(PLEASE HELP)"The most abundant isotope of Hydrogen has a mass of 1 amu. Therefore, the average atomic mass on the periodic table for Hydrogen will be 1 amu." Using the terms isotopes, abundance, average atomic mass and weighted mass to explain why this misconception is incorrect and why the abundance(amount) of each isotope of the element affect the average atomic mass.

Yes, a reaction will occur if a piece of metallic tin(Sn) is placed with a piece of metallic Zn(Zinc).

To establish whether a reaction will take place or not, we use the reactivity series of metals.

The reactivity series of some metals is given in the adjoining image.

In this series, a higher placed element will react with a lower placed element.

As we can see from the series zinc is at a higher level as compared to tin, therefore it will react with tin.

Thus, a reaction will occur if a piece of metallic tin(Sn) is placed with a piece of metallic Zn(Zinc).

To know more about "reactivity series", refer to the following link:

https://brainly.com/question/15304384?referrer=searchResults

#SPJ1

The result in binary would be 10000011110101100000.

By constantly dividing the supplied number by 2 until we receive 0 as the quotient, we can convert a decimal number to a binary number in the simplest way possible. The binary value of the specified decimal number is then obtained by writing the remainders in reverse order. A binary number is made up of two 0s and 1s. Two is used as the base representation for binary numerals. As an illustration, (101)2 (101) 2. Switches can be used to encode and store numbers in binary form. This system is compatible with a variety of digital devices, including computers, calculators, digital TV decoder boxes, cell phones, burglar alarms, watches, and more. Binary values are kept in memory, which is essentially a collection of electronic on/off switches.

The complete question is- Convert 540000 to Binary form.

Learn more about binary here-

https://brainly.com/question/19802955

#SPJ9

Answer:

Yes, it can be separated through evaporation. It retains its original properties.

Explanation:

In sulfuric acid solution it is produced from sulphur, oxygen and water and  the amount of hydrogen is 0.038 mol

Here given data is zinc = 2.5 gram in 100 mL of sulfuric acid means H₂SO₄ solution

Then the reaction is

Zn + H₂SO₄ → ZnSO₄ + H₂

1 mol of Zn has mass = 65.39 g

The amount of Zn is 2.5 gram/ 65.39 g/mol

Zn = 0.038 mol

The amount of H₂ is same as amount of Zn consumed is 0.038 mol

Therefore, the amount of hydrogen produced 0.038 mol

Know more about amount of hydrogen

https://brainly.com/question/28667602

#SPJ1

The calculated energy is 3.97×10⁻²¹J

A single photon has an energy of hv or = (h/2), where h is the Planck constant of 6.626 x 10-34 Joule-sec. If the photon's frequency is known, we may apply the formula E = h f to determine a photon's energy. The equation E = h c can be used to determine a photon's energy if its wavelength is known.

The photon has a 3.97 1021 J energy.

E=hf, with

Planck's constant is h, and the photon's frequency is f.

The second equation is f=c, where c is the speed of light and is the photon's wavelength.

F=c, so we can write

E=hcλ

=6.626×10⁻³⁴J⋅s×2.998×10⁸m⋅s⁻¹/5.00×10⁴×10⁻⁹

=3.97×10⁻²¹J

Learn more about Energy here-

https://brainly.com/question/1932868

#SPJ9

Taking into account the definition of wavelength, frecuency and propagation speed, the frequency of radiation whose wavelength is 0.81 nm is 3.48×10¹⁷ Hz.

Wavelength is the minimum distance between two successive points on the wave that are in the same state of vibration. It is expressed in units of length (m).

Frequency is the number of vibrations that occur in a unit of time. Its unit is s⁻¹ or hertz (Hz).

The propagation speed measures the speed at which the wave disturbance propagates along its displacement.

The propagation speed relate the wavelength (λ) and the frequency (f) inversely proportional using the following equation:

v = f× λ

All electromagnetic waves propagate in a vacuum at a constant speed of  the speed of light.

In this case, you know:

Replacing in the definition of propagation speed:

3×10⁸ m/s= f× 0.86×10⁻⁹ m

Solving:

3×10⁸ m/s÷ 0.86×10⁻⁹ m= f

3.48×10¹⁷ Hz= f

In summary, the frequency of radiation whose wavelength is 0.81 nm is 3.48×10¹⁷ Hz.

Learn more about wavelength, frecuency and propagation speed:

brainly.com/question/2232652

brainly.com/question/7321084

brainly.com/question/14946166

#SPJ1

Answer:

there are only three elements in 3CaSO4: calcium, sulfur and oxygen

Sodium is a metal that belongs to group 1 of the periodic table.

My favorite element is sodium. Sodium is found in group one of the periodic table. The element is univalent and also forms univalent positive ions. Like every other metal, sodium is able to react with dilute acids to liberate hydrogen gas.

Sodium is a light metal and is known to react with mercury to form the sodium mercury amalgam which is obtained during the electrolysis of sodium chloride. All of the compounds that are formed by sodium are ionic in nature. However the hydrides of sodium are unstable.

Sodium is highly reactive thus it must not be exposed to air since it could ignite spontaneously in air. As such, sodium must be stored under paraffin oil. All the compounds of sodium are ionic in nature.

Learn more about sodium:https://brainly.com/question/24010534

#SPJ1

Answer: what is normality =

As per the standard definition, normality is described as the number of gram or mole equivalents of solute present in one liter of a solution. When we say equivalent, it is the number of moles of reactive units in a compound.

How can you prepare sodium carbonate in 250 ml?

Procedure

Take a watch glass, wash it with distilled water and dry it.

Weigh the exact amount of clean and dried watch glass and record its weight in the notebook.

Weigh correctly on the watch glass with 1.325 g of sodium carbonate and record this weight in the notebook.

Using a funnel, transfer sodium carbonate softly and carefully from the watch glass into a clean and dry measuring flask.

Wash the watch glass with distilled water to move the particles that stick to it into the foam with the assistance of a wash bottle.

For this purpose, the volume of distilled water should not exceed 50 ml.

Wash funnels several times with distilled water to move the sticking particles into the measuring flask using a wash bottle. Add water in tiny quantities while washing the funnel. The distilled water quantity used for this purpose should not exceed 50 mL.

Using a wash bottle, wash the funnel carefully with distilled water to pass the solution attached to the funnel into the measuring flask

Turn the flask of measurement until the sodium carbonate dissolves.

Using a wash bottle, thoroughly add enough distilled water to the measuring flask just below the etched mark on it.

Add the last few mL of distilled water drop into the measuring flask until the reduced meniscus level just touches the mark.

Put the stopper on the mouth of the flask and shake softly to make the entire solution uniform. Calculate it as a solution of sodium carbonate N/10.

10 solutions of sodium carbonate in 250 ml?

Normally in the laboratory, we are required to prepare 250 ml of solution. Therefore, to prepare 250 ml of \frac{M}{10} Na2CO3 solution, \frac{10.6}{4} = 2.650 g of sodium carbonate are dissolved in lesser quantity of water and the solution is diluted to exactly 250 ml

Explanation:

Answer:

115.21 degrees Celsius

The strength of this intermolecular force will be Strong, because it is a result of interaction between ions and polarized molecules.

To know more about  electric force visit : https://brainly.com/question/2526815

#SPJ1

Answer:

low density -> high temperature -> increased particle motion -> high kinetic energy -> high thermal energy -> greater thermal expansion -> more contraction

Explanation:

To model the relationship between these factors, you need to understand how they interact. A greater density of particles usually means they are moving slower, thus resulting in less energy and less heat consequentially. As temperature increases, particles will begin to move rapidly (increase motion) and have higher kinetic energy. Similarly, a lower temperature will lead to less motion and lower kinetic energy. Furthermore, their thermal expansion will be less and have a decrease in contraction, as they will be more compact and dense.

Therefore you could make a model such as:

low density -> high temperature -> increased particle motion -> high kinetic energy -> high thermal energy -> greater thermal expansion -> more contraction

Answer:

6 metres per second squared

Explanation:

Gain in velocity = 60 - 30 = 30 m/s.

Time taken for this gain = 5 seconds

Average acceleration = 30 / 5 = 6 m/s/s.

So, 6 metres per second squared.

The name of the lab equipment is bunsen burner.

A bunsen burner is a piece of equipment found in many laboratories primarily used for the controlled burning of flammable gas in the air.

In the laboratory, the bunsen burner is used as a source of heating for reactions. The gas-air mixture can be controlled to determine the level of flame and heat that will be produced.

Bunsen burners can vary in structure depending on the maker. The gas supply can be any of butane, propane, etc.

More on bunsen burners can be found here: https://brainly.com/question/743920

#SPJ1

Answer:

7.) 126.7 cm³

8.) 789 g

Explanation:

7.) To find the volume (cm³) of alcohol, you need to multiply the given mass (g) by the density. The denisty ratio represents grams of the alcohol per every 1 cm³. It is important to arrange the ratio in a way that allows for the cancellation of units (grams should be in the denominator). The final answer should have 4 sig figs to match the given value with the least amount of sig figs (100.0 grams).

 100.0 grams                  1 cm³
---------------------  x  ---------------------------  =  126.7 cm³
                                0.78945 grams

8.) This time, you are given the volume instead of the mass. The same process can be used in this problem, but you first need to convert liters (L) to cm³ to be able to use the denisty ratio. Once you find the volume in cm³, you can multiply it by the density to find the mass. Again, be sure to arrange the conversions in a way that allows for the cancellation of units. The final answer should have 3 sig figs to match the given value with the least amount of sig figs (1.00 L).

1 L = 1,000 cm³

  1.00 L           1,000 cm³           0.78945 g
-------------  x  -------------------  x  --------------------  =  789 g
                             1 L                     1 cm³

Explanation:

hi I am not sure if you have any questions or concerns please visit the plug-in settings to try and you have any questions or concerns please visit

Answer:

if the forces among the particles that makeup the nucleus are balanced, it is stable. Stable atoms retain their form indefinitely, while unstable atoms undergo radioactive decay. Most naturally occurring atoms ate stable and do not decay. A stable atom has a net charge of 0. In other words, It has an equal number of protons and electrons.

According to the given statement A sample of pure zinc has a mass of 4.50 g has a volume of 0.631 cm³.

A three-dimensional object's volume, expressed in cubic units (as inches, quarts, or centimetres), is its cubic capacity. the volume that a material takes up in a given space.

As opposed to length, width, and height for a rectangular shape's area, the basic formula for volume is length, breadth, and height. The calculation is unaffected by how the different dimensions are referred to; for example, "depth" can be used in place of "height."

Volume= Density/Mass

Mass = 4.50 g

Density = 7.13 g/cm³

Volume = ?

Volume = 4.50 g/7.13 g/cm³

Volume = 0.631 cm³

The zinc has a 0.631 cm³ volume.

To know more about Volume visit:

https://brainly.com/question/28058531

#SPJ9

​

​

Answer:

Explanation:

It is A because the electrice flows through the cord to give energy for the blades to move.

Answer:

fluorine is  soluble

Explanation:

Sodium has three shells while beryllium has two shells. Beryllium has one more valence electron compared to sodium.

Learn more about valence electron here-
https://brainly.com/question/371590

#SPJ9

Answer:

the atomic weight of mass is 196.96657 u

An additional damage of the pesticides is that they  have been washed into local sources of drinking water.

The pesticides are chemicals that could be used to prevent the growth of weeds on agricultural lands. We know that many of these pesticides have the ability to find their way into food grains and bioaccumulate in human systems.

These pesticides are equally able to poison the mammal populations that are in an area as well as to move along with surface water into the surrounding water bodies were they contaminate aquatic organisms.

Hence, an additional damage of the pesticides is that they  have been washed into local sources of drinking water.

Learn more about pesticides:https://brainly.com/question/24316938

#SPJ1

Answer:

Dissolving a solid in liquid, such as table salt in water, is a physical change because only the state of the matter has changed. Physical changes can often be reversed. Allowing the water to evaporate will return the salt to a solid state.

The element belongs to group 1A of the periodic table because it has only one electron in its 3s orbital.

Based on the electronic configuration, the element is a reducing agent.

Electronegativity is the ability of an atom of an element to attract electrons to itself.

A neutral atom that has high electronegativity will gain electrons to form an anion during ionic bond formation.

The electronic configuration of an element is the arrangement of the electrons found in the atom of the element in shells or orbitals around the nucleus.

Electronic configuration arranges the electrons in the atom of the element in increasing order of energy level.

Considering the given element with the electronic configuration shown below:

electronic configuration of element = 1s²2s²2p⁶3s¹

The element belongs to group 1A of the periodic table because it has only one electron in its 3s orbital, the valence orbital.

Based on the electronic configuration, the element is a good reducing agent.

Electronegativity is the ability of an atom of an element to attract electrons to itself.

A neutral atom that has high electronegativity will gain electrons to form a negative ion or anion  during ionic bond formation.

Learn more about electronic configuration at: https://brainly.com/question/26084288
#SPJ1

Answer:

High humidity

Warm

High Pressure.

Answer:

Relative Humidity: high

Air Temperature: warm

Air Pressure: low