Answers
The number of people expected to go to the Youth Wing, would be 255 people.
How to find the people ?Find the total amount of people who will be visiting on Saturday:
= 382 ( Youth Wing ) + 461 ( Social Issues ) + 355 ( Fiction and Literature )
= 1, 198
Then the proportion of those who went to Youth Wing :
= 382 / 1, 198
= 0. 319
The estimated people going for Youth Wing on Sunday :
= 0. 319 x 800
= 255 people
In conclusion, an estimated 255 people would be going to Youth Wing.
Find out more on people at https://brainly.com/question/23477098
#SPJ1
Related Questions
If r = 4 units and h = 8 units, what is the volume of the cylinder shown above? Use 3.14 for pi.
Answers
Answer: 401.92
Step-by-step explanation:
V=πr^2h
=π(4^2)(8)
=π(16)(8)
=π128
=401.92
Hope this helps! :)
4. Consider an MA(1) process for which it is known that the process mean is zero. Based on a series of length n = 3, we observe Y, = 0, y = -1, and Y3 = 1/2. (a) Show that the conditional least-square
Answers
The forecast for Y3 is -3/8.
We can start by writing the MA(1) process as:
Yt = μ + θεt-1 + εt
where μ is the process mean, θ is the MA(1) coefficient, εt is the white noise error term with mean zero and variance σ^2.
From the given information, we know that the process mean is zero, so μ = 0.
The conditional least-squares estimate of θ given the first two observations can be obtained by minimizing the sum of squared errors:
S(θ) = (y1 - θε0)^2 + (y2 - μ - θε1)^2
where ε0 and ε1 are unobserved error terms and y1, y2 are the first two observations.
Substituting the given values, we get:
S(θ) = 1 + θ^2 + (1/4 - θ)^2
Taking the derivative of S(θ) with respect to θ and setting it to zero, we get:
dS(θ)/dθ = 2θ - 2(1/4 - θ) = 0
Solving for θ, we get:
θ = 3/8
Therefore, the conditional least-squares estimate of θ given the first two observations is 3/8.
To find the forecast for Y3, we can use the MA(1) model equation:
Y3 = μ + θε2 + ε3
where ε2 and ε3 are unobserved error terms. Substituting the estimated value of θ and the given value of Y2, we get:
Y3 = (3/8)(-1) + ε3 = -3/8 + ε3
Therefore, the forecast for Y3 is -3/8.
To learn more about unobserved visit:
https://brainly.com/question/28482601
#SPJ11
Let C be the circle relation defined on the set of real numbers. For every X. YER,CY x2 + y2 = 1. (a) Is Creflexive justify your answer. Cis reflexive for a very real number x, XCx. By definition of this means that for every real number x, x2 + x? -1. This is falsa Find an examplex and x + x that show this is the case. C%. X2 + x2) = X Since this does not equal1, C is not reflexive (b) is symmetric? Justify your answer. C is symmetric -- for all real numbers x and y, if x Cytheny Cx. By definition of C, this means that for all real numbers x and y, if x2 + y2 - 1 y + x2 - 0 This is true because, by the commutative property of addition, x2 + y2 = you + x2 for all symmetric then real numbers x and y. Thus, C is (c) Is Ctransitive? Justify your answer. C is transitive for all real numbers x, y, and 2, if x C y and y C z then x C 2. By definition of this means that for all real numbers x, y, and 2, if x2 + y2 = 1 and 2 + 2 x2 + - 1. This is also. For example, let x, y, and z be the following numbers entered as a comma-separated list. - 1 then (x, y, z) = = Then x2 + y2 = 2+z? E and x2 + 2 1. Thus, cis not transitive
Answers
The circle relation C defined on the set of real numbers is not reflexive and transitive but it is symmetric.
(a) C is not reflexive. To be reflexive, for every real number, xCx must hold true, meaning [tex]x^{2} + x^{2}[/tex]= 1. This is false. For example, let x=0. In this case, [tex]x^{2} + x^{2}[/tex] = 0, which does not equal 1. Therefore, C is not reflexive.
(b) C is symmetric. If xCy then yCx, for all real numbers x and y. If we see the definition of C, this means that if [tex]x^{2} + y^{2}[/tex] = 1, then [tex]y^{2} + x^{2}[/tex] = 1. This is true due to the commutative property of addition ([tex]x^{2} + y^{2} = y^{2} + x^{2}[/tex] for all real numbers x and y). Thus, C is symmetric.
(c) C is not transitive. To be transitive, if xCy and yCz, then xCz must hold true for all real numbers x, y, and z. This means that if [tex]x^{2} + y^{2}[/tex] = 1 and [tex]y^{2} + z^{2}[/tex] = 1, then [tex]x^{2} + z^{2}[/tex]must equal 1. This is not always true. Let's take an example (x, y, z) = (1, 0, -1). Then [tex]x^{2} + y^{2}[/tex] = 1, [tex]y^{2} + z^{2}[/tex]= 1, but [tex]x^{2} + z^{2}[/tex] = 2, not 1. Thus, C is not transitive.
To learn more about reflexive;
https://brainly.com/question/29119461
#SPJ4
1 (a) Rory pushes a box of mass 2.8 kg across a rough horizontal floor against a resistance of 19N. Rory applies a constant horizontal force. The box accelerates from rest to 1.2ms as it travels 1.8m. a) Calculate the acceleration of the box. [2]
b) find the magnitude of the force that Rory applies [2]
Answers
The acceleration of the box is 0.4 m/s².
The magnitude of the force that Rory applies is 20.12 N.
(a)
The acceleration of the box can be calculated using the formula:
[tex]a = (v_f^2 - v_i^2) / (2d)[/tex]
where vf is the final velocity, vi is the initial velocity, and d is the distance traveled.
Substituting the given values, we get:
a = (1.2² - 0²) / (2 x 1.8)
a = 0.4 m/s²
(b)
To find the magnitude of the force that Rory applies, we can use Newton's second law, which states that the net force on an object is equal to its mass times its acceleration:
F(net) = ma
The resistance force is acting in the opposite direction to the force applied by Rory.
F(applied) - F(resistance) = ma
Substituting the given values.
F(applied) - 19 = 2.8 x 0.4
F(applied) = 19 + 1.12 = 20.12 N
Therefore, the magnitude of the force that Rory applies is 20.12 N.
Thus,
The acceleration of the box is 0.4 m/s².
The magnitude of the force that Rory applies is 20.12 N.
Learn more about force here:
https://brainly.com/question/30526425
#SPJ1
Which lists contain only rational numbers? Select all that apply
Answers
Answer:
The answer is the fourth option.
Step-by-step explanation:
The reason is that when a number has the line above it means it is continuous which is the meaning of rational numbers.
What is the vertex of the quadratic function below
Answers
Solve #3 using the quadratic formula
Answers
The value of x in the equation 2x² + 10x + 12 = 0 is -2 and -3.
How to solve an equation?An equation is an expression that can be used to show the relationship between two or more numbers and variables using mathematical operators.
The standard form of a quadratic equation is:
ax² + bx + c = 0
The quadratic formula is given by:
[tex]x=\frac{-b\pm\sqrt{b^2-4ac} }{2a} \\\\Given\ the\ equation\ 2x^2+10x+12=0:\\\\a=2;b=10;c=12\\\\x=\frac{-b\pm\sqrt{b^2-4ac} }{2a} \\\\substituting:\\\\x=\frac{-10\pm\sqrt{10^2-4(2)(12)} }{2(2)} \\\\x=-3; and\ x=-2\\[/tex]
The value of x is -2 and -3.
Find out more on equation at: https://brainly.com/question/2972832
#SPJ1
what is the Mean, Median, Mode, and range for 53, 13, 34, 41, 26, 61, 34, 13, 69
Answers
Arrange the data in an ascending order and the median is the middle value. If the number of values is an even number, the median will be the average of the two middle numbers.
median: 34
The mode is the element that occurs most in the data set. In this case, 13, 34 occurs 2 times.
mode: 13, 14
The mean of a set of numbers is the sum divided by the number of terms.
mean: 38.2
Subtract the minimum data value from the maximum data value to find the data range. In this case, the data range is
69−13=56.
Range: 56
Q1. Table 1.1 shows the classification of underweight, fit and overweight status according to BMI for 300 students in a college. Table 1.1 Underweight (A) Fit (B) 43 135 24 77 Male (M) Female (F) Overweight (C) 17 4 (b) Determine whether the events "a selected student is underweight" and "a selected student is male" are independent. Justify your answer. (3 marks) [Total : 10 marks]
Answers
To determine if the events "a selected student is underweight" (A) and "a selected student is male" (M) are independent, we need to check if the probability of both events occurring together is equal to the product of the probabilities of each event occurring individually.
Step 1: Calculate the probabilities of each event individually.
P(A) = P(Underweight) = (43 + 24) / 300 = 67 / 300
P(M) = P(Male) = (43 + 17) / 300 = 60 / 300
Step 2: Calculate the probability of both events occurring together.
P(A ∩ M) = P(Underweight and Male) = 43 / 300
Step 3: Check if P(A ∩ M) = P(A) * P(M)
(67 / 300) * (60 / 300) ≠ 43 / 300
Since the probabilities are not equal, the events "a selected student is underweight" and "a selected student is male" are not independent.
Learn more about probability :
https://brainly.com/question/30034780
#SPJ11
Most fish and shellfish contains traces of mercury, which can be harmful to the health of people (especially young children) if they eat too much of it. The FDA wanted to investigate whether Albacore tuna typically contains more mercury than canned tuna. Canned tuna is known to contain an average of 0.126 parts per million (ppm) mercury. In a sample of 43 specimens of Albacore tuna, the average mercury level was 0.358 ppm with a standard deviation of 0.138 ppm. A histogram of the data was slightly skewed. a. If we want to compute a p-value for a test of whether the mean mercury content of Albacore tuna is greater than 0.126 ppm, which of the following methods is appropriate? O A. T-test O B. 2-Prop Z Test O C. 1-Prop Z Test O D. None of the above b. Find a theory-based p-value for this study. Enter your answer accurate to at least 3 non-zero digits.
Answers
The null hypothesis and conclude that the mean mercury content of Albacore tuna is greater than 0.126 ppm.
(a) The appropriate method to compute a p-value for a test of whether the mean mercury content of Albacore tuna is greater than 0.126 ppm is a t-test because the sample size is less than 30 and the standard deviation of the population is unknown.
(b) The null hypothesis for this study is that the mean mercury content of Albacore tuna is equal to 0.126 ppm, and the alternative hypothesis is that the mean mercury content is greater than 0.126 ppm.
To find the theory-based p-value, we can use the t-distribution with 42 degrees of freedom (43-1). The test statistic is:
t = (x - μ) / (s / sqrt(n))
where x is the sample mean (0.358 ppm), μ is the hypothesized population mean (0.126 ppm), s is the sample standard deviation (0.138 ppm), and n is the sample size (43).
Substituting the values, we get:
t = (0.358 - 0.126) / (0.138 / sqrt(43)) = 10.29
Using a t-table or calculator, the p-value for a one-tailed test with 42 degrees of freedom and a test statistic of 10.29 is less than 0.001. Therefore, we can conclude that there is strong evidence to reject the null hypothesis and conclude that the mean mercury content of Albacore tuna is greater than 0.126 ppm.
To learn more about hypothesized visit:
https://brainly.com/question/18064632
#SPJ11
In AABC, point E is on AB, so that AE = . EB. Find CE if AC = 4, CB = 5, and AB = 6. 5, =
Answers
To find CE, we first need to find the length of AE and EB. We know that AE = 2/3 AB and EB = 1/3 AB, so AE = 4 and EB = 2.
Now we can use the Law of Cosines to find the length of AC:
AC^2 = AB^2 + BC^2 - 2AB*BC*cos(A)
Plugging in the given values, we get:
AC^2 = 6^2 + 5^2 - 2(6)(5)cos(A)
Simplifying:
AC^2 = 61 - 60cos(A)
We also know that AC = 4, so we can set these two equations equal to each other and solve for cos(A):
4^2 = 61 - 60cos(A)
16 = 60cos(A) - 61
77 = 60cos(A)
cos(A) = 77/60
Now we can use the Law of Cosines again to find CE:
CE^2 = AC^2 + AE^2 - 2AC*AE*cos(A)
Plugging in the values we know:
CE^2 = 4^2 + 4^2 - 2(4)(4)(77/60)
Simplifying:
CE^2 = 32/3
Taking the square root:
CE = sqrt(32/3)
Simplifying:
CE = 4sqrt(2/3)
Therefore, CE is approximately equal to 2.309.
Learn more about AC AB points: https://brainly.com/question/4372174
#SPJ11
can someone help me with this?? it’s properties of quadratic relations
Answers
The table should be completed with the correct key features as follows;
Axis of symmetry (1st graph): x = 1.
Vertex (1st graph): (1, -9).
Minimum (1st graph): -9.
y-intercept (1st graph): (0, -8).
Axis of symmetry (2nd graph): x = 2.
Vertex (2nd graph): (2, 16).
Maximum (2nd graph): 16.
y-intercept (2nd graph): (0, 12).
What is the graph of a quadratic function?In Mathematics and Geometry, the graph of a quadratic function would always form a parabolic curve because it is a u-shaped. Based on the first graph of a quadratic function, we can logically deduce that the graph is an upward parabola because the coefficient of x² is positive and the value of "a" is greater than zero (0).
Based on the second graph of a quadratic function, we can logically deduce that the graph is a downward parabola because the coefficient of x² is negative and the value of "a" is less than zero (0).
Read more on quadratic functions here: brainly.com/question/24020644
#SPJ1
Let V be a vector space and o the zero vector. Prove that for all ve V,0-7= .
Answers
For all vectors v in the vector space V, the expression 0 - v is equal to the additive inverse of v, or -v.
To prove that for all vectors v in a vector space V, and with 0 as the zero vector, the expression 0 - v is equal to the additive inverse of v.
To prove this, we'll follow these steps,
1. Start with the definition of the zero vector in a vector space V.
2. Show that adding the additive inverse of v to both sides of the equation results in the desired expression.
1. Let V be a vector space and 0 be the zero vector. By definition, the zero vector has the property that for all vectors v in V, we have:
v + 0 = v
2. To find the expression for 0 - v, we first need to determine the additive inverse of v, denoted by -v. The additive inverse of v has the property:
v + (-v) = 0
Now, let's consider the expression 0 - v. To find this, we can rewrite it as 0 + (-v). Using the property of the zero vector, we know that:
0 - v = 0 + (-v) = -v
Hence, for all vectors v in the vector space V, the expression 0 - v is equal to the additive inverse of v, or -v.
Learn more about "vector space": https://brainly.com/question/13258990
#SPJ11
Find the probability that randomly selected Atlantic cod has a length that is at least 62.99 cm. 0.0002 f) is a length of 62.99 cm unusually high for a randomly selected Atlantic cod? Why or why not? yes, since the probability of having a value of length at least that high is less than or equal to 0.05 g) What length do 48% of all Atlantic cod have more than? Round your answer to two decimal places in the first box. Put the correct units in the second box. The size of fish is very important to commercial fishing. A study conducted in 2012 found the length of Atlantic cod caught in nets in Karlskrona to have a mean of 49.9 cm and a standard deviation of 3.74 cm. Round the probabilities to four decimal places. It is possible with rounding for a probability to be 0.0000. a) State the random variable. VX XX. the mean length of a sample of Atlantic cod b) Find the probability that a randomly selected Atlantic cod has a length of 39.08 cm or more. 0.9981 om c) Find the probability that a randomly selected Atlantic cod has a length of 59.08 cm or less. 0.9929 d) Find the probability that a randomly selected Atlantic cod has a length between 39.08 and 59.08 cm. 0.9910 ar e) Find the probability that randomly selected Atlantic cod has a length that is at least 62.99 cm. 0.0002 fils a length of 62.99 cm unusually high for a randomly selected Atlantic cod?
Answers
The probability that a randomly selected Atlantic cod has a length of 39.08 cm or more is 0.9981. The probability that a randomly selected Atlantic cod has a length of 59.08 cm or less is 0.9935. The probability that a randomly selected Atlantic cod has a length between 39.08 and 59.08 cm is 0.9914. The probability of a randomly selected Atlantic cod having a length that is at least 62.99 cm is 0.0002. 48% of all Atlantic cod have a length of more than 50.25 cm.
a) The random variable is the length of a sample of Atlantic cod, denoted by X.
b) The probability that a randomly selected Atlantic cod has a length of 39.08 cm or more can be found using the standard normal distribution table or a calculator. We first standardize the value of 39.08 using the formula
z = (x - μ) / σ, where μ is the mean length and σ is the standard deviation.
Therefore, z = [tex](\frac{39.08- 49.9}{ 3.74 } )[/tex]= -2.89.
From the standard normal distribution table, the probability of a z-score less than or equal to -2.89 is 0.0021.
Thus, the probability of a randomly selected Atlantic cod having a length of 39.08 cm or more is 1 - 0.0021 = 0.9981.
c) The probability that a randomly selected Atlantic cod has a length of 59.08 cm or less can be found using the same method as in part (b).
Standardizing the value of 59.08, we get z = [tex](\frac{59.08- 49.9}{ 3.74 } )[/tex]= 2.45.
Using the standard normal distribution table, the probability of a z-score less than or equal to 2.45 is 0.9935. Thus, the probability of a randomly selected Atlantic cod having a length of 59.08 cm or less is 0.9935.
d) The probability that a randomly selected Atlantic cod has a length between 39.08 and 59.08 cm can be found by subtracting the probability in part (b) from the probability in part (c).
Thus, P(39.08 < X < 59.08) = P(X ≤ 59.08) - P(X ≤ 39.08) = 0.9935 - 0.0021 = 0.9914.
e) The probability that a randomly selected Atlantic cod has a length that is at least 62.99 cm can be found using the same method as in parts (b) and (c).
Standardizing the value of 62.99, we get z = [tex](\frac{62.99- 49.9}{ 3.74 } )[/tex] = 3.49.
Using the standard normal distribution table, the probability of a z-score less than or equal to 3.49 is 0.9998.
Thus, the probability of a randomly selected Atlantic cod having a length that is at least 62.99 cm is 1 - 0.9998 = 0.0002.
f) Yes, a length of 62.99 cm is unusually high for a randomly selected Atlantic cod because the probability of having a value of length at least that high is less than or equal to 0.05.
g) To find the length that 48% of all Atlantic cod have more than, we need to find the z-score that corresponds to a cumulative probability of 0.52 (1 - 0.48).
Using the standard normal distribution table, we find that the z-score is approximately 0.10.
Then, we use the formula z = (x - μ) / σ to solve for x, where μ = 49.9 and σ = 3.74.
Thus, x = μ + σz = 49.9 + 3.74(0.10) = 50.25 cm.
Therefore, 48% of all Atlantic cod have a length of more than 50.25 cm. The units for length are in centimeters.
To know more about the standard deviation visit:
https://brainly.com/question/23907081
#SPJ11
The monthly cost of driving a car depends on the number of miles driven. Lynn found that in May it cost her $380 to drive 480 mi and in June it cost her $460 to drive 800 mi.(a) Express the monthly cost C as a function of the distance driven d, assuming that a linear relationship gives a suitable model.(b) Use part (a) to predict the cost of driving 1,500 miles per month.(c) Draw the graph of the linear function. What does the slope represent?(d) What does the y-intercept represent?(e) Why does a linear function give a suitable model in this situation?
Answers
(a)The linear function that models the monthly cost C as a function of the distance driven d is:
C(d) = 0.25d + 260
(b) we predict that it would cost $625 per month to drive 1,500 miles.
A linear function is simple and easy to interpret, which makes it a useful model for practical purposes.
(a) Let's use the two data points to find the equation of the line that models the monthly cost as a function of the distance driven. The slope of the line is the change in cost over the change in distance, so we have:
slope = (460 - 380) / (800 - 480) = 80 / 320 = 0.25
The y-intercept is the cost when no distance is driven, so we have:
y-intercept = 380 - 0.25 * 480 = 260
(b) To predict the cost of driving 1,500 miles per month, we simply plug in d = 1500 into the linear function we found in part (a):
C(1500) = 0.25(1500) + 260 = $625
Therefore, we predict that it would cost $625 per month to drive 1,500 miles.
(c) The graph of the linear function is a straight line with slope 0.25 and y-intercept 260. The slope represents the rate of change of the cost with respect to the distance driven. In other words, for each additional mile driven, the cost increases by $0.25.
The y-intercept represents the fixed cost of driving the car, which includes expenses such as insurance and maintenance that do not depend on the distance driven.
(d) The y-intercept represents the fixed cost of driving the car, which includes expenses such as insurance and maintenance that do not depend on the distance driven.
(e) A linear function gives a suitable model in this situation because the relationship between the monthly cost and the distance driven is approximately linear over the range of distances we have data for. Additionally, a linear function is simple and easy to interpret, which makes it a useful model for practical purposes.
To know more about linear function, refer here:
https://brainly.com/question/20286983
#SPJ11
Find all real values of a such that the given matrix is not invertible. (HINT: Think determinants, not row operations. Enter your answers as a comma-separated list. If an answer does not exist, enter DNE.) A= 0 1 a a 1 3 0 a 1 a =
Answers
All real values of a such that the given matrix is not invertible is -3.
To determine if a matrix is invertible, we can look at its determinant. A matrix is invertible if and only if its determinant is non-zero. Therefore, we need to find the values of a that make the determinant of matrix A equal to zero.
The determinant of matrix A is given by:
|A| = 0 1 a a 1 3 0 a 1 a
= 0(a(1)(1) - a(3)(1) + 1(0)) - 1(1(a)(1) - a(3)(0) + 1(0)) + a(1(3) - 1(0) + 0(a))
= -a + 3a + 3 - a
= a + 3
Therefore, the matrix A is not invertible when a = -3.
So the real value of a for which the matrix A is not invertible is -3.
Know more about matrix here:
https://brainly.com/question/27929071
#SPJ11
Look at the calendar. If thirteen months have passed since the circled date, what day would it be?
A. July 5th
B. July 6th
C. August 5th
D. August 6th
Answers
Answer: C
Step-by-step explanation: When did the calendar change from 13 months?
The 1752 Calendar Change
Today, Americans are used to a calendar with a "year" based the earth's rotation around the sun, with "months" having no relationship to the cycles of the moon and New Years Day falling on January 1. However, that system was not adopted in England and its colonies until 1752.
A tower is supported by a guy wire 18.5 m in length and meets the ground at an angle of 59º. At what height on the tower is the guy wire attached?
Answers
The guy wire is attached to the tower at a height of approximately 15.95 meters.
Length of the guy wire (hypotenuse) = 18.5 m
Angle between the ground and the guy wire = 59º
Using the sine function to find the height of the tower.
sin(angle) = height/hypotenuse
Putting in the known values and solving for the height.
sin(59º) = height/18.5 m
height = sin(59º) × 18.5 m
Calculating the height
height ≈ 15.95 m
To learn more about hypotenuse: https://brainly.com/question/2217700
#SPJ11
if p=-6 and q = 4 what is the smallest subset containing the value of the expression below? p^2 +q/ -|p|-q
Answers
The value of the given expression is -4, which is integer. Therefore, option B is the correct answer.
The given expression is (p²+q)/(-|p|-q).
Here, p=-6 and q=4.
Substitute p=-6 and q=4 in the given expression we get
((-6)²+4)/(-|-6|-4)
= 40/(-10)
= -4
Therefore, option B is the correct answer.
To learn more about an integers visit:
https://brainly.com/question/15276410.
#SPJ1
lily needs 16 inches of copper wire for an experiment.The wire is sold by the centimeter.Given that 1 inch = 2.54 centimeter, how many centimeters of wire does lily need.
Answers
Lily would need 40.64 centimeters of copper wire for her experiment.
Given data ,
We may use the conversion factor that 1 inch is equivalent to 2.54 centimeters to convert 16 inches to centimeters .
From the unit conversion ,
1 inch = 2.54 inches
Consequently, 16 inches is equivalent to :
40.64 centimeters are equal to 16 inches at 2.54 centimeters per inch.
Hence , Lily would thus want 40.64 centimeters of copper wire for her experiment.
To learn more about unit conversion click :
https://brainly.com/question/19420601
#SPJ1
A housewife spent 3/7 of her money in the market and 1/2 of the reminder in the shop. what fraction of her money is left?
Answers
Answer:
1/7
Step-by-step explanation:
7/7-3/7=4/7
[tex]\frac{4}{7} /2[/tex]=2/7
4/7+2/7=6/7
7/7-6/7=1/7
So the housewife has 1/7 of the money left
In the rectangle below, AE =3x+7, CE=5x-3, and mZECB=40°.
Find BD and m ZAED.
A
D
E
B
с
BD = 0
m ZAED =
n
Answers
The length of BD is 8x + 4.
The value of angle AED is determined as 100⁰.
What is the length BD?The length of BD is calculated as follows;
Based on the property of rectangle;
length BD = length AC
Length AC = AE + EC
Length AC = 3x + 7 + 5x - 3
Length AC = 8x + 4
Length BD = 8x + 4
The value of angle ECB = 40⁰
then, angle EAD = 40⁰ (alternate angles are equal)
angle EDA = 40⁰ (vertical opposite angles )
angle AED = 180 - (40 + 40) ( sum of angles in a triangle)
angle AED = 100⁰
Learn more about angles in a triangle here: https://brainly.com/question/25215131
#SPJ1
Jax came to your bank to borrow 8,500 to start a new business. Your bank offers him a 30-month loan with an annual simple interest rate of 4.35%
Answers
a) The simple interest for the loan is $927.19.
b) The total amount that Jax will have to pay at the end of 30 months is $9,427.19.
a) To calculate the simple interest for the loan, we can use the formula:
Simple Interest = Principal x Rate x Time
where Principal is the amount borrowed, Rate is the annual interest rate, and Time is the duration of the loan in years.
Since the loan is for 30 months, which is equivalent to 2.5 years, we can substitute the given values:
Simple Interest = 8,500 x 0.0435 x 2.5 = $927.19
b) To determine the total amount that Jax will have to pay at the end of 30 months, we need to add the simple interest to the original amount borrowed. The total amount can be calculated using the formula:
Total Amount = Principal + Simple Interest
Substituting the given values:
Total Amount = 8,500 + 927.19 = $9,427.19
In summary, Jax will have to pay $927.19 in simple interest and a total of $9,427.19 at the end of 30 months to repay the 8,500 loan with an annual simple interest rate of 4.35%.
To learn more about interest click on,
https://brainly.com/question/31709159
#SPJ1
Cher was climbing up a rock when suddenly she slipped 4 3/5 feet.She regained control for a moment, but then slipped again, this time falling 4 3/7 feet. what fraction represents Cher's total change in elevation on the rock wall? express an overall gain as a positive or an overall loss as a negative.
Answers
Answer: 8 2/5 feet (positive)
Step-by-step explanation:
What is the answer to 4x^2+12x-112=0
Answers
Answer:
x=4, -7
Step-by-step explanation:
4 (x−4)(x+7)=0
If any individual factor on the left side of the equation is equal to 0, the entire expression will be equal to 0.
x−4=0x+7=0Set x−4 equal to 0 and solve for x. Set
x+7 equal to 0.x+7=0
Subtract 7 from both sides of the equation. x=−7
The final solution is all the values that make 4(x−4)(x+7)=0 true.
x=4,−7
A teaching assistant collected data from students in one of her classes to investigate whether study time per week (average number of hours) differed between students in the class who planned to go to graduate school and those who did not. Complete parts (a) through (c). Click the icon to view the data. C. X = 11.67 (Round to the nearest hundredth as needed.) Find the sample mean for students who did not plan to go to graduate school. X2 = 9 (Round to the nearest hundredth as needed.) Find the standard deviation for students who planned to go to graduate school. Sy = 8.43 (Round to the nearest hundredth as needed.) Find the standard deviation for students who did not plan to go to graduate school. S2 = 3.5 (Round to the nearest hundredth as needed.) Interpret these values. O A. The sample mean was lower for the students who planned to go to graduate school, but the times were also much more variable for this group. B. The sample mean was higher for the students who planned to go to graduate school, but the times were also much more variable for this group O C. The sample mean was lower for the students who planned to go to graduate school, but the times were also much less variable for this group. OD. The sample mean was higher for the students who planned to go to graduate school, but the times were also much less variable for this group. b. Find the standard error for the difference between the sample means. Interpret. Find the standard error for the difference between the sample means. se = 2.15 (Round to the nearest hundredth as needed.) Interpret this value. A. If further random samples of these sizes were obtained from these populations, the differences between the sample means would vary. The standard deviation of these values for (x,-X2) would equal about 2.2. OB. If further random samples of these sizes were obtained from these populations, the differences between the sample means would not vary. The value of (x1 - x2) would equal about 2.2. OC. If further random samples of these sizes were obtained from these populations, the differences between the sample means would vary. The standard deviation of these values for (x3 - #2) would equal about 4.3. c. Find a 95% confidence interval comparing the population means. Interpret. Find a 95% confidence interval comparing the population means. The 95% confidence interval for (H1-H2) is (Round to the nearest tenth as needed.) 1.5, 6.9) х Data table Full data set Graduate school: 13, 7, 15, 10, 5, 5, 2, 3, 12, 16, 15, 37, 8, 14, 10, 19, 3, 26, 15, 5, 5 No graduate school: 6, 8, 14, 6, 5, 13, 10, 10, 13,5 Print Done
Answers
Is because the standard error is the standard deviation of the sampling distribution of the difference between the means, and as such, the differences between the sample means would vary across multiple random samples of the same size.
For part b, the standard error for the difference between the sample means can be calculated as:
[tex]se = sqrt((s1^2/n1) + (s2^2/n2))[/tex]
where s1 and s2 are the sample standard deviations for the two groups, and n1 and n2 are the sample sizes.
Substituting the given values, we get:
[tex]se = sqrt((8.43^2/21) + (3.5^2/21)) ≈ 2.15[/tex]
Interpretation: The standard error represents the standard deviation of the sampling distribution of the difference between the sample means. A lower standard error indicates that the sample means are more likely to be representative of their respective populations, and that the difference between the means is more likely to be significant.
The correct answer is (A): If further random samples of these sizes were obtained from these populations, the differences between the sample means would vary. The standard deviation of these values for (x1-x2) would equal about 2.2. This is because the standard error is the standard deviation of the sampling distribution of the difference between the means, and as such, the differences between the sample means would vary across multiple random samples of the same size.
To learn more about difference visit:
https://brainly.com/question/30461754
#SPJ11
Find the value of the variable.
z=
Answers
The value of z is given as follows:
z = 38.
How to obtain the value of x?We have two secants in this problem, and point C is the intersection of the two secants, hence the angle measure of z is half the difference between the angle measure of the largest arc by the angle measure of the smallest arc.
The arc measures are given as follows:
138º and 62º.
Hence the value of z is obtained as follows:
z = 0.5 x (138 - 62)
z = 38.
More can be learned about angle measures at brainly.com/question/30820033
#SPJ1
suppose mexico, one of our largest trading partners and purchaser of a large quantity of our exports, goes into a recession. use the ad/as model to determine the likely impact on our equilibrium gdp and price level.
Answers
If Mexico, one of our largest trading partners, goes into a recession, it is likely to decrease its demand for our exports. This would shift the aggregate demand (AD) curve leftward, leading to a decrease in equilibrium GDP and price level in the short run.
In the AD/AS model, a decrease in aggregate demand would cause a leftward shift of the AD curve. As a result, the intersection point of the AD and the short-run aggregate supply (SRAS) curves would move to the left, causing a decrease in equilibrium GDP and price level.
In the long run, however, the economy is likely to adjust to the new equilibrium. The decrease in aggregate demand would cause a decrease in prices, which would shift the SRAS curve rightward. Eventually, the new intersection point of the AD and the SRAS curves would be reached, resulting in a new equilibrium GDP and price level.
Overall, a recession in Mexico would likely have a negative impact on the US economy, leading to a decrease in GDP and price level in the short run. However, the economy would eventually adjust to the new equilibrium in the long run.
To learn more about Aggregate demand, visit:
https://brainly.com/question/25749867
#SPJ11
what is 400 centimetres to millimetres
Answers
Which measure of central tendency is most affected by extreme values?
A. The mean
B. The median
C. The mode
D. The standard deviation
E. All are equally affected
Answers
The presence of extreme values can cause the standard deviation to be larger than it would be otherwise, indicating greater variability in the data set.
The mean is the measure of central tendency that is most affected by extreme values or outliers. The mean is calculated by adding up all the data points and dividing by the total number of data points. Since extreme values can be significantly different from the other values in the data set, their effect on the mean can be significant.
For example, consider the following data set of salaries for a company: $30,000, $35,000, $40,000, $45,000, $50,000, and $1,000,000. The mean salary for this data set is calculated as:
($30,000 + $35,000 + $40,000 + $45,000 + $50,000 + $1,000,000) ÷ 6 = $193,333.33
Here, the extreme value of $1,000,000 has significantly impacted the mean salary. Even though the other salaries are all within a reasonable range, the mean is skewed by the extreme value.
On the other hand, the median and mode are less affected by extreme values. The median is the middle value in a data set when the data is arranged in order, and the mode is the most frequently occurring value. In the above example, the median salary would be $42,500, and the mode would be undefined as no salary occurs more than once.
The standard deviation is a measure of the spread or dispersion of the data, and is not directly affected by extreme values. However, the presence of extreme values can cause the standard deviation to be larger than it would be otherwise, indicating greater variability in the data set.
To learn more about dispersion visit:
https://brainly.com/question/13265071
#SPJ11