Answer:
the correct answer is option A. decrease
Select the correct mass for each of the samples described below.
3.01 × 1023 molecules H2O
Answer:
9.00 g H2O
Explanation:
Convert molecules to grams using stoichiometry
(3.01 * 10^23 molecules) * (1 mole H2O / 6.022 * 10^23 molecules) * (18.01 g / 1 mole H2O) = 9.00 g H2O
Answer:
answer in picture
Explanation:
You throw a barbeque for your friends. Before you start the grill, your propane tank has a pressure of 78 psi. When you’re finished grilling, the temperature is 95°F and the propane tank reads 74 psi. Come nighttime the outside temperature drastically decreases to 20°C. What is the pressure of the propane tank at night?
Select one:
a. 16 kPa
b. 485 kPa
c. 107 kPa
d. 2300 kPa
Answer:
b. 485 kPa
Explanation:
Gay-Lussac's law express that the pressure of a gas under constant volume is directly proportional to the absolute temperature. The equation is:
P1T2 = P2T1
P is pressure and T absolute temperature of 1, initial state and 2, final state of the gas
Where P1 = 74psi
T2 = 20°C + 273.15 = 293.15K
P2 = ?
T1 = (95°F -32) * 5/9 + 273.15 = 308.15K
Replacing:
74psi*293.15K = P2*308.15K
70.4psi
In kPa:
70.4psi * (6.895kPa / 1psi) =
b. 485 kPaClouds are made up of tiny droplets of water. Which two spheres are clouds a
part of?
A. Biosphere
B. Geosphere
C. Hydrosphere
D. Atmosphere
Which of the following is not an ionic compound
Answer:
bR2 since it is nonpolar
Which of the following best explains the relationship between peak to peak amplitude and semi amplitude
Answer:
Which of the following best explains the relationship between peak-to-peak amplitude and semi-amplitude? Semi-amplitude is half the distance of the peak-to-peak amplitude. Semi-amplitude is the same distance as the peak-to-peak amplitude.
Type the correct answer in the box. Express your answer to three significant figures. Iron(II) chloride and sodium carbonate react to make iron(II) carbonate and sodium chloride: FeCl2(aq) + Na2CO3(s) → FeCO3(s) + 2NaCl(aq). Given 1.24 liters of a 2.00 M solution of iron(II) chloride and unlimited sodium carbonate, how many grams of iron(II) carbonate can the reaction produce? The reaction can produce grams of iron(II) carbonate.
Answer:
The reaction can produce 287 grams of iron(II) carbonate
Explanation:
To solve this question we must find the moles of iron(II) chloride that react. Using the chemical equation we can find the moles of iron(II) carbonate and its mass -Molar mass FeCO3: 115.854g/mol-
Moles FeCl2:
1.24L * (2.00mol / L) = 2.48 moles FeCl2
As 1 mol FeCl2 produce 1 mol FeCO3, the moles of FeCO3 = 2.48 moles
Mass FeCO3:
2.48mol * (115.854g / mol) =
The reaction can produce 287 grams of iron(II) carbonateAnswer:
287
Explanation:
24.
What is the molar mass of CO2?
Answer:
The molecular mass of carbon dioxide is 44.01amu
Most types of commercial flour are sifted
before they are packaged and sold in the
store. What effect do you think this has
on the quality of the flour?
Answer:
It improves the texture of the flour
Explanation:
Flour is supposed to have a very fine texture. Commercial flour is not expected to occur in lumps. Lumps reduce the utility of the flour.
Hence, to improve the texture of the commercial flour, it is thoroughly sifted to ensure that there are no large lumps in the flour.This is so important when producing cake flour where the achievement of fine texture is of utmost priority.
PLZZ HELP WILL MARK AS BRAINLIESTTT!!!!!
Answer:
The object is moving with uniform acceleration
Explanation:
Acceleration is defined as the change of speed with time. Hence, we define acceleration as ds/dt.
The slope of a speed/time graph gives us the acceleration of the moving object.
An object is said to move with uniform acceleration when the speed increases by equal amounts in equal time intervals as in the straight line speed/time graph shown in the question
What is the empirical formula of a compound containing 90 grams carbon, 11 grams hydrogen, and 35 grams nitrogen? (5 points)
Question 3 options:
1)
C3H4N
2)
C2H4N
3)
C4H10N
4)
C2H5N
Answer:
1) C₃H₄N
Explanation:
The empirical formula of a compound is the formula that gives the positive integer ratio of the atoms of the elements in the compound in the simplest form
The mass of carbon in the compound = 90 grams
The molar mass of carbon = 12.011 g/mol
The number of moles of carbon = 90 g/(12.011 g/mol) ≈ 7.4931313 moles
The mass of hydrogen in the compound = 11 grams
The molar mass of hydrogen = 1.00794 g/mol
The number of moles of carbon = 11 g/(1.00794 g/mol) ≈ 10.913348 moles
The mass of nitrogen in the compound = 35 grams
The molar mass of nitrogen = 14.0067 g/mol
The number of moles of carbon = 35 g/(14.0067 g/mol) ≈ 2.49880414 moles
Dividing by the smallest mole ratio gives;
The proportion of carbon, C = 7.4931313/2.49880414 = 2.9987 ≈ 3
The proportion of nitrogen, N = 10.913348 /2.49880414 = 4.367 ≈ 4
The proportion of nitrogen, N = 2.49880414 /2.49880414 = 1
Therefore, the empirical formula of the compound is C₃H₄N.
Answer:
1) C₃H₄N
Explanation:
took test
A student finds that the water's temperature went from 18oC to 38oC. Calculate how many calories are in the peanut.
Answer:
567 calories.
Explanation:
There 567 calories in 100 grams of peanut. In 100 grams of peanut, 49 gram is the fat, 26 grams of protein, 16 grams of carbohydrates, Sodium is 18 mg, Potassium is 705 mg. Calcium is present in peanut about 9%, Iron is 25% , Vitamin B-6 is 15% and Magnesium is 42% of their total weight. Oil content is high in the Peanut so this is the reason for high calories in peanut. It is a good source of proteins and potassium.
please help science question ! thank you have a great day
Answer:
The particle theory states that the particles of a substance spread out as they gain energy when heated. Thus, the particles take up more space, which means that the density of the substance decreases. It is almost always true that, for each pure sub stance (for example, gold), the density of its solid state is greater than the density
Explanation:
Which pH is the most acidic
Answers choices below
A. 7
B. 14
C. 0.5
D . 1
C. 0.5
This is the answer.
(assuming that the D option is 1, if it is 0.1 then the answer is 0.1)
[tex]0.5[/tex]
Explanation:
As you know that decreasing in the concentration of OH- (i.e., 14, 13, 12, 11,..) makes to increase in the concentration of H+ ions (5,4,3,2,1).
Someone pls help i am being timed!!!!
Answer:
i think it is a the full moon
Explain the volume of ideal gasses as related to the molar concept.
Answer:
n = Initial volume/22.4L
Explanation:
The molar concept is simply one that is used to find the Number of moles and explain the relationship it has with avogadro's number, molecular mass, molar mass e.t.c.
Now, in terms of molar mass, number of moles is given by the formula;
n = mass of the sample/molar mass
In terms of avogadro's number, number of moles is;
1 mole = avogadro's number = 6.02 × 10^(23)
Now, when dealing with ideal gases, the molar volume of an ideal gas is 22.4 L.
Now the relationship between this volume and the mole concept is that the number of moles is gotten by dividing the initial volume by this molar volume.
Thus;
n = Initial volume/22.4L
Which of the following is not a renewable source of energy?
1.) geothermal
2.) coal
3.) solar
4.) wind
2. Coal
It is non renewable energy source.
Answer: the answer would be coal
Explanation: hoped this helped!
URGENT: Identify the subatomic particles that determine the atomic number of an element.
Answer:
the number of protons determines the atomic number
Explanation:
Ex. Aluminum has 13 protons, so it's atomic number is 13
hope this helps :)
Suppose you will determine the composition of the unknown substance that was collected at the scene of the crime. You are encouraged to work on this case. You can perform a series of tests on the unknown substance and compare results of the same tests performed on known samples. Follow these steps:
List physical properties you can use as a simple method of identifying substances.
Describe how you can use density to help identify unknown substances.
Explain how forensic chemist can help you identify unknown substances.
How important is comparing tests results of know substances in a lab setting?
Answer:
b erergart
Explanation:
Your simulation involved 100 atoms and eight half-life cycles. For half-life cycles 9 and later, how many radioactive nuclei would you expect to be present?
Answer:
you would expect 0 radioactive nuclei to be present
Explanation:
got it right on the assignment
Choose ALL
BIOTIC factors
Lesson 5.01
Question 1 options:
protists
animals
fungi
plants
salinity
Answer:
protists
animals
fungi
plants
Explanation:
i took the test let me know if im wrong tho
The biotic factors from the following options are protist, animals, fungi, and plants. Options A, B, c, and D are correct.
What are biotic factors?Biotic factors are those factors which can grow, and reproduce themselves.
Plants, animals, protists, and fungi are biotic factors that live, eat ad reproduce.
Salinity is the quality of any solution. It is not a biotic factor.
Thus, the correct options are A, B, c, and D.
Learn more about biotic factors
https://brainly.com/question/27430655
#SPJ2
What would be the temperature change if 3.0 g of water absorbed 15 J of heat? Specific Heat capacity of water= 4.18 J/gºC
Question 19 options:
a
None of the above
b
2.4 ºC
c
1.2 ºC
d
15 ºC
5) answer is A
2NaHCO3(s) + 129k) - Na2CO3(s) + H2(g) + CO2(g)
This equation indicates that AH is
and energy must be
to complete the reaction.
A)
positive; added
B)
negative; added
C)
positive; released
D)
negative; released
Answer:
A) positive; added
Explanation:
Based on the reaction:
2NaHCO3(s) + 129kJ → Na2CO3(s) + H2(g) + CO2(g)
2 moles of NaHCO3 requires 129kJ to produce 1 mole of Na2CO3, 1 mole of H2 and 1 mole of CO2.
That means, the energy must be added being, thus, an exothermic reaction. The exothermic reactions have ΔH >0.
Thus, right answer is:
A) positive; added
Can someone help me with these??
Answer: let me see I gotta do the work first then I’ll give you the answers
Explanation:
Who goes to K12 and if so what grade
Answer:
I do. I am in tenth. What area are you in?
Explanation:
Answer:
8th finna be in 9th wbu
Explanation:
A loose pile of rocks and soil travels in a single large mass the mass moves a short distance downhill which mass movement does this describe
A. Creep
B. Erosion
C. Landslide
D. Slump
During a reaction, H for reactants is -750 kJ/mol and H for products is 920 kJ/mol. Which statement is correct about the reaction and correctly compares the energy in bonds?
Answer:
a
Explanation:
the ones are stronger and herder to break so it will take more energy to break them then when they are made
The statement, that describes the reaction and correctly compares the energy in bonds from the given ΔH values is "It's endothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed."
What is ΔH?The quantity of energy evolved during a chemical reaction is represented by ΔH, also known as enthalpy change.
An exothermic reaction is a chemical reaction in which heat energy is emitted. The value of ΔH is always negative in exothermic processes. An endothermic reaction is a chemical reaction that absorbs heat energy. The value ΔH of is always positive for endothermic reactions.
When the bonds in the reactants are broken, more energy is absorbed than is released when new bonds are created in the products, therefore the value of ΔH is always positive in endothermic reactions.
Hence the correct option is endothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed.
Learn more about ΔH here
https://brainly.com/question/16420084
#SPJ2
which of the following examples where molecules are slightly far apart
A.rock
B.water
C.smoke
D.plasma ball
Answer:
in my opinion I think is D you don't have to choose it
Al+3 and I-
what is the chemical formula and what is the name of the compound
Answer:
AlI3 is the chemical formula and the name of compound is Aluminium iodide.
What is the volume of 0.150 M sodium hydroxide, required to react completely with 250.0 mL of 0.545 M acetic acid, CH3COOH solution?
Answer:
68.81ml
Explanation:
Using the formula:
CaVa = CbVb
Where;
Ca = concentration of acid (M)
Cb = concentration of base (M)
Va = volume of acid (ml)
Vb = volume of base (ml)
Based on the information given in this question;
Ca = 0.545M
Cb = 0.150M
Va = 250ml
Vb = ?
Using CaVa = CbVb
0.545/250 = 0.150/Vb
Cross multiply
250 × 0.150 = 0.545Vb
37.5 = 0.545Vb
Vb = 37.5/0.545
Vb = 68.81ml
A substance conducts electricity because of free moving, charged particles.
What are the free moving, charged particles in a:
• carbon electrode (made from graphite)
• molten mixture of aluminium oxide and cryolite
• metal wire?
Answer:
105Comprendes las leyes de la electricidadAprende másClasificación de los materialesUn medio o material que permite el movimiento de las cargas eléctricas (electrones) en respuesta a una fuerza eléctrica, se denomina conductor. Los materiales conductores son los que se pueden electrizar en toda su superficie, debido a que los electrones se mueven libremente. Los metales por lo general son buenos conductores de la electricidad.El flujo de las partículas cargadas es lo que se conoce como corriente eléctrica. Las partículas cargadas en una cierta dirección de un conductor chocan con los átomos, produciendo una pérdida de energía que se manifiesta en forma de calor.Una medida de oposición que presentan las partículas cargadas al moverse libre-mente en una cierta dirección de un material conductor es lo que se conoce como resistencia eléctrica.Los materiales que no permiten que las partículas cargadas se muevan hacia otra región del material a una fuerza eléctrica, son llamados aislantespor ejemplo, la madera.Existen otros tipos de materiales cuyas propiedades son intermedias entre los conductores y aislantes; se llaman semiconductores.Algunos ejemplos de materiales con estas características son:
Explanation: