Answers
Related Questions
PLS HELP ASAP. *IF* THE ANSWER IS CORRECT I'LL MARK YOU AS BRAINIEST:
Which is an example of mechanical weathering?
a) iron oxide
b) water moving over rocks
c) limestone cave formations
d) hydrated minerals
Answers
Answer: C: limestone cave formations
For the reaction
C2H4(g) + 302(g) → 2002 (g) + 2H20 (8)
if 6.0 mol of CO2 are produced, how many moles of Oz were reacted?
4.0 mol
0 7.5 mol
9.0 mol
o none of these
O 15 mol
Answers
Answer:
9.0 mol
Explanation:
C₂H₄(g) + 3O₂(g) → 2CO₂ (g) + 2H₂O (g)In order to convert from moles of CO₂ to moles of O₂, we need to use the stoichiometric coefficients in the balanced reaction. We use a conversion factor that has moles of CO₂ in the denominator and moles of O₂ in the numerator:
6.0 mol CO₂ * [tex]\frac{3molO_2}{2molCO_2}[/tex] = 9.0 mol O₂molecular formula citric acid2.A 10.0 mL sample of pineapple juice was titrated with 0.100 M sodium hydroxide solution. The average volume of NaOH required to reach the endpoint was 12.8 mL. a.Calculate the number of moles of sodium hydroxide required to reach the endpoint. Show your work in equation editor. Remember to use units and report your answer to the proper number of significant figures.
Answers
Answer: The number of moles of sodium hydroxide required to reach the endpoint is 0.00128
Explanation:
To calculate the number of moles for given molarity, we use the equation:
[tex]\text{Molarity of the solution}=\frac{\text{Moles of solute}\times 1000}{\text{Volume of solution in ml}}[/tex]
Molarity of [tex]NaOH[/tex] solution = 0.100 M
Volume of [tex]NaOH[/tex] solution = 12.8 mL
Putting values in equation, we get:
[tex]0.100M=\frac{\text{Moles of}NaOH\times 1000}{12.8ml}\\\\\text{Moles of }NaOH=\frac{0.100mol/L\times 12.8}{1000}=0.00128mol[/tex]
Thus the number of moles of sodium hydroxide required to reach the endpoint is 0.00128
PLS ANSWER I WILL MARK U BRAINLIEST AND GIVE U THANK U
A student learns that salts like potassium chloride and sodium chloride are introduced in a weekly conducting solution. What option explains the chemical reactions that salts undergo and affect the conductivity of the solution?
a.Salts react chemically with the water particles and decrease the conductivity of the solution
b. Salts help to make the solution non-conducting by reacting with the particles of the solution
c. Salts mix with the particles of the weak conducting solution and helps to produce oxygen from the solution
d. Salts undergoes a chemical reaction with the particles of the solution and increase its conductivity
Answers
Answer:
d. Salts undergoes a chemical reaction with the particles of the solution and increase its conductivity
Explanation:
Salt compounds like potassium chloride (KCl) and sodium chloride (NaCl) mentioned in this question have the ability to disintegrate into their respective ions or charged atoms when dissolved in water. For example;
NaCl (aq) → Na+ + Cl-
However, these ions (Na+ and Cl-) are responsible for the ELECTRICAL CONDUCTIVITY of a solution. Hence, a salt compound when placed in an aqueous solution will form ions, which will conduct electricity. Hence, salinity of a solution increases its conductivity.
According to this question, salts undergoes a chemical reaction to with the particles of the solution to form ions that increase its conductivity.
The diagram below represents H2 and Cl2 molecules that will potentially react to form HCI.
Hydrogen
Chlorine
Which of the following best describes this reaction?
А
The limiting reactant is chlorine.
B
The percent yield will be greater than 100%.
с
Hydrogen and chlorine are nonreactive.
D
All molecules shown will react to form the product.
Answers
The limiting reactant is chlorine in the given reaction of hydrogen and chlorine. Therefore, the correct option is option A.
What is chemical reaction?A chemical reaction is a procedure that causes one group of chemical components to change chemically into another. Chemical atom bonds are formed and broken during chemical reactions, which traditionally only involve changes in the locations of electrons.
The study of chemical processes involving unstable and radioactive materials, where both electronic or nuclear changes may take place, is known as nuclear chemistry. The limiting reactant is chlorine in the given reaction of hydrogen and chlorine.
Therefore, the correct option is option A.
To know more about chemical reaction, here:
https://brainly.com/question/29039149
#SPJ5
Write a balanced chemical equation, complete ionic equation and a net ionic equation for Copper lll sulfate and zinc.
Answers
Answer: CuSO4 (aq)+ Zn (s) → Cu (s) + ZnSO4(aq)
Explanation: do you mean copper II sulphate CuSO4?
Select the statements that are true regarding open tubular and packed columns in gas chromatography.
A. For similar analysis times, open tubular columns provide better resolution than packed columns.
B. Packed columns offer increased sensitivity to small sample sizes.
C. Packed columns have a greater sample capacity than open tubular columns.
D. Open tubular columns give better resolution but longer analysis separation times compared to packed columns.
E. Packed columns give broader peaks with longer retention times.
Answers
Answer:
true or false :-
a) yes
b) no
c)yes
d)yes
e)no
For similar analysis times, open tubular columns provide better resolution than packed columns, Packed columns have a greater sample capacity than open tubular columns and Open tubular columns give better resolution but longer analysis separation times compared to packed columns are true regarding open tubular. Hence, options A, C and D are correct.
What is gas chromatography used for?The chemical constituents of a sample mixture are identified, separated, and quantified using an analytical technique called gas chromatography.
Gas chromatography is a technique for separating compounds in mixtures by injecting a gaseous or liquid sample into a mobile phase, which is usually referred to as the carrier gas, and passing the gas through a stationary phase. The mobile phase is often composed of an inert gas or an unreactive gas, such as helium, argon, nitrogen, or hydrogen.
Thus, options A, C and D are correct.
For more information about gas chromatograph, click here:
https://brainly.com/question/13565117
#SPJ2
i need help can someone help. pls
Answers
Not sure if my answers are even correct. i am so confused
Answers
Answer:
#3 is the percentage for sodium i believe and 4 is right
Explanation:
2. Which of the following are reactants of photosynthesis? *
a. carbon dioxide, water and light energy
b. glucose and oxygen
c. carbon dioxide, water and ATP
d. carbon dioxide, glucose and light energy
Answers
Answer:
A is the answer.
What is the molar mass of (NH4)2 CO3
Answers
For parts a & b below, derive only the initial value problem set up.
A tank of capacity 200 gallons holds 100 gallons of water with 25 pounds of sugar in solution. Pure water is poured into it at the rate of 2 gallons per minute, and the well-stirred mixture flows out of this tank at a rate of gallon per minute and into the second tank that initially contained 50 gallons of fresh water. The well-stirred mixture in the second tank is allowed to leave the tank at the same rate (1 gal/min).
1. Determine an Initial value problem that satisfied by the amount of sugar in the first tank (Tank A).
2. Determine an Initial value problem that satisfied by the amount of sugar in the second tank (Tank B).
Answers
Answer:
Explanation:
From the given information:
Let y(t) be the amount of sugar in tank A at any time.
Then, the rate of change of sugar in the tank is given by:
[tex]\dfrac{dy}{dt}= (rate \ in ) - ( rate \ out )[/tex]
The rate of the sugar coming into the tank is 0
[tex]\text{rate of sugar going out }= \dfrac{y(t) \ pound}{100}\times \dfrac{1 }{min} \\ \\ = \dfrac{y}{100} \ pound/min[/tex]
[tex]So; \\ \\ \\ \dfrac{dy}{dt} = 0 - \dfrac{y}{100} \\ \\ \implies \dfrac{dy}{y }= -\dfrac{dt}{100 } \\ \\ \implies dx|y| = -\dfrac{t}{100}+C \\ \\ \implies e*{In|y|}= e^{-\dfrac{t}{100}+C} \\ \\ \implies y = Ce^{-\dfrac{t}{100}}[/tex]
Initial amount of sugar = 25 Pounds
Now; y(0) = 25
25 = Ce⁰
C = 25
So; y(t) = 25 [tex]e^{-\dfrac{t}{100}[/tex]
Thus, the amount of sugar at any time t = [tex]\mathbf{25 e^{^{-\dfrac{t}{100}}}}[/tex]
B) For tank B :
[tex]\dfrac{dy}{dt}= 1 - \dfrac{y}{50 } \\ \\ \dfrac{dy}{dt}= \dfrac{50-y}{50} \\ \\ \dfrac{dy}{50-y }= \dfrac{dt}{50}[/tex]
Most ecosystems originally get their energy from
Answers
CS2(g) + 3 O2(g) → CO2(g) + 2 SO2(9)
16. CS2 reacts with O, to produce CO2 gas and SO, gas as shown above. Identify the limiting reactant
when 192 g O, is added to 4.50 mol CS2
A CS2
B. O2
C.CO2
D. SO
Answers
Pretty easy question if you know science. 20 Points
A piece of nickel at 25 °C is dropped into a glass of water at 25 °C. Which statement is correct?
Heat will flow from the nickel to the water in the glass.
Heat will flow from the water in the glass to the nickel.
There will be no transfer of heat from the nickel to the water in the glass.
The final temperature of water and nickel will be 0 °C.
Answers
Answer:
C.
Explanation:
because the heat From the nickel and the heat from the water are the same.
As a piece of nickel at 25 °C is dropped into a glass of water at 25 °C, there will be no transfer of heat from the nickel to the water in the glass.
To answer the question, we need to know what heat transfer is.
What is heat transfer?This is the flow of heat energy from one body to another over a temperature gradient.
Heat transfer between Nickel at 25 °C and water at 25 °C.
Since a piece of nickel at 25 °C is dropped into a glass of water at 25 °C, there is no temperature gradient, since, both bodies are at the same temperature. Thus, no heat is transferred from the nickel to the water.
So, as a piece of nickel at 25 °C is dropped into a glass of water at 25 °C, there will be no transfer of heat from the nickel to the water in the glass.
Learn more about heat transfer here:
https://brainly.com/question/20493362
The physical properties of element X are shown in the table below.
Physical Properties of X
malleable
ductile
shiny
conducts heat
conducts electricity
Which most likely represents the identity of element X?
O A. iodine (1)
OB. sulfur (S)
OC. copper (Cu)
OD. carbon (C)
Answers
Answer:
Copper
because it is metal and all the above property
matches with copper properties
so answer of this question is copper
PLZ HELP ILL GIVE BRAINLIEST PLS 20 POINTS!!!.
Energy generated from wind has both advantages and disadvantages. What is true about wind energy?
No greenhouse gases are given off by wind power, but payback for construction takes many years.
Some erosion occurs around the towers of wind turbines, but electrical fires are highly unlikely.
There is enough wind power in the U.S. to drive the entire country, but aesthetic considerations cause some people to oppose its use.
Modern turbines are safe for birds and bats that fly in the area but can reduce the number of crops grown on farmland.
Answers
Explanation:
I wanna go with the 3rd option
Answer:
Its "There is enough wind power in the U.S. to drive the entire country, but aesthetic considerations cause some people to oppose its use."
Explanation:
Yw! :D took the test
Which is an advantage of selling plant fertilizer as a powder rather than as a liquid?
Choose one.
A. The powder must be stored in a childproof container.
B.Transportation costs are reduced.
C.The powder may be a health hazard if proper procedures are not followed during mixing.
D.The gardener has to be able to read directions carefully and mix the proper amount of solvent and solute.
Answers
Answer:A
Explanation: because i saw the sheet
HELP NEED THIS BADLLLLY !!!!!!!!!
Answers
Answer:
2 is correct
Explanation:
My friend for you this answer
D: ____________________________________________
E: ____________________________________________
Answers
Answer:
I think the awnser would be c urf mom
Explanation:
What happens to an elements property when he doesnt pay his taxes?
Answers
Answer:
I've got a feeling...
Explanation:
What?
One essential step in the manufacture of many plant fertilizers is the production of nitrogen monoxide gas, NO(g). This step is represented by the following balanced equation: 4 NH3(g) + 5 O2(g) --> 4 NO(g) + 6 H2O(l)
Determine the amount of oxygen needed to produce 1.2 x 104 mol of nitrogen monoxide gas.
Answers
Answer: 1.5 moles, or 48 grams
Explanation:
Set up the following:
[tex]\frac{1.2 x 10^4 mol NO}{1}[/tex] × [tex]\frac{5 mol O2}{4 mol NO}[/tex] = 1.5 moles of O2 needed
If you're also looking for the number of grams needed:
[tex]\frac{1.5 mol}{1}[/tex] × [tex]\frac{32 g}{1 mol}[/tex] = 48 grams needed
Organelles carry out specif functions within the cell. True False
Answers
Answer:
true
Explanation:
how many grams of oxygen gas are there in a 2.3 L tank at 7.5 atm and 24 C
Answers
Answer:
22.6 g
Explanation:
First we use the PV=nRT equation:
P = 7.5 atmV = 2.3 Ln = ?R = 0.082 atm·L·mol⁻¹·K⁻¹T = 24 °C ⇒ 24 + 273.16 = 297.16 KWe input the data:
7.5 atm * 2.3 L = n * 0.082 atm·L·mol⁻¹·K⁻¹ * 297.16 KAnd solve for n:
n = 0.708 molThen we convert 0.708 moles of oxygen gas (O₂) to grams, using its molar mass:
0.708 mol * 32 g/mol = 22.6 g4 points
1. What is the main source of energy for this food chain? *
Sun
Plants
Fish
Turtles
Sharks
O fish
O turtle
sun
O shark
Answers
Answer:
sun
Explanation:
all of the other things get their energy from the Sun
Answer:
sun
Explanation:
the sun is the main source of energy for plants, which are at the bottom of the food chain.
High Melting points
Ionic or covalent
Answers
ionic
hope this help you
have a good day
if you can please give me Brainliest thanks
PLEASE HELP
Solids that do not form a crystalline structure are called.......
I don't remember what they are called
Answers
In amorphous solids the particles do not have a repeating lattice pattern. They are also called "pseudo solids." Examples of amorphous solids include glass, rubber, gels and most plastics. Hope this helps
In terms of activation energy, why does increasing the temperature of a
reaction make it proceed more quickly?
A. Increasing the temperature reduces the activation energy.
B. Increasing the temperature increases the potential energy of the
reactants.
O C. Increasing the temperature increases how many reactant
molecules reach activation energy.
D. Increasing the temperature makes the molecules move slower.
Answers
Increasing the temperature increases the potential energy of the reactants, thus making the reaction faster.
What is activation energy?Activation energy is the minimum energy that reactant molecules must possess in order to collide together to form products.
Increasing the temperature of a reaction helped to make the reaction proceed faster. This is because more reactant particles acquire the energy greater than or equal to the activation energy.
Therefore, increasing the temperature of a reaction makes it proceed more quickly.
Learn more about activation energy at: https://brainly.com/question/26724488
#SPJ2
directs all of the cell's activities.
a Endoplasmic Reticulum
b cell membrane
c Nucleus
d cytoplasma
Answers
Is grilling a ham and cheese sandwich and chemical or physical change?
Answers
Answer:
Physical
Explanation:
I say physical because if you just think about the cheese it wasnt melted before u put that heat on it .