PLEASE SHOW WORK!!!!!!!!!

Answer:

Step-by-step explanation:

Answer:

[tex](250*50-102)+152[\tex]

The correct mean of the 50 observations is 249.96.

To find the correct mean, we need to adjust the value that was wrongly copied. The difference between 152 and 102 is 50, so the corrected total of the 50 observations would be:

Corrected total = (original total - 102) + 152

= [tex](250*50-102)+152[/tex]

= [tex]12498[/tex]

Therefore, the correct mean of the 50 observations is:

Correct mean = Corrected total / Number of observations

= [tex]12498 / 50[/tex]

= 249.96

Hence, the correct mean of the 50 observations is 249.96.

To learn more about Mean,

https://brainly.com/question/26547285?referrer=searchResults

For Mike's Bakery the total expenses will be $3528 and the total receipts will be $3920  and it will take 392 hours.

Let number of hours the bakery needs to operate in order to make back the amount it invested in equipment be = "h".

To find "h", we need to find the profit per hour,

The profit per hour is = difference between hourly receipts and hourly operating costs;

Profit per hour = Hourly receipts - Hourly operating costs

Profit per hour = $10 - $9

Profit per hour = $1

The total profit required to make back the $392 investment is = $392,

We know that,

⇒ Total profit = (Profit per hour) × (Number of hours)

⇒ $392 = $1 × h

⇒ h = $392/$1

⇒ h = 392

So, bakery needs to operate for 392 hours to make back the amount it invested in equipment.

To calculate the total expenses and receipts, we can use the following formulas:

⇒ Total expenses = (Operating costs) × (Number of hours)

⇒ Total expenses = $9 × 392

⇒ Total expenses = $3528

⇒ Total receipts = (Hourly receipts) × (Number of hours)

⇒ Total receipts = $10 × 392

⇒ Total receipts = $3920

Therefore, the total expenses is $3528 and total receipts is $3920.

Learn more about Expense here

https://brainly.com/question/20931468

#SPJ4

Answer:

To solve this problem, we can use the formula for exponential decay:

m = m0(1 - r)^t

where:

m0 = initial mass (300 grams)

r = decay rate (6% per day, or 0.06)

t = time in days

We want to find the mass at the beginning of the 16th day, so t = 15:

m = 300(1 - 0.06)^15

m ≈ 107.4

Therefore, the mass of the radioactive sample at the beginning of the 16th day of the experiment is approximately 107.4 grams.

The answer of the given question based on perimeter of trapezoid the ratio will be  x:y is 8:5.

A trapezoid is quadrilateral with at least one pair of the parallel sides. The parallel sides are called  bases of  trapezoid, and  non-parallel sides are called legs.

Let's denote the lengths of the four sides of Trapezoid 1 as a, b, c, and d, and the lengths of the corresponding sides of Trapezoid 2 as m, n, p, and q, respectively. Then we have:

a + b + c + d = 240 (perimeter of Trapezoid 1)

m + n + p + q = 150 (perimeter of Trapezoid 2)

Since Trapezoid 1 and Trapezoid 2 are similar, we can write:

m = ax

n = bx

p = cy

q = dy

where x and y are the ratios of the longer and shorter bases of Trapezoid 1 to Trapezoid 2, respectively.

Substituting these expressions into the equations for the perimeters of the trapezoids, we get:

a(x+y) + b(x+y) + c(x+y) + d(x+y) = 240

(ax+bx+cy+dy) = 150

Simplifying these equations, we get:

(a+b+c+d)(x+y) = 240

(a+b+c+d)(x+y)(x/y) = 150

by Dividing  second equation by  first, we will get:

x/y = 240/150 = 8/5

Therefore, the ratio x:y is 8:5.

To know more about Expressions visit:

https://brainly.com/question/1859113

#SPJ9

[tex]\textit{arc's length}\\\\ s = \cfrac{\theta \pi r}{180} ~~ \begin{cases} r=radius\\ \theta =\stackrel{degrees}{angle}\\[-0.5em] \hrulefill\\ r=8\\ \theta =90 \end{cases}\implies s=\cfrac{(90)\pi (8)}{180}\implies s=4\pi[/tex]

A two-way relative frequency table, in general, is an effective instrument for analysing paired data because it offers a succinct and clear summary of the relationship between the variables, enabling us to spot patterns and conduct methodical hypothesis testing.

A tool used to display the connection between two sets of paired data is a two-way relative frequency table, which arranges the data in rows and columns. The frequency of each combination is indicated in the chart, which can also be used to determine its relative frequency, which is calculated as the frequency of the combination divided by the total number of observations.

The benefit of using a two-way relative frequency table to illustrate relationships between pairs of paired data is that it gives a more comprehensive image of the data and the interrelationships between the variables. More specifically, it enables us to:

Finding patterns and trends is simple thanks to the table's presentation of the data. We can see which combinations are more or less prevalent than others by examining the relative frequencies of each set of values, and we can spot patterns in the data that might not be obvious otherwise.

Calculate conditional probabilities: Conditional probabilities are the likelihoods of one event given the occurrence of another event, and they can be determined using the chart. We can determine the likelihood that a smoker is male or female and the likelihood that a non-smoker is male or female, for instance, if we have a two-way table illustrating the connection between gender and smoking status.

Testing hypothesis: The table can be used to evaluate theories about how the variables are related to one another. A chi-square test, for instance, can be used to determine whether gender and smoking status are significantly associated.

In general, a two-way relative frequency table is an effective tool for analysing paired data because it offers a succinct and clear summary of the relationship between the variables, enabling us to spot patterns and test theories in a methodical manner.

Learn more about frequency here:

https://brainly.com/question/5102661

#SPJ4

As per the given question, the length of the square shed is 8 meters.

Length of the sheet = 4m

Width of the sheet = 16m

A rectangle is a sort of quadrilateral with parallel sides that are equal to one another and four vertices that are all 90 degrees apart. Since a rectangle's opposite sides are both equal and parallel, a parallelogram is another name for this geometric shape.

Using the formula for the area of the rectangle -

Area = Length x Width

Now,

Let the length of the square shed be x, therefore -

x² = 4(16) = 64

x = √64

= 8

Complete Question:

Two storage sheds are to have the same area. One is square and one is rectangular. The rectangular she is 4 meters wide and 16 meters long. What is the length of the square shed?

Read more about rectangles on:

https://brainly.com/question/25292087

#SPJ4

Answer:

72mph

Step-by-step explanation:

To convert km/hr into m/s, simply multiply the speed value by 5/18

To convert 8Km/hr to m/s, multiply 8 by 5/18 or divide by 3.6

8 x 5/18 = 2.22m/s

You can say that 2.22m/s = 5mph since 8km/hr = 5mph

If 2.2m/s =5mph, 1m/s = 5mph/ 2.2 (Divide both sides by 2.2)

Then 32m/s = 5mph/2.2 x 32

2.25 x 32 = 72 mph

Using the conversion, 32 m/s is equivalent to 72 mph.

We have,

To convert 32 m/s to mph using the conversion factor 8 km/h = 5 mph,

We can follow these steps:

- Convert 32 m/s to km/h by multiplying by the conversion factor:

32 m/s x (3.6 km/h / 1 m/s) = 115.2 km/h

- Convert 115.2 km/h to mph using the conversion factor 8 km/h = 5 mph:

115.2 km/h x (5 mph / 8 km/h) = 72 mph

Therefore,

Using the conversion, 32 m/s is equivalent to 72 mph.

Learn more about unit conversion here:

https://brainly.com/question/13899873

#SPJ6

These matrices have various dimensions, making it difficult to determine their total. Because of this, the sum of these matrices is either undefinable or unattainable.

Due to their various dimensions, it is difficult to find the sum of these matrices.

One row and three columns make up the second matrix, whereas two rows and one column make up the first matrix. Two matrices can only be added if they share the same dimensions. To be more precise, two matrices can only be added if they have the same number of rows and columns.

The matrices [3 -8] and [4 -5 -6] cannot be added together since they have different numbers of rows and columns. Because of this, the sum of these matrices is either undefinable or unattainable.

learn more about dimensions here:

https://brainly.com/question/28688567

#SPJ4

Angle between vector a and vector b is 0 degrees or 180 degrees.

What is vector?

A vector is a quantity that not only indicates magnitude but also indicates how an object is moving or where it is in relation to another point or item. Euclidean vector, geometric vector, and spatial vector are other names for it.

In mathematics, a vector's magnitude is defined as the length of a segment of a directed line, and the vector's direction is indicated by the angle at which the vector is inclined.

What is scalar quantity?

Physical quantities with merely magnitude and no direction are referred to as scalar quantities. These physical quantities can be explained just by their numerical value without any further guidance. These physical values can be added according to the basic algebraic rules, and in this case, only their magnitudes are added.

GIVEN:

If vector a is equal to k (scalar quantity)times vector b.

then vector a and vector b are parallel to each other.

The angle between two parallel vectors is 0 degrees or 180 degrees.

So, the angle between vector a and vector b is

0 degrees or 180 degrees.

To know more about scalar and vector quantity visit:

brainly.com/question/774036

#SPJ1

Answer:

The volleyball is 14 feet above the ground at the instant the pl;ayer begins her jump.

B is correct.

Step-by-step explanation:

Here we have two situation of system of models.

[tex]\text{The height (h) of a falling volleyball as function of time (t):h}(t)=14-16t^2[/tex]

[tex]\text{The height (h) of the hands of a player as function of time (t):h}(t)=7-24t-16t^2[/tex]

We need to find the height of ball above the ground at the instant the player begins jump.

At t=0, player begins jump.

We put t=0 into [tex]h(t)=7+24t-16t^2[/tex]

Height of player hand at t=0 , h=7 feet.

Now we will set t=0 for first model.  

[tex]h(0)=14-16\times0^2 \ = > 14[/tex]

Thus, The volleyball is 14 feet above the ground at the instant the pl;ayer begins her jump.

B is correct.

Answer: B

Step-by-step explanation:

EDGE 2023

Answer:

x = 48

Step-by-step explanation:

given a line parallel to a side of a triangle and it intersects the other two sides, it divides those sides proportionally, that is

[tex]\frac{x}{18}[/tex] = [tex]\frac{56}{21}[/tex] ( cross- multiply )

21x = 18 × 56 = 1008 ( divide both sides by 21 )

x = 48

(a) The exploratory factor analysis (EFA) can be useful in two ways: Dimensional Reduction: The dimensionality of a set of data can be reduced by exploratory factor analysis. Rather than dealing with several variables, it identifies the basic factors that describe the data set. This can be achieved by extracting factor information that shows the covariance structure of the variables that underlie the observations. Investigation of latent variables: Exploratory factor analysis can be used to determine whether an underlying dimension, such as depression or anxiety, underlies a collection of observable variables, such as feelings of depression, nervousness, or irritability. Latent variables are those that cannot be observed directly. (b) Factor analysis and principal component analysis are two techniques for data reduction that are frequently confused. The principal component analysis, on the other hand, is a technique that creates uncorrelated variables to replace the original variables. It can be viewed as a special case of factor analysis in which all of the extracted factors are used. It includes the raw data's total variance, which is defined by a few components. Principal component analysis is a method of data reduction that extracts uncorrelated factors from the original variables. The correlation structure of the original variables is utilized in factor analysis to define the underlying factors.

Learn more about  exploratory factor analysis (EFA)

brainly.com/question/30974361

#SPJ4

256 is the lateral surface area.

What's the lateral surface area?  

Side indicates the side of  commodity. thus, lateral surface area is  set up by chancing  the  face area of the sides of the object.

                                 This is done by chancing  the border of the base and multiplying it by the height of any three- dimensional figure.

For the given situation,

The sides of the triangle are 5 cm, 6 cm, 5 cm.

The length of the prism = 16 cm

The formula for lateral surface area of triangular prism is

LSA = (perimeter)(length)

On substituting the above values,

 LSA = (5 + 6 + 5)(16)

        = (16)(16)

         = 256

Learn more about lateral surface area

brainly.com/question/14001755

#SPJ1

The remainder when f(x)=-6x^23+x^11-x^6+2x is divided by x+1 is -7.

Explanation: In this question, we can solve the problem by using the Remainder Theorem. The remainder theorem states that when we divide a polynomial f(x) by x−a then we get a remainder equal to f(a). So, here we can take a=−1 and find the remainder of f(x).

Here is the given polynomial,

()=−6^23+^11−^6+2

We are asked to find the remainder when f(x) is divided by x+1. Using the remainder theorem, we can find the remainder of f(x) by evaluating f(−1).

(−1)=−6(−1)^23+(−1)^11−(−1)^6+2(−1)=6+1+1−2=6

Now, we have the remainder as 6. However, we need the remainder when f(x) is divided by x+1. The relationship between the remainder and the divisor of a polynomial is that when we divide a polynomial f(x) by x−a, we get a remainder of r(x) such that:

()=(−)()+()

where q(x) is the quotient of the division.

So, the question asks us to divide the polynomial f(x) by x+1 and get the remainder. Here is the long division of f(x) by x+1:

The remainder is −7. Therefore, the remainder when f(x) is divided by x+1 is -7.

For further information on Polynomials, refer below:

https://brainly.com/question/11536910

#SPJ11

Answer: 104

Step-by-step explanation:

If .6 or 60% of the animals in the shelter are dogs, then we can multiply .6 by 260 to get how many are dogs.

.6 times 260 is 156.

260-156=104.

Answer: 3π

Step-by-step explanation:

360 - 90 = 270°

Perimeter of full circle = πd = 4π

Arc length = [tex]\frac{270}{360}[/tex] × 4π = 3π

Answer:

2.5 oz each

Step-by-step explanation:

2 boys and 2 girls

10 divided by 2 is 5, 5 is not an even number.
there would be 2 left after our calculation.
meaning that 2 in half's (hence .5)  is 4 so each child would get 2.5 oz of paint.

Hope this helps, thanks :)

Answer: 2 1/2

Step-by-step explanation:

[tex]\textit{volume of a cone}\\\\ V=\cfrac{\pi r^2 h}{3}~~ \begin{cases} r=radius\\ h=height\\[-0.5em] \hrulefill\\ r=12\\ V=1281.12 \end{cases} \implies 1281.12=\cfrac{\pi (12)^2 h}{3} \\\\\\ (3)(1281.12)=144\pi h\implies \cfrac{(3)(1281.12)}{144\pi }=h\implies 8.50\approx h[/tex]

75 % of the college students will take more than 4.25 minutes when trying to find a parking spot in the library parking lot.

Actual experiments and sufficient documentation of the occurrence of occurrences serve as the foundation for experimental probability, sometimes referred to as empirical probability. A number of real experiments are carried out in order to ascertain the likelihood of any event. Random experiments are studies that don't have a predetermined outcome. The results of such tests are unpredictable. The chance of random experiments is calculated repeatedly. A trial is a repeating of an experiment that is performed a certain number of times.

Given that, mean of 3.5 minutes and a standard deviation of 1 minute.

Now, for 75% we have:

P(X > x) = 0.75

The z-score is given by:

0.75 = (X - μ) / σ

Substituting the formula we have:

0.75 = (X - 3.5) / 1

0.75 = X - 3.5

X = 0.75 + 3.5 = 4.25.

Hence, 75 % of the college students will take more than 4.25 minutes when trying to find a parking spot in the library parking lot.

Learn more about z-score here:

https://brainly.com/question/30557336

#SPJ1

The number of bald eagles in the state in the winter of 1999 is 273.909, where The number of bald eagles in a state during the winters from 1996 to 2002 can be modeled by the quartic function.

by the given information the equation is

[tex]f(x) = -3.439(x)^4 + 35.952(x)^3 - 99.139(x)^2 + 41.541(x) + 178.192[/tex]

where x = number of years since 1996

The given quartic function must be changed to x = 3 in order to determine the number of bald eagles in the state during the winter of 1999:

[tex]f(3) = -3.439(3)^4 + 35.952(3)^3 - 99.139(3)^2 + 41.541(3) + 178.192[/tex]

When we condense this expression, we get:

f(3) = -3.439(81) + 35.952(27) - 99.139(9) + 41.541(3) + 178.192

f(3) = -1107.759 + 970.104 - 892.251 + 124.623 + 178.192

f(3) = 273.909

Hence, in the winter of 1999, there were roughly 273.909 bald eagles in the state.

learn more about the quartic function

brainly.com/question/30180400

#SPJ4

Answer: To find the equation that passes through (4, 8), we need to check which equation contains that point.

Line A has an equation of y = (2/5)x + (194/5). Plugging in x = 4, we get y = (2/5)(4) + (194/5) = 198/5, which is not equal to 8.

Line B has an equation of y = (-5/5)x + 30. Plugging in x = 4, we get y = (-5/5)(4) + 30 = 26, which is not equal to 8.

Line C has an equation of y = (13/13)x - 7. Plugging in x = 4, we get y = (13/13)(4) - 7 = -3, which is not equal to 8.

Line D has an equation of y = (-27/7)x + (491/7). Plugging in x = 4, we get y = (-27/7)(4) + (491/7) = 377/7, which is not equal to 8.

Therefore, none of the given equations has (4, 8) as its solution.

Step-by-step explanation:

Answer:

1/2 of the pool is filled, and in the second situation, the entire pool is filled.

Step-by-step explanation:

Let's start by finding the hourly filling rate of each pump. The first pump can fill the pool in 4 hours, so its hourly rate is 1/4 of the pool. The second pump can fill the pool in 6 hours, so its hourly rate is 1/6 of the pool.

For the first situation, the first pump works for 2 hours, so it fills 2/4 or 1/2 of the pool. The second pump does not work in this situation, so it fills 0 of the pool. Therefore, the total amount of the pool filled is 1/2.

For the second situation, the first pump works for 2 hours and fills 1/2 of the pool. The second pump works for 3 hours and fills 3/6 or 1/2 of the pool. Therefore, the total amount of the pool filled is 1/2 + 1/2 = 1.

So, in the first situation, 1/2 of the pool is filled, and in the second situation, the entire pool is filled.

Answer:

The length of line segment CD is 10.3 units (rounded to 2 decimal places).

Step-by-step explanation:

To find the length of line segment CD, we need to use the distance formula, which is:

Distance = √[(x2 - x1)^2 + (y2 - y1)^2]

Here, (x1, y1) = (1, -5) and (x2, y2) = (6, 4).

So, substituting these values in the distance formula, we get:

Distance = √[(6 - 1)^2 + (4 - (-5))^2]

= √[5^2 + 9^2]

= √(25 + 81)

= √106

≈ 10.3 (rounded to 2 decimal places)

Therefore, the length of line segment CD is 10.3 units (rounded to 2 decimal places).

Hope this helps!

Answer:

  115°

Step-by-step explanation:

You want the measure of angle S opposite angle (4x+5)° in an inscribed quadrilateral in which the other two angles are (5x-2)° and (7x+2)°.

The measure of an inscribed angle is half the measure of the arc it intercepts.

Two opposite angles in an inscribed quadrilateral intercept arcs that total the full circle.  Since the sum of double those angles is 360°, the sum of opposite angles of an inscribed quadrilateral is 180°—they are supplementary.

We can use this to find the value of x:

  (5x -2)° +(7x +2)° = 180°

  12x = 180 . . . . . . simplify

  x = 15 . . . . . . . divide by 12

Now, the angle opposite S can be found to be ...

  (4x +5)° = (4·15 +5)° = 65°

Angle S is the supplement of this:

  S = 180° -65°

  S = 115°

Answer: To find the relative frequency for each discount, we need to divide the number of customers who received each discount by the total number of customers.

Discount           Number of customers                          Relative Frequency

10%                    70                                                            0.35

25%                   99                                                            0.495

30%                   31                                                             0.155

To determine if it is appropriate for the manager to want approximately half of the customers to receive the 25% discount, we can calculate the relative frequency for the 25% discount and compare it to 0.5 (or 50%).

Relative frequency for 25% discount = 99/200 = 0.495

Since the relative frequency for the 25% discount is already very close to 0.5, it seems like an appropriate method to achieve the manager's goal. However, it's worth noting that this method may not be the most effective in terms of maximizing profits or customer satisfaction. It's always important for businesses to carefully consider their pricing strategies and discount policies.

Step-by-step explanation:

The volume of the hemisphere with diameter 9 is approximately 76.0435 cubic units.

What is hemisphere ?

A hemisphere is a three-dimensional geometric shape that consists of half of a sphere. It is formed by slicing a sphere into two equal parts along a plane that passes through its center. The term "hemisphere" comes from the Greek words "hemi," meaning half, and "sphaira," meaning sphere.

A hemisphere has a curved surface that is a portion of a sphere's surface, as well as a flat circular base that is formed by the plane of the cut. The diameter of the base is equal to the diameter of the original sphere, and the radius is half of the diameter.

To find the volume of the hemisphere, we first need to know its formula. A hemisphere is half of a sphere, so its volume is half of the volume of a sphere with the same radius.

The formula for the volume of a sphere is:

V = (4/3)πr³

where V is the volume and r is the radius.

Since the hemisphere has diameter 9, its radius is half of the diameter, which is:

r = 9/2 = 4.5

Substituting the value of r in the formula for the volume of a sphere, we get:

V = (4/3)π(4.5)³

V = (4/3)π(91.125)

V = 152.087

Since the hemisphere is half of a sphere with radius 4.5, its volume is half of the volume of that sphere, which is:

V_hemisphere = (1/2)V_sphere

V_hemisphere = (1/2)(4/3)π(4.5)³

V_hemisphere = 76.0435

Therefore, the volume of the hemisphere with diameter 9 is approximately 76.0435 cubic units.

To know more about volume visit :-

https://brainly.com/question/463363

#SPJ1