Answer:
1. H₂SO₄ + Na₂CO₃ ⇒ Na₂SO₄ + H₂O + CO₂
sulfuric acid + sodium carbonate ⇒ sodium sulfate + water + carbon dioxide
2. 2 HCl + Mg(HCO₃)₂ ⇒ MgCl₂ + 2 H₂O + 2 CO₂
hydrochloric acid + magnesium hydrogencarbonate ⇒ magnesium chloride + water + carbon dioxide
Explanation:
1. Sulfuric acid is H₂SO₄. Sodium carbonate is Na₂CO₃.
H₂SO₄ + Na₂CO₃ ⇒ Na₂SO₄ + H₂O + CO₂
sulfuric acid + sodium carbonate ⇒ sodium sulfate + water + carbon dioxide
2. Hydrochloric acid is HCl. Magnesium hydrogencarbonate is Mg(HCO₃)₂.
2 HCl + Mg(HCO₃)₂ ⇒ MgCl₂ + 2 H₂O + 2 CO₂
hydrochloric acid + magnesium hydrogencarbonate ⇒ magnesium chloride + water + carbon dioxide
Balance Ca + HCI +CaCl2 + H2
Answer:
Ca + 2 HCl -- CaCl2 + H2
Explanation:
There are two hydrogen on the right side, so we multiply the left side( HCl) by 2 to get 2 hydrogen on the left. This automatically gives you 2 Cl on left side and there are already 2 cl on the right side, so now this equation is balanced.
what is the purpose of ash to soil conditioning.
Answer:
Question: what is the purpose of ash to soil conditioning?
answer: soil conditioner is a product that is added to soil to improve the soils physical qualities, it's usually the fertility of the soil and sometimes the mechanics of the soil. can be used to improve poor soils.
most wood ash contains a good percentage, about 25 percent, of calcium carbonate, which is an ingredient in garden lime. if your soil is highly acidic, with a pH of 5.5 or lower, amending with wood ash can raise the pH of your soil.
2. I need to find the angle of corner of a room, what tool could I use?
a. Combination square
b. Plumb-bob
c. Sliding t-bevel
d. Tri-square
g Hydrogen iodide, HI, decomposes at moderate temperatures according to the equation The amount of I2 in the reaction mixture can be determined from the intensity of the violet color of I2; the more intense the color, the more I2 in the reaction vessel. When 3.80 mol HI was placed in a 5.00-L vessel at a certain temperature, the equilibrium mixture was found to contain 0.443 mol I2. What is the value of Kc for the decomposition of HI at this temperature
Answer:
Equilibrium constant, Kc = 0.023
Explanation:
Equation for the decomposition of Hydrogen iodide is given below:
2HI ----> H₂ + I₂
Initially, the number of moles of the reactant and the products are given as follows:
n(HI) = 2 * 3.800 moles = 7.600 moles
nH₂) = 0.000 moles
n(I₂) = 0.000 moles
At equilibrium, the equation becomes: 2HI <----> H₂ + I₂
Number of moles of the reactant and the products are given as follows:
n(HI) = 7.600 - (0.886 + 0.886) moles = 5.828 moles
nH₂) = 2 * 0.443 = 0.886 moles
n(I₂) = 2 * 0.443 = 0.886 moles
Equilibrium constant, Kc = [H₂] [I₂] / [HI]²
Equilibrium constant, Kc = (0.886) * (0.886) / (5.828)²
Equilibrium constant, Kc = 0.023
How many moles are in 2.5L of 1.75 M Na2CO3
Answer: There are 4.375 moles in 2.5 L of 1.75 M [tex]Na_2CO_3[/tex]
Explanation:
To calculate the number of moles for given molarity, we use the equation:
[tex]\text{Molarity of the solution}=\frac{\text{Moles of solute}}{\text{Volume of solution (in L)}}[/tex]
Molarity of solution = 1.75 M
Volume of solution = 2.5 L
Putting values in equation , we get:
[tex]1.75M=\frac{\text{Moles of} Na_2CO_3}{2.5L}\\\\\text{Moles of }Na_2CO_3=1.75mol/L\times 2.5L=4.375mol[/tex]
In a single replacement reaction, the chloride ion in NaCl can be replaced
by
a. potassium
b. carbon
c.fluorine
d.neon
Answer:
c. fluorine
Explanation:
A single replacement reaction is defined as the chemical reaction in which a strong molecule replaces the weak molecule from a compound.
In a single replacement reaction, the chloride ion in NaCl can be replaced by fluorine and gives Sodium fluoride as fluorine (F) is stronger than chlorine (Cl) and from other given molecules also. So the single replacement reaction between NaCl and F will be:
NaCl + F2 => NaF + Cl2
Hence, the correct answer is "c. fluorine".
I need help with like 35 questions anyone willing to help please let me know I have discord
UnknownGoddxss#2795
Please I only have like 5 hours to complete this
Answer and Explanation:
The molar mass of a substance is all of the weights from the elements combined.
So, we have the elements
CU, S, and [tex]O_{4}[/tex]
CU has a mass is 65
S mass is 32
O has a mass of 16, but there's 4 atoms of O, so we do 16 times 4, which is 64.
Now we add.
65 + 32 + 64 is 161.
So, the answer is 160, or answer choice A.
#teamtrees #PAW (Plant And Water)
What is chemistry
What is the bond type in CaO
Answer:
Ionic bond
CaO is an ionic bond. Two-element compounds are usually ionic when one element is a metal and the other is a non-metal. It is made up of one metal ion/cation(Ca^2+) and an non-metal ion/anion(O^2-).
The subscript represents the number of ____________ in a chemical equation.
[Kr]5s24d25p1
Express your answer as a chemical symbol.
Answer:
kr(5)s24d25p1
=5d25kprs24
What unit of time is based on the revolution of Earth around the sun?
A. month
B. year
C. day
D. hour
find the sum of 15, 9, 3, ....... 45
Answer:
hope this helps
Explanation:
72
Name the functional group in the
following molecule:
HSCH2CH3
A. alkane
B. amide
C. thiol
D. alkyl halide
Answer:
C. thiol
Explanation:
Answer:
it's C thiol I just took the test
hope this helps
have a good day :)
Explanation:
Unknown compound Q is spotted on a TLC plate that is then developed in dichloromethane. The solvent front is measured at 5.2 cm and the distance traveled by compound Q is measured at 3.4 cm. A sample of aspirin is spotted on a TLC plate that is then developed in dichloromethane. The solvent front is measured at 4.15 cm and the distance traveled by aspirin is measured at 2.70 cm. What can be determined about the identity of compound Q in light of this data
Answer:
Follows are the solution to the given question:
Explanation:
The Rf value on the Q is =0.65
The Rf value in the acetaminophen is =0.651
In this question, its identity the Q is probably in the acetaminophen since the value which is used to calculates, and however almost the same, and it is used to ensure the other document which is the substances, that are evaluated.
Help plz now !
Which statement explains why a chemical equation must be balanced?
A. It must show the reactants and products on the correct sides of
the reaction arrow.
B. It must show that the mass of each element involved is conserved
by a chemical reaction.
C. It must show how each chemical formula is written to accurately
represent each substance.
D. It must show that coefficients and subscripts can be used in
chemical formulas.
Answer: B. It must show that the mass of each element involved is conserved by a chemical reaction.
Explanation:
According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side. Thus chemical equations are balanced.
The correct statement why a chemical equation must be balanced is It must show that the mass of each element involved is conserved by a chemical reaction.
Answer:
B. It must show that the mass of each element involved is conserved
by a chemical reaction.
Explanation:
a p e x, just took the quiz
A severe storm would be most likely to damage a coastal area by causing
A.
volcanoes.
B.
pollution.
C.
erosion.
D.
earthquakes.
A severe storm would be most likely to damage a coastal area by causing pollution. Therefore, the correct option is option B.
What is coastal area?The region where land joins the ocean, or even as a line defining the border between the land as well as the shoreline, is known as the coast, sometimes referred as the coastline and seashore. The terrain of the area's surroundings has an impact on shorelines, as do water-induced erosion processes like wave action.
The length of the shoreline on Earth is about 620,000 kilometers. Natural ecosystems' coasts are significant zones and frequently the site of a diverse range of biodiversity. They are home to significant ecosystems on land, such as freshwater and estuarine wetlands, that are crucial for the survival of bird populations or other land animals. A severe storm would be most likely to damage a coastal area by causing pollution.
Therefore, the correct option is option B.
To know more about coastal area, here:
https://brainly.com/question/14105067
#SPJ3
Which one of the following statements about the carbon phosphorus and nitrogen cycles is true ?
a. The major source of carbon used by plants is the soil
b. The major source of nitrogen used by plants is the air.
c. Phosphorus has no atmospheric component.
d. Bacteria drive the phosphorus cycle.
Answer: The correct option is C.
Phosphorus has no atmospheric component.
Explanation:
This is because, phosphorus is not in gaseous state but it is liquid at normal temperature, therefore it cannot be found in the air. It is cycle through water,soil or sediments. The major source of phosphorus in the phosphorus cycle is the rock. Rock contain phosphorus and phosphorus I'd gotten from rocks through weathering. Weathering is the disintegration of rocks into sediments or smaller particles. This is released into the soil after weathering.
How are humidity and precipitation related?
A. When humidity is low, the chance of precipitation is high.
B. When humidity is high, the chance of precipitation is high.
C. When humidity is high, the chance of precipitation is low.
D. Changes in humidity do not cause precipitation.
Draw the structure formula for
1-ethyl-2,3-dimethylbenzene
Please help me
Answer:
Please see the attached picture.
Explanation:
1) Draw a benzene ring
2) On the first carbon, add a CH₂CH₃ (known as ethyl) since its location number is 1.
3) 'Dimethyl' refers to 2 methyl (CH₃) branches. The location numbers are 2 and 3, thus add a CH₃ on the 2nd and 3rd carbons.
1. why do the elements within a group of the periodic table have similar chemical properties?
Answer:
the elements in a group have similar electron configurations, an elements electron configuration determines its chemical properties, therefore members of a group in the periodic table have similar chemical properties. ... These metals have a single valence electron and are extremely reactive.
Explanation:
Answer:
Because they all have one or more atoms of the same type material
Explanation:
Which change represents an oxidation reaction?
If I began this reaction with 1.7g of O2 , how much water would I make
Indicate which of these statements about catalysts are true. 1) In an equilibrium process, a catalyst increases the rate of the forward reaction, but leaves the rate of the reverse reaction unchanged. 2) A catalyst is not consumed in the course of a reaction. 3) A catalyst must be carefully chosen to shift the equilibrium toward products.
Answer:
2) A catalyst is not consumed in the course of a reaction.
Explanation:
A catalyst is a substance which increases the rate of chemical reaction and remains chemically unchanged at the end of the reaction. The addition of a catalyst increases the rate of both reversible and irreversible reactions. including reversible reactions involving a final equilibrium state. In reversible reactions, catalysts speed up the time for equilibrium to be attained.
Considering the given statements about catalysts:
1) In an equilibrium process, a catalyst increases the rate of the forward reaction, but leaves the rate of the reverse reaction unchanged.
False: A catalyst increases both the forward and reverse reaction rates equally, thereby allowing the system to reach equilibrium faster.
2) A catalyst is not consumed in the course of a reaction.
True: Catalysts are substances that increase reaction rates without being consumed in the reaction.
3) A catalyst must be carefully chosen to shift the equilibrium toward products.
False: A catalyst does not affect the extent or position equilibrium of a reaction since a catalyst speeds up both the forward and back reactions by equal amounts , rather it helps a reaction achieve equilibrium faster.
what energy is walking?
A. light energy
B. sound energy
C. Thermal energy
D. Mechanical energy
E. electrical energy
Answer:
Mechanical
Explanation:
Calculate the mass, in grams, of 0.540 mol of manganese (Mn).
Report your answer with three significant figures.
Answer:
m = 29.6 grams
Explanation:
Given that,
Number of moles = 0.540
The molar mass of manganese = 54.93 g/mol
We know that,
Number of moles = given mass/molar mass
[tex]m=n\times M\\\\m=0.540 \times 54.93\\\\m=29.6\ g[/tex]
So, the required mass of the Manganese is equal to 29.6 grams.
A substance that does not dissolve in a solvent is said to be:
A. insoluble
B. immiscible
C. miscible
D. soluble
4. What is the specific heat of a substance if 5800 joules is
released in a 250 gram sample that will cool the substance from
60 degrees to 45 degrees?
Answer: 23.2
Explanation:
If you have 9.56 moles of aluminum oxide how many moles of sodium oxide could you produce?
Answer:
The answer is 28.68 moles
Explanation:
Hope this helped Mark BRAINLEST!!!
Which of the following statements best describes a
mixture?
O A substance that contains two or more elements chemically joined
O A substance that contains two or more elements not chemically joined
O A substance that contains only one type of atom
O A substance that contains two or more compounds or elements that are
not chemically joined.
The type of potential energy related to an object's height
Answer:
the answer is gravitational potential energy
Answer:
Since the gravitational potential energy of an object is directly proportional to its height above the zero position, a doubling of the height will result in a doubling of the gravitational potential energy. A tripling of the height will result in a tripling of the gravitational potential energy.
Explanation:
Hope this helps?