Answer:
about 93 billion light years
Explanation:
The observable Universe is, of course, much larger. According to current thinking it is about 93 billion light years in diameter.
Answer:
93 miles
Explanation: We can determine the distance to the sun using the time light takes to get to Earth. Just multiply the speed of light by the amount of time it takes light to get to Earth. That's 500 seconds.
186,282 miles per second x 500 seconds = 93,141,000 miles
The sun is about 93 million miles away from Earth. It will take our fastest space shuttle moving at a constant maximum speed about 108 days to travel this same distance.
When the temperature 20 degrees celsius (c),what is it on the Fahrenheit (f)scale??/r/nUse the formula f=(9/5xC)+32
Given :
Temperature in Celsius is 20 degree.
To Find :
The value of same temperature in Fahrenheit.
Solution :
It is given that temperature in Fahrenheit can be found by :
[tex]F = \dfrac{9}{5}C + 32[/tex]
Putting value of C = 20 in above equation, we get :
[tex]F = \dfrac{9}{5}\times 20 + 32\\\\F = 68 \ F[/tex]
Therefore, the value in Fahrenheit is 68 F .
Record your evidence about the Moon's appearance
changing because the position of the Moon changes.
Help please…
Answer:
A solar eclipse .
It is one that occurs when the moon gets between the Earth and the Sun and it casts its shadow over the Earth. A solar eclipse only happens during the phase of new moon when the moon is indirect blockage of sun rays from reaching the earth thus causing a full shadow of the moon to fall on the Earth’s surface.
2 A lunar eclipse can only occur when there is a full moon. An eclipse of the moon happens only at full moon and only when the moon passes through some portion of the Earth’s shadow. The shadow in made of a two cone-shaped components, one which is nested inside the other.
3. Earth blocks sunlight from reaching the moon's surface. There are three categories of lunar eclipse according to the blockage of the sun rays. In a penumbral lunar eclipse, the moon passes through Earth’s penumbral shadow. The partial lunar eclipse occurs when a portion of the moon passes through Earth’s umbral shadow. The total lunar eclipse happens when the entire moon passes through Earth’s umbral shadow.
4.When an object in space comes between the sun and earth. It is one that occurs when the moon gets between the Earth and the Sun and it casts its shadow over the Earth. A solar eclipse only happens during the phase of new moon when the moon is indirect blockage of sun rays from reaching the earth thus causing a full shadow of the moon to fall on the Earth’s surface.
5.A total lunar eclipse. In this type of lunar eclipse, the events are clearly visible and striking to view because the Moon surface appear red in color. During the occurrence of the lunar eclipse events, 35% of the entire eclipse is total eclipse.
6. Wide, dark areas and strange spots and ridges –Galileo described the surface of the moon as being uneven and rough. In addition to that, he described the surface as crowded with depressions and bulges. In his original sketches, the long shadows cast by craters were represented by dark sided of the moon sketch.
7. Waxing gibbous .During the cycle of the moon, it undergoes several phases; new moon-new crescent-first quarter-waxing gibbous-full moon-waning gibbous-last quarter-old crescent-new moon. The new moon phase cannot be seen because the part receiving sun rays in then pointed away from the earth. The rest of the phases are visible from the earth.
8. New moon .
During the cycle of the moon, it undergoes several phases; new moon-new crescent-first quarter-waxing gibbous-full moon-waning gibbous-last quarter-old crescent-new moon. The new moon phase cannot be seen because the part receiving sun rays in then pointed away from the earth. The rest of the phases are visible from the earth.
9. Because the Southern Hemisphere has more direct sunlight .During the winter months, the Northern Hemisphere is tilted away from the sun, thus it receive sunrays at an angle thus it experiences the cold weather. At this period, it is summer in the Southern Hemisphere.
Explanation:
The moon is the earth's closed satellite and it gets light from the sun. The moon has several phases that are seen within 27 days cycle.
There are 6-7 phases of the moon that is the new moon, the first quarter, the full moon, secondary phases like the waning and waxing crescent, the waxing and waning gibbous. The new moon starts with the moon coming in between the sun and the earth. Then comes the waning crescent phase between the new moon and the quarter. The first quarter is a half-moon, 90 degrees east of the sun. The waxing gibbous is between the first quarter and full moon. The full is when sun illumination is 100% and again waning gibbous descends back to last quarter or the 3rd quarter.Hence as the earth changes its position the moon also revolves in a similar manner.
Learn more about the evidence about the Moon's appearance changing because the position of the Moon changes.
brainly.in/question/28774997.
1) HA + H2O <--> H3O+ + A- ....what is HA considered?
O
Acid
Base
Conjugate Acid
Conjugate Base
HELPPPPPP!!!! SHOW WORK
Calculate the pressure exerted by heels of a 100 lb woman in high heels, if the area beneath the heel of each shoe is 0.25 square inch
Answer:
P = 400 Lb/in²
Explanation:
We are given;
Weight of woman; W = 100 lb
Area beneath heel of shoe; 0.25 in²
Now, we want to find pressure.
Formula is;
P = F/A
Where;
F is force exerted by the object which is equal to weight of the object
A is area covered by object
Thus;
P = 100/0.25
P = 400 Lb/in²
the highest concentration of life extorts in the top 200 meters of ocean water what is the most important factor that influences this concentration of life
which element is extracted from bauxide ore
No bots!!!!!! When 20.4 g of sodium metal are mixed with chlorine gas, how many g of NaCl are produced?
51.8 g NaCl
Explanation:
2Na(s) + Cl2(g) ---> 2NaCl(s)
20.4 g Na × (1 mol Na/22.9898 g Na) = 0.887 mol Na
0.887 mol Na × (2 mol NaCl/2 mol Na) = 0.887 mol NaCl
0.887 mol NaCl × (58.44 g NaCl/1 mol NaCl) = 51.8 g NaCl
6.6 moles of ZnO to molecules
Answer:
3.97e24
Explanation:
For every mol of any substance there are 6.02x10^23 molecules
so
6.6(6.02x10^23)= 3.97x10^24 Molecules of ZnO
A large dam was constructed across a river to create a reservoir on one side. This led to the sinking of nearby forests, which
impacted plants and animals and caused a decrease in biodiversity, Trees were also cut down to construct the dam, which led to
increased soil erosion and reduced soil fertility.
A scientist wants to reduce the impact of the dam's construction and improve the biodiversity of the ecosystem. Which solution
should the scientist choose?
A. relocating people to live in the area around the dam
B. planting trees around the reservoir to decrease soil erosion
c. using synthetic fertilizers to improve soil fertility
OD. building a small series of dams on nearby streams
Answer:
B
Explanation:
One of the main problems is the soil erosion reducing the fertitlity of the soil, thus reducing it's chances of the soil helping plant growth, thus reducing biodiversity. The other selections worsen the problem.
10. What is the mass number, symbol, and
charge of an ion that contains 87 protons,
136 neutrons and 86 electrons?
Explanation:
mass number = sum of protons and neutrons
= 87 + 136
= 223
chemical symbol = Fr
ion charge = +1 (because it has one more proton than electron)
atomic mass number = sum of protons and neutrons
= 87 + 136
= 223
chemical symbol = Fr, ion charge = +1 (because it has one more proton than electron)
What is atomic mass ?Atoms are the basic and smaller units of elements which cannot be broken down further chemically, atoms and elements are organized and represented onto a display called the periodic table.
Atoms are composed of protons, neutrons, and electrons, where protons and neutrons present at the nucleus center of the atom where as electron surrounds the nucleus.
The center of the atom makes up most of the mass of the atom as this is made up of protons and neutrons. Protons are positively charged particle and neutrons have neutral charge, respectively, and each are have a mass of 1 atomic mass unit (amu).
Electrons are negatively charged particle and Amu's are units of measurement for atomic mass, proton and neutron are both equal to 1 amu.
Atomic mass units are based on the masses of protons and neutrons band one carbon atom has only six protons and usually six neutrons in the nucleus.
For more details regarding atomic mass, visit
https://brainly.com/question/17067547
#SPJ2
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA HELP
Answer:
c
c
Explanation:
mark me brainliest pls
Can someone help me with this question pls?
Explanation:
frequency = 1 wave/10s = 0.1 Hz
wavelength = 5.8 m
speed = wavelength × frequency
= (5.8 m)(0.1 Hz)
= 0.58 m/s
pls can someone mention 5 example of fine chemicals
Why is energy released when intermolecular bonds form?
Answer:
Forming bonds requires energy
Explanation:
Creating a bond is bringing 2+ atoms into a more stable position.
You travel 35 meters in 26 seconds, what is your average speed?
Answer:
1.346 meters per second
Explanation:
You traveled 35 meters in 26 seconds
35 / 26 = avg speed.
35 / 26 = 1.346...
How many grams of iron (III) oxide are needed?
Answer:
The SI base unit for amount of substance is the mole. 1 mole is equal to 1 moles Iron(III) Oxide, or 159.6882 grams.
(1-6) Which of the electron movements shown below (A, B, C, or D) will emit the highest energy light?
A
B
с
D
na3
ng
n=5
n=6
ОА
OB
Ос
OD
Answer:
I would say D (not sure tho)
Explanation:
Anyone know this question
Answer:
Second option. 3
Explanation:
In order to balance a equation you need to have the same amount of atoms/moles in both sides.
Na₃PO₄ + _ HCl → 3NaCl + H₃PO₄
In reactant side we have 3 Na and we have the same amount in product side.
We also have 1 P and 4 O in both sides of the equation.
As we have 3 moles of NaCl in product side, this means we have:
NaCl → Na⁺ + Cl⁻
3 moles of Na⁺ and 3 moles of Cl⁻. In conclussion we need 3 moles of Cl⁻ in reactant side.Then, the stoichiometry of HCl must be, 3.
3 moles of HCl means that we have 3 moles of protons (H⁺).
HCl → H⁺ + Cl⁻
If you see the phosphoric acid, we also have 3 moles of protons.
H₃PO₄ → 3H⁺ + PO₄³⁻
Complete balanced equation is:
Na₃PO₄ + 3HCl → 3NaCl + H₃PO₄
the lower the kinetic energy of the solute particles:
Answer:
the higher the kinetic energy
Explanation:
because their will be easy movement of particles.
Student added a strip of aluminium metal in aqueous copper(2)Sulfate but no reaction occured. Suggest a reason why.
Answer:
See Explanation
Explanation:
It is a common observation that a strip of aluminium metal in aqueous copper(II)Sulfate does not show any visible reaction. Aluminium is normally expected to displace copper in solution since it is higher than copper in the electrochemical series.
The reason for this is that aluminium forms an oxide film around its surface which prevents reaction with aqueous copper(II)Sulfate. This oxides film protects the aluminium surface such that it is now unable to react with the aqueous copper(II)Sulfate
Please help ASAP!!!!!!!!!!!!
1) What properties of a supercritical fluid are more similar to those of a liquid than a gas?
2) What properties of a supercritical fluid are more similar to those of gas than a liquid?
3) Why does CO2 need to be a supercritical fluid for the process of decaffeination?
What is the percent composition of YAG (Yttrium Aluminum Garnet). The formula for
YAG is (Y3A15012).
Answer: Y 21.38 % , Al 32.44 % and O 46.16 %
Explanation: Molar mass of YAl5O12 is 88.91 + 5·26.98+12·16
= 415.81 g/mol
m-% ( Y) = 88.91 / 415.81 = 21.38 % , m-% (Al) = 5·26.98 / 415.81 =
32.44 % , rest is Oxygen
What particle has no electrical charge and is found in the nucleus?
O Proton
O Neutron
O Electron
Answer:
electron is the right answer
Answer:
[tex]\huge\mathfrak\red{Answer...} \\ \\ \huge\mathfrak\purple{neutron} \\ \\ \huge\mathfrak\pink{hope \: it \: helps..}[/tex]
Calcular las fracciones molares de los componentes de una disolución formada por: 250 g de agua, 50 g de ácido acético y 25 g de cloruro de sodio.
The question is: Calculate the molar fractions of the components of a solution made up of: 250 g of water, 50 g of acetic acid and 25 g of sodium chloride.
Answer: The mole fraction of water, acetic acid and sodium chloride is 0.916, 0.054, and 0.028.
Explanation:
As number of moles is the mass of substance divided by its molar mass.
Therefore, moles of given species are calculated as follows.
The number of moles of water (molar mass = 18 g/mol):
[tex]Moles = \frac{mass}{molar mass}\\= \frac{250 g}{18 g/mol}\\= 13.88 mol[/tex]
The number of moles of acetic acid (molar mass = 60.052 g/mol):
[tex]Moles = \frac{mass}{molar mass}\\= \frac{50 g}{60.052 g/mol}\\= 0.832 mol[/tex]
The number of moles of sodium chloride (molar mass = 58.44 g/mol):
[tex]Moles = \frac{mass}{molar mass}\\= \frac{25 g}{58.44 g/mol}\\= 0.427 mol[/tex]
Therefore, mole fraction of each component is calculated as follows.
Mole fraction of water:
[tex]Mole fraction = \frac{moles of water}{Total moles}\\= \frac{13.88}{13.88 + 0.832 + 0.427}\\= \frac{13.88}{15.139}\\= 0.916[/tex]
Mole fraction of acetic acid:
[tex]Mole fraction = \frac{moles of water}{Total moles}\\= \frac{0.832}{13.88 + 0.832 + 0.427}\\= \frac{0.832}{15.139}\\= 0.054[/tex]
Mole fraction of NaCl:
[tex]Mole fraction = \frac{moles of water}{Total moles}\\= \frac{0.427}{13.88 + 0.832 + 0.427}\\= \frac{0.427}{15.139}\\= 0.028[/tex]
Thus, we can conclude that mole fraction of water, acetic acid and sodium chloride is 0.916, 0.054, and 0.028.
How many moles in 18g of H3PO4?
Answer:
0.184 mol
Explanation:
Look up molar masses for the elements that comprise H₃PO₄:
H = 1.008 g/mol
P = 30.97 g/mol
O = 15.99 g/mol
The molar mass of H₃PO₄ is a weighted sum of these (3 hydrogen + 1 phosphorus + 4 oxygen) that comes out to about 97.99 g/mol.
Then
(18 g H₃PO₄) × (1/97.99 mol/g) ≈ 0.1837 mol
Jerry designed a coat that he thinks could keep people dry during a thunderstorm. He created a prototype that looks just like his drawing. What should Jerry do next?
Answer:
The next step is prototype testing
Explanation:
The stages of the design process are;
1) Situation analysis
Paper based research is conducted on the situation to obtain the situation parameters
2) Brief writing
With the situation analysis developed above, the brief of the current situation is put down on paper
3) Problem research
The problem is researched and experimented on with the development of a paper based proof of the possible concept
4) Specification writing
The specifications of the problem are outlined
5) List the possible solutions
The possible solutions are brainstormed and listed
6) Preferred solution selection
The preferred solution is selected based on the constraints in the situation
7) Create working drawing/plan
The working design drawing of the selected solution or concept is completed and evaluated for applicability
8) Building of a prototype
The design is converted into a prototype which is a model of the actual solution
9) Testing of the prototype
The prototype is tested for functionality, for ability to work in the intended situation and/or in the intended system
10) Report writing
A report is made on the outcome of the tests for review before production
Therefore, after the prototype is created, stage 8, the next step is the testing of the prototype stage 9.
i am boréd wanna chàt
yeah same I'm bóred too -,-
Answer:
sure hi ...............................
A 250. cm3 sample of neon is collected at standard temperature and pressure. Assuming the volume remains constant, what would be the pressure of the neon at 44.0°C?
a) 118 b)87.2 c) 0.00 d)290
Answer:
The answer is 118 kPa.
Explanation:
Suppose that 13g of a nonelectrolyte is dissolved in 0.50 kg of benzene. The
boiling point of this solution is 80.61 °C. The normal boiling point of benzene is
80.10 °C. The molal boiling point elevation constant for benzene is 2.53 °C/m. What is the
molar mass of the solute?
Answer:
128.98 g/Mol
Explanation:
ΔTb = Kb * m * i
Where;
ΔTb = boiling point elevation
Kb = boiling point constant
m = molality of the solution
i = Van't Hoff factor
Hence;
Where molality = number of moles of solute/mass of solvent in Kg
Number of moles of solute = mass/Molar mass
So;
80.61 - 80.10 = 2.53 * 13g/M/0.5 * 1
Where M is the molar mass of the solute
0.51 = 2.53 * 13g/M/0.5
0.51 = 2.53 * 13/M * 1/0.5
0.51 = 32.89/M * 1/0.5
0.51 * 0.5 = 32.89/M
0.255 M = 32.89
M = 32.89/0.255
M= 128.98 g/Mol
Suggest a procedure for separating iron shavings from sawdust. Explain why this procedure would work.
Dont send a file i will report you if you do
Answer:
Magnetic separation
Sawdust is a non-magnetic material whereas iron shavings are magnetic. When a magnet is brought near a mixture of iron shavings and sawdust, the iron shavings will be attracted to the magnet while the sawdust will not. Thus, the iron shavings will be separated from the sawdust.
Explanation:
Separation techniques makes use of the differences in the properties of components of mixtures to separate theses components, one from another.
In a moxturemof iron shavings and sawdust, a suitable separation technique would be the use of magnetic separation.
The use of this separation technique is abasednonnthe principle that when a magnetnis brought near to a mixture containing magnetic and non-magnetic materials, the magnetic materials will be separated from the non-magnetic materials due to their attraction to the magnet. Sawdust is a non-magnetic material whereas iron shavings are magnetic. When a magnet is brought near a mixture of iron shavings and sawdust, the iron shavings will be attracted to the magnet while the sawdust will not. Thus, the iron shavings will be separated from the sawdust.