The reaction that is balanced and shows incomplete combustion is:
2 C₅H₁₂ + 11 O₂--> 10 CO + 12 H₂0; option B.
What is a combustion reaction?A combustion reaction is a reaction in which a substance reacts with oxygen to release large amounts of heat and light energy.
In the combustion of carbon-containing compounds, carbon dioxide and water are usually produced.
In incomplete combustion of carbon compounds, carbon monoxide or carbon (ii) oxide is produced.
For a balanced reaction, the moles of atoms of elements on the reactant side are equal to the moles of atoms on the product side.
Learn more about combustion reactions at: https://brainly.com/question/20893322
#SPJ1
The diagram shows an exchange
surface in the human body. Name the
parts labelled 2.
Enter your answer
Answer: villi/villus
Explanation: The parts labeled 2 are villi, many of which are found in the small intestine.
villi/villus exchange surface in the human body which are found in the small intestine.
what are the function of villi ?They are small finger-like folding in the small intestine, A network of capillaries and a big lymph vessel called the lacteal supply the villi.
These are found in the small intestine's inner walls, Villi are specialized for absorption in the small intestine as they have a thin wall, one cell thick, which enables a shorter diffusion path.
They have a large surface area so there will be more efficient absorption of fatty acids and glycerol into the blood stream. They have a rich blood supply to keep a concentration gradient.
For more details villi, visit
https://brainly.com/question/11375300
#SPJ2
How many liters of water are produced from the combustion of 2.5 moles of methane gas?
Answer:
this is your answer 1234
Imagine you are sitting in a room with a volume of 23000 liters and a temperature of 69 degrees F. The total air pressure is 766 mm Hg, and the partial pressure from oxygen is 21% of the total pressure. How many grams of oxygen are in the room?
The mass (in grams) of oxygen gas in the sitting room of 23000 liters is 6412.16 grams
How do I determine the mass of oxygen gas?We'll begin by converting 69 °F to °C. This can be obtained as follow:
Temperature (°F) = 69 °FTemperature (°C) =?°C = 5/9(°F - 32)
°C = 5/9(69 - 32)
°C = 20.6 °C
Next, we shall determine the mole of oxygen gas in the room. This is shown below:
Volume (V) = 23000 L Temperature (T) = 20.6 °C = 20.6 + 273 = 293.6 KTotal pressure = 766 mmHg = 766 / 760 = 1 atmPercentage of oxygen = 21%Presure of oxygen (P) = 21% × 1 = 0.21 atmGas constant (R) = 0.0821 atm.L/Kmol Number of mole (n) =?PV = nRT
0.21 × 23000 = n × 0.0821 × 293.6
Divide both sides by (0.0821 × 293.6)
n = (0.21 × 23000) / (0.0821 × 293.6)
n = 200.38 moles
Finally, we shall determine the mass of oxygen gas in the room
Mole of oxygen gas = 200.38 moles Molar mass of oxygen gas = 32 g/molMass of oxygen gas =?Mole = mass / molar mass
Cross multiply
Mass = Mole × molar mass
Mass of oxygen gas = 200.38 × 32
Mass of oxygen gas = 6412.16 grams
Thus, the mass of oxygen gas is 6412.16 grams
Learn more about mass:
https://brainly.com/question/6613610
#SPJ1
A 2.00 M HCl solution is diluted by transferring 25.0 mL of the solution to a 100.0 mL volumetric flask and adding water to the line on the neck of the flask. What is the concentration of the solution in the flask?
A) 0.250M
B) 0.500M
C) 1.00M
D) 8.00M
Calculate Gibbs energy for the following condition K = 1.7 x 10^2, T = 25 c
The Gibbs free energy of the system is - 12.7 kJ/mol.
What is the Gibbs free energy?The term Gibbs free energy has to do with the amount of thermodynamic work that could be done by a system. We know that we can find the Gibbs free energy by the use of the equilibrium constant and the temperature of the system and that is what we have to do in this question as we do it.
We know that;
ΔG = -RTlnK
ΔG = The Gibbs free energy
R = gas constant
T = temperature
K = equilibrium constant
Thus;
R = 8.314 J/K/Mol
T = 25°C + 273 = 298 K
K = 1.7 x 10^2
When we substitute the values, we have;
ΔG =-(8.314 * 298 * ln 1.7 x 10^2)
ΔG =- 12.7 kJ/mol
We can see from the calculation that we are going to have the Gibbs free energy of the system thus described as - 12.7 kJ/mol.
Learn more about Gibbs free energy:https://brainly.com/question/20358734
#SPJ1
I need help with #2 please
Answer:
Third choice
Explanation
Because reactivity of the elements decrease across the periodic table and it depends on the number of protons it has. Hence low number of protons more reactive.
The girl in the picture is at the highest point in swinging and starts to come down. Which statement best describes the changes
in energy as she begins to descend?
(1 point)
O Kinetic and potential energy are increasing.
O Potential energy is increasing, and kinetic energy is decreasing.
O Kinetic and potential energy are decreasing.
O Kinetic energy is increasing, and potential energy is decreasing.
Kinetic energy is increasing, and potential energy is decreasing statement best describes the changes in energy as she begins to descend.
What energy is called kinetic energy?A particle or an object that is in motion has a sort of energy called kinetic energy. An item gains kinetic energy when work, which involves the transfer of energy, is performed on it by generating a net force. Kinetic energy refers to the energy that a moving thing has as a result of its motion.
What are sources of kinetic energy?Motion is kinetic energy. A object's velocity increases with pace. both the kinetic energy of water flowing (hydraulic energy) and the wind (wind energy), which can be used to produce energy. (Kinetic energy) is a type of energy.
To know more about Kinetic energy visit:
https://brainly.com/question/26472013
#SPJ13
This graph shows the displacements and times for the winner of
a horse race.
What was the average speed of the horse that won the race?
O 0.05 m/s
O 20 m/s
O 45 m/s
Determine if the following salt is neutral, acidic or basic. If acidic or basic, write the appropriate equilibrium equation for the acid or base that exists when the salt is dissolved in aqueous solution.
C₅H₅NHI
The equation that shows that the salt is acidic is;
C₅H₅NHI + [tex]H_{2} O[/tex] -----> C₅H₅N + [tex]H_{3} O^+[/tex] + [tex]I^-[/tex]
Is the salt acidic?We know that when we dissolve certain salts in water, the salts could form an acidic, basic or a neutral solution depending on the kind of interaction that the salt could have with the solvent.
Looking at the salt C₅H₅NHI, we can see that the salt can interact with water so as to form the acid that is called hydro iodic acid as shown by the equation; C₅H₅NHI + [tex]H_{2} O[/tex] -----> C₅H₅N + [tex]H_{3} O^+[/tex] + [tex]I^-[/tex]
Learn more about acid salts:https://brainly.com/question/14091731
#SPJ1
is neon a metal or a non metal
Explanation:
Neon is a non-metal. it belongs to group 8 or 18 of the periodic table of elements and is also referred to as a noble gas.
Fe(s) + 2 HNO3(aq) →Fe(NO3)2(aq) + H₂(g)
What is the total number of oxygen atoms represented in the formula of the iron
compound produced?
Answer: 6
Explanation:
If we are only looking at the number of oxygen atoms in the product then the answer is 6.
NO3 contains 3 oxygen atoms.
(NO3)2 means that we have 2 NO3 groups which means there are 6 oxygen atoms.
Copper metal plus zinc sulfate solution
Write the Molecular equation
Write the total ionic equation
Write the Net ionic equation
Is the reaction category replacement or metathesis?
Copper metal plus zinc sulfate solution : is not possible because the copper metal is less reactive than zinc and copper cannot displace the zinc.
The copper metal with zinc sulfate reaction is not possible because copper is less reactive than the zinc cant cannot displace the zinc. so, the reaction :
Cu + ZnSO₄ ----> no reaction
but the zinc plus copper sulfate is possible , copper is less reactive than zinc and zinc can displace the copper . and the reaction is called as displacement reaction the reacion is given as :
CuSO₄ + Zn -----> ZnSO₄ + Cu
Thus, Copper metal plus zinc sulfate solution : is not possible because the copper metal is less reactive than zinc and copper cannot displace the zinc.
To learn more about Displacement reaction here
https://brainly.com/question/3172917
#SPJ1
10. Help, question is in picture below!
The set of reactions that best represents the diagram of a precipitation reaction is given below:
Li₂SO₄ (aq) + AgNO₃ (aq) ---->
The net ionic equation is given below:
SO₄²⁺ (aq) + 2 Ag⁺ (aq) ----> Ag₂SO₄ (s) (a precipitate)
What are precipitation reactions?Precipitation reactions are reactions in which two soluble solutions when they are mixed result in the formation of an insoluble precipitate.
Precipitation reactions rea usually double replacement reactions.
Double replacement reactions also known as double displacement reactions are reactions in which an exchange of radicals occurs between two metallic cations resulting in the formation of an insoluble compound that forms the precipitate observed.
Considering the given reactions and the products obtained:
NH₄Br (aq) + Pb(C₂H₃O₂)₂ (aq) ---> forms no precipitate
KNO₃ (aq) + CuCl₂(aq) ----> forms no precipitate
Li₂SO₄ (aq) + 2 AgNO₃ (aq) ----> 2 LiNO₃ (aq) + Ag₂SO₄ (s) (forms a precipitate)
NaClO₄ (aq) + CaCl₂ (aq) ----> forms no precipitate
Learn more about double replacement reactions at: https://brainly.com/question/23918356
#SPJ1
Will three different liquids lose heat at the same rate?
Yes, because of the liquid's specific heat capacity or heat capacity, different liquids heat up at varying speeds.
What does the same quantity of heat gain or lose at the same temperature?Which amount of heat is needed to raise the liquid's temperature by one degree Celsius? When analyzing a mass of 1 kg, the term "heat capacity" or "specific heat capacity" refers to the amount of heat needed to raise the temperature of 1 kilogram of liquid or fluid by 1°C.
What aspects of a liquid's rate of heat loss are there?area of the body's surface. nature of the body's surface. the body's surface's composition (material effects conductivity through walls of the body).
To know more about specific heat capacity visit:-
https://brainly.com/question/28302909
#SPJ1
Max Points, 4 Parts,
1. explain to John Dalton what his Solid Sphere Model got correct, and what it got incorrect
2. explain to Dmitri Mendeleev what his periodic table got correct, and what it got incorrect
3. explain to Ernest Rutherford what Niels Bohr's model of the atom would eventually improve compared to his own Nuclear Model
4. Isaac Newton was actually an avid alchemist (popular with the learned thinkers in the 17th century). He began studying chemistry but eventually grew bored of it for the perceived excitement of alchemy. In 1-2 paragraphs, convince Isaac Newton to toss aside his alchemy fixation for true chemistry
The assumption that an atom is indestructible is refuted by the fact that it can be further split into protons, neutrons, and electrons.
However, an atom is the smallest particle involved in chemical reactions. According to Dalton, every aspect of an element's atoms is the same.
The atom is the smallest unit of matter that may be divided without generating particles with an electrical charge. It is also the smallest material with properties resembling chemical elements. As a result, the atom acts as the basic building block of chemistry. Examine various electron configurations in the electron shells that enclose the atomic nucleus of an atom.
Examine various electron configurations in the electron shells that enclose the atomic nucleus of an atom. An atom is primarily made of space. The rest is made up of a positively charged nucleus made up of protons and neutrons that is surrounded by a cloud of negatively charged electrons. The nucleus is small and dense in comparison to electrons, which are the lightest charged particles in nature.
To know more about atoms visit : brainly.com/question/13654549
#SPJ1
Use the drop-down menus to identify the parts of DNA.
Label A
Label B:
The DNA parts are identified as:
Label A is Nitrogen basesLabel B is Sugar phosphate backboneWhat are genetic codes?Genetic codes are nucleotide sequences in deoxyribonucleic acids (DNA) and ribonucleic acids (RNA) that determines the order of an amino acid which is the building block of proteins. It is a set of rules for translating information encoded genetic materials by living cells.
The part labelled A are called Nitrogen bases containing adenine and thymine, T pair, cytosine, C and guanine, G pair that are bound to form DNA while the Sugar phosphate backbone forms the structural base of the DNA and RNA.
The complete question is:
Use the drop-down menus to identify the parts of DNA.
Label A
Label B
Learn more on DNA here: https://brainly.com/question/16099437
#SPJ1
Answer: Label A is nitrogen bases
Label B is sugar phosphate backbone
Solid potassium (K) conducts an electric current, whereas solid potassium iodide (KI) does not
because a. solid potassium is a nonmetal
b. solid potassium has a delocalized sea of electrons and KI has its cations and anions
too close together
c. KI has covalent bonds
d. Kl needs to be reacted with another compound first
Solid potassium (K) conducts an electric current, whereas solid potassium iodide (KI) does not because solid potassium has a delocalized sea of electrons and KI has its cations and anions.
How does potassium iodide work?Positively charged potassium and negatively charged iodine combine to form the straightforward inorganic ionic chemical potassium iodide. It is solid at room temperature and resembles sodium chloride or table salt in terms of crystalline structure.
The major uses of potassium iodide are to treat hyperthyroidism and as a dietary supplement for those who are iodine deficient. Additionally, it is utilized as an expectorant to treat asthma and other long-term respiratory disorders, as well as to shield the thyroid gland from radiation.
When potassium iodide is dissolved in water, it splits into cations and anions, enabling free electron movement across the solution. It does not conduct electricity when it is in a dry crystal state, though, like other ionic compounds.
To know more about potassium iodide, visit:
https://brainly.com/question/12050170
#SPJ13
Although the heat source is at the bottom of the beaker, all of the water is the same temperature.
What keeps the water at the top of the beaker the same temperature as that of the bottom?
Responses
Heat from the burner radiates through the liquid and causes even heating.
Heat from the burner radiates through the liquid and causes even heating.
Evaporation heats the water at the top and the flame heats the water at the bottom.
Evaporation heats the water at the top and the flame heats the water at the bottom.
The walls of the beaker reflect heat towa
Heat from the burner radiates through the liquid and causes even heating. Due to this reason, the water at the top of the beaker the same temperature as that of the bottom. The correct option is option A.
What is temperature?Temperature is used to measure degree or intensity of heat of a particular substance. Temperature is measured by an instrument called thermometer.
Temperature can be measured in degree Celsius °c, Kelvin k or in Fahrenheit. Temperature is a physical quantity. Heat always flow from higher temperature source to lower temperature source. Heat from the burner radiates through the liquid and causes even heating. Due to this reason, the water at the top of the beaker the same temperature as that of the bottom.
Therefore, the correct option is option A.
To know more about temperature, here:
https://brainly.com/question/13694966
#SPJ1
How many grams of sodium iodide, Nal, must be used to produce 90.2 g of iodine, 1₂?
mass:
g Nal
300 grams of sodium iodide, Nal, must be used to produce 90.2 g of iodine, I₂
Sodium iodide is the ionic compound formed from the chemical reaction of sodium metal and iodine
Here given data is
I₂ has the molar mass = 253.8g/mol
So how many moles of I₂ we want to produce = 90.2 g I₂ ×1mol I₂ /253.8g/mol = 0.35 mole of I₂
Then the conversion of NaI to I₂ are
2 NaI → 2Na + I₂
0.35 mole of I₂ × 2 mole of NaI/mole of I₂ = 2 mole of NaI are needed
covert this value into gram
2 mole of NaI ×150. g NaI / mole NaI = 300 gram NaI would be needed
Know more about gram
https://brainly.com/question/6579020
#SPJ1
I need help on question number 3 please
Answer:
.......element 3 ............
convert 0.87 atm to inches Hg. please explain step by step
Answer:
26.03 inHg
Explanation:
1 atm = 29.92 inHg
0.87 atm = 29.92 inHg x 0.87
0.87 atm = 26.03 inHg
This is the name of the variable in a scientific experiment that is controlled by the scientist
O Negative control
O Independent Variable
O Dependent Variable
O Positive control
Answer:
b.Independent variable
Explanation:
The independent variable is the one that is changed by the scientist. To insure a fair test, a good experiment has only one independent variable. As the scientist changes the independent variable, he or she records the data that they collect.
.
Which practice is the most sustainable?
A. Using a combination of paper and plastic grocery bags only once
B. Using cloth grocery bags over and over again
C. Using paper grocery bags once and then recycling them
D. Using plastic grocery bags once and then recycling them
The practice is the most sustainable is using cloth grocery bags over and over again.
The sustainable practices are the practices which supports the ecological and economic health . the is of plastic bag , paper or cloth bag over and over again . we have to reuse for the shopping purpose. go for the paperless document. cloth bag are reusable and better than a plastic bags. cloth bag will reduces the plastic use and the pollution will also reduce caused by the plastic bags.
Thus, The practice is the most sustainable is using cloth grocery bags over and over again.
To learn more about sustainable practice here
https://brainly.com/question/14815584
#SPJ1
5. Describe the 3rd criterion, ‘Keep costs low’ and explain why it is important.
In business, it is crucial to keep costs low because when costs exceed the profits or income then the business runs out of cash and becomes bankrupt.
What are costs?A cost is the worth of money that has been used up to create something or supply a service and is thus no longer accessible for use in production, research, retail, or accounting.
In business, the cost might be one of acquisition, in which case the money spent to obtain it is recognized as cost.
Businesses incur two sorts of expenses: fixed and variable costs. Variable costs change with production, but fixed costs do not. Overhead expenses are another term for fixed costs.
Learn more about costs:
https://brainly.com/question/15135554
#SPJ1
If you had 1.0 L of 0.25 M LiOH - how many moles of OH- ions were produced when LiOH was dissolved in water?
a) How many moles of LiOH do you have in 1.0 L of 0.25 M LiOH?
b) What is the mole to mole ratio of LiOH to OH- in the balanced chemical equation?
c) How many moles of OH- are in 1.0 L of 0.25 M LiOH?
d) Bonus: What is the pH?
a) The number of moles of LiOH in 1.0L of 0.25M LiOH is 0.25.
b) The mole-to-mole ratio of LiOH to OH⁻ is 1:1.
c) The number of moles of OH⁻ ions in 1.0L of 0.25M LiOH is 0.25.
d) The pH is equal to 13.39.
What is a mole?A mole can be defined as a unit for the measurement of a huge number of entities of atoms, molecules, ions, or other particular particles. The number of entities constitute in one mole is equal to 6.023 × 10 ²³ which is known as Avogadro’s constant.
The dissociation of LiOH in water is as:
LiOH (aq) → Li⁺(aq) + OH⁻(aq)
The mole-to-mole ratio of LiOH to OH- in the balanced chemical equation is 1 : 1 as one mole of LiOH produces one mole of OH⁻ ions.
Given, the number of concentrations of LiOH solution = 0.25 M
The volume of the solution = 1.0 L
The number of moles of LiOH = Molarity ×Volume
n = 0.25 × 1
n = 0.25 mol of LiOH
The number of moles of ions of OH⁻ from LiOH = 0.25 mol
We know that pH + pOH = 14
pH = 14 -pOH
pH = 14 - (-log [OH⁻])
pH = 14 + log (0.25)
pH = 13.39
Learn more about the mole, here:
brainly.com/question/26416088
#SPJ1
A 135.0-g sample of a metal at 153.0 °C is added to 255.0 g of ethylene glycol (specific heat = 2.43 J/g･ °C) in a calorimeter at 25.7 °C. The temperature of the ethylene glycol rises to 38.2 °C. Calculate the specific heat capacity of the metal, assuming that all the heat lost by the metal is gained by the ethylene glycol.A 135.0-g sample of a metal at 153.0 °C is added to 255.0 g of ethylene glycol (specific heat = 2.43 J/g･ °C) in a calorimeter at 25.7 °C. The temperature of the ethylene glycol rises to 38.2 °C. Calculate the specific heat capacity of the metal, assuming that all the heat lost by the metal is gained by the ethylene glycol.
Answer:
q
=
−
176000
J
×
1
k
J
1000
J
=
−
176
k
J
The specific heat capacity of the metal can be calculated using calorimetric equation. The specific heat capacity of the metal is 0.499 J/g °C.
What is specific heat capacity?Specific heat capacity of a substance is the heat energy required to rise its temperature by one degree Celsius per one gram. It is an intensive property and thus constant for a substance.
The calorimetric equation connecting the mass m, specific heat capacity c, temperature difference ΔT with the heat energy q is written as :
q = m c ΔT .
Given the heat energy of the metal is lost to ethylene glycol. Hence the heat energy change for both of the substance are equal and can be written as follows:
135 g × (153 -38.2 °C ) × c = 255 g × 2.43 J/g °C × (38.2 -25.7 °C)
c = [ 255 g × 2.43 J/g °C × (38.2 -25.7 °C) ] / [ 135 g × (153 -38.2 °C ) ]
= 0.499 J/g °C.
Hence, the specific heat capacity of the metal is 0.499 J/g °C..
To find more on calorimetry, refer here:
https://brainly.com/question/11477213
#SPJ2
The autoionization of water is a reversible reaction.
2H₂O ⇌ H3O⁺ + OH⁻
This reaction is endothermic (ΔH is positive).
What is the effect of increasing temperature of water on:
The numerical value of Kw
Answer 1
Choose...
pH
Answer 2
Choose...
[H3O+ ]
Reaction will move forward and favor according to Le Chatelier's principle on increasing temperature of water.
According to Le Chatelier's principle, the position of equilibrium will shift if a system in a state of dynamic equilibrium is disturbed by a change in its conditions. The point of equilibrium will shift toward the products to offset the additional reactant if you raise the concentration of one of the reactants. For instance, extra N2 will react with H2 in the system if it is added. More ammonia will be produced as a result of this.
Similar to this, the location of equilibrium would move to the left if you reduced the concentration of one of the reactants. In this instance, removing N2 would cause more NH3 to break down into the reactants.
To know more about Le Chatelier's principle visit https://brainly.com/question/2001993
#SPJ1
what would be the indepenndant variable, control group, and dependant variable in the how much salt is needed to float expirament
In the egg floating experiment, the independent variable is adding salt to the water, the dependent variable is the egg floating in the water and the control group is the beaker just with water.
The egg floating experiment is done to test the density of the egg with respect to the water. Generally, the egg sinks in the water as the egg has a higher density than water.
On the other hand, if salt is added to water to form a salt solution and if the egg is added to that solution, then the egg floats. This is because the density of the egg is lesser than the salt solution leading the egg to float.
Therefore, in this experiment, the independent variable is the amount of salt added to the water and the dependent variable is the egg floating in the water as it is dependent on the amount of salt added the water. Thus, the control group is the beaker with water.
To know more about controlled experiments, click below:
https://brainly.com/question/5067559
#SPJ9
4. A solid is 5 cm tall, 3 cm wide and 2 cm thick. It has a mass of 129 g. What is its density?
The Mackenzie River in northern Canada contains, on average,
0.820 mM Ca2+
0.430 mM Mg2+
0.300 mM Na+
0.0200 mM K+
0.250 mM Cl–
0.380 mM SO42–
and
1.82 mM HCO3–.
What, on average, is the total mass of these ions in 4.75 L of Mackenzie River water?
On average, the total mass of ions in 4.75 liters of Mackenzie River water is 0.466 g grams.
What is the total mass of ions?The formula mass of an ionic compound is determined in the same manner as the formula mass of a covalent compound is determined: by adding the average atomic masses of all the atoms in the compound's formula.
Hence, the total mass is computed as follows:
(0.820 mM Ca 2⁺) X ( 2.25 L) = 1.845 mmoles at 40.0 g/mol = 73.8 mg
(0.430 mM Mg 2⁺) X ( 2.25 L) = 0.9675 mmoles at 24.3 g/mol = 23.51 mg
(0.300 mM Na⁺) X ( 2.25 L) = 0.675 mmol at 23.0 g/mol = 15.52 mg
(0.0200 mM K⁺) X ( 2.25 L) = 0.045 mmol at 39.1 = 1.75 mg
(0.250 mM Cl-) X ( 2.25 L) = 0.5625 mmol at 35.45 g/mol = 19.94 mg
(0.380 mM SO₄²-) X ( 2.25 L) = 0.855 mmol at 96.06 g/mol = 82.13 mg
(1.82 mM HCO₃ -) X ( 2.25 L) = 4.095 mmol at 61.02 g/mol = 249.87 mg
Thus, total mass = 73.8 + 23.51 + 15.52 + 1.75 + 19.94 + 82.13 + 249.87
= 466.52mg
Converted into grams we have:
466.52/1000
= 0.46652
Hence, on average, the total mass of these ions 4.75 L [tex]\approx[/tex] 0.47 grams.
Learn more about Total Mass:
https://brainly.com/question/17552181
#SPJ1