PLS HELP ME PLEASE!!! how would I graph this. A freight company charges $25 plus $4.50 per pound to ship an item that weighs n pounds. The total shipping charges are given by the equation C = 4.5n+ 25. Identify the slope and y-intercept, and use them to graph the equation for n between 0 and 50 pounds.​

The assumption of the independent samples t-test that the populations from which the samples are drawn have equal variability is known as the homogeneity of variances or homoscedasticity.

The assumption of homogeneity of variances, also known as homoscedasticity, in the independent samples t-test states that the populations from which the samples are drawn have equal variability or spread. In other words, the standard deviations of the two populations being compared should be roughly the same.

This assumption is important because it affects the accuracy of the t-test in determining whether there is a significant difference between the means of the two groups. Violation of this assumption can lead to inaccurate results and affect the validity of the t-test. If the assumption is not met, alternative tests, such as Welch's t-test or non-parametric tests, may be more appropriate.

Learn more about homogeneity of variances: https://brainly.com/question/31567396

#SPJ11

The correct representations of the inequality expression are (a) 6x – 15 > -10 + 5x and (c) 3(2x – 5) > -5(2 – x)

Here, we have,

to determine the correct representations

From the question, we have the following expression that can be used in our computation:

–3(2x – 5) < 5(2 – x)

Divide bot sides of the inequality by -1

So, we have the following representation

3(2x – 5) > -5(2 – x)

Next, we open the brackets

This gives

6x – 15 > -10 + 5x

Hence, the representation is 6x – 15 > -10 + 5x

Read more about inequality at

brainly.com/question/25275758

#SPJ1

Complete question

Which are correct representations of the inequality –3(2x – 5) < 5(2 – x)? Select two options.

(a) 6x – 15 > -10 + 5x

(b) 6x – 15 < -10 + 5x

(c) 3(2x – 5) > -5(2 – x)

(d) 3(2x – 5) < -5(2 – x)

The true population means the weight of the residents in the town is between 147.6 and 160.4 pounds.

Use the formula for the confidence interval:

[tex]CI = \bar X \pm z*(\sigma/\sqrt{n})[/tex]

where:

X= sample mean = 154 pounds

σ = population standard deviation = 39 pounds

n = sample size = 149

z = z-score corresponding to the confidence level of 95%, which is 1.96 (from a standard normal distribution table)

Substituting the values, we get:

[tex]CI = 154 \pm 1.96*(39/\sqrt{149})\\CI = 154 \pm 6.4[/tex]

Rounding to the nearest tenth, we get:

CI = (147.6, 160.4)

Therefore, we can say with 95% confidence that the true population means the weight of the residents in the town is between 147.6 and 160.4 pounds.

Learn more about Mean here:

https://brainly.com/question/521501

#SPJ1

If a cone is sliced by a vertical plane that passes through the vertex, the resulting cross section will be a triangle.

The vertical plane cuts through the cone at its highest point, which is also the point where the two sides of the cone meet (i.e. the vertex). As the plane cuts through the cone, it intersects with the sloping sides of the cone at different angles, creating a triangular shape.

The resulting cross section will have the same base as the original cone, which is a circle. However, the height of the cross section will be shorter than the height of the original cone, since the vertical plane has removed a portion of the cone.

Overall, the resulting cross section will be a triangle with a circular base, which is often referred to as a frustum. This shape is commonly used in architecture and engineering, as it allows for tapered structures such as pillars and columns to be created.

Learn more about cross section here: https://brainly.com/question/16881438

#SPJ11

The probability of randomly selected customers ordering both an appetizer and dessert is 57%.

We have,

The probability is defined as the possibility of an event being equal to the ratio of the number of favorable outcomes and the total number of outcomes.

Given data as:

P(E₁) = 52%

P(E₂) = 32%

P(E₁ or E₂) = 27%.

Using the formula:

⇒ P(E₁ or E₂) = P(E₁) + P(E₂) - P(E₁ & E₂)

Substitute the values and solve for P(E₁ & E₂)

⇒ P(E₁ & E₂) = 52% + 32% - 27%

⇒ P(E₁ & E₂) = 57%

Therefore, the probability of randomly selected customers ordering both an appetizer and dessert is 57%.

Learn more about the probability here:

brainly.com/question/11234923

#SPJ1

Answer:

You are going to spend $3.48 in total.

Step-by-step explanation:

You need to add the two numbers together.

1.49+1.99=$3.48

You are going to spend $3.48 in total. (I'm assuming we aren't supposed to include tax)

There are two main subtypes of quantitative data, which are discrete data and continuous data. Each subtype has different techniques for analysis.

1. Discrete data: This type of data represents whole numbers or counts that can only take specific values. Examples include the number of students in a class or the number of cars in a parking lot. Techniques used to analyze discrete data include:
  a. Frequency distribution: A summary of the number of times each value appears in the dataset.

 b. Measures of central tendency: Calculating the mean, median, and mode of the dataset to understand its central point.

 c. Measures of dispersion: Assessing the range, variance, and standard deviation to understand the spread of the data.

2. Continuous data: This type of data represents measurements that can take any value within a range, such as height, weight, or temperature. Techniques used to analyze continuous data include:

 a. Histogram: A graphical representation of the distribution of the data, using bars to represent the frequency of values within specific intervals.

  b. Probability density function: A mathematical function that describes the probability of a continuous random variable falling within a specific range.

  c. Regression analysis: A statistical method for analyzing the relationship between a dependent variable and one or more independent variables.

Both discrete and continuous data can also be analyzed using inferential statistics, such as hypothesis testing and confidence intervals, to make inferences about a population based on a sample of the data.

More on quantitative data: https://brainly.com/question/8054076

#SPJ11

The total volume of figure which has cube and pyramid is 33 cubic units.

The volume of a square pyramid is given by the formula V = (1/3)Bh, where B is the area of the base and h is the height of the pyramid.

Let's call the side length of the square base of the pyramid s.

(1/2)s² + h² = 5²

s² + 4h² = 25

Since the sides of the cube are 3, the side length of the square base of the pyramid is also 3.

9 + 4h²  = 25

h = 2

So the height of the pyramid is 2.

Volume of pyramid = (1/3)(3^2)(2) = 6

The volume of a cube is given by the formula V = s³, where s is the length of a side.

Since the sides of the cube are 3, the volume of the cube is:

Volume of the cube = 3³ = 27

Therefore, the total volume of the pyramid and the cube is:

Total = 6 + 27

= 33

Hence, the total volume of figure which has cube and pyramid is 33 cubic units.

To learn more on Three dimensional figure click:

https://brainly.com/question/2400003

#SPJ1

Answer: 2/3

Step-by-step explanation:

    We will turn all of these fractions into decimals by dividing to compare them easier.

3/5 ➜ 0.6

20/100 ➜ 0.2

6/10 ➜ 0.6

1/2 ➜ 0.5

2/12 ➜ 0.16666

2/3 ➜ 0.6666

    0.6666 > 0.6, so 2/3 > 3/5

    This means our answer is 2/3

Using central limit theorem, the shape of the sample proportions is normal

The shape of the sample distribution can be found using central limit theorem (CLT) which states that that "if you take sufficiently large samples from a population, the samples’ means will be normally distributed, even if the population isn’t normally distributed."

In this problem, our sample size is 10 and the population proportion is 52% which is roughly 0.5 and still reasonable, we can use CLT to approximate the shape of the sample proportion.

mean = 0.52

standard error = √(p(1 - p(hat) / n) = √(0.53 * 0.48) / 10 = 0.15

The shape of the sample with normal distribution having a mean of 0.52 and SE of 0.15 is normal

Learn more on normal distribution here;

https://brainly.com/question/4079902

#SPJ1

A tremendously large sample might seem advantageous when trying to estimate a population parameter, but it doesn't necessarily guarantee the quality of an estimator. Some potential problems with very large samples include:

1. Increased cost and time: Collecting a large sample can be more expensive and time-consuming than gathering a smaller one, especially if data collection requires extensive resources.

2. Diminishing returns: As sample size increases, the added benefit of each additional data point may decrease. At some point, further increases in sample size might not yield meaningful improvements in the precision of an estimator.

3. Non-representative samples: A large sample may not always be representative of the population, especially if it's subject to selection bias, non-response bias, or other sources of error. If the sample is not representative, the estimator's accuracy may be compromised.

4. Outliers and influential observations: In a very large sample, there is a higher chance of encountering outliers or influential observations that can distort the estimator's results. These atypical data points can potentially lead to misleading conclusions.

5. Analytical challenges: Large samples may present computational and analytical challenges, especially when dealing with complex models or large datasets. This can make it difficult to obtain reliable results in a timely manner.

In summary, while large samples can offer benefits in terms of increased precision and reduced sampling error, they also come with potential challenges. Ensuring sample representativeness, managing outliers, and addressing other quality-related issues are essential when working with large samples to obtain accurate estimators.

Learn more about tremendously here:

https://brainly.com/question/29024065

#SPJ11

The shortest height at which the two stacks will be the same is 80 inches. There will be 5 boxes of 16 inches each and 4 boxes of 20 inches required.

Here, we have,

We have boxes that are 16 inches tall, are being stacked next to boxes that are 20 in inches tall.

We have to determine -

What is the shortest height at which the two stacks will be the same.

How many boxes will be in each stack.

You have 10 boxes of 2 inch each and a space of 16 inches to store them. Investigate whether or not the boxes will fit in this much space.

The total space needed for 10 such boxes will be = 2 x 10 = 20 inches. Hence, 16 inches of space is not enough to store them.

According to the question, we have -

Height of Box 1 = 16 inches.

Height of Box 2 = 20 inches.

Assume that it would take x Boxes of 16 inches and y boxes of 20 inches to reach the same height 'h'. Since, the height of both stacks is same, therefore -

16x = 20y

16x - 20y = 0

4x - 5y = 0

Plot this line on the graph [Refer to image attached].

Now, the boxes can only be used as a complete one box. This means that you cannot use half, quarter box to reach the same stack height. The nearest solution to this is the coordinate point P(5, 4).

Now -

h = 16x = 16 x 5 = 80 inches.

Hence, the shortest height at which the two stacks will be the same is 80 inches. There will be 5 boxes of 16 inches each and 4 boxes of 20 inches required.

To solve more questions on Stack arrangements ,

brainly.com/question/17649351

#SPJ1

If A is an m×n matrix, then both ATA and AAT are defined.

If A is an m×n matrix, then both ATA and AAT are defined.

The matrix ATA is the product of the transpose of A and A itself. It is a square matrix of size n×n.

The matrix AAT is the product of A and the transpose of A. It is a square matrix of size m×m.

Both ATA and AAT are important and commonly used in linear algebra and statistics. The matrix ATA arises in the context of least squares regression, while AAT arises in the context of principal component analysis (PCA) and singular value decomposition (SVD).

Visit to know more about Matrix:-

brainly.com/question/2456804

#SPJ11

Answer:

p = 35

Step-by-step explanation:

To find the number of photos Harrison included of the rest of his classmates, we need to subtract the number of photos of his best friends from the total number of photos.

Therefore, the equation that can be used to find p, the number of photos he included of the rest of his classmates, is:

p = total number of photos - number of photos of best friends

In this case, the total number of photos is 42 and the number of photos of best friends is 7. So, the equation becomes:

p = 42 - 7

Simplifying, we get:

p = 35

Therefore, Harrison included 35 photos of the rest of his classmates in his photo album.

Answer:

The mode is 2.

Step-by-step explanation:

Two people voted for 0 pets and two people voted for four pets.

The number, 2 showed more than the rest of the numbers, if the number of people were to be on the bottom the graph would be impossible because of the two graphs with the number 1.

Answer:

Output is n - 4

Step-by-step explanation:

It follows a pattern.  Output = Input - 4

Okay to make this easy for the both of us i will attach the graphing part below and color code the question to it graph.

Step-by-step explanation:

Problem 15 is ( 0,0.5) =Graph color Red

Problem 16 is( 0,0.25) = Graph color Blue

Problem 17 is (0,3) = Graph color Green

Problem 18 is (0,4) = Graph color Purple

I just listed the points in which they past through so it would be easier to plot.

I hope I helped you a lot.

Well let me know when you get this and how you did so I will know if i did it correct.

Answer:

2

Step-by-step explanation:

i just took the test and that was the correct answer

Beth would have made 48 kg of dough if she worked for 6 hours.

First, let's find the amount of dough Beth prepares in one hour:

Dough prepared in 3 hours = 24 kg

Dough prepared in 1 hour = 24 kg ÷ 3 = 8 kg/hour

So, Beth can prepare 8 kilograms of dough in one hour.

Now, we can use this unit rate to find the amount of dough Beth prepares in 6 hours:

Dough prepared in 1 hour = 8 kg

Dough prepared in 6 hours = 8 kg/hour × 6 hours = 48 kg

Therefore, if Beth worked for 6 hours, she would have prepared 48 kilograms of dough.

To learn more about the rate click here :

https://brainly.com/question/12786410

#SPJ1

Answer:

Step-by-step explanation:

If you realize that you've made a mistake after the fact, the first thing to do is to acknowledge it.

This means accepting responsibility for your actions and recognizing that you could have done better. Once you've done this, you can take steps to correct the mistake and prevent it from happening again in the future.

If your mistake has affected other people, it's important to apologize. Be sincere and acknowledge the impact your actions have had on others. This can help to repair any damage done to relationships and show that you're taking responsibility for your actions.

Learn more about mistakes on

https://brainly.com/question/29626623

#SPJ1

True.

If the equation Ax=0 has a nontrivial solution, then the columns of A are linearly dependent.

If the equation Ax=0 has a nontrivial solution, then the columns of A are linearly dependent. This means that there exist constants c1, c2, ..., cn, not all zero, such that the vector

v = c1*a1 + c2*a2 + ... + cn*an

is the zero vector, where a1, a2, ..., an are the columns of A.

This implies that A has a non-pivot column, since we can write the vector v as a linear combination of the other columns. Therefore, A has fewer than n pivot columns, or equivalently, fewer than n pivot points.

Visit to know more about Linearly dependent:-
brainly.com/question/31389223
#SPJ11

Total number of cards is always 52 which has 4 jacks. In the given question we need to use the concept of probability.

The following steps are need to be followed:

1. First, let's identify some key information:
  - A standard deck has 52 cards, with 4 jacks (one of each suit).
  - You're drawing a card and then replacing it, which means each draw is independent and the probability remains constant.

2. Now, let's calculate the probability of drawing a jack on each draw:
  - P(Jack) = 4 jacks / 52 total cards = 1/13

3. Since you want to find the probability of drawing a jack 4 times in a row, we'll multiply the probability of drawing a jack on each draw:
  - P(All Jacks) = P(Jack) × P(Jack) × P(Jack) × P(Jack) = (1/13) × (1/13) × (1/13) × (1/13)

4. Simplify the probability:
  - P(All Jacks) = 1/28561

So the probability of drawing all 4 jacks when you pick 4 cards from a deck, replacing the card each time before picking the next card, is 1/28,561.

To learn more about probability : brainly.com/question/30034780

#SPJ11

Answer: 3 sq. m

Step-by-step explanation:

assuming you are solving for the large, solid triangle, you can subtract the whole minus the part

to solve for the whole, (3 + 1) [base] x 2 [height] / 2 = 4

to solve for the dotted part, 1 [base] x 2 [height] / 2 = 1

whole - part, or 4 - 1, equals 3

The mathematical statement is an inequality that can be written as:

26  > k

Here we have the following mathematical statement:

"26 is more than k"

This type of statement is what we know as an inequality, this is a comparation between two values.

Here, the statement says that the number 26 is a number larger than k, which is a variable.

This statement will be written as:

26 > k

Where the symbol ">" means that the thing in the left is larger than the thing in the right,

Learn more about inequalties at:

https://brainly.com/question/24372553

#SPJ1

The statement "Player 3 is more likely to hit the ball than Player 2 because P(Player 3) > P(Player 2)" is true we get by finding probabilities of each played and comparing them.

We need to convert the probabilities to decimals or fractions to compare them.

Player 1: 7/11 = 0.64

Player 2: 6/9 = 0.67

Player 3: 5/7 = 0.71

Comparing the probabilities, we see that Player 3 has the highest probability of hitting the ball, followed by Player 2, and then Player 1.

Therefore, the statement "Player 3 is more likely to hit the ball than Player 2 because P(Player 3) > P(Player 2)" is true.

To learn more on probability click:

https://brainly.com/question/11234923

#SPJ1

The Roth IRA is the best choice for the employee in this scenario because the employee will likely pay less in taxes during employment than in retirement

Given data ,

Contributions to a Roth IRA are made after-tax, which means that the employee contributes funds that have already paid taxes. Contributions grow tax-free, and qualifying retirement withdrawals—which include both contributions and earnings—are likewise tax-free.

In this instance, the employee intends to contribute $5,500 per year to an IRA for the next 37 years until retirement. The employee has already paid taxes on the contributions made while employed since they are made on an after-tax basis. As a result, both the contributions and the earnings that are withdrawn upon retirement will be tax-free.

Hence , the best IRA is Roth IRA

To learn more about Roth IRA click :

https://brainly.com/question/29526689

#SPJ7

Answer:

4/6 because the bag holds six tiles total so 4 of the 6 are numbered so you would have 4/6 of a chance of picking a numbered tile.

Step-by-step explanation:

4/6 because the bag holds six tiles total so 4 of the 6 are numbered so you would have 4/6 of a chance of picking a numbered tile.

Answer:

4/6

Step-by-step explanation:

4/6 because the bag holds six tiles total so 4 of the 6 are numbered so you would have 4/6 of a chance of picking a numbered tile.

The number of days that had a high temperature of at least 16°C would be = 25days.

From the dot plot given above, the different temperature ranges according to the different days.

Temperature 6° = 1 day

Temperature 7°= 2 days

Temperature. 8° = 2 days

Temperature 9° = 3 says

Temperature 10° = 5 days

Temperature. 11° = 3 days

Temperature. 12° = 4 days

Temperature. 13° = 1 days

Temperature. 14° = 2 days

Temperature. 16° = 2 days

Therefore, the total number of days = 1+2+2+3+5+3+4+1+2+2 = 25 days

Learn more about temperature here:

https://brainly.com/question/27944554

#SPJ1

The value of w in the equation (Wx24) - (2,400 divided by 80) =1,602 is 68

From the question, we have the following parameters that can be used in our computation:

(Wx24) - (2,400 divided by 80) =1,602

Evaluate the brackets

So, we have

(Wx24) - 30 =1,602

Next, we evaluate the like terms

(Wx24) =1,632

Divide by 24

W = 68

Hence, the value of W is 68

Read more about expression at

https://brainly.com/question/15775046

#SPJ1