PLEASE HELP ASAP, DUE TODAY. (Also, an explanation would be helpful, but you don’t have to give one)

The energy transfer in the form of light or heat is called radiant energy. Thus the flow of electric current can be called as radiant.

Radiation is a mod of energy transfer through vacuum and the electromagnetic radiations are such energy transfer from stars and space which hits the earth surface.

Sound is a mechanical wave only travels through a medium whereas electromagnetic waves does not need a medium to travel. Electromagnetic radiation is the combination of an electric field and magnetic field.

Hence, the flow of electric current by which the energy made available is called radiant.

To find more on radiations, refer here:

https://brainly.com/question/13934832

#SPJ1

P=183.65 atm is the pressure inside the tank for the given conditions.

How is the pressure calculated?

Given,

V=108 L

m=22700 gm

The formula is PV=nRT

moles= [tex]\frac{Mass}{Molar mass}[/tex]

∴moles of [tex]N_{2}[/tex] = [tex]\frac{22700}{28}[/tex]=810.78 moles.

R=0.082 [tex]\frac{L atm}{molK}[/tex]

T=27°C=300K

P=[tex]\frac{nRT}{V}[/tex]

[tex]P_{N_{2}[/tex]=[tex]\frac{810.71 X 0.0821 X 298}{108}[/tex]

P=183.65 atm

The ideal gas law (PV = nRT) connects the macroscopic characteristics of ideal gases. A gas is considered to be perfect if its particles (a) do not interact with one another and (b) occupy no space (have no volume).

PV = nRT

PV = nRT is the equation for an ideal gas. In this equation, P stands for the ideal gas's pressure, V for the ideal gas' volume, n for the total amount of the ideal gas expressed in moles, R for the universal gas constant, and T for temperature.

To know more about ideal gas equation, click here

https://brainly.com/question/27870704

#SPJ1

Viscosity of polystyrene is determined to know the size of polystyrene its compression, and molding capacity.

To obtain the perfect shape and size the configuration of polystyrene should be maintained under different conditions.

So, to deduce the confirmation of the polystyrene under viscosity determination  we can apply 2 methods;

1. By adding excess diluents to the polystyrene which reduces its viscosity.

2. By introducing or adding small linear chains by addition method to the molecular chains of polystyrene molecular structure to reduce chain entanglement.

Learn more about polystyrene here;

https://brainly.com/question/27017570

#SPJ4

Answer:

Exoplanets

Explanation:

Exoplanets are planets beyond our own solar system. Thousands have been discovered in the past two decades, mostly with NASA's Kepler Space Telescope.

The gas after the calculation has a molar mass of 39.95g/mol which is that of Argon. The elemental symbol of gas is Ar.

We know that 1 mol of gas has 22.4L of any gas at STP.

Given in the question is the density of the gas 1.78g/l at STP.

Hence the mass of 22.4 L of the elemental gas at STP is its molar mass.

Hence molar mass

=22.4 l/mol × 1.7824 g/L

= 39.925g/mol

These gases are called noble gases because they are majestic in nature, which means they dont react with anything in general.

To learn more about noble gases, and other chemical compounds,

https://brainly.com/question/11764545

#SPJ4

Due to same d-same shell, that's why first ionization energy of the transition elements .

Ionization energy, also called ionization potential, in chemistry and physics, the amount of energy required to remove an electron from an isolated atom or molecule.

Transition elements (also known as transition metals) are elements that have partially filled d orbitals. IUPAC defines transition elements as an element having a d subshell that is partially filled with electrons, or an element that has the ability to form stable cations with an incompletely filled d orbital.

In transition elements, the first ionization energy of the elements remain constant because of poor shielding in d-subshell. The electrons suffers repulsion due to which their ionic radii does not decrease on moving from left to right. That's why first ionization energy of the transition elements from Sc to Zn fairly constant until Zn.

Know more about ionization energy visit the link

https://brainly.com/question/20658080

#SPJ4

Answer:

30 degrees Celsius, is 86 Fahrenheit.

273 kelvin, is 31.73 Fahrenheit.

0 degrees Celsius, is 32 Fahrenheit.

Then 32 degrees Fahrenheit.

The correct answer choice is A. 30 degrees Celsius.

As we move across period 3 the number of delocalized electrons per metal atom increases and the radius of the elements decreases. This means the melting point increases.

What is melting point and boiling point ?

The temperature at which molecules in a solid can pass one another and transform into liquids is known as the melting point. On the other hand, liquids and gases are involved in the boiling point. Some molecules at the liquid's surface are escaping as the molecules move around.

The three metals' melting and boiling points rise as a result of the strengthening of their metallic connections. Each atom can contribute an increasing quantity of electrons to the delocalized "sea of electrons." As you get from sodium to magnesium to aluminum, the atoms also get smaller and have more protons.

To know about melting point and boiling point from the link

https://brainly.com/question/40140

#SPJ1

The pH of buffer solution obtained will be 7.05 by dissolving 29.029.0 g of kh2po4(s)kh2po4(s) and 44.044.0 g of na2hpo4(s)na2hpo4(s) in water and then diluting to 1.00 l.

This can be calculated using use Henderson - Hasselbalch equation:

PH = Pka + ㏒ [A/AH]

Molar mass of KH₂PO₄ =  136.0 g And Molar mass of Na₂HPO₄ =  142.0 g

No. of moles of H₂PO₄⁻ = No. of moles of KH₂PO₄ = (29..0 g) / (136.0 g/mol) = 0.213 mol

No. of moles of HPO₄²⁻ = No. of moles of Na₂HPO₄ = (44.0 g) / (142.0 g/mol) = 0.30 mol

In the solution, [HPO₄²⁻]/[H₂PO₄⁻] = 0.213/0.30

Henderson-Hasselbalch equation:

pH = pKₐ + log([HPO₄²⁻]/[H₂PO₄⁻])

pH = 7.21 + log(0.213/0.30)

pH = 7.05

To know more about, Henderson - Hasselbalch equation click here,

brainly.com/question/9324316

#SPJ4

The electron dot structure of diatomic nitrogen is N≡N.

The electron dot structure of the nitrogen molecule is attached

The atomic number = 7

Chemical symbol = N

Type of bond = Triple bond

Group = 5A

Total number of valance electrons = 5

Lewis structure:

Therefore the electron dot structure is N≡N.

To know more about the bond structure refer to the link given below:

https://brainly.com/question/13939420

#SPJ4

Silver is most likely the best conductor of heat according to the periodic table.

The most electrically conductive component is silver, taken after by copper and gold. Silver too has the most elevated warm conductivity of any component and the most noteworthy light reflectance.

The components can be classified as metals, nonmetals, or metalloids. The most electrically conductive component is silver, taken after by copper and gold. Silver too has the most elevated warm conductivity of any component and the most noteworthy light reflectance.

As to why silver is the most excellent conductor, the reply is that its electrons are more liberated to move than those of the other components.

This has got to do with its valence and gem structure. Most metals conduct power. Other components with tall electrical conductivity, are aluminum, zinc, nickel, press, and platinum. Brass and bronze are electrically conductive amalgams, instead of components.

Learn more about silver at

https://brainly.com/question/8071605

#SPJ4

According to the given statement 1.24 M was the concentration of the hcl solution.

One of the main tools for connecting, managing, and running networked enterprise applications in a failover clustering infrastructure is a hyper - converged architecture (HCI) solution (HCI). Organizations may virtualize data, servers, and networks thanks to technology.

The balanced reaction is 2 HCl + Na₂CO₃ ==> CO₂ + H₂O + 2 NaCl

This shows that each mole of CO₂ created results in

There are two moles of HCl needed. So, starting with the atomic weights of carbon and oxygen, let's determine how many moles of CO₂ were produced.

Atomic weight carbon = 12.0107

Atomic weight oxygen = 15.999

Molar mass CO₂

= 12.0107 + 2 * 15.999

= 44.0087 g/mol

Moles CO₂ = 15.1 g / 44.0087 g/mol = 0.388559535 moles

We know we needed twice as much HCl based on the balanced equation,

so 0.388559535 mol * 2 = 0.77711907 mol

Simply divide the amount of moles by the number of liters because molarity is defined as moles per liter,

so: 0.77711907  mol / 0.625 l = 1.24339051 mol/l

Since our data only has three significant figures, round it to three figures to get 1.24 m.

To know more about HCl solution visit:

https://brainly.com/question/3339706

#SPJ4

I would expect the dissolved oxygen levels from wаter entering а lаke to hаve lower thаn the lаke itself becаuse the steаm is аble to hаve wаrm wаter which cаn cаuse the lаke temperаture to be wаrm аlso. Hаving wаrm wаter meаns hаving less dissolved oxygen.

Dissolved oxygen (DO) is the аmount of oxygen thаt is present in wаter. Wаter bodies receive oxygen from the аtmosphere аnd from аquаtic plаnts. Running wаter, such аs thаt of а swift moving streаm, dissolves more oxygen thаn the still wаter of а pond or lаke. Heаlthy wаter should generаlly hаve dissolved oxygen concentrаtions аbove 6.5-8 mg/L аnd dissolved oxygen sаturаtion between аbout 80-120%.

For more information about dissolved oxygen refer to the link:

https://brainly.com/question/26113345

#SPJ4

A solid with a covalent network is silicon dioxide. Carbon dioxide is a covalent molecule, whereas magnesium oxide is an ionic substance.

It is a covalent molecule, carbon dioxide. Although the complex has polar C-O bonds, it is often nonpolar, therefore the molecules are only held together by modest dispersion forces.

Ionic solids include the substance magnesium oxide. It has a crystal lattice made up of magnesium ions and oxygen ions. The chemical is almost insoluble in water because of the significant lattice energy and small ion sizes.

Chains of silicon-oxygen bonds make up the covalent network solid known as silicon dioxide. The network solid has a high melting point and creates a very stiff structure.

Learn more about network solids:

brainly.com/question/8236583

The density of the material would be 1.75 gm/cc.

p = n'∑Ac + ∑AA/VcNA

= n'(∑Ac + ∑AA)/9³NA

=n'(∑Ac + ∑AA)/(2(rA + rX))³ NA

n' = number of atoms per unit cell

= 4(assumption)

rA = 0.137 × 10⁻⁷ cm

rX = 0.241 × 10⁻⁷ cm

NA = Avagadros number

= 6.022 × 10²³

∑Ac = Atomic weight of all cations

∑AA = Atomic weight of all anions

p = n'(∑Ac + ∑∑AA)/(2(rA + rx))³NA

= 4(22.7 + 91.4/(2(0.137 × 10⁻⁷ + 0.241 × 10⁻⁷))³ 6.022× 10²³

= 1.75 gm/cc

Know more about Ceramic Compounds at:

https://brainly.com/question/16928605.

#SPJ4

Explanation:

the answer was already on here

Acid and Bases interact in water as they form Hydronium ion and hydroxide ions. The interaction for strong acids and weak acids produces salts.

Acid are those which have ability to dissociates into H⁺ ions.  ans the bases are those which have ability to produce OH⁻ ions. when we mix acid with water it produce hydronium ions.

HCl   +   H₂O ----->   H₃O⁺   +   Cl⁻

when we mix base with water it produced hydroxide ions.

NaOH   +   H₂O    ------>   Na⁺     +   OH⁻

The mixture of two acids of different will react together. while when two acids mix the reaction do not happen. when we mix weak acid with the strong acid it produces salt because  weak acid have higher pH which is basic.

Thus, Acid and Bases interact in water as they form Hydronium ion and hydroxide ions. The interaction for strong acids and weak acids produces salts.

To learn more about acid and base here

https://brainly.com/question/23687757

#SPJ1

Answer:

Together, the number of protons and the number of neutrons determine an element’s mass number: mass number = protons + neutrons. If you want to calculate how many neutrons an atom has, you can simply subtract the number of protons, or atomic number, from the mass number. A property closely related to an atom’s mass number is its atomic mass.

Explanation:

Partition coefficient Chloroform = 11.98, Diethyl Ether = 2.81 and Benzene = 1.05      

Chloroform would be the ideal solvent to use when extracting the chemical from an aqueous solution because it has the highest solubility.

A solution is a homogenous mixture of one or even more solutes in a solvent. Adding sugar cubes to a cup of tea or coffee is an example of a solution. A property that facilitates the dissolution of sugar molecules is solubility. Solubility is the property of a substance (solute) to dissolve in a particular solvent. A solute is any solid, liquid, or gaseous substance that dissolves in a solvent.    

The compound needs 2 grams of solvent to dissolve it.

Finding solubility

For water, 2g/90ml= 2.22

For chloroform, 2g/7.50= 26.6

For diethyl ether, 2g/32= 6.25

For benzene, 2g/85= 2.35

Partition Coefficients -

For chloroform = 11.98

For Diethyl Ether = 2.81

For Benzene = 1.05

As a result of its high solubility, chloroform would be used to extract a compound from an aqueous solution.

Know more partition coefficients at:

https://brainly.com/question/16953107

#SPJ4

When a piece of I2 in 50 ml of water is placed then another piece of I2  of the same mass in C6H14 is placed then hydrogen bonding is formed in water and a strong London dispersion force occurs.

C6H14 is a straight chain alkane with 6 carbon atoms with no double or triple bond.this is non polar. So, London dispersion forces exist.this is the force that exists between all molecule.this is the weakest intermolecular forces.the boiling point of C6H14 increases as their atomic mass increases due to stronger London dispersion force.

Water has strong intermolecular forces.in this,hydrogen bonding and dipole moment created by the strong electronegative oxygen and hydrogen.water has hydrogen bond,dipole induced dipole forces and London dispersion forces.

To learn more about intermolecular forces please visit:

https://brainly.com/question/12243368

#SPJ4

It was discovered that the photosynthetic pigment in spinach best absorbed light between the wavelengths of 400 and 450 nm as well as at 650 nm. Additionally, it was discovered that this green phototroph barely absorbed light at wavelengths about 550 nm.

The logarithm of the ratio of incident to transmitted radiant power through a sample is known as absorbance. As an alternative, absorbance can be defined as "the negative logarithm of one minus absorptance, as measured on a homogeneous sample," for samples that scatter light.

The disks will rise as a result of bubbles developing on their surface when the leaves create oxygen. The leaves eventually sink if the cup's light source is taken away.

To know more about Absorbance please click here : https://brainly.com/question/14919298

#SPJ4

A platinum wire is dipped into a strontium nitrate solution. Then inserted into a burner flame, then the strontium atoms emit a characteristic red color. this is an example of how an element can be identified by its unique atomic emission spectrum.

The goal of an atom's electron arrangement is to keep the energy of the atom as low as feasible. An atom's ground state has the lowest energy level of all the atoms. When the energy is applied to those atoms, the electrons take it in and go to a higher energy level. The electrons in atoms have quantized energy levels, which again means that they must transition from one level to another in discrete increments rather than constantly. An atom is said to be in an excited state when its potential energy exceeds that of the ground state. An excited atom is not a stable atom.

To know more about atomic emission spectrum, visit:

https://brainly.com/question/13959991

#SPJ4

The standard entropy change for the combustion of 1 mole of diamond at room temperature is 6.22  J / K mol.

The reaction is given as :

C (diamond)  + O₂   ----->  CO₂

At room temperature the value of S°  is given as follows :

C = 2.38 J / K mol

O₂ = 205.2 J/Kmol

CO₂ = 213.8 J/Kmol

The  standard entropy change is given as :

ΔS° = ∑S° product  - ∑ S° reactant

ΔS° = ( 213.8 ) - ( 2.38 + 205.2)

ΔS° = 213.8 - 207.58

ΔS° = 6.22  J / K mol

Thus, The standard entropy change for the combustion of 1 mole of diamond at room temperature is 6.22  J / K mol.

To learn more about entropy change here

https://brainly.com/question/28380336

#SPJ4

Answer:

A planetary scientist who works at john hopskin university

Explanation:

The molarity of the acid is given, so the number of moles titrated can be calculated: 0.050 L × 6 mol/L = 0.3 moles of strong acid added thus ...

A strong acid-strong base titration is used to determine the concentration of an acidic solution by titrating it with a known concentration of a basic solution, or vice versa, until neutralisation occurs. Because both the acid and base are strong (high Ka and Kb values), they will fully dissociate, which means that all the molecules of acid or base will separate into ions. Equivalent amounts of H+ and OH- ions combine to form H2O at the equivalence point, resulting in a pH of 7.0. (neutral).

In aqueous solution, an acid that has been completely ionised. In contrast to a weak acid, when a strong acid is placed in a solution such as water, all of the strong acid dissociates into its ions. The general equation for strong acid dissociation is:

HA(aq)→H+(aq)+A−(aq)

The H stands for hydrogen, and the A stands for the acid's conjugate base (anion).

A base that is completely ionized in aqueous solution. This means when the strong base is placed in a solution such as water, all of the strong base will dissociate into its ions. The general equation of the dissociation of a strong base is:

XOH(aq)→X+(aq)+OH−(aq)

The OH represents hydroxide and the X represents the conjugate acid (cation) of the base.

To learn more about titration equation refer to:https://brainly.com/question/19556786

#SPJ4

The solution for addressing transportation concerns and reducing the amount of carbon dioxide released into the atmosphere might include promoting vehicles powered by renewable energy sources to harvest the crops and get them to market (Option B).

The expression renewable energy sources make reference to different types of energy that replace the use of fossil based fuels in order to avoid the increase in the carbon dioxide level.

Therefore, with this data, we can see that renewable energy sources such as wind energy or solar energy replace fossil based fuels.

Learn more about renewable energy sources here:

https://brainly.com/question/13203971

#SPJ1

Answer:

The answer is sophisticated earthquake early-warning systems, increasingly accurate storm forecasting, and innovative flood risk and flood mitigation projects provide communities with the tools they need to respond to impending hazard events, and infrastructure design and engineering improvements help to reduce the damage suffered

Explanation:

I hope this helps

Step 1: Begin with a balanced chemical equation and starting amounts for each reactant.

Step 2: Convert mass of each starting reactants to moles.

Step 3: Calculate the number of moles used for each reactant. is the limiting reagent.

what is limiting reaction?

to know more about limiting reaction follow

https://brainly.com/question/28320939

#SPJ4

T-butyl chloride changes its ppt formed  and color more quickly with ague and an indicator than other chlorides do.

The hydrant A color shift was caused by the addition of AgNO3 when a product like Hl reacted with the acid-base indicator MethyL red. The released chloride ion was found by Agel precipitation at ambient temperature. Both a color change in an indicator and a precipitate format positively confirmed that the reactivity order in both cases is t-butyl chloride > n-butyl chloride. As a result, t-butyl chloride changes its ppt formed  and color more quickly with ague and an indicator than other chlorides do.

learn more about chlorides here:

https://brainly.com/question/15296925

#SPJ4