Answer:
A
Explanation:
What is the definition of an Arrhenius acid?
Answer:
increases [H+]
Explanation:
What is T in the equation G = H - TS?
A.
The temperature in kelvins at which the reaction is happening
B.
The temperature in degrees Celsius at which the reaction is run
C.
The temperature required to make the reaction spontaneous
D.
The temperature at which the Gibbs free energy is zero
The answer is A.
The T in the equation G = H - TS is the temperature in kelvins at which the reaction is happening. The correct option is A.
What is temperature?Temperature is the measurement of the coldness or hotness of a body. The SI unit of the temperature is kelvin and Celsius. The high-temperature regard hotness and the low temperature means a cold area.
G = H – TS is the equation to calculate Gibbs free energy.
Where G = Gibbs free energy
H = enthalpy
T = temperature
S = entropy
Gibbs free energy is the total amount of energy that is taken to do the work in a closed system. The entropy is the total amount of energy that is not useful for work. The temperature is the variable in this equation.
Thus, the correct option is A. The temperature in kelvins at which the reaction is happening.
To learn more about temperature, refer to the link:
https://brainly.com/question/4002787
#SPJ2
Can someone help me?
Answer:
b
Explanation:
I don't know that is what the outcome is I think
At what temperature would a 1.30 m NaCl solution freeze, given that the van't Hoff factor for NaCl is 1.9? Kf for water is 1.86 ∘C/m .
Answer:
-4.59°C
Explanation:
Let's see the formula for freezing point depression.
ΔT = Kf . m . i
ΔT = Freezing T° of pure solvent - Freezing T° of solution
Kf = Freezing constant. For water if 1.86°C/m
m = molality (moles of solute in 1kg of solvent)
i = Van't Hoff factor.
0°C - Freezing T° of solution = 1.86°C /m . 1.30m . 1.9
Freezing T° of solution = - (1.86°C /m . 1.30m . 1.9)
Freezing T° of solution = - (1.86°C/m . 1.30m . 1.9) → -4.59°C
NaCl → Na⁺ + Cl⁻
what is the difference b/w combustion and synthesis reaction ?explain with example
Answer:
A synthesis reaction occurs when two or more reactants combine to form a single product in a double replacement reaction two compounds exchange elements. Combustion reaction occurs when a substance reacts quickly with oxygen combustion is commonly called burning. Example'- for synthesis reaction is iron+ oxygen —≥ water . Example:- for combustion reaction is often gaseous products.
may be this was ur answer I hope it might help u
What happens to that atom of magnesium-24 if it GAINS a PROTON
Answer:
Adding or removing protons from the nucleus changes the charge of the nucleus and changes that atom's atomic number. So, adding or removing protons from the nucleus changes what element that atom is! For example, adding a proton to the nucleus of an atom of hydrogen creates an atom of helium
Explanation:
Find the molarity of a solution made by dissolving 12.5 g sodium carbonate in 500.0 mL total solution
Answer:
The molarity of a solution is "25 M".
Explanation:
The given values are:
Moles of solute,
= 12.5 g
Volume of solution,
= 500 mL
i.e.,
= 0.5 L
Now,
The molarity will be:
= [tex]\frac{Number \ of \ moles \ of \ solute}{Volume \ of \ solution}[/tex]
On substituting the values, we get
= [tex]\frac{12.5}{0.5}[/tex]
= [tex]25 \ M[/tex]
How would you describe the size of our sun compared to a red dwarf and a supergiant?
The sun is the same size as a red dwarf.
The sun is the same size as a supergiant.
The sun is smaller than the red dwarf and the supergiant.
O The sun is larger than a red dwarf but smaller than a supergiant.
Answer:
D is the answer
Explanation:
Hey I'm Chloe can you Help me, Thank you :)
What pigment, only present in plants, makes photosynthesis possible?
Answer:
la photosintesis viene de la clorofila de la planta
If the knot (W) travels 2 meters in 1 second, we say it has a _____ of 2 m/s.
Answer:
we say it has a speed of 2m/s
Assignment Prompt
In this assignment, you will research the relationship between different types of energy when energy is
being transformed. You will present your findings in the form of bar graphs or pie charts that show the
forms of energy at different times in the process. You will then create a poster to display your findings.
Your poster should include a title, a brief description of the energy transformation you are showing, your
graphs, and works cited.
Assignment Instructions
Step 1: Gather materials and necessary information.
a) You will choose an energy transformation to show. Some of the ones you have learned about
include those that occur in a burning bonfire and a wind turbine.
• Do research to find out about an energy transformation that affects your daily life.
• Find out what the starting types of energy are and what the ending types of energy are.
• Decide how many steps in the process your poster will show.
• Create bar graphs or pie charts to show the relationship between the different types of
energy at different steps in the transformation process.
b) Be sure to keep a list of your references so you can cite them later.
Step 2: Decide on a title.
a) Begin by deciding on a title for your poster and writing it neatly at the top.
b) The title should identify the energy transformation you are showing.
Step 3: Create your graphs.
a) Decide how many graphs you will need to show the energy transformation.
b) You should have at least 3 graphs so that the steps of the transformation will be clear.
c) Each graph should be clearly labeled.
d) Careful use of color on your graphs will make them easy to read and understand.
Step 4: Decide on the descriptive words to include on your poster.
a) People looking at your poster may need more information than just the title and the
graphs. Decide on how you want to present the information your viewers need.
b) Keep the information as short as possible while still including what you need. Remember that
when people look at a poster, they focus on the graphics.
Step 5: Decide on the best layout for your poster.
a) You want to incorporate your text and visuals in a way that is attractive and attention-getting.
b) Keep your graphics as large as possible.
Step 6: Put your poster together.
Step 7: Cite your sources.
a) In the lower right-hand corner of your poster, create a section titled Works Cited.
b) List the resources you used to create your poster. A simple list of website titles and
addresses (URLs) is acceptable. If you used print sources, list the title, author, publisher, city,
and date. The print for this section can be small; it needs to be readable close-up.
Step 8: Identify yourself as the creator of the poster.
a) Place your name in the lower right-hand corner of the poster.
b) On the back, write your teacher’s name and the due date for the poster.
Step 9: Evaluate your poster using this checklist.
If you can check each criterion below, you are ready to submit your presentation.
Yes No Evaluation Question
Does your poster have a title that grabs interest and tells what your subject is?
Are the graphs clearly labeled?
Are the graphs bright and colorful?
Is the text on the poster clearly written so that the viewer understands what you are trying
to show?
Is it free from misspellings?
Is your poster laid out in a way that invites people to look at it?
Have you included your name and works cited?
Is your entire poster neat and attractive?
Step 10: Revise and submit your poster.
a) If you were unable to check off all the requirements on the checklist, revise your poster
before submitting it.
b) Ask your teacher for further instructions about presenting your poster to an audience of your
peers.
Resource Suggestions
• Bar Graph
• Pie Chart
please help! you need to make a poster with any kind of paper and no drawing and if you do any drawing on the poster make it the skill of a 6th grader 100 points plus brainly if you get it right
Answer:
give other guy brainliest
Answer:El mercantilismo en Gran Bretaña consistió en la posición económica de que, para aumentar la riqueza, sus colonias serían proveedoras de materias primas y exportadoras de productos terminados. El mercantilismo provocó muchos actos de lesa humanidad, incluida la esclavitud y un sistema de comercio desequilibrado.
Explanation:
An element ceases to be that element if the particle it loses or gains is a neutron.
True or false
Answer:
False
Explanation:
An element is named according to the number of protons in the nucleus. If it gains or loses a neutron, it becomes a different isotope of the same element.
The given statement is false.
Answer:
FALSEExplanation:
#CARRYONLEARNING
Why are most anions basic in H2O? Give formulas of four anions that are not basic.
Answer:
The anions that can act as bases (conjugate bases of weak acids) have the capability to hydrolyse water and produce OH− ions. Cl−, Br−NO−3, SO2−4 are all conjugate bases of strong acids that don't have the capability to hydrolyse water and so they aren't basic.
Explanation:
Write the correct formula for each compound named below. Show the from which it is formed.
Answer:
Explanation:
Sodium Chloride = Na⁺ + Cl⁻ = NaCl
Lithium bromide = Li⁺ + Br⁻ = LiBr
Magnesium fluoride = Mg ⁺² + F⁻ = Mg₂F.
Potassium Oxide = K⁺ + O⁻² = K₂O
Calcium sulphide = Ca⁺² + S⁻² = CaS
Aluminum Iodide = Al⁺³ + I⁻ = Al I₃
Barium bromide = Ba⁺² + Br⁻ = BaBr₂
Aluminum sulphide = Al⁺³ + S⁻ = Al₂S₃
Calcium Phosphide = Ca⁺² + P⁻³ = Ca₃P₂
Lithium Nitride = Li⁺ + N⁻³ = Li₃N
Magnesium Oxide = Mg⁺² + O⁻² = MgO
Aluminum Fluoride = Al⁺³ + F⁻ = AlF₃
Lithium Oxide = Li⁺ + O⁻² = Li₂O
Beryllium iodide = Be⁺² + I⁻ = BeI₂
How many moles of gas would be present in a gas trapped within a 37.0 L vessel at 80.00C at a pressure of 2.50 atm
go here is the answer key
http://msschmidly.weebly.com/uploads/2/6/2/0/26201624/gases_review___calculations.pdf
According to ideal gas equation, there are 271472.7 moles of gas present in a gas trapped within a 37.0 L vessel at 80.0°C at a pressure of 2.50 atm.
What is mole?Mole is defined as the unit of amount of substance . It is the quantity measure of amount of substance of how many elementary particles are present in a given substance.
It is defined as exactly 6.022×10²³ elementary entities. The elementary entity can be a molecule, atom ion depending on the type of substance. Amount of elementary entities in a mole is called as Avogadro's number.
It is widely used in chemistry as a suitable way for expressing amounts of reactants and products.For the practical purposes, mass of one mole of compound in grams is approximately equal to mass of one molecule of compound measured in Daltons .Molar mass has units of gram per mole . In case of molecules, where molar mass in grams present in one mole of atoms is its atomic mass.
Substitution of values in ideal gas equation gives,n= 2.5×37/8.314×353=271472.7 moles.
Learn more about moles,here:
https://brainly.com/question/26416088
#SPJ3
Multiplication & Division
Language of Chemistry
llus
Perform the following
mathematical operation, and
report the answer to the correct
number of significant figures.
0.008 : 51.3
[? ? ] x 100)
Enter
Answer:
0.008 ÷ 51.3 = 0.00015594541910331380.00015594541910331382Round 0.0001559454191033138 → 0.0002 (Sig Figs: 1)
Which of the following best describes the difference between metals and nonmetals?
a
metals tend to have low melting points and nonmetals have high melting points
b
nonmetals are more reactive than metals
c
metals are brittle and dull
d
metals have high melting points and are malleable, whereas, nonmetals have lower melting points and tend to be brittle.
Answer:
the answer is d.
Explanation:
because metals are refers to natural elements that are hard, shiney, opaque, and dense. nonmetals implies thise chemical substances that are soft, non-shiney, transparent and brittle.
Question number 12 I need help
Answer: Its B.
Explanation:
i cant quite explain
List and Describe the two groups of clastic sedimentary rock.
Answer:
Clastic sedimentary rocks are formed from rock fragments or clasts; chemical sedimentary rocks precipitate from fluids, and biochemical sedimentary rocks form as precipitation from living organisms.
Sedimentary rock is classified into two groups based on how they form. They are clastic and chemical. Clastic sedimentary rock is formed as bits of weathered rock become cemented together. Because all kinds of rock are subject to weathering many different minerals can make up this group of rocks.
What is the mass of 3.4 moles of NaCl?
Answer: 140.4 grams. One mole would be 58.5 grams, or 23 (the atomic mass of sodium) + 35.5 (the atomic mass of chlorine)
Explanation:
Answer:
3.4 * 58.5 = 198. 9 grams
questions.
1) The degree of polarity of a bond is indicated by
A. Ionization energy difference
B. The shape of the molecule
C. Electronegativity difference
D. The partial charges of the molecule
2) When electrons are shared unequally, chemists characterize
Answer:
d
Explanation:
the partial charges of the molecule
Can someone please fill in the blanks?
Answer:
g3gegsgehshhwwjwuwuwu2euyeeyeyyy
Answer:
helium formula He
Ammonia formula NH3
methane formula CH₄
chlorine formula Cl-
Explanation:
If the Temperature exerted on a sample of gas is increased from 273K to 410K, and the initial pressure is 1.3317 atm what is the final pressure in atm?
Answer: 2.00 atm
Explanation:
P1/T1 = P2/T2
1.3317/273 = P2/410
P2 = 2.00 atm
SOMEONE HELP WITH THAT THING PLSSS( I also didn’t know what to put as the topic)
Answer:
hope this helps
Explanation:
Water was on earth with the dinosaurs and almost at the very start.
Water starts anywhere from clouds to ponds
I choose ponds, water evaporates from the sun and moves its way through the air being collected into clouds in the atmosphere, clouds are evaporated water molecules, then the water combines to form rain wich then end up on a hill and travel back to a water source or goes into the ground and makes groundwater and if there is enough rain overtime will form a pond.
What is the name of the test used to find out the gas produced when calcium reacts with sulfuric acid? *
1.Lime Water
2.lighted splint
3.litmus paper
4.glowing splint
Answer:
1
Explanation:
calcium react with sulphuric acid to produce carbon dioxide which turns lime water milky
How many meters per second is 1.61kilometers per minute?
Answer:
26.83333
Explanation:
I have 8 valence electrons, completely nonreactive, and my family contains Helium that is used to fill balloons! I must be a...
a
metal
b
nonmetal
c
metalloid
d
noble gas
Answer:
Noble gas
Explanation:
Noble gases are complete octets ( have 8 valence electrons) Helium is a member of this family.
Cytokinesis happens differently for plant and animal cells. Both separate cytoplasm between two new daughter cells. However, which type of cell cytokinesis looks like a balloon being separated by a string being pulled tightly between them?
Question 4 options:
Plant Cell cytokinesis
Animal Cell Cytokinesis
Both
Neither
Answer:
Animal Cell Cytokinesis
Explanation:
Answer: Animal cell
Explanation:) It refers to the process of cell division, which takes place during mitosis, is known as cytokinesis.
The process of cytokinesis is different for animal cell and plant cell.
Where, in case of plant cell, a separation, known as cell plate is formed along the center of the parent cell, which is responsible for the separation of the cells.
Whereas, in case of animal cell, the plasma membrane contracts itself along the center, until the two daughter cells are separated from each other.
Hence, from the given information of the question,
The correct answer is animal cell.
How can you model the movement of a primary wave?
Answer:
P-waves (primary or compressional waves) are longitudinal or compression waves, able to move through solids, liquids, and gases at speeds ranging between 300-5,000 metres per second. As they travel through rock, they move particles back and forth in the same direction that the wave is moving
Explanation:
Determine the correct set-up below to determine what mass, in grams, of N2 is needed to completely react with 105 g F2 ?
Answer:
C: 1 mol F2/38 g F2
Explanation:
The reaction equation is;
N2 + 3F2 = 2NF3
Now, to know how many grams, of N2 is needed to completely react with 105 g F2 and since the molar mass of N2 is 28.02 g/mol, Molar mass of F2 is 38 g/mol, number of moles attached to N2 and F2 in the reaction are 1 and 3 moles respectively, then we will have;
105 g F2 × 1 mol F2/38 g F2 × 1 mol N2/3 mol F2 × 28.02 g N2/1 mol N2
Option C is Thus correct