Answer:
Electricity comes from power generation plants (some homes have solar cells which produce most of the electricity
Older plants use coal and gas as fuels for power generation (if you see a train go thru with 100 or so cars loaded with coal, that may be from Wyoming and going to a coal fired plant)
Wind farms are becoming more plentiful and produce some portion of the electricity generated
Solar cell farms are also used to produce a small portion of electricity
Heat pumps can use geothermal sources (heat from the ground)
Wave motion of water can also be used to produce electricity
How does the motion of the molecules change when you increase the temperature
Answer:
They speed up as temperature increases.
Explanation:
As temperatures increases within a molecule the particles will speed up.
A cat weighing 7 kg chases a mouse at a speed of 4 m/s. What is the kinetic energy of the cat?
How do media literacy , information literacy and technology literacy and media and information literacy differ in terms of use?
Answer:
Media literacy creates a conscious awareness, the ability to understand, analyze, the messages various media like the newspapers, the radio, that is for the consumer, and it also promotes how best media create information for production.
While information literacy and technology literacy differs from other literacy asked in the question above, as information literacy and technology could be used when describing getting information through adequate research and further dishing out this available information so as to effectively use the information with the aim to solve problems, create awareness, or educate, through technologies such as for example, email.
Lastly, media and information literacy differ in terms of use from the other two explained above, as media and information literacy describes discerning information credibility, accuracy, and objectivity of sources they come from, and it shows people how important it is to have credible information to make informed judgments and the ethical use of the information they consume.
. The organisms shown below live in or near bodies of water. Some are
classified as vertebrates and some as invertebrates.
Which organism is classified as an invertebrate?
A. crab
B. fish
C. manatee
Answer:
A. crab
Crab is an invertebrate.
15 points!! pleas help! A rollercoaster cart that has a mass of 4500 kg has 67.5 kJ (kilojoules), or 67,500 J (joules), of gravitational potential
energy. What is its height above the ground?
PT.2
The same 4500 kg rollercoaster cart is moving with 63.0 kJ (kilojoules), or 63,000 J (joules), of kinetic energy at the
bottom of its biggest hill. What is its velocity?
Which of the following statements best describes a difference between
nuclear fission and nuclear fusion reactions?
Nuclei gain electrons during fission and release electrons during fusion.
Fission generates potential energy, and fusion generates kinetic energy.
С
C
Heavy nucleus split during fission and two light nuclei bind together during
fusion.
O
Fission forms heavier elements, and fusion forms lighter elements.
Answer:
C
Heavy nucleus split during fission and two light nuclei bind together during
fusion.
Use the "Law of Reflection" to describe why you cannot see your reflection in a piece
of paper.
Answer:
it does not mirror the image
A drop of oil of volume 10 ^-10 m3 spreads out on water to make a circular film radius 10^-1m what is the thickness of the film
Answer:
The thickness of the film is = 3.183e-9m
Explanation:
It will help us if we understand that the shape of the circular film can be approximated to be a cylinder. The height of this cylinder, or its thickness, in this case, will be very small.
Since we can approximate the shape of the drop of oil to be a cylinder, after it has spread out on the surface of the water, we can use the cylindrical geometric formulas to find out how thick the film is.
The volume of a cylinder = [tex]\pi r^2 h[/tex]
our radius is given as [tex]10^{-1}m = 0.1m[/tex]
the volume is [tex]10 ^{-10} m^3=1e-10m^3[/tex]
Remember that our task is to find the height of the cylinder. We can do this by making the height the subject of the formula.
[tex]h = \frac{Volume}{\pi r^2} = \\\\\frac{1e-10}{\pi \times 0.1^2} = 3.183e-9m[/tex]
Therefore, the thickness of the film is = 3.183e-9m
Which statement describes the image?
This is an image of an elliptical galaxy.
This is an image of an irregular galaxy.
This is an image of a normal spiral galaxy.
This is an image of a barred spiral galaxy.
Answer:
Its a barred spiral galaxy
Explanation:
Answer:
It is d
Explanation:
A pulse with a height of +0.5 meter encounters a second pulse with a height of +2.3 meters. A. The two pulses interfere: B. The resulting height of the medium when the pulses interfere will be: ____m
CAN SOMEONE IN THE COMMETS ON EDG HELP ME WITH THIS IM NOT DOING THIS 4 POINTS I ACTULLY NEED HELP AND STRUGGLING U GUYS CAN CAN PUT A 1.0 STAR I REALLY DONT CARE BUT CAN SOMEONE HELP PLZ
What is physic?............
Physics is the study of nature and law
Answer:
Physics is the science of matter and how matter interacts. Matter is any physical material in the universe. Everything is made of matter. Physics is used to describe the physical universe around us, and to predict how it will behave.
I’m think 3 or 1.. am I right?
Answer:
C-3 I beleive it is three!!!!
Explanation:
Hope this helps!
Have a grreat day!
-Hailey
Answer:
it is n2+3
Explanation:
A plane flies along a straight line path after taking off, and it ends up 220 km farther east and 100.0 km farther north, relative to where it started. In what direction did it fly on the straight line path?
Answer:
North east
Explanation:
The distance travelled by a plane from one point to another is the shortest distance between the two points. This distance travelled is usually a straight line path from point 1 to point 2.
Since the plane ends up 220 km farther east and 100.0 km farther north, the direction of flight for the plane is in the North-East direction.
Let x represent the distance travelled by the plane. Hence:
x² = 100² + 220²
x² = 58400
x = 241.66 km
What is density?
A- How much space an object takes
up
B- The amount of matter in a certain
amount of space
C- How much water an object
displaces
D- How much an object is affected by
gravity
Answer:
B- The amount of matter in a certain
amount of space
Explanation:
Density is the amount of matter an object has in a certain space. To find density, divide the mass of an object by the volume of an object.
Answer:
C- How much water it displaces
Explanation:
The shortening of a transmitted signal's wavelength and/or an increase in its frequency, which indicates that the object is
moving toward the observer, is called the
Answer: The Doppler effect occurs when a source of a wave is moving relative to an observer (or the observer is moving relative to the source). In this case, the apparent frequency of the sound, as heard/seen by the observer, is shifted with respect to the original frequency of the wave.
More specifically, the relationship between the apparent frequency, f', and the original frequency, f, is given by:
where:
is the velocity of the wave
is the velocity of the observer relative to the source, and it is positive if the observer is moving towards the source, and negative if the observer is moving away from the source
is the velocity of the source relative to the observer, and it is positive if the source is moving away from the observer, and negative if the source is moving towards the observer
The doppler effect occurs in many daily-life situations: for instance, when an ambulance approaches you, you hear an increase in the apparent frequency of the siren due to the Doppler effect. Another example is the movements of distant galaxies from us: when they move away from us, the apparent frequency of the light they emit decreases, so their wavelengths appear to increase towards the red color (red-shift); on the contrary, when they are moving towards us, the apparent frequency seems to increase, so the wavelength seems to decrease towards the blue color (blue-shift).
Explanation:
Which of the following statements is best supported by the data in the table?
Choose 1 answer:
Choose 1 answer:
(Choice A)
A
The genes for having large fruit became more common in the S. lycopersicum population over time due to selection of the large fruit trait by humans.
(Choice B)
B
During the process of tomato domestication, humans likely crossed plants with a higher-than-average number of fruits per inflorescence to create each new generation.
(Choice C)
C
Having many fruits per cluster is a disadvantageous trait for S. pimpinellifolium in the wild, likely because of the energy costs associated with fruit development.
(Choice D)
D
The genes for having large fruit became more common in the S. pimpinellifolium population over time, likely because the large fruit trait increased the probability of seed dispersal.
Answer: Choice A)
Explanation:
doc based on this lab: https://phet.colorado.edu/sims/html/wave-on-a-string/latest/wave-on-a-string_en.html
Answer:
hope it helps make brainlliest ty
how do we calculate the value of work?
Answer:
Work = Force × Distance
Explanation:
Work = Force × Distance
The SI unit of work is Joule
-TheUnknownScientist
What protects and supports body organs and provides a framework the muscles use to support movements,made up of bones and joints
Answer: Skeletal system
Explanation:
The skeletal system is a framework of the body. It comprises of connective tissues like bones, tendons, ligaments, and cartilage. All these connective tissues of the skeletal system connect with the muscular system of the body this helps in the locomotion of the body. The conjugation of the musculoskeletal system will also protect the internal organs of the body and will prevent the internal organs from injuries.
Answer:
the skeletal system
Explanation:
Because our skeleton is the framework of the body. :)
what is frictional less pulley
Answer:
Conditions under which the belt and pulleys are operating – The friction between the belt and pulley may decrease substantially if the belt happens to be muddy or wet, as it may act as a lubricant between the surfaces.
Explanation:
I hope that this would be helpful
What way is more effective when trying to make magnets repel further/faster, using strong magnets over weak magnets or putting the magnets closer together?
Answer:
north pole of a magnet repels the north pole of another magnet no matter of their shape , size , weakness , strength ,etc .
Explanation:
Can someone help me with this please
A body of mass 36 g moves with SHM of amplitude A = 13 cm and period T = 12 s. At
time t=0 the displacement, x, is 13 cm. (a) Find the velocity when x = 5 cm. (b) Find the
force acting on the body when t = 2 s.
Answer:
Explanation:
.......................
Which of the following is produced as a result of photosynthesis
A. Water
B. Heat
C. Oxygen
D. Carbon dioxide
Answer:
The actual answer would be c, oxygen.
Explanation:
Plants need the energy glucose provides in order to grow and reproduce. Glucose is also required for the process of cellular respiration, in which plants convert carbon dioxide from the air into oxygen.
Use Newton's second law of motion and a free-body diagram to...
1. ...calculate the normal force acting upon a 50-kg passenger who accelerates upward at a rate of 3.0 m/s/s.
2. ...calculate the normal force acting upon a 50-kg passenger who accelerates downward at a rate of 3.0 m/s/s.
Please don't put any links or I will report you.
Which beach balls have potential energy and not kinetic energy?
Answer:
Beach ball 4
Explanation:
it is because, Potential Energy = M G H
P(e) directly proportional to H.
if H increase then P energy also increases
describe how a wheel and axle work?
A weally works when you pull something and a axle is something that you can push
Explanation:
I hope this helps
Write an essay about the things an individual must do in order to adapt and survive the changes that are happening in his/her environment.
Which of the following depicts xylem?
Why do electric fish need to force electric charges to move?