please help me thank youuuu !!!!

Answer:

The correct answer is true.

Answer:

Get out if the car

Explanation:

Get out of the car because the car could explode by over eclectic power

get out of the car as fast as possible

Answer:

300 Hz.

Explanation:

The frequency of a sound wave is the same as that of the source. For example, a tuning fork vibrating at a given frequency would produce sound waves that oscillate at the same frequency.

The frequency that you will hear when the tuning fork is stuck against a table is 300 Hz.

Frequency is a measurement of how often a repetitive event occurs in a given amount of time. It is commonly used to describe the rate at which waves oscillate or vibrate. The unit of frequency is hertz (Hz), which represents the number of cycles or oscillations per second.

For example, in the case of sound waves, frequency is related to the pitch of the sound. Higher frequency sound waves have a higher pitch, while lower frequency sound waves have a lower pitch. Similarly, in the case of electromagnetic waves such as light, frequency is related to the color of the light. Higher frequency electromagnetic waves correspond to colors such as blue and violet, while lower frequency electromagnetic waves correspond to colors such as red and orange.

The relationship between frequency, wavelength, and the speed of the wave is given by the formula:

frequency = speed of the wave / wavelength

This formula shows that the frequency of a wave is inversely proportional to its wavelength, assuming the speed of the wave remains constant. In other words, as the wavelength of a wave increases, its frequency decreases, and vice versa.

Frequency is an important concept in many fields, including physics, engineering, and communications. It is used to describe and analyze a wide range of phenomena, from the behavior of sound and light waves to the performance of electronic circuits and systems.

Here in the Question,

When a tuning fork is struck against a table, it vibrates at its natural frequency, which is determined by its physical properties such as its mass, shape, and material. The vibration of the tuning fork creates sound waves that travel through the air, and our ears perceive these waves as sound.

The frequency of the sound that we hear depends on the frequency of the sound waves that reach our ears. When the sound waves from the tuning fork travel through the air, they undergo a phenomenon called the Doppler effect, which causes the frequency of the sound waves to change depending on the relative motion between the source of the sound waves (the tuning fork) and the observer (our ears).

If the tuning fork is stuck against a table and is not moving relative to the observer, the frequency of the sound waves that reach our ears will be the same as the natural frequency of the tuning fork, which is given as 300 Hz in this case.

Therefore, the frequency that you will hear when the tuning fork is stuck against a table is 300 Hz.

To learn more about Frequency click:

brainly.com/question/1292129

#SPJ2

Answer:

Her target Heart rate is maybe around 141-172.

Explanation:

hope this is helpful!

Answer:

A

Explanation:

Answer:

Their velocity is 0m/s because the first box was only 10 kg and the second box was double the weight

Answer:

Yess it’s resistance

Explanation:

Answer:

DECRAAAASESSSS

Explanation:

Answer:

The final velocity of the vehicle is 10.39 m/s.

Explanation:

Given;

acceleration of the vehicle, a = 2.7 m/s²

distance moved by the vehicle, d = 20 m

The final velocity of the vehicle is calculated using the following kinematic equation;

v² = u² + 2ah

v² = 0 + 2 x 2.7 x 20

v² = 108

v = √108

v = 10.39 m/s

Therefore, the final velocity of the vehicle is 10.39 m/s.

Answer:

The JB-9 carries 4.5 kilograms (10 lb) of kerosene fuel that burns through two vectored thrust AMT Nike jet engines at a rate of 3.8 litres (1 US gallon) per minute for up to ten minutes of flying time, depending on pilot weight.

Explanation:

Answer:

The forces of gravity

Explanation:

Newton's third law states that for every action, there is an equal and opposite reaction. In this case, the jetpack is ejecting water at high velocity toward the ground. This is generating a significant force downward. The resulting opposite force pushes upward, elevating the rider.

Answer:

The output work is always less than the input work because some of the input work is used to overcome friction. Therefore, the efficiency is always less than 100 percent.

Answer:

he affirmations the correct ones are: A and D

Explanation:

To find out which expressions are correct, let's calculate the work and power done by each person

the expression for work is W = F and

the expression for power is P = W / t

In this case the work is positive because the beast is in the same direction of displacement.

Ted

        W₁ = 10 1.5

        W₁ = 15 J

        P₁ = 15/1

        P₁ = 15 w

Johnny

the job

         W₂ = 10 1.5

         W₂ = 15 J

the potential

          P₂ = 15/2

          P₂ = 7.5 w

therefore we see that the work of both is the same, but Ted developed twice as much power as Johnny

when resisting the affirmations the correct ones are: A and D

Answer:

que tue nesisitas

Explanation:

Answer:

2.8 × 10^-11 C

Explanation:

The computation of the magnitude of q is shown below;

The electric field at point P because of point charge Q is provided by,

E = 8.6 × 10^-2 N/C

And, the separation between charge Q and P is r = 1.7m

Now According to the Coulomb's law,

E = kQ ÷ r²

8.6 × 10^-2 = 9 × 10^9 × Q ÷ (1.7)²

8.6 × 10^-2 × 2.89 ÷ 9 × 10^9 = Q

Q = (8.6 × 2.89 ÷ 9) × 10^-11

Q = 2.76 × 10^-11 C

= 2.8 × 10^-11 C

Answer:

so as to over come the repulsion between the protons in nuclei that join

Explanation:

it requires high temperature so that the nucleus starts moving at rapid speed which in turn increases their kinetic

In nuclear reactions,  very high temperatures and pressures required for fusion to occur so as to to overcome the repulsion between the protons in the nuclei that join.

There are two types of nuclear reactions which are nuclear fusion and nuclear fission .They involve the combination and disintegration of the element's nucleus respectively.

In nuclear fission, the nucleus of the atom is bombarded with electrons of low energy which splits the nucleus in to two parts .Large amount of energy is released in the process.It is used in nuclear power reactors as it produces large amount of energy.

In nuclear fusion,on the other hand, is a reaction which occurs when two or more atoms combine to form a heavy nucleus.Large amount of energy is released in the process which is greater than that of the energy which is released in nuclear fission process.

Learn more about nuclear reactions,here:

https://brainly.com/question/16526663

#SPJ7

Answer:

a person walking on a flat side walk

Explanation:

hope this helped :)

Answer:

turning

Explanation:

because the moment of a force is for pivots

the moment of a force can be clockwise motion and anti clockwise motion

hope this helps

Answer:

Given

mass (m) =45kg

velocity (v) =15m/s

momentum (p) =?

Form

p=mv

=45x 15

p=675kg.m/s

the momentum =675kg.m/s

Answer:

if this is true or false, its true i think (not 100% sure)

Explanation:

Answer: If mass remains constant and you double the force you will double the acceleration.

Answer:

1.75 [tex]m/s^{2}[/tex]

Explanation:

Acceleration = [tex]\frac{Final velocity-Initial velocity}{Time}[/tex]

= [tex]\frac{10 - 3}{4}[/tex]

= [tex]\frac{7}{4}[/tex]

= 1.75 [tex]m/s^{2}[/tex]

Answer:

5

Explanation:

100 newtons pulling a 500 newton object has the mechanical advantage of 5 since it pulled 5x its weight

the expression is simple: 500/100= 5 (5 is the mechanical advantage)

pls mark me brainliest if this is right lol ty

Answer:

8?

Explanation:

Answer:

neither fell first because they both fell with the same gravitational pull

Explanation:

Answer:

It's letter D. It doesn't matter because our temperature changes because of the Earth tilts on its axis

b interpolate loskkdkskmdrmdr