Please help.
Subject is geometry

Answer:

The quadrilateral is a square. A quadrilateral is a polygon with four sides. There are many types of quadrilaterals such as parallelogram and rhombuses. A rhombus is a parallelogram with four congruent sides. The plural of a rhombus is rhombi.  A parallelogram is a quadrilateral in which both pairs of opposite sides are parallel. A square is a rhombus becasue it has 4 congruent sides and angles

Step-by-step explanation:

Hope this helps!!

The measure of angle J is 51.3 degrees (rounded to the nearest tenth).

We can use the Pythagorean theorem to find the length of the hypotenuse KJ of the right triangle KIJ. The Pythagorean theorem states that for a right triangle, the square of the hypotenuse is equal to the sum of the squares of the other two sides. Therefore, we have:

KJ² = KI² + IJ²

Substituting the given values, we get:

KJ² = 4² + 2²

KJ²= 20

Taking the square root of both sides, we get:

KJ = √20 = 2√5

Now, we can use the definition of cosine to find the measure of angle J

cos(J) = 2 / (2√5)

Simplifying the expression, we get:

cos(J) = √5 / 5

Taking the inverse cosine of both sides, we get:

J = cos⁽⁻¹⁾(√5 / 5)

We find that the inverse cosine of √5 / 5 is approximately 51.3 degrees. Therefore, the measure of angle J is 51.3 degrees (rounded to the nearest tenth).

The cosine of an angle in a right triangle equals the adjacent side divided by the hypotenuse.

To know more about Right angled triangle, click here,

https://brainly.com/question/3770177

#SPJ1

Therefore, the scale factor of the drawing is 4/3.

In mathematics, the scale factor is the ratio between two corresponding measurements in different scales. It is a measure of how much a figure or object has been scaled up or down, compared to its original size. The scale factor is often used in geometry and is particularly useful when creating scale drawings or models. A scale drawing is a drawing that is proportional to the actual size of the object it represents, but is scaled down or up by a certain factor to fit on a piece of paper or to make it easier to work with. The scale factor is used to determine the relationship between the measurements of the original object and the measurements of the scaled-down or scaled-up version.

Here,

To find the scale factor of the drawing, we need to determine the ratio of the length in the drawing to the actual length.

Here, the scale is given as 8 inches = 6 feet. This means that every 8 inches in the drawing represents 6 feet in real life.

To find the ratio of the length in the drawing to the actual length, we can set up a proportion:

8 inches / 6 feet = x inches / y feet

where x is the length in the drawing that corresponds to a length of y feet in real life.

To solve for x, we can cross-multiply and simplify:

8 inches * y feet = 6 feet * x inches

8y = 6x

x = (8/6) y

x = (4/3) y

This means that the length in the drawing is (4/3) times the length in real life.

To know more about scale factor,

https://brainly.com/question/30215119

#SPJ1

Answer:

[tex]\frac{1}{4}[/tex]

Step-by-step explanation:

The simpliest way to find a slope of a graph such like this is to find what we call the "rise" and "run"

Find two points on the graph that match with the grid in the background. Two points on this graph that can represent this example is (-3, 1) and (0, 2)

Start at the left-most point [-3, 1 in this case] and go up until you match the same y-axis as your second point. Then, go right until you meet said point. From (-3, 1) to (0, 2) you go up once, and then right four times. This results in the fraction 1/4

Answer: 81 inches

Step-by-step explanation:

Area of a trapezoid is … Area= 1/2(b1+b2)h

So if we plug it in

Area = 1/2(8+10)9

= 1/2(18)9

= 9(9) = 81

Measurement is the act of comparing an object's properties to a standard quantity. It is crucial in determining an object's quantity.

For instance, to measure the height of a tin, one must measure the vertical distance from the base to the top.

The measurement must be in millimeters, and a ruler is the most suitable tool.

To do this, place the ruler vertically with point 0 at the baseline of the tin, mark the point where the ruler coincides with the top, and read the height to the nearest millimeter.

To measure the height of a tin in millimeters, follow these steps:

Obtain a ruler that has millimeter markings.

Place the tin upright on a flat surface.

Position the ruler vertically with its zero point aligned with the base of the tin.

Carefully move the ruler up or down until it reaches the top edge of the tin.

Read the measurement value at the point where the ruler aligns with the top edge of the tin.

Record the height measurement in millimeters to the nearest whole number.

For example, if the measurement value is 65.5 millimeters, then the real height of the tin in millimeters is 66 millimeters (rounded to the nearest whole number).

Read more about measurements here:

https://brainly.com/question/1578168

#SPJ1

List the procedure to measure the height of a tin in mm and write the real height in mm

The mean and standard deviation of sleep time for the population are 9.2 hours and 8.225 hours.

In statistics and probability theory, the normal distribution is a continuous probability distribution that is often utilised. Due to its distinctive form, it is sometimes referred to as the bell curve or the Gaussian distribution. Many statistical and data analysis techniques, such as confidence intervals, regression analysis, and hypothesis testing, all make use of the normal distribution. It is well recognised that many real-world occurrences, like heights, weights, and IQ scores, follow a normal distribution, making it a useful tool for data analysis and interpretation.

Given that, 5% of average sleep time is less than 9 hours.

The z-score for the lower 5% percentile is z = -1.645.

Similarly, for upper 5th percentile we have z = 1.645.

The z-score is given as:

z = (x - μ) / σ

For the lower 5th percentile:

-1.645 = (9 - μ) / σ

For the upper 5th percentile:

1.645 = (9.4 - μ) / σ

Adding the two equations we have:

-1.645σ = (9 - μ)

1.645σ = (9.4 - μ)

0 = 18.4 - 2μ

μ = 9.2 hours.

Substitute the value of μ:

1.645σ = (9.4 - 9.2)

1.645σ = 0.2

σ = 8.225

Hence, the mean and standard deviation of sleep time for the population are 9.2 hours and 8.225 hours.

Learn more about normal distribution here:

https://brainly.com/question/13759327

#SPJ1

The angle x is approximately equal to option (c) 49 degrees

Sine is a trigonometric function that relates the ratios of the sides of a right triangle. Specifically, the sine of an angle in a right triangle is defined as the ratio of the length of the side opposite the angle to the length of the hypotenuse. In other words, sin(X) = opposite / hypotenuse.

Since the sine function is periodic, there can be multiple angles that have the same sine value. In general, for any angle X, sin(X) = sin(180° - X), which means that the sine of an angle and its supplement have the same value.=

Therefore, it's important to specify the range of the angle we're interested in when finding the inverse sine function, which gives us the unique angle in the range of -90° to 90° that has the specified sine value.

sin⁻¹(0.7547) ≈ 49°

Therefore, the correct option is (c) 49 degrees

Learn more about inverse sine function here

brainly.com/question/28468393

#SPJ4

Answer:

It's B.

Step-by-step explanation:

To make the given system of linear equations have no solution, we need the second equation to be inconsistent with the first equation. This means that the two equations must be parallel lines, and they cannot intersect at any point.

We can see that the first equation -7x + y = 3 has a slope of 7, since it can be written in slope-intercept form as y = 7x + 3. Therefore, to create a parallel line with the same slope of 7, we can choose the second equation to be:

B. -7x + y = -10

This equation has the same slope of 7 as the first equation, but it intersects the y-axis at a different point (-10 instead of 3). Therefore, the two lines are parallel and do not intersect, so the system of equations has no solution

Hope this helps you! I'm sorry if it doesn't. If you need more help, ask me! :]

Neither option (a) nor option (b) has a horizontal asymptote at y = 2, there is no correct answer to this question.

A rational function is a mathematical function that can be expressed as a ratio of two polynomial functions, where the denominator is not equal to zero.

To have vertical asymptotes at x = 3 and x = –4, the denominator of the rational function must have factors of (x – 3) and (x + 4), respectively.

Option (a) has a denominator of (x² + x – 12), which can be factored as (x – 3)(x + 4), satisfying the conditions for vertical asymptotes.

Option (b) has a denominator of (x² – x – 12), which can also be factored as (x – 3)(x + 4), satisfying the conditions for vertical asymptotes.

Therefore, the answer is either option (a) or option (b).

To determine which of these options has a horizontal asymptote at y = 2, we can perform long division or use the fact that the leading term of the rational function will determine the horizontal asymptote.

Dividing x² by (x² + x – 12), we get:

x² + x - 12 | x² + 0x + 0

 - x² -  x

Thus, the quotient is 1 and the remainder is x. So the rational function simplifies to:

y = x/(x² + x - 12)

The leading term of this rational function is x/x², which simplifies to 1/x. Therefore, it does not have a horizontal asymptote at y = 2.

Dividing x² by (x² – x – 12), we get:

x² - x - 12 | x² + 0x + 0

 + x² - x

Thus, the quotient is 1 and the remainder is x. So the rational function simplifies to:

y = x/(x² - x - 12)

The leading term of this rational function is x/x², which simplifies to 1/x. Therefore, it does not have a horizontal asymptote at y = 2.

To know more about horizontal asymptote visit:

https://brainly.com/question/4084552

#SPJ9

196.75 units

Answer:(a) P(X < 201) = 0.0099(b) P(201 < X < 217) = 0.9544(c) P(X > 227.12) = 0.04Explanation:Given that, X be a normal random variable with mean 209 units and standard deviation 7 units.We need to find the following.(a) P(X < 201)(b) P(201 < X < 217)(c) P(X > x) = 0.04.(a) We know that,When X is a normally distributed variable with mean μ and standard deviation σ,thenZ = (X - μ) / σ is a standard normal variable.Then,P(X < 201) = P(Z < (201 - 209) / 7)= P(Z < -1.14)Using the z-tables, the probability is 0.0099.(b) We need to find the probability that X will be within 8 units of the mean. Therefore,X will be within 8 units of the mean, if 201 < X < 217.Therefore,P(201 < X < 217) = P((X - μ)/σ) < (217 - 209)/7) - P((X - μ)/σ) < (201 - 209)/7)= P(0.57 < Z < -0.57)Using z-tables, P(0.57 < Z < -0.57) = 0.9544(c) We need to find the value of X such that P(X > x) = 0.04.Then,P(Z > (X - μ)/σ) = 0.04P(Z < -1.75) = 0.04Using z-tables, P(Z < -1.75) = 0.04By using the standard normal distribution tables, the value of -1.75 corresponds to 0.0401.Therefore,-1.75 = (X - 209)/7-12.25 = X - 209X = 209 - 12.25X = 196.75Therefore, the probability is 0.04 that X will be more than 196.75 units.

Learn more about random variable

brainly.com/question/17238189

#SPJ4

keeping in mind that perpendicular lines have negative reciprocal slopes, let's check for the slope of the equation above

[tex]y=\stackrel{\stackrel{m}{\downarrow }}{\cfrac{5}{3}}x-3\qquad \impliedby \qquad \begin{array}{|c|ll} \cline{1-1} slope-intercept~form\\ \cline{1-1} \\ y=\underset{y-intercept}{\stackrel{slope\qquad }{\stackrel{\downarrow }{m}x+\underset{\uparrow }{b}}} \\\\ \cline{1-1} \end{array} \\\\[-0.35em] ~\dotfill[/tex]

[tex]\stackrel{~\hspace{5em}\textit{perpendicular lines have \underline{negative reciprocal} slopes}~\hspace{5em}} {\stackrel{slope}{ \cfrac{5}{3}} ~\hfill \stackrel{reciprocal}{\cfrac{3}{5}} ~\hfill \stackrel{negative~reciprocal}{-\cfrac{3}{5} }}[/tex]

so we're really looking for the equation of a line whose slope is -3/5 and it passes through (5 , -2)

[tex](\stackrel{x_1}{5}~,~\stackrel{y_1}{-2})\hspace{10em} \stackrel{slope}{m} ~=~ - \cfrac{3}{5} \\\\\\ \begin{array}{|c|ll} \cline{1-1} \textit{point-slope form}\\ \cline{1-1} \\ y-y_1=m(x-x_1) \\\\ \cline{1-1} \end{array}\implies y-\stackrel{y_1}{(-2)}=\stackrel{m}{- \cfrac{3}{5}}(x-\stackrel{x_1}{5}) \implies y +2= -\cfrac{3}{5} (x -5) \\\\\\ y+2=-\cfrac{3}{5}x+3\implies {\Large \begin{array}{llll} y=-\cfrac{3}{5}x+1 \end{array}}[/tex]

At a confidence level of 95%, the interval estimate for the average proportion of defective widgets is approximately 0.020 to 0.082.

To find the confidence interval for the proportion of defective widgets, we can use the formula:

CI = p ± z*(sqrt(p*(1-p)/n))

where:

p = proportion of defective widgets in the sample

z* = the z-value for the desired confidence level

n = sample size

The z-value depends on the desired confidence level. For example, if we want a 95% confidence level, we would use a z-value of 1.96 (from the standard normal distribution table).

Plugging in the values given in the problem, we get:

p = 23/450 = 0.0511

n = 450

z* = 1.96 (for a 95% confidence level)

sqrt(p*(1-p)/n) = sqrt(0.0511*(1-0.0511)/450) ≈ 0.016

Therefore, the 95% confidence interval for the proportion of defective widgets is:

CI = 0.0511 ± 1.96*0.016

= (0.020, 0.082)

This means we are 95% confident that the true proportion of defective widgets in the population is between 0.020 and 0.082.

Learn more about confidence interval at https://brainly.com/question/20264857

#SPJ11

Answer:

3.5g/cm³ to 1d.p

Step-by-step explanation:

Density = mass/volume

Mass = 416g

Volume = 12 x 5 x 2 (length x width x height)

Volume 120cm³

Density = 416g/ 120cm³

Denaity = 3.47g/cm³

The equation has no solution as 10 + x ≠ 5 + x

When the value of x is 2, the equation also have no solution as 12 ≠ 7

Algebraic expressions are simply defined as expressions that are composed of terms, variables, constants, factors and coefficients.

These algebraic expressions are expressions that are identified with arithmetic operations, such as;

From the information given, we have;

6 + x + 4 = 2 + x  + 3

collect the like terms, we have

10 + x = 5 + x

But we know that 5 is not equal to x and thus, the equation has no solution

Now, let's substitute the value of x as 2, we have;

10 + 2 = 5 + 2

This gives;

12 = 7

This is not true and thus, the equation has no solution

Learn about algebraic expressions at: https://brainly.com/question/4344214

#SPJ1

the husband can reject the null hypothesis and conclude that his guess about the probability of changing the diaper when the baby cries is statistically significant at the 5% level if the LR exceeds 3.84.

what is probability?

Probability is a measure of the likelihood or chance of an event occurring. It is a quantitative measure that ranges from 0 (indicating impossibility) to 1 (indicating certainty).

a) The null hypothesis (H0) from the husband's perspective is that the true probability of the baby crying for a diaper change is equal to the wife's claim, i.e., θ = 0.3. The alternative hypothesis (Ha) is that the true probability is different from the wife's claim, i.e., θ ≠ 0.3.

(b) To perform a likelihood ratio test, we first calculate the maximum likelihood estimates of the parameters under the null and alternative hypotheses.

Next, we calculate the likelihood ratio statistic:

LR = (L(0.5)/L(0.3))^20

where L(0.5) and L(0.3) are the likelihoods of the data under the alternative and null hypotheses, respectively.

Simplifying, we get:

LR = (0.5/0.3)^20 = 4.19

To find the rejection region, we compare the LR with the critical value of the chi-squared distribution with 1 degree of freedom at the desired significance level (α). Let's assume a significance level of α = 0.05.

The critical value for this test is approximately 3.84. Thus, the rejection region is:

LR > 3.84

Therefore, the husband can reject the null hypothesis and conclude that his guess about the probability of changing the diaper when the baby cries is statistically significant at the 5% level if the LR exceeds 3.84.

To learn more about probability from the given link:

https://brainly.com/question/30034780

#SPJ1

Answer:

Below

Step-by-step explanation:

The three internal angles f ANY triangle add up to 180 °

w^2 + 84   + w  + 3w = 180

w^2 + 4w + 84 = 180

w^2 + 4w - 96 = 0    Use Quadratic Formula    a = 1   b = 4   c = -96

to find the positive value of w = 8

Answer:

KL=43

Step-by-step explanation:

JKL=60,  jk=17,  KL=43

Answer:

25 pounds of cashews and 15 pounds of pistachios.

Step-by-step explanation:

Helping in the name of Jesus.

Answer:

15 pounds of pistachio and 25 pounds of cashews

Step-by-step explanation:

By the given information, we can make a system of equations: Pistachio + Cashew = 40

If we multiply the price of each to the weight, we get 10 cashews + 6 pistachio = 340 pounds. We can use this system of equations to find the amount of each nut.

The correct answer is option (B) 3/8 for the probability based on given tree diagram.

The tree diagram shows all possible outcomes when flipping three coins. To find the probability of one coin landing on tails and two coins landing on heads, we need to find all the outcomes where this occurs.

From the tree diagram, we can see that there are three outcomes where one coin lands on tails and two coins land on heads: (H, H, T), (H, T, H), and (T, H, H).

Therefore, the probability of one coin landing on tails and two coins landing on heads is the sum of the probabilities of these three outcomes:

P(one tail, two heads) = P(H, H, T) + P(H, T, H) + P(T, H, H)

Using the multiplication rule of probability, we can see that each of these outcomes has a probability of (1/2) * (1/2) * (1/2) = 1/8.

Therefore, the probability of one coin landing on tails and two coins landing on heads is:

P(one tail, two heads) = 1/8 + 1/8 + 1/8 = 3/8

Learn more about probability here:

https://brainly.com/question/30034780

#SPJ1

Answer: Repost this with the question (not just the graph) attached.

Step-by-step explanation: Please attach the question, otherwise I cannot help you:)

The rate at which the distance from the plane to the station is increasing when it has a total distance of 5 miles away from the station is 656 mi/h (rounded to the nearest whole number).

To solve this problem, we can use the equation

rate = distance/time.

We know the distance and the time, so we can calculate the rate:
rate = 5 mi/ 1 hour

      = 5 mi/3600 sec

      = 5/3600 mi/sec

      = 0.00138889 mi/sec.
Multiplying this by 3600 to convert it to mi/h gives us 656 mi/h.
for such more question on distance

https://brainly.com/question/26550516

#SPJ11

Answer:

cosx

Step-by-step explanation:

using the identity

• sin² = 1 - cos²x

cos²x + cosx - 1 + sin²x

= cos²x + cosx - 1 + 1 - cos²x ← collect like terms

= cos x

The question asks if the data contradict the assertion of the physical model, which suggests that the mean temperature increase should not be more than 5 Celsius.

To answer the question, we need to calculate the mean temperature increase from the data given: 6.4, 4.3, 5.7, 4.9, 6.5, 5.9, 6.4, 5.1. We can do this by adding all the values and dividing them by the number of runs (8): (6.4 + 4.3 + 5.7 + 4.9 + 6.5 + 5.9 + 6.4 + 5.1)/8 = 5.4. The mean temperature increase of 5.4 does not exceed the maximum of 5 Celsius, which means that the data does not contradict the physical model.

For more such mean temperature questions

https://brainly.com/question/28792205

#SPJ11

Answer:

[tex] \sf \: y = - 1[/tex]

Step-by-step explanation:

Now we have to,

→ Find the required value of y.

The equation is,

→ -4(y - 2) = 12

Then the value of y will be,

→ -4(y - 2) = 12

→ -4(y) - 4(-2) = 12

→ -4y - (-8) = 12

→ -4y + 8 = 12

→ -4y = 12 - 8

→ -4y = 4

→ y = 4 ÷ (-4)

→ [ y = -1 ]

Hence, the value of y is -1.

A) by mere observation, the triangles from A, B, C, and D that is congruent or similar to Triangle E is Triangle C.

B) The other two triangles that are congruent to each other are Triangles A and B.

Two triangles are considered congruent if they have the same size and shape. This means that all corresponding sides and angles of the two triangles are equal.

In other words, if you were to superimpose one triangle onto the other, they would match up perfectly. The concept of congruence is important in geometry, as it allows us to make precise statements about the relationship between different figures and their properties.

Learn more about Congruence:
https://brainly.com/question/7888063
#SPJ1

Full Question:

See the attached image.

The nearest whole number when rounding to the nearest metre forces us to choose 3, which is the case here as 2.51 is closer to 3 than it is to 2.

The digits in a numerical value known as significant figures, sometimes known as significant digits, are those that show how precisely the measurement was made. The degree of precision of the measuring device used to perform the measurement determines the number of significant figures in the measurement.

We must round the height restriction to the closest metre in order to show it on the sign because it is specified as 2.51 metres.

We look at the digit in the tenths place, which is 5, to round to the closest metre. We round up the number to the next one since 5 is more than or equal to 5, which is 1. Thus, 3 m should be listed as the maximum height.

This is due to the fact that picking the nearest whole number when rounding to the nearest metre forces us to choose 3, which is the case here as 2.51 is closer to 3 than it is to 2.

Learn more about significant figures here:

https://brainly.com/question/29153641

#SPJ9

In practical terms, the meanings of f^(-1)(0.7), f^(-1)(0.5),f^(-1)(0.2) are as follows:f^(-1)(0.7): This means the value of x for which f(x) = 0.7. Here, f^-1 is the inverse function of f. It returns the value of the input x for which the output of the function is 0.7. In other words, if y = f(x), then f^(-1)(y) = x. Hence, f^(-1)(0.7) means the input value of x for which the function returns 0.7 as the output.f^(-1)(0.5): This means the value of x for which f(x) = 0.5. Similarly, the inverse of the function f, f^-1, returns the value of the input x for which the output of the function is 0.5.f^(-1)(0.2): This means the value of x for which f(x) = 0.2. Here, f^-1 is the inverse function of f. It returns the value of the input x for which the output of the function is 0.2. Hence, f^(-1)(0.2) means the input value of x for which the function returns 0.2 as the output.

learn more about inverse function

brainly.com/question/2541698

#SPJ4

Answer:  second graph,and upper curve is  right answer .

Step-by-step explanation: just  put X= 0,1,2,..

and you get Y.  and those are the dots which you have to see that are on that graph.

Therefore , the solution of the given problem of triangle comes out to be  y + y√2 and y - y√2.  are the two possible numbers for x.

If a polygon has at least one additional segment, it is a hexagon. Its form is a straightforward rectangle. Something like this can only be distinguished from a regular triangular by edges A and B. Euclidean geometry only creates a portion of the cube, despite the precise collinearity of the borders. A triangular has three sides and three angles.

Here,

Due to the similarity of the two triangles in the diagram, we can create an equation and solve for x using the ratios of respective sides.

Assuming that the line segment's length is x, we can construct the following equation:

=> (2x + y) / x = x / y

=> (2x + y) y = x²

=> 2xy + y² = x²

=> x² - 2xy - y² = 0

This quadratic equation in x has the coefficients a = 1, b = -2y, and c = -y2 in it. The quadratic algorithm yields:

=> x = [2y ± √((2y)² - 4(1)(-y²))] / 2(1)

=> x = [2y ± √(4y² + 4y²)] / 2

=> x = [y ± y√2]

Therefore, y + y√2 and y - y√2.  are the two possible numbers for x.

The two triangles in the illustration are thought to be comparable.

To know more about triangle visit:

https://brainly.com/question/2773823

#SPJ1