Answer:
1.75 moles are contained in 500 mL of a 3.5 M NaOH solution.
Explanation:
Molar concentration is a measure of the concentration of a solute in a solution, be it some molecular, ionic or atomic species and indicates the number of moles of solute that are dissolved in a given volume.
The molarity of a solution is calculated by dividing the moles of the solute by the volume of the solution.
[tex]Molarity=\frac{number of moles of solute}{volume}[/tex]
Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].
In this case:
molarity= 3.5 Mnumber of moles of solute= ?volume= 500 mL= 0.5 LReplacing:
[tex]3.5 M=\frac{number of moles of solute}{0.5 L}[/tex]
Solving:
number of moles of solute= 3.5 M*0.5 L
number of moles of solute= 1.75 moles
1.75 moles are contained in 500 mL of a 3.5 M NaOH solution.
Please help!!!! Best answer will get brainliest
Answer:
covalent network
Explanation:
trust me on this one
(1) Complete the word equation for the complete combustion of methane in
oxygen.
→ water +
methane +
en of methane can produce carbon and
Cooled in ice to help the water vapour condense. Tube 2 – contains lime water, goes cloudy to show the presence of carbon dioxide. Word equation: (hydrocarbon + oxygen → carbon dioxide + water) Methane + oxygen → carbon dioxide + water.
What is the oxidation number of carbon in the compound carbon dioxide, CO2?
A) +3
B)+2
C)-3
D)+4
Answer:
the oxidation number is 4
8. What is the chemical equation when calcium chloride combines with water?
Answer:
CaCI2 + H2O = Ca(OH)2 + HCI
Given the [H+] = 3.89x10^-7M, what is the [OH-]?
Answer:
[H][OH] = 10^-7
[OH] = 10^-7/ 3.89x10^-7 = 0.257M
2. Show the molecular formula and electron structure of the simplest compound that forms with only carbon and hydrogen atoms. (1 point)
Answer:
CH3CH2CH2CH2CH2CH2OH-HEXAN-1-OL
Explanation:
hope this helps! plz mark as brainliest! :)
20 POINTS 1. What is the contour interval of the above topographic map? 2. What is the change in elevation from point Y to point Z?
3. Which way does the Maple Stream flow?
4. Which hill is taller?
5. Which hill has the steepest sides?
6. What is the elevation of point A?
Answer:
1 1
Explanation:
Hill
1
Alternative fuel sources such solar and wind energy are gaining popularity and replacing fossil fuels in many applications. While there are many positive benefits to this technology, what negative impacts do they present?
Answer:
Environmental limitations.
Explanation:
The nonrenewable sources of energy include coal, oil natural gas, and nuclear power. While the renewable source of energy include tidal, solar, geothermal, and wind power. All the sources of nonrenewable energy are called fossil fuels. There are many positives of this alternate energy such as clean and clear energy. Though there may be some negative impacts such as land use changes for setting up solar panels, and windmill farms. These techniques are costly to maintain and implement in all sectors.Because both tin and carbon are members of Group 4A(14), they form structurally similar compounds. However, tin exhibits a greater variety of structures because it forms several ionic species. Predict the shape and ideal bond angle, including any deviations, for SnCl3−.
Answer:
See Explanation
Explanation:
Elements in group fourteen are mostly known to form compounds in which there are four electron domains leading to a tetrahedral electron domain geometry.
However, the presence of lone pairs affects the shape of the molecule. SnCl3− has four electron domains, three of them are bond pairs while one is a lone pair. The shape of the molecule is based on a tetrahedron, however the observed geometry is trigonal pyramidal due to the presence of the lone pair. Its bond angle is now less than the predicted 109 degrees.
Explain how the percentages of nitrogen , oxygens and carbon dioxide in the earth atmosphere today have changed from the earth
Answer:
See below
Explanation:
The atmosphere of the earth hundreds of millions of years ago was only water vapour and carbon, both from the one ocean that existed around the continental body of Pangea. The photosynthesis process and exache (⊕) caused the percentages to decrease.
A sample of neon gas at 200.0C has a pressure of 0.325 atm. At what Celsius temperature will the pressure reach 0.675 atm?
Answer:
407.7c
Explanation:
200.0C = 0.325 atm
400.0C = 0.650 atm
407.7C = 0.675 atm
A sample of neon gas at 200.0C has a pressure of 0.325 atm. The temperature is 407.7 C is by the pressure reaches 0.675 atm.
What are gas laws?There are three basis gas laws which relates the pressure, temperature, and volume of the gas.
The temperature and pressure increase is given this.
200.0C = 0.325 atm
400.0C = 0.650 atm
407.7C = 0.675 atm
Thus, the correct option is 407.7C = 0.675 atm.
Learn more about gas laws
https://brainly.com/question/12669509
#SPJ2
What effect does the Earth's surface have on solar radiation?
Answer:
Thus, the proportion of Earth's surface that is covered by ice and snow affects how much of the Sun's solar radiation is absorbed, warming the planet, or reflected. Therefore, snow and ice which are covered in soot from pollution no longer reflect sunlight, but absorb it and so melting increases.
Answer:
Half of the solar radiation is absorbed and converted to infrared (heat).
Explanation:
An object is moving across a surface, but it does not gain or lose speed.which best describes the objects force
Answer:
Constant
Explanation:
Here's the definition of the noun:
"A situation that does not change"
In this case the situation is the speed of the object.
If you'd like to go into further detail, let's move away from English and jump into Physics. The question asked for "object's force" - keyword: 'force'. What's the formula for force? F = m * a.
F = Force, m = mass, a = acceleration.
Okay well, the question said only the speed changes and doesn't mention the mass changing so if the mass changes the force won't be constant. However, if the mass doesn't change (constant), we can continue to acceleration.
The formula for acceleration is (I think) m/s^2, that's metres over time, squared. As we know from English class; the speed is constant and thus the square of that speed is also constant - therefore the acceleration is constant.
Now, putting them together, assuming the mass is constant, we know the acceleration is constant so the force has to be constant. Case closed.
*mic drops, this was a waste of time*
who is really good with chemistry and can help me with some questions/equations?
Answer:
I can help
Explanation:
9. Thallium-208 has a half-life of 3.053 min. How long will it take for 120 g of it to decay
to 7.5 g?
Answer:
12.213 minutes will be taken for 120 g-Thalium-208 to decay to 75 grams.
Explanation:
Radioactive isotopes decay exponentially in time, the mass of the isotope ([tex]m(t)[/tex]), in grams, is described by the formula in time ([tex]t[/tex]), in minutes:
[tex]m(t) = m_{o}\cdot e^{-\frac{t}{\tau} }[/tex] (1)
Where:
[tex]m_{o}[/tex] - Initial mass of the isotope, in grams.
[tex]\tau[/tex] - Time constant, in minutes.
In addition, the time constant associated with the isotope decay can be described in terms of half-life ([tex]t_{1/2}[/tex]), in minutes:
[tex]\tau = \frac{t_{1/2}}{\ln 2}[/tex] (2)
If we know that [tex]m(t) = 7.5\,g[/tex], [tex]m_{o} = 120\,g[/tex] and [tex]t_{1/2} = 3.053\,min[/tex], then the time taken by the isotope is:
[tex]\tau = \frac{t_{1/2}}{\ln 2}[/tex]
[tex]\tau = \frac{3.053\,min}{\ln 2}[/tex]
[tex]\tau \approx 4.405\,min[/tex]
[tex]t = -\tau \cdot \ln \frac{m(t)}{m_{o}}[/tex]
[tex]t = -(4.405\,min)\cdot \ln \left(\frac{7.5\,g}{120\,g} \right)[/tex]
[tex]t \approx 12.213\,min[/tex]
12.213 minutes will be taken for 120 g-Thalium-208 to decay to 75 grams.
12.21 minutes will it take for 120 g of Thallium-208 to decay
to 7.5 g.
What is half life period?Half life period is that time in which half of the reactant is convert into product.
In the question it is given that,
Initial mass of Thallium-208 = 120g
Final mass after decay = 7.5g
And half life of this decay = 3.053 min
Here we can calculate the total time of decay by the formula : T = t × n.
Where, T = total required time
t = half life
n = no. of half life required to decompose reactant.
120 → 60 →30 → 15 → 7.5
From the above sequence it is clear that we require 4 times of half life to decompose 120g to 7.5g.
So, T = 3.053 × 4 = 12.21 minutes
Hence, 12.21 minutes will it take to decay.
To learn more about half life, visit below link:
https://brainly.com/question/2320811
is smoke a compound or a mixture? explain your answer.
Explanation:
hope it is helpful to you ☺️
molecular formula of calcium oxide
Answer:
Calcium oxide, commonly known as lime, is a chemical compound with the formula CaO.
Which galaxy is represented in the
image above?
A. Irregular galaxy
B. Spiral galaxy
C. Elliptical galaxy
D. Electromagnetic galaxy
Answer:
I need to see the galaxy to answer your question
write one word for the following short form of an element
Answer:
symbol?
Explanation:
31. A mixture with sand, pink sugar and water would be best separated using
Answer:
Filtration and evaporation
Explanation:
A mixture of sand, pink sugar and water can be separated by filtration and evaporation.
The pink sugar is already dissolved in the water but the sand remains undissolved in the water hence it can be filtered off. The filtrate now contains the sugar.
The sugar is obtained from the filtrate by evaporation of the solution to yield the solid pink sugar and steam which can be condensed again to give liquid water.
how many atoms are equal to 1.5 moles of hellium
Answer:
There are 1.8×1024 atoms in 1.5 mol HCl
Explanation:
can some kind soul help me plss
convert propanamine to propylalcohol
Answer:
Yeah
Explanation:
Propylene glycol can be dehydrated to propionaldehyde which can in turn be reductively aminated to propylamine.
Propionaldehyde can be converted to n-propyl amine in two steps.
Conversion of propionaldehyde to oxime
Propionaldehyde is treated with hydroxyl amine in weakly acidic medium to form imine product known as propionaldoxime.
CH₃CH₂CHO+NH₂OH->CH₃CH₂CH=N-OH+H₂O
Reduction of imine to form amine
In this step,propionaldoxime is reduced by proper reducing agent like Na in ethanol to form n-propyl amine.
CH₃CH₂CH=NO-Na-C₂H5OH-> CH₃CH₂CH₂NH₂
What is the pH of a solution that has a [OH^-] of 1x10^-2?
2
12
9
8
1. If you have 200 g of Al2(CO3)3 , how many moles will you have? Show your work.
Answer: There are 0.854 moles of [tex]Al_{2}(CO_{3})_{3}[/tex] present in 200 g of [tex]Al_{2}(CO_{3})_{3}[/tex].
Explanation:
Given: Mass of [tex]Al_{2}(CO_{3})_{3}[/tex] = 200 g
As number of moles is the mass of substance divided by its molar mass.
Molar mass of [tex]Al_{2}(CO_{3})_{3}[/tex] is 233.99 g/mol.
Therefore, moles of [tex]Al_{2}(CO_{3})_{3}[/tex] is calculated as follows.
[tex]No. of moles = \frac{mass}{molar mass}\\= \frac{200 g}{233.99 g/mol}\\= 0.854 mol[/tex]
Thus, we can conclude that there are 0.854 moles of [tex]Al_{2}(CO_{3})_{3}[/tex] present in 200 g of [tex]Al_{2}(CO_{3})_{3}[/tex].
What is the state of matter involved in a solution and colloid
Explanation:
colloid is a mixture in which one substance of microscopically dispersed insoluble particles are suspended throughout another substance. However, some definitions specify that the particles must be dispersed in a liquid,[1] and others extend the definition to include substances like aerosols and gels. The term colloidal suspension refers unambiguously to the overall mixture (although a narrower sense of the word suspension is distinguished from colloids by larger particle size). A colloid has a dispersed phase (the suspended particles) and a continuous phase (the medium of suspension). The dispersed phase particles have a diameter of approximately 1 nanometre to 1 micrometre.[
hope it helps.
Answer:
colloids are mixtures in which one or more substances are dispersed as relatively large solid particles or liquid droplets throughout a solid ,liquid or gaseous medium .The particles of a colloid remain and do not settle due to gravity ,and they are often electrically charged
hope it helped(copper is cu) How many copper atoms in 3CuSO,
Answer:
3
Explanation:
because 3CuSO and the 3 in front present how many it has
A cylinder is labeled \"PENTANE.\" When the gas inside the cylinder is monochlorinated, five isomers of formula C5H11Cl result. Was the gas pure n-pentane, pure isopentane, pure neopentane, or a mixture of two or all three of these?
Answer:
a mixture of two these
Explanation:
The number of isomeric monochlorides depends on the structure and number of equivalent hydrogen atoms in each isomer of pentane.
n-pentane has three different kinds of equivalent hydrogen atoms leading to three isomeric monochlorides formed.
Isopentane has four different types of equivalent hydrogen atoms hence four isomeric monochlorides are formed.
Lastly, neopentane has only one type of equivalent hydrogen atoms that yields one mono chlorination product.
Hence the cylinder must contain a mixture of isopentane and neopentane which yields four and one isomeric monochlorides giving a total of five identifiable monochloride products as stated in the question.
Which would be true of a bar magnet?
Choose all that apply:
A. The magnet would be strongest at its two edges.
B. The bar has a uniform strength throughout.
C. The two ends of the magnet are called poles.
D. The two ends of the magnet are positively or negatively charged..
Answer:
C is a North Pole to South Pole
Explanation:
A magnet has two poles
3. Designing the caisson…Using technology you think would be available in the late 1800s, what could you do to keep temperatures in the caisson as low as possible? How else can you protect your workers from the dangers of high heat?
Answer:
By using insulating material.
Explanation:
By making the material cover with insulator in that way the we can protect the workers from the dangers of high heat because the insulator are the poor conductor of heat so the heat from the surrounding environment did not enter inside the metal. There are certain materials which remain cool if they receive heat from the surrounding environment so by using these types of materials can be useful on the cover of caisson to reduce heat in the inner side and protect the workers from the dangers of high heat.
Me podrían decir el nombre de los siguientes alcanos ramificados (the name of the following branched alkanes)
Answer:
e)3-etilo-5,6,6-trimetilodecano