The molecular formula of the compound, given that it contains 51.39% carbon, 8.64% hydrogen, and 39.97% nitrogen is C₆H₁₂N₄
How do i determine the molecular formula?To obtain the molecular formula, we must first determine the empirical formula. Details on how to obtain the empirical formula is given beloww:
Carbon (C) = 51.39%Hydrogen (H) = 8.64%Nitrogen (N) = 39.97%Empirical formula =?Divide by their molar mass
C = 51.39 / 12 = 4.283
H = 8.64 / 1 = 8.64
N = 39.97 / 14 = 2.855
Divide by the smallest
C = 4.283 / 2.855 = 1.5
H = 8.64 / 2.855 = 3
N = 2.855 / 2.855 = 1
Multiply through by 2 to express in whole number
C = 1.5 × 2 = 3
H = 3 × 2 = 6
N = 1 × 2 = 2
Thus, we can conclude that the empirical formula is C₃H₆N₂
Finally, we shall determine the molecular formula. Details below
Empirical formula = C₃H₆N₂Molar mass of compound = 140.22 g/molMolecular formula =?Molecular formula = empirical × n = mass number
[C₃H₆N₂]n = 140.22
[(12×3) + (1×6) + (14×2)]n = 140.22
70n = 140.22
Divide both sides by 70
n = 140.22 / 70
n = 2
Molecular formula = [C₃H₆N₂]n
Molecular formula = [C₃H₆N₂]₂
Molecular formula = C₆H₁₂N₄
Learn more about molecular formula:
https://brainly.com/question/21568927
#SPJ1
What is eutectic temperature
The eutectic point is the lowest temperature at which the liquid phase is constant at a particular pressure.
What does the word "eutectic" mean?A melting composition known as a eutectic consists of at least two components that melt and freeze at the same rates. The components combine during the crystallisation phase, operating as a single component as a result.
What are eutectic pressure and temperature?The eutectic is the system's lowest melting point under its own pressure; it has a matching temperature called the eutectic temperature and produces the eutectic liquid as a result. In terms of composition, eutectic liquids are located between the system's solid phases.
To know more about eutectic visit:-
https://brainly.com/question/27886492
#SPJ1
Round to 2 significant
figures.
5,249
5,250. The number was rounded up from 5,249 because the last digit, 9, is greater than or equal to 5.
What is rounded up?Rounding up is a mathematical operation that involves increasing a number to its nearest whole number. It is commonly used when dealing with money, measurements, or statistics. When rounding up, the number is increased to the next highest whole number. For example, if a number is 6.7, it would be rounded up to 7. Rounding up is often used when dealing with exact measurements or estimates to simplify the calculations. It can also be used to make the results of a calculation easier to understand. In the case of money, rounding up can be used to round a number to the nearest dollar. This prevents dealing with fractional amounts of money. Rounding up can also be utilized in statistical analysis, such as in the calculation of mean or median. This simplifies the data and prevents dealing with fractions or decimals.
To learn more about rounded up
https://brainly.com/question/17396482
#SPJ9
6. What is the pH of a 0.25 M solution of NH4Cl? [Kb(NH3) = 1.8 10–5
The Ammonium Chloride solution at 0.25 M has a pH of 2.67.
Why is the pH of Ammonium Chloride below 7?As a result, the weak basic (Chlorine) in the solution is overpowered by the conjugate acid (Ammonium cation), making the solution mildly acidic. According to the equation pH =log[Hydrogen ion], an acidic solution has a pH lower than 7. Aqueous ammonium chloride solution has a pH that is less than 7.
Ammonium cation + Water ⇌ Nitrogen trihydride + Hydronium ion
Kb = [Nitrogen trihydride][Hydronium ion] / [Ammonium cation]
[Nitrogen trihydride] = [Hydronium ion] = x
[Ammonium cation] = 0.25 - x
Kb = [Nitrogen trihydride][Hydronium ion] / [Ammonium cation]
1.8 × 10–5 = x² / (0.25 - x)
1.8 × 10–5 = x² / 0.25
x² = 4.5 × 10–6
x = 2.12 × 10–3
pH = -log[Hydronium ion] = -log(2.12 × 10–3) = 2.67
To know more about solution visit:-
https://brainly.com/question/30665317
#SPJ1
Question 5(Multiple Choice Worth 3 points)
(07.02 LC)
The substances below are listed by increasing specific heat capacity value. Starting at 30.0 °C, they each absorb 100 kJ of thermal energy. Which one do you expect to increase in temperature the least?
a) Cadmium, 0.230 J/(g °C)
b) Sodium, 1.21 J/(g °C)
c) Water, 4.184 J/(g °C)
d) Hydrogen, 14.267 J/(g °C)
Component form of the vector v is as follows: 4 3 1.5 1 Using the standard basis vectors I and j), express the vector w as follows: 3 two 1 4 pp . 1 3 w 3.5 C. V plus w= d. Determine the vector v's magnitude
What does "vector" mean?
Latin word for "carrier" is "vector." Point A is transported to point B by vectors. The orientation of the vectors AB is the direction in which point A is moved in relation to point B, and the amplitude of the vector is the width of the line connecting the two locations A and B. The terms Euclidean vectors and spatial vectors are also used to refer to vectors.
A vector space is what?
A vector space, also known as a linear space, is a collection of things called vectors that can be added to and multiplied ("scaled") by figures called scalars in the fields of mathematics, physics, and engineering.
To know more about vector visit:
https://brainly.com/question/27854247
#SPJ1
In the Periodic Table below, shade all the elements for which the neutral atom has an outer electron configuration of ms2nd2, where n and m are integers, and =m+n1.
The elements that have an outer electron configuration of ms2nd2 are located in the d-block of the periodic table and include some of the transition metals and lanthanides.
What is the periodic table?To determine which elements in the periodic table have this outer electron configuration, you can look at the position of the d-block elements in the table. The d-block elements are located in the middle of the table and include the transition metals. These elements have partially filled d orbitals, which can accommodate up to 10 electrons.
Elements in the d-block with an atomic number of 21 through 30 (scandium through zinc) have an outer electron configuration of d10s2 and do not fit the ms2nd2 configuration. However, elements in the d-block with an atomic number of 39 through 48 (yttrium through cadmium) have an outer electron configuration of d10s2p1 and can have the ms2nd2 configuration by removing the single electron in the p orbital. Elements in the d-block with an atomic number of 57 through 80 (lanthanum through mercury) also have the possibility of having an outer electron configuration of ms2nd2.
Learn more about periodic table:https://brainly.com/question/11155928
#SPJ1
The two possible units of molarity are
Answer: The units for molarity are moles/liter.
Similarly, the equation to find molarity is moles divided by liters.
Explanation:
mol / L is a unit of molar concentration. These are the number of moles of dissolved material per liter of solution. 1 mol / L is also called 1M or 1molar. Mol / m3 is also a unit of molar concentration.
Molarity is expressed in units of moles per liter (mol / L). This is a very common unit, so it has its own symbol, which is the uppercase M. A solution with a concentration of 5 mmol / l is called a 5 M solution or has a concentration value of 5 mol.
The molar concentration of the solution is equal to the number of moles of the solute divided by the mass of the solvent (kilogram), and the molar concentration of the solution is equal to the number of moles of the solute divided by the volume of the solution (liter). increase.
A flask filled to the 25.0 ml mark contain 29.97 g of a concentrated salt water solution. What is the density of the solution?
A concentrated saltwater solution weighing 29.97 g and fitting into a flask to the mark of 25.0 ml has a density of about 1199.2 g/L.
How is the density of the solution determined?By dividing the solution's mass by its volume, we may get its density: density = mass/volume
We need to know the density of water at the solution's temperature as well as the capacity of the flask up to the 25.0 ml level in order to calculate the volume of the solution.
Since 1 mL = 0.001 L, volume is equal to 25.0 mL, or 0.0250 L.
Now, we may determine the solution's density as follows:
1199.2 g/L or 29.97 g/0.0250 L is what is referred to as density.
To learn more about density visit:
brainly.com/question/26279986
#SPJ9
What happens when a solid is dissolved into a liquid?
.
CaCO3 + 2HCI =CaCl2 + H₂O + CO2
5. Calcium carbonate (CaCO3) combines with HCl to produce calcium chloride (CaCl₂),
water, and carbon dioxide gas (CO₂). How many grams of HCI are required to react with
6.35 mol CaCO3?
463.5 grams of HCl are required to react with 6.35 moles of CaCO₃.
What is meant by molar mass?Mass of one mole of substance is referred to as the molar mass. The molar mass of a substance can be calculated by adding up the atomic masses of all the atoms in a molecule.
Balanced chemical equation for the reaction between calcium carbonate (CaCO₃) and hydrochloric acid (HCl) is: CaCO₃ + 2HCl → CaCl₂ + H₂O + CO₂
6.35 mol CaCO₃ * 2 mol HCl / 1 mol CaCO₃ = 12.7 mol HCl
Now, we use the molar mass of HCl (36.46 g/mol) to convert from moles to grams: 12.7 mol HCl * 36.46 g/mol = 463.5 g HCl
Therefore, 463.5 grams of HCl are required to react with 6.35 moles of CaCO₃.
To know more about molar mass, refer
https://brainly.com/question/837939
#SPJ1
At 25 ∘C
, the equilibrium partial pressures for the reaction
A(g)+2B(g)↽−−⇀C(g)+D(g)
were found to be A=5.63
atm, B=5.00
atm, C=5.47
atm, and D=5.63
atm.
What is the standard change in Gibbs free energy of this reaction at 25 ∘C
?
The standard change in Gibbs free energy of the reaction at 25 ∘C is -1.69 kJ/mol.
What is standard change?
To find the standard change in Gibbs free energy of the reaction, we need to use the following equation:
ΔG° = -RT ln(K)
where ΔG° is the standard change in Gibbs free energy, R is the gas constant (8.314 J/mol·K), T is the temperature in Kelvin (25 °C = 298 K), and K is the equilibrium constant.
To find K, we need to use the equilibrium partial pressures:
K = (PC × PD) / (PA × PB²)
where PA, PB, PC, and PD are the equilibrium partial pressures of A, B, C, and D, respectively.
Substituting the values, we get:
K = (5.47 atm × 5.63 atm) / (5.63 atm × (5.00 atm)²)
K = 0.6176
Now we can calculate the standard change in Gibbs free energy:
ΔG° = -RT ln(K)
ΔG° = -(8.314 J/mol·K) × (298 K) × ln(0.6176)
ΔG° = -1,690 J/mol or -1.69 kJ/mol
Therefore, the standard change in Gibbs free energy of the reaction at 25 ∘C is -1.69 kJ/mol.
What is free energy?
Free energy, also known as Gibbs free energy, is a thermodynamic quantity that represents the amount of energy in a system that is available to do work at a constant temperature and pressure. It is denoted by the symbol G and is expressed in units of joules (J) or calories (cal).
In simple terms, free energy is the energy that can be used to do work. It is defined by the equation:
ΔG = ΔH - TΔS
where ΔH is the change in enthalpy (heat content) of the system, ΔS is the change in entropy (disorder) of the system, and T is the absolute temperature in Kelvin.
If ΔG is negative, the reaction is spontaneous and can proceed without the input of external energy. If ΔG is positive, the reaction is non-spontaneous and requires energy input to proceed. If ΔG is zero, the system is at equilibrium.
To know more about free energy, visit:
https://brainly.com/question/14150518
#SPJ1
What is true of spontaneous reactions?
O They are indicated by a negative change in Gibbs free energy.
O They have a positive value of AS.
O They are instantaneous.
O They always release heat.
Help 20pts