please, pretty please help me!

Please, Pretty Please Help Me!

Answers

Answer 1

Answer:

umm

Explanation:

1223565 578633 =334675

Answer 2
Hhsjjsjdbdvbr fineee

Related Questions

Can anyone help me with this question please
I’ll mark as brainliest
No links.

Answers

the transverse Wave which is Answer:2

Answer:

1

Explanation:

amplitude is the maximum distance from the rest of the particles. amplitude is thus measured from the rest position to the peak of a crest or of a trough.

as seen below, graph 1 has an amplitude of 1 while both graph 2 and 3 has an amplitude of 2.

In regions of the cardiovascular system where there is steady laminar blood flow, the shear stress on cells lining the walls of the blood vessels is about 20 N / M2. If the shear strain is about 0.008, estimate the shear modulus for the affected cells.

Answers

Answer:

Shear Modulus = 2500 Pa = 2.5 KPa

Explanation:

The shear modulus is defined as the ratio between the shear stress and the shear strain. Hence, the shear modulus, in this case, can be calculated by the use of the following formula:

[tex]Shear\ Modulus = \frac{Shear\ Stress}{Shear\ Strain}\\[/tex]

we have,

shear stress = 20 N/m²

shear strain = 0.008

Therefore,

[tex]Shear\ Modulus = \frac{20\ N/m^2}{0.008}\\\\[/tex]

Shear Modulus = 2500 Pa = 2.5 KPa

particles q1, q2, and q3 are in a straight line. particles q1 = -5.00 x 10^-6 C, q2 = -5.00 x 10^-6 C. .5 between each what is the net force on q3

Answers

Answer:

1.12

Explanation:

Acellus

Answer: +1.12

Explanation:

This answer works for Acellus! :)

discuss impact of Newton's second law on roads​

Answers

Answer:

The second law: When a force is applied to a car, the change in motion is proportional to the force divided by the mass of the car. This law is expressed by the famous equation F = ma, where F is a force, m is the mass of the car, and a is the acceleration, or change in motion, of the car

An elephant's legs have a reasonably uniform cross section from top to bottom, and they are quite long, pivoting high on the animal's body. When an elephant moves at a walk, it uses very little energy to bring its legs forward, simply allowing them to swing like pendulums. For fluid walking motion, this time should be half the time for a complete stride; as soon as the right leg finishes swinging forward, the elephant plants the right foot and begins swinging the left leg forward.

Answers

Answer:

is this the full question?

Explanation:

A person starts running from 2 m/s to 6 m/s in 2 seconds.
Calculate the person's acceleration.
Var
Variables:
Solve:
F
Formula:

Answers

Answer:

2 m/s²

Explanation:

From the question given above, the following data were obtained:

Initial velocity (u) = 2 m/s

Final velocity (v) = 6 m/s

Time (t) = 2 s

Acceleration (a) =?

The acceleration of the person can be obtained as follow:

v = u + at

6 = 2 + (a×2)

6 = 2 + 2a

Collect like terms

6 – 2 = 2a

4 = 2a

Divide both side by 2

a = 4 / 2

a = 2 m/s²

Therefore, the acceleration of the person is 2 m/s²

Explain how energy that comes from the outside of the Earth system drives the flow of water on surface currents.

Answers

Answer:

The ocean and atmosphere are connected. They work together to move heat and fresh water across the globe. Wind-driven and ocean-current circulations move warm water toward the poles and colder water toward the equator. ... The majority of the thermal energy at the Earth's surface is stored in the ocean.

Explanation:

The ocean and atmosphere are connected. They work together to move heat and fresh water across the globe. Wind-driven and ocean-current circulations move warm water toward the poles and colder water toward the equator. ... The majority of the thermal energy at the Earth's surface is stored in the ocean.

A microphone is attached to a spring that is suspended from the ceiling, as the drawing indicates. Directly below on the floor is a stationary 375-Hz source of sound. The microphone vibrates up and down in simple harmonic motion with a period of 1.80 s. The difference between the maximum and minimum sound frequencies detected by the microphone is 2.75 Hz. Ignoring any reflections of sound in the room and using 343 m/s for the speed of sound, determine the amplitude (in m) of the simple harmonic motion.

Answers

Answer:

[tex]0.361\ \text{m}[/tex]

Explanation:

[tex]f_s[/tex] = Frequency of source = 375 Hz

[tex]\Delta f[/tex] = Difference between the maximum and minimum sound frequencies = 2.75 Hz

v = Speed of sound in air = 343 m/s

T = Time period = 1.8 s

[tex]v_m[/tex] = Maximum speed of the microphone

We have the relation

[tex]\Delta f=2f_s\dfrac{v_m}{v}\\\Rightarrow v_m=\dfrac{\Delta fv}{2f_s}\\\Rightarrow v_m=\dfrac{2.75\times 343}{2\times 375}\\\Rightarrow v_m=1.26\ \text{m/s}[/tex]

Amplitude is given by

[tex]A=\dfrac{v_mT}{2\pi}\\\Rightarrow A=\dfrac{1.26\times 1.8}{2\pi}\\\Rightarrow A=0.361\ \text{m}[/tex]

The amplitude of the simple harmonic motion is [tex]0.361\ \text{m}[/tex].

A laser pulse of duration 25 ms has a total energy of 1.4 J. The wavelength of this radiation is
567 nm. How many photons are emitted in one pulse? Let 1 eV = 1.60 x 10-19 J, the mass of
an electron m=9.11 10-31
kg, the speed of light c= 3.00 x 108 m/s, and Planck's constant h
= 4.136 10-15 eV .s.

Answers

Answer:

n = 4 x 10¹⁸ photons

Explanation:

First, we will calculate the energy of one photon in the radiation:

[tex]E = \frac{hc}{\lambda}\\\\[/tex]

where,

E = Energy of one photon = ?

h = Plank's Constant = 6.625 x 10⁻³⁴ J.s

c = speed of light = 3 x 10⁸ m/s

λ = wavelength of radiation = 567 nm = 5.67 x 10⁻⁷ m

Therefore,

[tex]E = \frac{(6.625\ x\ 10^{-34}\ J.s)(3\ x\ 10^8\ m/s)}{5.67\ x\ 10^{-7}\ m}[/tex]

E = 3.505 x 10⁻¹⁹ J

Now, the number of photons to make up the total energy can be calculated as follows:

[tex]Total\ Energy = nE\\1.4\ J = n(3.505\ x\ 10^{-19}\ J)\\n = \frac{1.4\ J}{3.505\ x\ 10^{-19}\ J}\\[/tex]

n = 4 x 10¹⁸ photons

A vertical piston-cylinder device initially contains 0.1 m^3 of air at 400 K and 100 kPa. At this initial condition, the piston is resting on a stop. The piston-cylinder device is connected to a supply line with air at 400 K and a pressure of 500 kPa. The valve between the supply line and the piston-cylinder device is opened and is left open until the pressure in the piston-cylinder device reaches 500 kPa. The piston is observed to start moving when the pressure in the cylinder is 200 kPa and the piston continues to rise until it reaches a second stop. At the second stop, the piston-cylinder volume is 0.2 m^3 . The final temperature and pressure in the piston-cylinder device are 440 K and 500 kPa, respectively. Determine the heat transfer to or from the piston-cylinder device for the filling process Determine heat transfer (kJ) during the entire process.

Answers

Answer:

[tex]Q=-38.15kJ[/tex]

Explanation:

From the question we are told that

Piston-cylinder initial Volume of air [tex]v_1=0.1 m^3[/tex]

Piston-cylinder initial temperature [tex]T_1=400k[/tex]

Piston-cylinder initial pressure [tex]P_1= 100kpa[/tex]

Supply line temperature[tex]T_s=400k[/tex]

Supply line pressure [tex]P_s= 500kpa[/tex]

Valve  final pressure [tex]P_v=500kpa[/tex]

Piston movement pressure [tex]P_m=200kpa[/tex]

Piston-cylinder final Volume of air[tex]v_2=0.2 m^3[/tex]

Piston-cylinder final temperature [tex]T_2=440k[/tex]

Piston-cylinder final pressure [tex]P_2= 500kpa[/tex]

Generally the  equation for conservation of mass is mathematically given by

[tex]Q=m_2 \mu_2-m_1 \mu_1 +W-(m_2-m_1)h[/tex]

where

Initial moment

[tex]m_1=\frac{p_1 V_1}{RT_1}[/tex]

[tex]m_1=\frac{100*0.1}{0.287*400}[/tex]

[tex]m_1=8.7*10^-^2kg[/tex]

Final moment

[tex]m_2=\frac{p_2 V_2}{RT_2}[/tex]

[tex]m_1=\frac{500*0.3}{0.287*440}[/tex]

[tex]m_1=79*10^{-2}kg[/tex]

Work done by Piston movement pressure

[tex]W=Pd[/tex]

[tex]W=P(v_2-v_1)[/tex]

[tex]W=200(0.2-0.1))[/tex]

[tex]W=20000J[/tex]

Heat function

[tex]h=cT_1[/tex]

[tex]h=1.005(400)[/tex]

[tex]h=402[/tex]

Therefore

[tex]Q=(0.792*0.718(440)-0.0871*0.718(400)+20-(0.792-0.087)*402))[/tex]

[tex]Q=-38.15kJ[/tex]

It is given mathematically that the system lost  or dissipated Heat of

[tex]Q=-38.15kJ[/tex]

Suppose you are working on green house, which light you would
use for their growth?

Answers

Answer:

Fluorescent lighting is usually used.

Explanation:

Answer:

HPS lighting or LED light

Explanation:

HPS light is well known choice with a proven track record for growers. While you can also use LED lights as an alternative to incandescent or HPS fixtures for day length extension.

Does anyone know 19 and 20 ??

Answers

B I think for 19 and D for 20

A system releases 150 kJ of heat while 10 kJ of work is done on the system by
the surroundings. Calculate the change in internal energy (in kJ).

Answers

Answer:

160J OR 140J

Explanation:

Depends on teacher which formula your teacher uses.

U=Q+W OR U=Q-W

Method 1:

U=150+10J=160

U=150-10=140J

During sublimation and deposition, this state of matter is skipped:
A) Solid
B) gas
C) liquid

Answers

The Answer is Liquid

what is a magnetic field? how could you visualize one?

Answers

Answer:

A magnetic field is what causes gravity basically

Explanation:

To visualize a magnetic field think of 2 ovals on the opposite side of each-other, like one oval on the top of a circle and one on the bottom, that's how id visualize it

An incident ray that passes through the vertex of a convex lens:
F
F
c
A. refracts inward, at an angle equal to the angle of incidence,
B. continues in a straight line without refracting.
C. refracts parallel to the axis of the lens,
D. refracts outward, at an angle equal to the angle of incidence.

Answers

the answer is refracts parallel to the axis of the lens

Why are solar storms a concern to Earth?

Answers

Solar radiation can cause an EMP effect and knock out electric grids.

What is a mechanical advantage?

Answers

The answer is C I think

Answer:

B

Explanation:

 A Mechanical Advantage is when you use a piece of machinery to help you do work, and it is an easy advantage.

Given equal time periods, which statement about radioactive waste is correct?
A. Radioactive decay and nuclear fission always generate the same amount of waste.
B. Nuclear fusion generates less radioactive waste than radioactive decay does.
C. Nuclear fusion generates less radioactive waste than nuclear fission does.
D. Nuclear fission generates less radioactive waste than radioactive decay does.

Answers

I think the answer is C

why is a screw a kind of inclined plane

Answers

An inclined plane makes work easier by breaking an upward or downward movement into smaller increments, A screw is like an inclined plane wrapped around a cylinder, A screw turns a small rotational force into a larger forward driving force.

GIVING BRAINLIEST PLEASE HELP!!
-if you answer correctly ill give you brainliest which will give you 25pts-

Answers

Answer:

A, and D are the answers

Explanation:

The pulley. It is located where the bicycle chain and gears are. The chain is wrapped around the pulley which turns and causes the wheel to turn on its axle.

Paper clips, nails, and scissors all act as which of the following?
electromagnets
ion magnets
temporary magnets

Answers

I think its ion magnets correct me if I'm wrong

Two charges are separated by a distance r. The distance between the charges is tripled to 3r. If the original force between the charges was 45N what is the new force between the charges A.5N B.15N C.75N D.135N

Answers

Answer:

5N

Explanation:

The formula formula for calculating the force between charges is expressed as;

F = kq1q2/r²

If two charges are separated by a distance r and a force between  them is 45N, then;

45 = kq1q2/r² ....1

If the distance between the charges is tripled to 3r, then;

F = kq1q2/(3r)²

F = kq1q2/9r² ... 2

Divide both expressions

45/F = (kq1q2/r²)/(kq1q2/9r²)

45/F = kq1q2/r² * 9r²/kq1q2

45/F = 9

9F = 45

F = 45/9

F = 5N

Hence the new force between them will be 5N

A type of organism that makes its own food. __________
The highest taxonomic classification of organisms.__________
The process through which organisms make new organisms of the same kind. _______
The taxonomic classification below domains._________
A type of organism that is made of more than one cell and is more specialized and eukaryotic.__________
A characteristic passed from female and male parents to their offspring.________

FILL IN THE BLANKS PLEASEEE WILL GIVE BRAINLIEST AND 50 POINTS

Answers

Answer:

1. An autotroph

2. Domain

3. Reproduction

4. Kingdom

5. Multicellular Organism

6. Genetic trait

Explanation: Took Bio honors 1 & 2

What is the momentum of a 4 kg object moving west at 4 m/s?*
O 12 kg*m/s (east)
O 1.33 kg*m/s (west)
O 16 kg*m/s (east)
16 kg*m/s (west)

Answers

Answer:

16kg*m/s west

Explanation:

P=M*V

Momentum= Mass time velocity, plug it into the formula,

M is 4 and V is 4, 4*4=16, and since the object is moving west its going to be west.

basically saying in simpler terms,

16=4*4

How old is Earth and what do we use to keep track of major Earth events?​

Answers

earth is 4.543 billion years old

Geothermal energy is an alternative energy source, although it is not resourceful enough to replace more than a minor amount of the Earth’s energy needs. Why is this?

Answers

Answer: However, it is not resourceful enough to replace more than a minor amount of the Earth's energy needs. Drilling through the Earth to reach areas hot enough to create steam is possible, but very expensive and difficult. .

Explanation:

a bullet of mass 120g is fired horizontally into a fixed wooden block with a speed of 20m\s. The bullet is brought to rest in a wooden block in 0.1secs by a constant resistance
calculate the;(I) magnitude of the resistance
(ii) distance moved by the bullet in the wood​

Answers

Answer:

1) F = 24 N

2) Distance = 1 m

Explanation:

We are given;

Mass; m = 120 g = 0.12 kg

Initial velocity; u = 20 m/s

Final velocity; v = 0 m/s since it came to rest.

Time; t = 0.1 s

We can calculate acceleration from Newton's first equation of motion;

a = (v - u)/t

a = (0 - 20)/0.1

a = -200 m/s²

1) magnitude of the resistance will be;

F = ma

F = 0.12 × (-200)

F = -24 N

Since, we are dealing with the magnitude, we will take the absolute value. Thus, F = 24 N

2) To find the distance moved by the bullet, we know that;

Distance = Average speed × time

Thus;

Distance = ((v + u)/2) × t

Distance = ((0 + 20)/2) × 0.1

Distance = 1 m

It takes 5000 J of work to lift a crate to a height of 5 m in 10 s of time.. Calculate the power.

Answers

Answer:

P = 500 W

Explanation:

Given that,

Work done to lift a crate to a height of 5 m is 5000 J

It takes 10 s

We need to find the power of the crate. We know that power is the rate of doing work. Mathematically, it can be given by :

[tex]P=\dfrac{W}{t}\\\\P=\dfrac{5000}{10}\\\\P=500\ W[/tex]

So, the power of the crate is equal to 500 W.

A plumber is going to put two pipes in a wall, one in front and one in back. The pipes will be touching once they are installed. Both pipes are the same size and have the same number of molecules. The diagram above shows the pipes now, before they have touched. Use the information in the diagram to answer the question.

How does the temperature of the front pipe compare with the temperature of the back pipe before the pipes touch? What will happen after the pipes have been touching for a while?

Answers

Answer:

They become the same exact tempature

Explanation:

Since they got connected it should be the same.

the temperature of the front pipe compare with the temperature of the back pipe before the pipes touch by using same temperature.

what is temperature ?

Temperature is the measure of hotness or coldness expressed in terms of any of several arbitrary scales and it indicate the direction in which heat energy will spontaneously flow from a hotter body to a colder body.

It is not the equivalent of the energy of a thermodynamic system like burning match is at a much higher temperature than an iceberg whereas the total heat energy contained in an iceberg.

Temperature which is similar to pressure or density known as intensive property  that is independent of the quantity of matter is considered as distinguished from extensive properties, such as mass or volume.

For more details regarding temperature, visit

https://brainly.com/question/23411503

#SPJ2

Other Questions
active to passiveplz help, Help meee plzzzzzzzzz Stacy started with $40 In a savings account that earns 5% annually. How much interest will she get in one year? Foreign households and foreign firms demand U.S. dollars in exchange for foreign currency for all of the following, except A. when currency traders want dollars because they expect that the value of the dollar in the future to be greater than its current value. B. when U.S. firms and households want foreign currencies so that they can buy goods and services produced in those foreign countries. C. when foreign firms and households want dollars so that they can buy goods and services produced in the United States. D. when foreign firms and households want to invest in the United States either through foreign direct investment or through foreign portfolio investment. PLSSS HELP I CANT GET THIS WRONG PLSSS HELPPPPP PLSSSSSCheetahs have come close to extinction due to hunting, drought, and disease. This has caused a decrease in the genetic variation in their populations. Which of the following is a result of the limited genetic variation?A. Cheetahs in current populations are more resistant to new diseases.B. The survival rate of young cheetahs is increased.C. Cheetahs have greater mate choice.D. The cheetah populations are less likely to be able to adapt to environmental changes. help me please!!!!The area of a circle is 153.86 square meters. What is the diameter of the circle? Use 3.14 for . A. 7 m B. 14 m C. 24.5 m D. 49 A school sport's team sold hats for $12 each hat. The team made a profit of $3 for each hat sold. What percent of the selling price of each hat is the profit? You buy 25 pounds of tomatoes need 1.7 ounces how many portions can be made . A piece of molding is 12 3/4 feet long. How many 2 1/8-foot pieces can be cut from the this piece of molding? * How energy is converted from one form to other I have a box that is 5 inches wide 2 inches deep and 4 inches tall I want to fill with sand. how much sand can I fit inside the box? 1.Kenneth's garden is in the shape of a rectangle. The length is20 feet and it has a perimeter of 70 feet, How long is thediagonal of his garden. 1. How does Carlotta's mother cheer up Carlotta after Bumpy is lost? A. She tells her a story about Italy and a game they played with pigs. B. She makes her a special Italian treat. 2. Carlotta refuses to give her pig to Theresa. TRUE FALSE 7. Cells will generally divide when? * (NO LINKS)~engLiSH~Ill mark brainliest if correct Which is the focus of lyric poetry?O A. Personal feelingsOB. Rhetorical positionsO C. Political statementsO D. Historical narratives HELP HELP OH PLS YES PLS HELP Identify the 3D shape shown below. Choose 1 answer: A Cone B Cylinder Rectangular prism 9975 If the ultraviolet light damages the DNA what will be its effect on the protein synthesis? [Serious Answers pls] 1. Given the following unbalanced equation:Al(SO3)3 + NaOH---> Na2SO3 + Al(OH)3If you start with 389.4 grams of Al(SO3)3 and 200 grams of NaOH ?Identify the limiting reactant:Identify the reactant in excess and by how much:How many grams of Na2SO, will be produced:If you perform the same reaction but get 212.4 grams of Na2SO3, what isyour percent yield?