PLEASE HELP ME IN THE QUESTION !!​

Answer:

Explanation:

The answer is chemical energy

Answer:

Explanation:

The light waves in the reflected sunlight are horizontally polarized, which illustrates that they oscillate at a [tex]90^o[/tex] angle related to a vertical line.

Depending on the condition of the height of the light, the glare can be almost entirely horizontally polarized. Furthermore, all reflections from over-water surfaces are partially polarized. The water becomes more translucent when using polarized sunglasses.

If polarized sunglasses are to be efficient against solar glare, the transmission axis should be positioned at an angle of [tex]\theta = 45^{o}[/tex]

Answer:

B-C

D-E

Explanation:

Trust

Answer:

B-C and D-E are correct

Explanation:

Wouldn't it be B because it's a majority pointing to it?

Sorry if i'm wrong.

Answer:

[tex]\mathbf{v_{ground} = \sqrt{{v^2+2ghb}}}[/tex]

Explanation:

From the information given:

The avg. velocity post the window is;

[tex]v_{avg} = \dfrac{L_w}{t}[/tex]

[tex]v_b[/tex] = velocity located at the top of the window

[tex]v_b[/tex] = velocity situated at the bottom of the window  

Using the equation of kinematics:

[tex]v_b = v_t + gt[/tex]

Hence,

[tex]v_t = v_b - gt[/tex]

To determine the average velocity as follows:

[tex]v_{avg} = \dfrac{1}{2} (v_t + v_b)\dfrac{L_w}{t}= \dfrac{1}{2}(v_b - gt +v_b) \\ \\\dfrac{L_w}{t} = v_b - \dfrac{1}{2}gt \\ \\ v_b = \dfrac{L_w}{t }+ \dfrac{1}{2} gt\\ \\ = \dfrac{1}{t} \Bigg(L_w + \dfrac{1}{2}gt^2 \Bigg) \\ \\[/tex]

where;

[tex]v_b[/tex] = velocity gained when fallen through the height h.

Similarly, using the equation of kinematics, we have;

[tex]v_b^2 = 2gh \\ \\h = \dfrac{v_b^2}{2g}[/tex]

[tex]\implies \dfrac{(L_w + \dfrac{1}{2} gt^2_^2}{2gt^2}[/tex]

Thus, the velocity at the ground is;

[tex]v^2_{grround} = v_b^2 + 2ghb[/tex]

[tex]\mathbf{v_{ground} = \sqrt{{v^2+2ghb}}}[/tex]

Answer:

Radio telescopes are LARGER than optical telescopes and this is because radio wavelengths  are much longer than optical wavelengths

Explanation:

In general radio telescopes are LARGER than optical telescopes and this is because radio wavelengths  are much longer than optical wavelengths.

The main difference between radio telescopes and other telescopes especially optical telescopes is based on size and wavelength of both telescopes  

Answer:

b. He is 8 years old

Explanation:

We will use Einstein's formula for time dilation, to calculate the age of Lee. Because Lee was traveling comparable to the speed of light, his age must be lesser than Leigh.

[tex]T = \frac{T_o}{\sqrt{1-\frac{v^2}{c^2} } }[/tex]

where,

T₀ = Time on Earth = ?

T = Relative Time = 10 years

v = relativistic speed of Lee = 0.714 c

c = speed of light = 3 x 10⁸ m/s

Therefore,

[tex]10\ years = \frac{T_o}{\sqrt{1-\frac{(0.714\ c)^2}{c^2} } } \\\\[/tex]

T₀ = 7 years

Hence, the age of Lee will be:

[tex]Lee's\ Age = 1\ year + 7\ years = 8\ years[/tex]

b. He is 8 years old

Answer:

d) Similar and joined in series

Explanation:

In a series combination of resistors, the current throughout the circuit remains the same, while the total voltage across the circuit is the sum of the voltage across each resistor connected in the circuit.

[tex]V_{Total} = V_{1}+V_{2}+V_{3}+...+V_{N}[/tex]

Now, if we consider that all the resistors are similar having rgw same value of resistance. So for the same value of resistance and current, the voltage drop across each resistor will also be the same.

[tex]V_{Total} = V+V+V+...+V(upto\ N\ resistors)\\V_{Total} = NV_{Resistor}\\V_{Resistor=}\frac{V_{Total}}{N}[/tex]

Hence, the correct option is:

d) Similar and joined in series

Answer:

C!

Explanation:

Cold fronts generally advance at average speeds of 20 to 25 mph. toward the east — faster in the winter than summer — and are usually oriented along a northeast to southwest line.

Answer:

I think not sure B sorry if this is wrong yay if im right

Explanation:

Answer:

E

Explanation:

Answer:

d

Explanation:

middle of a current carrying solenoid creates Mutual inductance

Answer:

D. all regions of the spectrum

Explanation:

I did some research ; )

Answer:

The net force is 0.

Explanation:

If I pull to the left with 400 N and you pull to the right with 400 N, we're going in opposite directions. If the left is negative (-400N) and the right is positive (+400N), add them to get the resultant force.

Answer:

Answer will be the 2nd one. I think it will be the Answer

Answer:

acceleration are

     hollow cylinder < hollow sphere < solid cylinder < solid sphere

Explanation:

To answer this question, let's analyze the problem. Let's use conservation of energy

Starting point. Highest point

          Em₀ = U = m g h

Final point. To get off the ramp

          Em_f = K = ½ mv² + ½ I w²

notice that we include the kinetic energy of translation and rotation

energy is conserved

        Em₀ = Em_f

        mgh = ½ m v² +1/2 I w²

angular and linear velocity are related

         v = w r

         w = v / r

we substitute

          mg h = ½ v² (m + I / r²)

          v² = 2 gh   [tex]\frac{m}{m+ \frac{I}{r^2} }[/tex]

          v² = 2gh    [tex]\frac{1}{1 + \frac{I}{m r^2} }[/tex]

this is the velocity at the bottom of the plane ,, indicate that it stops from rest, so we can use the kinematics relationship to find the acceleration in the axis ax (parallel to the plane)

         v² = v₀² + 2 a L

where L is the length of the plane

         v² = 2 a L

         a = v² / 2L

we substitute

         a = [tex]g \ \frac{h}{L} \ \frac{1}{1+ \frac{I}{m r^2 } }[/tex]

let's use trigonometry

         sin θ = h / L

we substitute

         a = g sin θ   \ \frac{h}{L} \  \frac{1}{1+ \frac{I}{m r^2 } }

the moment of inertia of each object is tabulated, let's find the acceleration of each object

a) Hollow cylinder

      I = m r²

we look for the acerleracion

      a₁ = g sin θ    [tex]\frac{1}{1 + \frac{mr^2 }{m r^2 } }[/tex]1/1 + mr² / mr² =

      a₁ = g sin θ    ½

b) solid cylinder

       I = ½ m r²

       a₂ = g sin θ  [tex]\frac{1}{1 + \frac{1}{2} \frac{mr^2}{mr^2} }[/tex] = g sin θ   [tex]\frac{1}{1+ \frac{1}{2} }[/tex]

       a₂ = g sin θ   ⅔

c) hollow sphere

     I = 2/3 m r²

     a₃ = g sin θ   [tex]\frac{1}{1 + \frac{2}{3} }[/tex]

     a₃ = g sin θ [tex]\frac{3}{5}[/tex]

d) solid sphere

     I = 2/5 m r²

     a₄ = g sin θ  [tex]\frac{1 }{1 + \frac{2}{5} }[/tex]

     a₄ = g sin θ  [tex]\frac{5}{7}[/tex]

We already have all the accelerations, to facilitate the comparison let's place the fractions with the same denominator (the greatest common denominator is 210)

a) a₁ = g sin θ ½ = g sin θ      [tex]\frac{105}{210}[/tex]

b) a₂ = g sinθ ⅔ = g sin θ     [tex]\frac{140}{210}[/tex]

c) a₃ = g sin θ [tex]\frac{3}{5}[/tex]= g sin θ       [tex]\frac{126}{210}[/tex]

d) a₄ = g sin θ [tex]\frac{5}{7}[/tex] = g sin θ      [tex]\frac{150}{210}[/tex]

the order of acceleration from lower to higher is

     a₁ <a₃ <a₂ <a₄

acceleration are

     hollow cylinder < hollow sphere < solid cylinder < solid sphere

Answer:

We can conclude by saying that in the beginning current will increase but after sometime, it becomes saturated.

Explanation:

Note: No information on change in number of electron generated.

Since there is a collision, the electrons emitted will not reach the collector at same time. As the voltage is increased, the the speed with which the electrons will reach the collector starts to increase. Due to this, electric current will first increases till all the emitted electrons reach the collector. Since we are not provided with the information that number of electrons generated are changing, after increasing voltage current will increase for some time and then reaches a saturated state.

We can conclude by saying that in the beginning current will increase but after sometime it becomes saturated.

The magnitude of the angular acceleration of the pendulum at the moment of release is; α = 18.45 rad/s²

We are given;

Mass of rod; m = 1 kg

Length of rod; L = 49.8 cm = 0.498 m

Mass of Disk; M = 4 kg

Radius of disk; r = 24.9 cm = 0.249 m

Let us first calculate the torque acting from the formula;

τ = mg(L/2) + MgL

Thus;

τ = (1 × 9.8 × (0.498/2)) + (4 × 9.8 × 0.498)

τ = 21.96 N.m

Using parallel axis theorem, we can find the moment of inertia about the given axis as;

I = (mL²/3) + ½MR² + ML²

Plugging in the relevant values gives;

I = (1 * 0.498²/3) + ½(4 * 0.249²) + (4 * 0.498²)

I = 1.19 kg.m²

The angular acceleration is given by the formula;

α = I/τ

α = 21.96/1.19

α = 18.45 rad/s²

Read more at; https://brainly.com/question/23321366

Answer:

the magnetic field experienced by the electron is 0.0511 T

Explanation:

Given the data in the question;

Wavelength λ = 21 cm = 0.21 m

we know that Bohr magneton μ[tex]_B[/tex] is 9.27 × 10⁻²⁴ J/T

Plank's constant h is 6.626 × 10⁻³⁴ J.s

speed of light c = 3 × 10⁸ m/s

protein spin causes magnetic field in hydrogen atom.

so

Initial potential energy = -μ[tex]_B[/tex]B × cos0°

= -μ[tex]_B[/tex]B × 1

= -μ[tex]_B[/tex]B

Final potential energy = -μ[tex]_B[/tex]B × cos180°

= -μ[tex]_B[/tex]B × -1

= μ[tex]_B[/tex]B

so change in energy will be;

ΔE = μ[tex]_B[/tex]B - ( -μ[tex]_B[/tex]B )

ΔE = 2μ[tex]_B[/tex]B

now, difference in energy levels will be;

ΔE = hc/λ

2μ[tex]_B[/tex]B = hc/λ

2μ[tex]_B[/tex]Bλ = hc

B = hc /  2μ[tex]_B[/tex]λ

so we substitute

B = [(6.626 × 10⁻³⁴) × (3 × 10⁸)]  /  [2(9.27 × 10⁻²⁴) × 0.21 ]

B = [ 1.9878 × 10⁻²⁵ ]  /  [ 3.8934 × 10⁻²⁴ ]

B = 510556326.09

B = 0.0511 T

Therefore, the magnetic field experienced by the electron is 0.0511 T

Answer:

atoms

Explanation:

Hormones are derived from amino acids or lipids. Amine hormones originate from the amino acids tryptophan or tyrosine. Larger amino acid hormones include peptides and protein hormones. Steroid hormones are derived from cholesterol.

There are different types of contact forces like normal Force, spring force, applied force and tension force.

Answer

t = 367.77 s = 6.13 min

Explanation:

According to the law of conservation of energy:

[tex]Heat\ Supplied\ By \ Heater = Heat\ Absorbed\ by\ Glass + Heat\ Absorbed\ by\ Water\\Pt = m_gC_g\Delta T_g + m_wC_w\Delta T_w\\[/tex]

where,

P = Electric Power of Heater =  300 W

t = time required = ?

m_g = mass of glass = 300 g = 0.3 kg

m_w = mass of water = 250 g = 0.25 kg

C_g = speicific heat of glass = 840 J/kg.°C

C_w =  specific heatof water = 4184 J/kg.°C

ΔT_g = ΔT_w = Change in Temperature of Glass and water = 100°C - 15°C

ΔT_g = ΔT_w = 85°C

Therefore,

[tex](300\ W)(t) = (0.3\ kg)(840\ J/kg.^oC)(85^oC)+(0.25\ kg)(4184\ J/kg.^oC)(85^oC)\\[/tex]

t = 367.77 s = 6.13 min

Answer: The wave B is just 10x larger

Explanation:

The wave produced by rapidly kicking his legs while seated on the edge of the pool is A while the wave produced by jumping into the Pool is B.

A wave is a disturbance along a medium which transmits energy. In this case, we have two scenarios. One generates a wave that can be shown with repeated patterns while the other generates a wave showing only one pattern.

As such, the wave produced by rapidly kicking his legs while seated on the edge of the pool is A while the wave produced by jumping into the Pool is B.

Learn more about waves:https://brainly.com/question/3639648

#SPJ2

Answer:

1: A

Explanation:

Answer:

-22.3

Explanation:

Acellus

The net force on particle q2 is 21.7 N.

The given parameters:

The net force on particle q2 is calculated as follows;

[tex]Q_2_{net} = q_{12} \ + \ q_{23}\\\\Q_2_{net} = \frac{kq_1q_2}{r_{12} ^2} \ + \ \frac{kq_2q_3}{r_{23}^2} \\\\Q_2_{net} = \frac{9\times 10^9 \times 8 \times 10^{-6} \times 3.5 \times 10^{-6} }{0.1^2} \ + \ \frac{9 \times 10^9 b\times 3.5 \times 10^{-6} \times (-2.5) \times 10^{-6} }{0.15^2} \\\\Q_2_{net} = 25.2 \ N \ - \ 3.5 \ N\\\\Q_2_{net} = 21.7 \ N[/tex]

Thus, the net force on particle q2 is 21.7 N.

Learn more about Coulomb's law here: https://brainly.com/question/24743340

Answer: [tex]278\ Hz[/tex]

Explanation:

Given

Distance between two speakers is 8 m

Man is standing 12 away from the wall

When the person moves 3 parallel to the wall

the parallel distances from the speaker become 4+3, 4-3

Now, the difference of distances from the speaker is

[tex]\Delta d=\sqrt{12^2+(4+3)^2}-\sqrt{12^2-(4-3)^2}\\\Delta d=1.85\ m[/tex]

Condition for destructive interference is

[tex]\Delta d=(2n-1)\dfrac{\lambda }{2}=(2n-1)\dfrac{\nu }{2f}\\\\\Rightarrow f=(2n-1)\dfrac{v}{2\Delta d}[/tex]

for second destructive interference; n=2

[tex]\Rightarrow f=(2\times 2-1)\dfrac{343}{2\times 1.85}=278.10\approx 278\ Hz[/tex]

Answer: Computed tomography (CT) is an imaging tool that combines x-rays with computer technology to produce a more detailed, cross-sectional image of your body. A CT scan lets your doctor see the size, shape, and position of structures that are deep inside your body, such as organs, tissues, or tumors.

So, the answer must be a CT scan. I may be wrong.

Answer:

B. CT SCAN

Explanation:

Edge 2021