Answer:
2 = C
3 = B
1 = A
Explanation:
what is work done aganist gravity?
Lifting an object and becomes potential energy of the object (Earth system). The change in gravity potential energy, ΔPEg, is ΔPEg = mgh.
With h being the increase in height and g the acceleration due to gravity.
I hope this helped :T
What is the wavelength of sound wave in air that has a temperature of 24.6°C that has a frequency of 440.8 Hz?
A. 465.40 m
B. 0.78 m
C. 17.92 m
D. 0.75 m
How did we see through Venus thick atmosphere?
Answer:
The Venusian atmosphere supports opaque clouds of sulfuric acid, making optical Earth-based and orbital observation of the surface impossible. Information about the topography has been obtained exclusively by radar imaging. Aside from carbon dioxide, the other main component is nitrogen
Explanation:
Because Venus has such a dense atmosphere which is some 100 times thicker than the earth's. Evidently, Venus is sufficiently close to the Sun that the little carbon dioxide it had in its early, Earth-like atmosphere caused the surface to warm up and leach out more carbon dioxide into the atmosphere.
An air track car with a mass of 0.55 kg and velocity of 5.8 m/s to the right collides and couples with a 0.45 kg car moving to the left with a velocity of 3.9 m/s. What is the combined velocity of the cars just after the collision?
Explanation:
Given:
m1 = 0.55 kg
m2 = 0.45 kg
vi1 = +5.8 m/a
vi2 = -3.9 m/a
Solve for V
m1vi1 + m2vi2 = (m1 + m2)V
(0.55 kg)(+5.8 m/s) + (0.45 kg)(-3.9 m/s) = (0.55 + 0.45)V
V = +1.46 m/a
This means that the combined mass after the collision is moving to the right at 1.46 m/s
Sodium has an atomic mass of 23 and an atomic number of 11, so the
number of neutrons must be_______
Answer here
Answer:
12 Neutrons
Explanation:
So the mass of sodium is 22.990. You round it up to get 23(as stated in the problem). So, what exactly is atomic mass?
Atomic Mass is the total amount of neutrons and protons added up to form a total mass. So when you subtract 23-11 you get 12 Neutrons.
Tip: Don't know if you need this but-
The neutrons and protons are typically close in number (unless it's an isotope). So say that you subtract and the numbers of protons and neutrons aren't close at all. Well if that's the case, it's probably wrong.
hope this helps!!
A 20×10⁹charge is moved between two points A andB that are 30mm apart and have an electric potential difference of 600v between them. calculate a) the electric field strength between A and B b)the work done on the charge.
Answer:
90x20=1800
Explanation:
just multiply 10 & 9 and then mutiply 90x20 or 20x90
Un tren va a una velocidad de 18m/s frena y se detiene en 15s calcula su aceleracion y la distancia recorrida al frenar
Answer:
Acceleration is -1.2 m/s² and distance covered is 135 m.
Explanation:
A train going at a speed of 18m / s brakes and stops in 15s calculates its acceleration and the distance traveled when braking
Given that,
The initial speed of the train, u = 18 m/s
Final speed, v = 0
Time, t = 15 s
We need to find acceleration and distance traveled when braking. Let a is acceleration and distance traveled.
Acceleration,
[tex]a=\dfrac{v-u}{t}\\\\a=\dfrac{0-18}{15}\\\\a=-1.2\ m/s^2[/tex]
Using third equation of motion,
[tex]v^2-u^2=2ad\\\\d=\dfrac{v^2-u^2}{2a}\\\\d=\dfrac{0^2-18^2}{2\times (-1.2)}\\\\d=135\ m[/tex]
Hence, acceleration is -1.2 m/s² and distance covered is 135 m.
The liquid pressure exerted in one direction only
The Universal Space Agency wants to know the results of your Sim investigation. Write your report to the lead chemist, explaining why the staff can smell the chocolate bar. Use evidence from your investigation in your explanation.
Answer:
Condensation can also produce water droplets on the outside of soda cans or glasses of cold water. When warm air hits the cold surface, it reaches its dew point and condenses. This leaves droplets of water on the glass or can. When a pocket of air becomes full of water vapor, clouds form.
Explanation:
Which situation would create a field like the one shown here?
A. interaction between two magnetic south poles
B. interaction between two magnetic north poles
C. interaction between a south pole and a north pole
D. interaction between a magnetic south pole and a copper bar
Due in a few minutes plzzzz help! Will mark brainliest
Answer:
1. 960
2. 16.6666
3. 0.41666666666
4. 10
Explanation:
A*V=W
A*120=50
V=I*R
R being resistance
(I'm not a 100% sure on 2 & 3)
HELLPPPPPPP FASTTTTBDJEJDJDJSJJWJWJW
How much gravitational energy does a 65 kg skydiver have 650 m up in the sky?
Answer:
G.P.E = 414050 Joules or 414.05 Kilojoules
Explanation:
Given the following data;
Mass = 65 kg
Height = 650 m
We know that acceleration due to gravity is equal to 9.8m/s²
To find the gravitational potential energy;
Gravitational potential energy (GPE) is an energy possessed by an object or body due to its position above the earth.
Mathematically, gravitational potential energy is given by the formula;
[tex] G.P.E = mgh[/tex]
Where;
G.P.E represents potential energy measured in Joules.m represents the mass of an object. g represents acceleration due to gravity measured in meters per seconds square. h represents the height measured in meters.Substituting into the equation, we have;
[tex] G.P.E = 65 * 9.8 * 650 [/tex]
[tex] G.P.E = 414050 [/tex]
G.P.E = 414050 Joules or 414.05 Kilojoules.
how does current flowing through a resistor affect the temperature
hi i need to pass this test im being timed please help
Answer:
C
Explanation:
A 100kg linebacker runs with a velocity of 5m/s towards an 88kg quarterback, who begins to back up
with a velocity of 2m/s to avoid being sacked
a.What is the momentum of the linebacker-quarterback system?
b.the quarterback is unsuccessful in evading the linebacker and gets sacked. what is the velocity of the football players just after the linebacker dives in for a tackle if the 2 players move as one clump?
NEED HELP A 400 Ω resistor is connected across 200 V. What current will flow?Single choice.
(2 Points)
0.25 A
0.5 A
2.0 A
4.0 A
Answer: 0.5A
Explanation:
According to Ohm's law, the Voltage(V) when a current flows through a resistor can be calculated by using the formula:
V = IR
where,
V = Voltage = 200V
I = current in amps (A)
R = resistance in ohms (Ω) = 400Ω
Current = Voltage / Resistance
I = V/R
I = 200/400
I = 0.5A
Therefore, the current is 0.5 Ampere
which instrument measure the intensity of sound
Answer:
Decibel Meter
A decibel meter is a measuring instrument used to assess noise or sound levels by measuring sound pressure. Often referred to as a sound pressure level (SPL) meter, decibel (dB) meter, noise meter or noise dosimeter, a sound level meter uses a microphone to capture sound.
Answer:
Decibel Meter
Explanation:
A decibel meter is a measuring instrument used to assess noise or sound levels by measuring sound pressure.
como te llamas?
(nom
Answer: como mi llamo yo?
Explanation: in rlf Maria
Answer:nai
Explanation:
True or False. Can Metalloids conduct electricity under certain conditions?
Answer:
Conduction: Some metalloids, such as silicon and germanium, can act as electrical conductors under the right conditions, thus they are called semi-conductors. Luster: Silicon for example appears lustrous, but is not malleable or ductile (it is brittle - a characteristic of some nonmetals).
Explanation:
No matter how well we get along with our parents as adolescents, there comes a time when we need to break away and assert our own independence. There are several ways in which we do this, some of them deliberate and intentional and some of them not so intentional. Describe several ways you use or have used to break away from your parents. Briefly describe your parents' reactions.
Answer: I never said anything to them but if i did it would be "I need a break from you, i love you but sometimes I have to find the path on my own." i would say this if i wasn't scared to hurt them.
Explanation:
A marble is dropped into a graduated cylinder that is filled with water. Use the words
from the word bank to describe the speed and forces. Words may be used more than
once.
Point A: Speed
force
A
Point B: Speed
force
ml
Point C: Speed
force
30
B
20
is constant
increases
decreases
balanced
unbalanced
C
Answer:
v_t = [tex]\frac{2 g \ ( \rho_b - \rho_l ) r^2 }{9 \ \eta }[/tex]
Explanation:
Let's describe the motion and forces on the marble when it falls into the graduated cylinder filled with water.
Initially, the marble in the air falls under the influence of its weight (gravity force), when it enters the water, a friction force appears that INCREASES with SPEED and opposes the movement, this force is called Stokes force.
Fr = 6π R η v
where η is the viscosity of water
also because of this in a liquid it has an upward thrust, given by Archimedes' law, this thrust is CONSTANT
B = ρ_l g V_l
in that case the volume of liquid(V_l) is equal to the volume of the marble.
Constant force of gravity
W = mg
using the concept of density
ρ_body = m / V
W = ρ_body g V_body
we apply Newton's second law
Fr + B - W = ma
the friction force increases and the other two are constant, so acceleration decreases until reaching zero, at this point the forces are in BALANCE
Fr + B - W = 0
and the speed remains constant, being called TERMINAL SPEED
v_t = [tex]\frac{2 g \ ( \rho_b - \rho_l ) r^2 }{9 \ \eta }[/tex]
from this point on, the displacement is proportional to the time
What is an important difference between nanotechnology and microtechnology?
Nanotechnology shows results of quantum mechanics, but microtechnology does not.
Microtechnology shows results of quantum mechanics, but nanotechnology does not.
Microtechnology is used to make products, but nanotechnology is not.
Nanotechnology is used to make products, but microtechnology is not.
Answer:
A) Nanotechnology shows results of quantum mechanics, but microtechnology does not.
Explanation:
Edge 21 test
The difference between nanotechnology and micro technology is nanotechnology shows results of quantum mechanics, but micro technology does not.
What are the differences between micro-technology and nanotechnology?Micro technology:
The technology that can be featured completely in a microscopic scale is known to be micro - technology. This technology that contribute to design, use components, devices that involves in small size. These were done significantly in smaller features.
Nanotechnology:
Nanotechnology is the field of applied science and technology that can be measured through nanoscale. Nanotechnology is helping to considerably improve, industry sectors - information technology, homeland security, medicine, transportation, energy, food safety, and environmental science, among many others.
Thus, Nanotechnology shows results of quantum mechanics but micro-technology does not. Option A is the correct answer.
Learn more about micro and nano technology,
https://brainly.com/question/24723558
#SPJ5
What kind of energy was used to move the toy car?
Answer:
kinetic energy
Explanation:
Motors change electrical energy into kinetic energy. The spinning movement of the motor is used to do work, for example, the wheels on a toy car.
Answer:
hope this works
Explanation:
Kinetic energy is defined as the energy of a moving object.
A thrown football, a speeding automobile, a marathon runner, or a rock falling from a cliff, are examples of objects that have kinetic energy.
Setting a time limit can help you achieve your goals. A. True B. False
Answer:
in my opinion i think is it a (true). Because it had helped my brother with school so i think it is true
Explanation:
Multiple Choice
Which is the best reason to be wary of those you talk to on the Internet?
A. They may not be who they say they are.
B. You don't know where they live.
C. You don't know their favorite foods.
D. They may not be in the same grade as you.
All matter is NOT composed of __________.
A. protons
B. neutrons
C. sodium
D. electrons
(CORRECT ANSWER ONLY)
Answer:
C.
Explanation:
Answer:C
Explanation:
A building is 512 m high. What must be the minimum water pressure in a pipe at ground level in order to get water up to a restaurant on the top floor? [3] (Density of water = 1000 kgm-3)
Answer:
The minimum pressure required to get water up to a restaurant on the top floor is 5.0176 x 10⁶ N/m²
Explanation:
Given;
height of the building, h = 512 m
density of water, ρ = 1000 kg/m³
The minimum pressure required to get water up to a restaurant on the top floor is calculated as follows;
P = ρgh
where;
P is the required minimum pressure
g is acceleration due to gravity = 9.8 m/s²
P = 1000 x 9.8 x 512
P = 5.0176 x 10⁶ N/m²
Therefore, the minimum pressure required to get water up to a restaurant on the top floor is 5.0176 x 10⁶ N/m²
A force of 20 newtons is used to much a box a distance of 2 meters. How much work was done?
Answer:
40 J
Explanation:
In the case of a rectilinear movement, the work is calculated as the product of Force (N) * movement (m). In your case, unless the angle between the force vector and the displacement vector is different from 0, the work is:
20 N * 2 m = 40 J
A 8.7kg cart travels down a 18.1m high hill. Determine the final kinetic energy if 100J of
energy is lost to friction.
Answer:
Explanation:
E = mgh
E(final) = E - friction
E(final) = 8.7 * 9.81 * 18.1 - 100 = 1444.8 J