of vanadium is produced at the cathode during this time, what is the likely formula unit for the vanadium salt

Answers

From the information in the question, the formula unit of the salt is given as VCl.

The quantity of charge produced is obtained from;

Q = It

I = current (3 A), t = time (3600 s)

Q = 3 A × 3600 s

Q = 10800 C

Now we need to find the number of electrons transferred as follows;

51 g of Vanadium is deposited by 96500n C

5.70 g is deposited by 10800 C

5.70 × 96500n = 51 × 10800

n =  51 × 10800/5.70 × 96500

n = 1

The formula of the salt is VCl.

Learn more: https://brainly.com/question/2510654

Which bond is the strongest? A) H–Br C) H–F B) H–Cl D) H–I

Answers

The strongest bond is H-CI

What is the reaction between CCl4 and H2O? ​

Answers

Answer:

At temperatures > 400 °C, CCl4 reacts with H2O over a MgO catalyst to yield HCl and CO2.

Other Questions
Which features do most stratovolcanoes and cinder cone volcanoes have in common?. explain how to use a graph of the function f(x) to find f(3) I'll mark u as brainliest pls help with these 2 questions Solve. 1.3=x(13.2) What is the solution to the equation? Enter your answer in the box. In which sentence does the verb agree with the subject?A. Several of my friends lives in the neighborhood.B. One of the children laugh at all my jokes.C. Neither of the boys was thinking about the possibility of rain.D.Neither of the boys were planning on doing their homework. Write each number as a logarithm with base 3.The answers has to be in this form: log ..... 3A) 0B) -2C) 4Please answer. Correct answer gets BRAINLIEST ! Please don't ignore this. what type of ions carry the impulse across the synapse from one neuron to the next ? This question has two parts. First, answer Part A. Then, answer Part B.Part AFill in the blank question.Nick wants to purchase a pair of binoculars that is on sale for $155.75. The sales tax rate in his county is 6.5%.Calculate the amount of sales tax Nick will pay on the purchase. Round to the nearest cent if necessary.sales tax: $Part BFill in the blank question.How much will Nick pay in all for the pair of binoculars after sales tax is included? Round to the nearest cent if necessary.total cost: $ Gabby read 98 pages of a book then stopped. She later decided to continue the book and read 37 more pages every day.Let d represent the number of days since Gabby decided to continue the book and p represent the total number of pages of the book she had read. 3 out of 20 apples are bad what percentage are bad A motorboat moves across a lake at a constant speed. When it begins, it is 55 km from the shore. After 12 minutes, it is 19 km from the shore. Which function describes the motorboat's distance from the shore? A. y = 12x + 19 B. y = 3x + 55 C. y = 3x + 55 D. y = 12x + 55 why might congress prefer to exercise ""fire alarm"" oversight rather than ""police patrol"" oversight? The perimeter of rectangle is 100m. If the length is decreased by 2m and the breadth is increased by 3m, The area increases by 44m. Find the length and breadth of rectangle? Phillis wheatley is celebrated in american history as: When babies are born, manyof their bones are stillcartilage. As they grow, theseharden into bone.What do we call the processof forming and hardeningbone?A. digestionB. circulationC. ossification A proportional relationship is represented by the equation 2x=18y. If y=kx, where k is the constant of proportionality, then what is the value of k? A culture's expectation of masculine and feminine behaviors can be defined as _____________________. interpret anansi's attitude towards other animals What does the number 84 in the name krypton-84 represent?the atomic numberthe mass number 2. Build a MATLAB program to evaluate ln(x) between [1, 2] that guar- antees up to 10 correct decimal digits using Chebyshev interpolation. Evaluate your function on 100 points on the interval [1, 2] and calculate the absolute error fore each point using MATLABs log command as the exact solution. Plot your error profile. Does this agree with the expected level of accuracy?