Answers
Answer:
The answer is B.
Explanation:
Given that the current (Ampere) in a series circuit is same so we can ignore it. We can assume that the total voltage is 60V and all the 3 resistance are different, 20Ω, 40Ω and 60Ω. So first, we have to find the total resistance by adding :
Total resistance = 20Ω + 40Ω + 60Ω
= 120Ω
Next, we have to find out that 1Ω is equal to how many voltage by dividing :
120Ω = 60V
1Ω = 60V ÷ 120
1Ω = 0.5V
Lastly, we have to calculate the voltage at R1 so we have to multiply by 20 (R1) :
1Ω = 0.5V
20Ω = 0.5V × 20
20Ω = 10V
Related Questions
Which reverses the flow of current through
an electric motor?
Answers
Answer:
a commutator
Explanation:
Janaki Temple and Pashupatinath Temple are increasing our pride how
Answers
Answer:
Janaki temple and Pashupatinath Temple are found in Nepal. These structures are religious and they increase the pride of the country through tourism. These temples are important in the country and are mostly visited by tourists.
This also helps to bring in income for the country and also helps by attracting many visitors and a corresponding development of its tourism industry.
8. You have two iron rods which are identical in appearance, but one is a permanent magnet and the other is unmagnetized. What series of simple experiments can you perform, using only the two rods, which will allow you to determine which of the rods is the permanent magnet
Answers
Answer:
Explanation: Let assume that bars are labeled A and B
Method 1
Using just the identical appearing bar magnet and unmagnetized iron bar.
Place the end of bar A in the middle of bar B.
If bar A sticks to bar B, then bar A is the magnet and bar B the umagnetized iron bar.
If bar A jumps to one of the ends of bar B, then bar B is the magnet.
Reason been that the magnetic field on a bar magnet is greatest at the two poles where the field comes out of the magnet. The center, between the poles, will be the weakest part of the field.
Method 2
Another solution would be to separate the two by quite some distance, float them on a piece of cork/wood in a plastic bucket or suspend them from long strings, then see which one consistently (eventually) lines up tending towards the Earth’s magnetic field.
A carpenter measured the lengeth of a small piece of timber as 24.6cm .Calculate the relative error in the measurement if the true length is 24.5cm
Answers
ANSWER:
0.4081%
Explanation:
Difference=24.6-24.5=0.1
Relative error = 0.1/24.5*100=0.4081%
Relative error is equal to the = difference between both the values/The true value *100
Can someone please help me?
An alien spaceship is 650 m above the ground and moving at a constant velocity of 175 m/s upwards.
How high above the ground is the ship after 5 seconds?
Answers
Answer:
1525 meters above ground
Explanation:
So to do this you will need to write this in slope intercept form or [tex]y=mx+b[/tex]. So 650 would be the b, 175 would be the m, and the x would be 5 so the equation would be [tex]y=175(5)+650[/tex] so if you solve or simplify the equation you will get 1525 meters above the ground and that would be our final answer.
Ozone molecules in the stratosphere absorb much of the harmful radiation from the sun. How many ozone molecules are present in 2.00 L of air under the stratospheric ozone conditions of 275 K temperature and 1.89 × 10−3 atm pressure?
Answers
Answer:
1.01×10^20 molecules of ozone.
Explanation:
Data obtained from the question include:
Volume (V) = 2 L
Temperature (T) = 275 K
Pressure (P) = 1.89×10¯³ atm
Gas constant (R) = 0.0821 atm.L/Kmol
Number of mole (n) of ozone =.?
Using the ideal gas equation, we can obtain the number of mole of ozone as follow:
PV = nRT
1.89×10¯³ x 2 = n x 0.0821 x 275
Divide both side by 0.0821 x 275
n = (1.89×10¯³ x 2) /(0.0821 x 275)
n = 1.67×10¯⁴ mole.
Therefore the number of mole of ozone in 2 L of air is 1.67×10¯⁴ mole.
Finally, we shall determine the number of molecules present in 1.67×10¯⁴ mole of ozone.
This can be obtained as follow:
From Avogadro's hypothesis, 1 mole of any substance contains 6.02×10²³ molecules. This implies that 1 mole of ozone contains 6.02×10²³ molecules.
If 1 mole of ozone contains 6.02×10²³ molecules,
therefore, 1.67×10¯⁴ mole of ozone will contain = 1.67×10¯⁴ x 6.02×10²³ = 1.01×10^20 molecules.
Therefore, 1.01×10^20 molecules of ozone are present in 2 L of air.
A car engine burns gas at 495 K and exhausts to the air at 293 K. What is the highest possible efficiency it could have?
(NO UNIT)
Answers
Answer:
59.19%
Explanation:
Step 1:
Data obtained from the question. This include the following:
Input temperature = 495 K.
Output temperature = 293 K.
Efficiency =..?
Step 2:
Determination of the efficiency of the engine.
Efficiency is simply defined as the ratio of output to input times 100. Mathematically, it is expressed as:
Efficiency = output /input x 100
With the above formula, we can calculate the efficiency of the engine as follow:
Input temperature = 495 K.
Output temperature = 293 K.
Efficiency =..?
Efficiency = output /input x 100
Efficiency = 293/495 x 100
Efficiency = 59.19%
Therefore, the efficiency of the engine is 59.19%
Answer:
0.41
Explanation:
Trust me bro
Velocity is a description of an object’s blank
Answers
Velocity is the description of an object's motion from one point to another.
It tells the speed with which the trip is completed, and the direction from the start-point to the end-point. It tells nothing about any twists, turns, loops, bends, or stops along the way.
Culture creates the context for behavior in society. true or false
Answers
Answer:
True every culture is diffrent and culture is the way to grow up, the people or things you live around, or the ways of life you follow or dress.
Explanation: The definition of culture is: means a particular set of customs, morals, codes and traditions from a specific time and place. All of that develops how a person may behave in society.
Answer:
true
Explanation:
just took the quiz
A uniform string of length 10.0 m and weight 0.32 N is attached to the ceiling. A weight of 1.00 kN hangs from its lower end. The lower end of the string is suddenly displaced horizontally. How long does it take the resulting wave pulse to travel to the upper end
Answers
Answer: 0.0180701 s
Explanation:
Given the following :
Length of string (L) = 10 m
Weight of string (W) = 0.32 N
Weight attached to lower end = 1kN = 1×10^3
Using the relation:
Time (t) = √ (weight of string * Length) / weight attached to lower end * acceleration due to gravity
g = acceleration due to gravity = 9.8m/s^2
Weight of string = 0.32N
Time(t) = √ (0.32 * 10) / [(1*10^3) * (9.8)]
Time = √3.2 / 9800
= √0.0003265
= 0.0180701s
Imagine that your standing on a beach but cannot swim. Your friend encourages you to walk into the surf zone created by incoming deep-water waves that have a wavelength of 30 meters. Would it be safe to walk out to where the waves are breaking? Explain how you arrived at your answer.
Answers
Answer:
It would not be safe to walk out to where waves are breaking due to the effect of rip currents
Explanation:
The water depth in the surf zone is between 5 to 10 meters deep and with a wavelength of 30 meters, the speed of the wave is considerably fast such that control for safety may be difficult
Also the speed of the wave is directly related to the depth of the water which means that where the wave described above is fast as well as the rip current, also the water depth is expected to be considerable for a non swimmer
It is best to seek for sign post regarding safe areas and do not go into the water where there are no lifeguards or marked safe zones.
It won't be safe to walk out to where the waves are breaking.
This is because the wavelength is 30 meters which is a characteristic of
areas with significant water depth in the range of 5-11 meters.Under these
conditions the waves are usually very fast and may get swept with the
current from the water waves when trying to run from it.
It is recommended that we stay in areas where the depth is noted as not
being much and should always seek help and clarity from the life guards so
as to prevent drowning and death.
Read more on https://brainly.com/question/17125479
Which of the following object is in dynamic equilibrium?
Answers
Answer:
A car driving in a straight line 20 m/s
Explanation:
ayepecks silly
Question 1 of 10
What is a neutron
A. A particle inside the nucleus that has no charge
B. A positive particle inside the nucleus
O C. A negative particle outside the nucleus
O D. A negative particle inside the nucleus
Answers
Answer:
The neutron is a subatomic particle, symbol
n
or
n0
, with no electric charge and a mass slightly greater than that of a proton. Protons and neutrons constitute the nuclei of atoms. Since protons and neutrons behave similarly within the nucleus, and each has a mass of approximately one atomic mass unit, they are both referred to as nucleons.[6] Their properties and interactions are described by nuclear physics.
Explanation:
pls mark me as BRAINLIEST
formula of minimmum pressure
Answers
Answer:
pressure=force/area
Law of conservation
of momentum
Answers
Answer:
Explanation:
Law of conservation of momentum is applied in solving collision problem. When two body collides, their momentum after collision can be determined using the law.
The law States that the sum of momentum of two bodies before collision is equal to the sum of their momentum after collision. Before collision, both bodies moves with a different velocity while during some cases, the bodies moves with a common velocity after collision.
Whether they move with or without the same velocity depends on the type of collision that exists between them after the collision. After collision, some object sticks together and move with a common velocity while some doesn't.
If the bodies sticks together after collision, the type of collision that occur is inelastic (energy is not conserved) and if they splits after collision, the type of collision that occur is an elastic collision (energy is conserved).
Let m1 and m2 be the masses of the bodies
u1 and u2 be their velocities before collision
v1 and v2 be their velocities after collision.
According to the law;
m1u1 + m2u2 = m1v1 + m2v2
Note that momentum = mass × velocity of the body.
By starting with a falsifiable hypothesis and proceeding to gather data and ensure replicability, a scientist can contribute to the potential formation of a(n)
Answers
Answer:
theory
Explanation:
A scientist can contribute to the formation of a theory in a particular subject by conducting research along the line of that subject.
Conducting research requires the formation of a hypothesis and testing the hypothesis by conducting a relevant experiment during which data are gathered, analyzed, and interpreted in order to falsify or accept the hypothesis.
A good experiment must be replicate-able. When the same experiment is repeated by different independent researchers and the same conclusion is arrived at, this could potentially lead to the formation of a theory.
Hence, a scientist can contribute to the formation of a theory by conducting an experiment with replicability in order to test a hypothesis.
Salt compounds are commonly used to melt ice that forms on sidewalks in the winter. A common chemical that is used to melt sidewalk ice is calcium chloride, CaCl2(s). When calcium chloride dissolves into solution is releases thermal energy which aides in melting
the ice.
The molar mass of water is 18.02 g/mol
The thermal energy, in kilojoules (kJ) that must be released from the calcium chloride,
CaCl2(s), to melt 10.0 kg of ice, expressed in scientific notation is a.bc x 104 k).
46
55
The values of a, b, c, and d.
Answers
Answer:
The values of a, b, c and d are
a = 3, b = 3, c = 4 and d = 3
Explanation:
The quantity of heat needed to melt the ice is given by Q = mL where m = mass of ice and L = latent heat of fusion of ice = 334 kJ/kg. This quanity of heat is also the thermal energy needed to be released by the calcium chloride, CaCl₂
Now, the mass of ice = 10 kg. So,
Q = mL
Q = 10 kg × 334 kJ/kg
Q = 3340 kJ
In scientific notation,
Q = 3.34 × 10³ kJ
So the thermal energy needed to be released by the calcium chloride is 3.34 × 10³ kJ
Comparing Q = 3.34 × 10³ kJ with a.bc × [tex]10^{d}[/tex] kJ
So, a = 3, b = 3, c = 4 and d = 3
The values of a, b, c and d are
a = 3, b = 3, c = 4 and d = 3
A sports car moving at constant velocity travels 120m in 5.0s. If it then brakes and comes to a stop in 4.0s,what is the magnitude of it's acceleration?
Answers
✔ First calculating the speed :
V = d(in m)/t(in s)
V = 120/5 V = 24 m/s✔ You now know the average car's speed, is time it takes to stop it completely, so you can calculate its acceleration :
a = V/t
a = -24/4 a = 6 m/s² The car has an acceleration of 6 m/s².What rule should be used to transform a table of data to represent the
reflection of f(x) over the yaxis?
Answers
Answer:
Multiply the x values with -1.
Explanation:
By multiplying the numbers by one, you are changing them to be the opposite of their original state.
You multiply the numbers that are in the x-value column because you are reflecting the image over the y-axis.
Hope this helped and good luck!
Answer:
Multiply each x-value in the table by -1
Explanation:
What happens when white light shines through a translucent, red, glass window? a) All colors of light except red are transmitted through the glass. b) Red light is transmitted through and reflected by the glass c) Red light is absorbed by the glass d) all colors except red are reflected by the glass
Answers
Answer:
b. Red light is transmitted through and reflected by the glass
Explanation:
Give me brainliest plz!
All of the wavelengths of the red light are absorbed when it passes through a translucent red glass window, but the red light is transmitted and reflected.
What happens when white light shines through red glass?Red light emerges from the other side of a white light source that has been passed through a red filter. This is so that only red light can pass through the red filter. The spectrum's other colors (wavelengths) are absorbed. Similar to this, a green filter only lets through green light.White light is colorless light that contains all the wavelengths of the visible spectrum. Only specific wavelengths of white light are filtered through transparent or translucent things.Through a colorful glass, white light shines through. Except for the color it is shining through, all light wavelengths are absorbed by the glass.Therefore, if the red light passes through a translucent, red, glass, window, all the wavelengths are absorbed but the red light is transmitted and reflected.
Therefore, the correct answer is option b) Red light is transmitted through and reflected by the glass.
To learn more about light refer to:
https://brainly.com/question/12002703
#SPJ2
1. Analogies exist between rotational and translational physical quantities. Identify the rotational term analogous to each of the following: acceleration, force, mass, work, translational kinetic energy, linear momentum, impulse.
2. Explain why centripetal acceleration changes the direction of velocity in circular motion but not its magnitude.
Answers
Answer:
1) a α, m I, W=F.d W =τ . θ,
2) a = v²/r
Explanation:
1) The amounts of rotational and translational motion are related
acceleration is
a = d²x / dt²
linear displacement is equivalent to angular rotation, therefore angular acceleration is
α = d²θ / dt²
force in linear motion is equivalent to moment in endowment motion
F = m a
τ = I α
the mass is the inertia of the translation, in rotational motion the moment of inertia is the rotational inertia
I = m r²
Work is defined by W = F. d
in rotation it is defined by W = τ . θ
The linear momentum is p = mv
the angular momentum L = I w
momentum the linear motion is I = F dt
in the rotation it is I = τ dt
2) The velocity is a vector therefore it has modulus and direction, linear acceleration changes the modulus of velocity, whereas circular motion changes the direction (the other element of the vector).
[tex]a_{c}[/tex]Ac = v²/r
Three books are at rest, in equilibrium, on a horizontal table as
shown. The weight of each book, which is equal to the force
gravity exerts in the downward direction, is given. What is the
net force on the middle book?
Answers
Answer:
Net force = 0
Explanation:
Short answer: if the middle book is not acceleration in any direction, the net force is zero.
Long answer: refer to the attached free-body diagram (FBD) to see why the net force is zero. Skills to draw FBD are essential in solving problems in statics.
Top book exerts -mg (downwards) on the middle book.
Middle book exerts -mg (downwards) on the bottom book.
Total downward force is -mg-mg = -2mg
By Newton's third law, when an object is not in motion, reaction equals action of -2mg in the opposite direction, therefore the reaction (upwards) is +2mg.
This makes the net force of -2mg (downwards) + 2mg (upwards) =0
On a horizontal table, three books are resting and balanced. The net force on the middle book will be equal to zero.
What is equilibrium?Equilibrium is the condition of an object when two or more opposing forces, whether internal, external or a combination of both, act on the body and cancel one another out to maintain the object in the same state as it was. The Latin term for weight or balance, libra, serves as the origin of the word equilibrium.
According to the question :
The net force is 0 if the middle book does not accelerate in any direction.
The Middle book is impacted negatively (downwards) by the top book.
The middle book pulls down on the lower book by -mg.
The total downward force is -2mg = (-mg-mg)
According to Newton's third rule, a reaction when an item is not moving equals an action of -2mg in the opposite direction, hence the reaction (upwards) is a response of +2mg.
Consequently, the net force of -2mg (downwards) + 2mg (upwards) = 0 is created.
To get more information about Equilibrium :
https://brainly.com/question/28527601
#SPJ2
a skydiver jumped out of a plane and fell 9 miles to the ground. his average speed while falling was 174 miles/hour. how much time did the dive last?
Answers
Answer:
t = 0.051 seconds
Explanation:
Given that,
A skydiver jumped out of a plane and fell 9 miles to the ground. It means 9 miles is the distance covered.
The average speed of the skydiver is 174 miles/hour
We need to find the time for which he dive last. It means t is the time taken. Total distance covered divided by time taken is called average speed. So,
[tex]v=\dfrac{d}{t}\\\\t=\dfrac{d}{v}\\\\t=\dfrac{9}{174}\\\\t=0.051\ s[/tex]
So, a skydiver dive for 0.051 seconds.
Calculating heat gained, need help!!!
Q=(m)(c)(triangle T)
trial 1:
Q=(0.4)(4.186 J/kg)(78)=?
trial 2:
Q=(0.6)(4.186 J/kg)(78)=?
trial 3:
Q=(0.45)(4.186 J/kg)(75)=?
Answers
Explanation:
q = mCΔT
where m is mass,
C is specific heat capacity,
and ΔT is change in temperature.
Make sure all your units match. Assuming the substance is water, C = 4186 J/kg/°C.
Trial 1:
q = (0.4 kg) (4186 J/kg/°C) (78°C)
q = 130,600 J
Trial 2:
q = (0.6 kg) (4186 J/kg/°C) (78°C)
q = 195,900 J
Trial 3:
q = (0.45 kg) (4186 J/kg/°C) (75°C)
q = 141,300 J
Which of the following statements describes nucleons?
A. Nucleons are the particles that make up a nucleus.
B. Nucleons are the particles in an atom that are neutral.
C. Nucleons are the particles that make up an atom.
D. Nucleons are the particles in an atom that have a charge.
Answers
Answer: nucleons are the particles that make up in nucleus
Explanation:
Nucleons are the particles that make up a nucleus, and they include protons and neutrons.
What are nucleons?Nucleons are particles that make up nucleus of an atom. They include either proton or neutron, or both found in atomic nucleus.
Generally, nucleons are subatomic particles found within nucleus of an atom.
Therefore, we can conclude that, nucleons are the particles that make up a nucleus.
Learn more about nucleons here: https://brainly.com/question/12582292
#SPJ2
Two men, Joel and Jerry, each pushes an object that are identical on a horizontal frictionless floor starting from rest. Joel and Jerry are using the same force F. Jerry stops after 10 min, while Joel is able to push for 5.0 min longer. Compare the work they do.
Answers
Answer:
The work done by Joel is greater than the work done by Jerry.
Explanation:
Let suppose that forces are parallel or antiparallel to the direction of motion. Given that Joel and Jerry exert constant forces on the object, the definition of work can be simplified as:
[tex]W = F\cdot \Delta s[/tex]
Where:
[tex]W[/tex] - Work, measured in joules.
[tex]F[/tex] - Force exerted on the object, measured in newtons.
[tex]\Delta s[/tex] - Travelled distance by the object, measured in meters.
During the first 10 minutes, the net work exerted on the object is zero. That is:
[tex]W_{net} = W_{Joel} - W_{Jerry}[/tex]
[tex]W_{net} = F\cdot \Delta s - F\cdot \Delta s[/tex]
[tex]W_{net} = (F-F)\cdot \Delta s[/tex]
[tex]W_{net} = 0\cdot \Delta s[/tex]
[tex]W_{net} = 0\,J[/tex]
In exchange, the net work in the next 5 minutes is the work done by Joel on the object:
[tex]W_{net} = W_{Joel}[/tex]
[tex]W_{net} = F\cdot \Delta s[/tex]
Hence, the work done by Joel is greater than the work done by Jerry.
Which statement describes one feature of a closed circuit? Charges do not flow. Bulbs will not shine. The circuit is broken. The circuit is complete.
Answers
I inferred you've referring to a close electrical circuit.
Answer:
The circuit is complete.
Explanation:
A closed electrical circuit is indeed a complete circuit. Also, it allows charges to flow, the bulbs in the circuit will shine and it is not broken.
It is termed closed circuit because there is no brokage in the series of electrical wires or the switch; which may prevent the free flow of current or charges. Thus, a feature that marks closed circuits is that they are complete.
Answer:
The circuit is complete.
Explanation:
How does increasing frequency affect the crests of a wave?
They get higher.
They get closer together.
They get lower.
They get farther apart.
Answers
Answer:
they get closer together
Explanation:
We have seen that starlight passing through the interstellar medium is dimmed and reddened. Look at the photo of a sunset on Earth. The Sun’s light also appears reddish at sunset. Given your understanding of the reddening of starlight, why do you think sunsets appear red?
Answers
Answer:
Explanation:
Reddening of sun's rays at sunset and sunrise is due to scattering of light . The white light consisting of seven colours coming from the sun are scattered in different directions when they fall on the air particles present in atmosphere . Red coloured light scatters least and it travels straight forward to the viewer on the earth . On the other hand other colours scatter most and therefore they go out of area of vision for the viewer on the earth . Since only red colour reaches the eye of the viewer , sun's ray appear red . This happens during sunrise and sunset . It is so because during this period , sun rays travel far greater distance through atmosphere , so scattering is most pronounced .
Please help me with this question ASAP.
In a a potentiometer circuit, a 1m long potentiometer wire PQ of resistance 10 ohms is connected in series with a cells of e.m.f. 9V with internal resistance 3 ohms Calculate:
i The p.d. across PQ
ii. The e.m.f. of a cell which has a balance point of 75cm.
Answers
Answer:
i. 6.923 V
ii. The e.m.f. = 22.5 V
Explanation:
i. The given parameters are;
Length of potentiometer = 1 m
The resistance of the potentiometer = 10 Ω
The e. m. f. of the attached cell = 9 V
The current, I flowing in the circuit = e. m. f/(Total resistance)
The current, I flowing in the circuit = 9 V/(10 + 3) = 9/13 A
The potential difference, p.d. across the 1 m potentiometer wire = I × Resistance of the potentiometer wire
The p.d. across the potentiometer wire = 9/13×10 = 90/13 = 6.923 V
ii) Given that the 1 m potentiometer wire has a resistance of 10 Ω, 75 cm which is 0.75 m will have an e.m.f. given by the following relation;
[tex]\dfrac{E}{R_{balance}} = \dfrac{V}{R_{cell}}[/tex]
Where:
E = e.m.f. of the balance point cell
[tex]R_{balance}[/tex] = Resistance of 75 cm of potentiometer wire = 0.75×10 = 7.5 Ω
[tex]R_{cell}[/tex] = Resistance of the cell in the circuit = 3 Ω
V = e.m.f. attached cell = 9 V
[tex]\dfrac{E}{7.5} = \dfrac{9}{3}[/tex]
E = 7.5*3 = 22.5 V
The e.m.f. = 22.5 V