Answers
Answer:
Explanation:
When we say anything is a wave, what exactly do we mean? The most intuitive and straightforward wave to envision is a water wave. A motion, more specifically, is a disturbance that propagates or travels away from its source. Water waves are caused by a disruption in the water's surface, such as a rock tossed into a pond or a swimmer splashing the surface continuously. The noise for sound waves is a rise of air pressure, which may be caused by the oscillating cone within a speaker. There are many kinds of disturbances in earthquakes, including surface disturbances and pressure disturbances under the surface. Even radio signals are best deciphered by using a comparison of sea waves Water waves are helpful to visualize since they are more than just a mental picture. The amplitude, period, frequency, and energy of water waves are all the same as they are for all waves. A small set of underlying principles can be used to describe all wave characteristics.
(hope this helps can i plz have brainlist :D hehe)
Related Questions
pls show your work thank you will mark the Brainliest
Answers
Answer:
1.42L of the 9.0M NaOH are required
Explanation:
Molarity is an unit of concentration in chemistry defined as the ratio of the moles of a solute (In this case NaOH) and the volume of the solution.
To solve this question we must know the moles of NaOH required in 4.25L of a 3.0M NaOH as follows:
4.25L * (3.0moles / L) = 12.75 moles of NaOH are required
As all NaOH must come from the 9.0M NaOH the volume we need is:
12.75 moles NaOH * (1L / 9.0 moles NaOH) =
1.42L of the 9.0M NaOH are requiredcan somebody explain two dimensional gas chromatography in arson investigation
Answers
Answer:
Comprehensive Two-dimensional gas chromatography, or GCxGC is a multidimensional gas
At STP (101.3 kPa, 0 °C), what volume would 2.00 moles of oxygen gas occupy? The gas constant is 8.31
Answers
Answer:
44.8 L
Explanation:
Ideal Gas Equation -
i.e.,
PV = nRT
where,
P = pressure
V = volume
n = moles
R = universal gas constant
T = temperature
Using the information given in the question, Volume of the gas can be calculated -
P = 101.3 kPa
V = ?
n = 2.00 moles
R = 8.31
T = 0 degree C = 273.15 K
Using the above data, and putting the data in the respective formula -
PV = nRT
101.3 kPa * V = 2.00 moles * 8.31 * 273.15 K
V = 44.8 L
Hence, the volume of the given gas = 44.8 L
c4h8o3 lewis structure
Answers
Answer:
what
Explanation:
ummm I... . .. .. . . . . . . . . .
BRAINLIEST WILL BE GIVEN, PLZ HELP + 15 PTS
Which properties are characteristic of true solutions? (Select all that apply.)
The light beam is unaffected.
The particles are larger than 10 -8 cm.
The particles are dissolved.
The particles are suspended indefinitely.
Answers
Answer:
The correct answer is the last option
Explanation:
PLEASE HELP!!!
Explain how an electric car might still run on fossil fuels.
Answers
Answer:
Explanation:
When you use electricity to charge your car, you can integrate renewable resources like solar into the fueling process. Without solar, your electric vehicle is still effectively running off of fossil fuels – it's just the fossil fuels utilized at the power plant and not within your engine.
Fossil fuels include substances like natural gas, coal, and oil. It is possible for electric cars to run on these fossil fuels. Fossil fuels like coal are burnt up to generate electricity. So when cars run on electricity, they are indirectly tapping into fossil fuels.
As the world continues to seek measures to reduce carbon emissions, electric cars are gradually becoming an option. While it is true that these fossil fuels might not be used directly on electric cars, they still find use indirectly in these cars. When coal is burnt up at the power plant to generate electricity, electric cars tap into fossil fuels indirectly.Learn more here:
https://brainly.com/question/10172005
A catalyst is:
one answer only pls help lol
Answers
Answer:
the second one
Explanation:
it makes the most sense
Using an analogy of a water balloon, describe the function of the bladder.
Answers
Answer:
A bladder is like a balloon, because it holds urine, just like a balloon holds air. The urethra's function is to excrete urine from the human body.
Explanation:
A bladder and a balloon are similar, because it is the bladder which clasp urine, whereas a balloon clench air. The role of urethra is to eliminate urine from our human body.
What is bladder?The hollow organ which is in triangle shape and found in the lower abdomen just like a balloon is defined as the bladder. The urinary bladder is also known as a temporary reservoir of urine. Urine is reserved in the urinary bladder till it is removed out through the urethra.
As a result of the contraction of the wall of the urinary bladder, urine is eliminated from the body from time to time. The urine contains waste and extra fluid left over the body which has to be eliminated.
The bladder resembles the water balloon in that it holds urine in the similar way as the water balloon clench water. The water balloon pops when the amount of water exceeds than it can hold.
Thus the function of bladder and water balloon are found to be same.
To know more about bladder, visit;
https://brainly.com/question/28496978
#SPJ6
Pt2 science......
Select correct answer ♡!
Answers
The color may change, precipitation may occur, bubbles may form, gas forms, and the temperature changes.
Mark if correct please!
PLEASE HELP!! 10 POINTS!
what could the fourth quantum number of a 2s^2 electron be?
Answers
Answer:
D. ms=+1/2.
Explanation:
Hello there!
In this case, since the quantum numbers are known as:
* Principal quantum number (n) which cannot be zero. The allowed values of n are therefore 1, 2, 3, 4, and so on.
* Angular quantum number (l) is able to be any integer between 0 and n-1. If n = 2, for example, l can be either 0 or 1.
* Magnetic quantum number (m) is able to be any integer between -l and +l. If l = 3, m can be either -3, -2, -1, 0, +1, +2 or +3.
* Spin Quantum Number (ms): ms = +½ or -½. Accounts for the orientation of the spin axis of an electron as it is able to spin in only one of two directions.
Thus, since the fourth quantum number is ms, spin, we infer that the answer is D. ms=+1/2 because it represents the positive spin on 2s^2.
Best regards!
Answer: ms = +1/2
Explanation: a pex
Choose the correct statement.
1. A single displacement reaction produces an element as a product.
2. A double displacement reaction occurs between an ionic and a covalent compound.
3. Products of a complete combustion reaction are carbon dioxide and water.
4. Synthesis and Decomposition reaction products cannot be predicted with certainty.
Answers
Answer:
1
Explanation:
single displacement replaces one element with another and it's product is a pure element.
Which would easily give up more electrons during bonding? Use Periodic Table.
Answers
Answer:
I'm pretty sure that it's lithium because it gives up one of their 3 electrons, so li
What reaction would you expect chromium to have with water
Answers
Answer: It does not react with water, but reacts with most acids. It combines with oxygen at room temperature to form chromium oxide. Chromium oxide forms a thin layer on the surface of the metal, protecting it from further corrosion (rusting).
Explanation:
The diagram below shows a group of water molecules.
The water molecules in the diagram are attracted to each other by
Answers
Answer:
hydrogen bonds, the positive and negative charges of the hydrogen and oxygen atoms that make up water molecules makes them attracted to one another.
Determine which molecule in each pair has the stronger intermolecular forces. Explain why. The main reason that NH3 has [ Select ] intermolecular forces than CH4 is that NH3 [ Select ] . The main reason that NO2 has [ Select ] intermolecular forces than CO2 is that NO2 [ Select ] . The main reason that CS2 has [ Select ] intermolecular forces than CO2 is that CS2 [ Select ] .
Answers
Answer:
See explanation
Explanation:
As for NH3 and CH4, the former is a polar molecule and possess a dipole. Hence, in addition to dispersion forces, dipole-dipole interaction as well as hydrogen bonding creates a stronger intermolecular interaction than in nonpolar CH4 where only dispersion forces are in operation.
Between NO2 and CO2, the former possesses a dipole moment while the later does not. As a result of that, dipole interaction are in operation in NO2 while only dispersion forces are n operation in CO2.
Between CO2 and CS2, the both molecules are nonpolar but CS2 has a greater molecular mass than CO2. Recall that the greater the molecular mass of a substance the greater its magnitude of intermolecular forces.
Taking into account the intermolecular forces, you get that:
The main reason that NH₃ has weaker intermolecular forces than CH₄ is that NH₃, being nonpolar, possesses London Dispersion Forces, while CH₄ possesses the Hydrogen Bonding forces.The main reason that NO₂ has the same intermolecular forces than CO₂ is that in NO₂ and CO₂ there are London forces because they are nonpolar molecules. The main reason that CS₂ has the same intermolecular forces than CO₂ is that CS₂ in CS₂ and CO₂ there are London forces because they are nonpolar molecules.Intermolecular forces or bonds are those interactions that hold molecules together. These are electrostatic forces.
Van der Waals forces are weak attractions that hold electrically neutral molecules together. At some point these molecules present an induced dipole, that is, the molecule acquires a partially positive and a partially negative charge momentarily, causing them to attract each other. They are Van de Waals forces: Dipole - Dipole Forces, London Forces, Ion - Dipole Forces.
London Dispersion Forces: occurs between nonpolar molecules due to the movement of electrons. At some point there are more electrons to one side, which, being close to another atom or molecule, the electrons of the second are repelled, originating two instantaneous dipoles, which originate an attractive force. In summary, this type of force occurs because when two molecules approach, a distortion of the electronic clouds of both is originated, generating in them, transient induced dipoles, due to the movement of the electrons, thus allowing them to interact with each other. They are very weak forces.Ion-ion forces: It is the attraction between two ions of different charges: cations (positively charged ion) and anions (negatively charged ion). That is, it occurs between different charged molecules that will tend to form an electrostatic bond between the ends of opposite charges due to the attraction between them.Ion-dipole forces: these are forces of attraction between an ion (an atom that has lost or gained an electron, so it has a charge) and a polar molecule. A molecule is a dipole when there is an asymmetric distribution of electrons because the molecule is made up of atoms of different electronegativity. The ion then binds to the part of the molecule that has its opposite charge: the positive end of the polar molecule is oriented towards the anion (negatively charged ion) and the negative end of the polar molecule is oriented towards the cation ( positively charged ion).Dipole-dipole forces: dipole-dipole forces are forces of attraction between polar molecules. These molecules attract when the positive end of one of them is close to the negative of the other.Hydrogen bonds: they are a type of dipole-dipole force. In this interaction, a molecule that presents hydrogen interacts with another that presents an atom with high electronegativity, such as oxygen, fluorine or nitrogen (O, F, N). In this way, between the hydrogen, which has a low electronegativity and the electronegative atom, an interaction is established, due to their opposite charges.The relative order of magnitude of the intermolecular forces is:
Ion-ion forces> Ion-dipole forces> Hydrogen bonds> Dipole-dipole forces> London Dispersion Forces
Taking into account all the above, it can be said that:
The main reason that NH₃ has weaker intermolecular forces than CH₄ is that NH₃, being nonpolar, possesses London Dispersion Forces, while CH₄ possesses the Hydrogen Bonding forces.The main reason that NO₂ has the same intermolecular forces than CO₂ is that in NO₂ and CO₂ there are London forces because they are nonpolar molecules. The main reason that CS₂ has the same intermolecular forces than CO₂ is that CS₂ in CS₂ and CO₂ there are London forces because they are nonpolar molecules.Learn more:
https://brainly.com/question/17111432?referrer=searchResultshttps://brainly.com/question/14220340?referrer=searchResultsDescribe the different energy levels of electrons in an atom.
Answers
Answer:
Explanation:
If it is at a higher energy level, it is said to be excited, or any electrons that have higher energy than the ground state are excited. They are then called degenerate energy levels.
What causes thermal pollution in rivers?
1. automobile exhaust
2. nuclear power plants
3. solar radiation
4. factory smokestacks
Answers
Answer:
nuclear power plants .....
Pablo wants to enter the science fair. Which question could be answered through scientific investigation?
Answers
Answer:
Hello
Explanation:
utd847dcpyc08td0
Select the correct answer.
How does the equilibrium change with the removal of hydrogen (H2) gas from this equation?
2H2S ⇌ 2H2(g) + S2(g)
A.
Equilibrium shifts right to produce more product.
B.
Equilibrium shifts left to produce more reactant.
C.
Equilibrium shifts right to produce less product.
D.
Equilibrium shifts left to produce less reactant.
Answers
Answer:
the guy above is wrong
Explanation:
i just did the test and got it wrong
why does the earth experience seasons?
Answers
What is the molarity of .65 L of solution containing 63 grams of NaCl? (dont forget to convert grams to moles)
Answers
Answer:
1.66 M
Explanation:
Molarity = moles/L solution
We have the following data:
mass NaCl = m = 63 g
volume of solution = V = 0.65 L
Thus, we first convert the mass to moles with the molar mass of NaCl (MM):
MM(NaCl) = 23 g/mol Na + 35.4 g/mol Cl = 58.4 g/mol
moles NaCl = m/MM = 63 g/(58.4 g/mol)= 1.08 mol
Finally, we divide the moles into the volume of solution to calculate the molarity:
M = moles NaCl/V = 1.66 mol/L
Construct an explanation for why the physical properties of the inner core, outer core, and lower mantle are essential for the development of Earth's magnetic field.
Answers
Answer:
The hot temperature of inner core and outer core is responsible for the production of magnetic field.
Explanation:
The physical properties of the inner core, outer core, and lower mantle are essential for the development of Earth's magnetic field because the very high temperature of inner core is responsible for the formation of magnetic field. If the inner core is not very hot so the magnetic field will not be generated and our earth's atmosphere will not be save from the solar wind. It can be blown away by the solar wind if this magnetic field is not present so we can conclude that the physical properties of inner core and outer core is important for the production of magnetic field.
please help me this is due very soon
Answers
Answer:
the answer is a because thermal energy is heat and the question said that is not a factor of thermal energy so A does not refer to heat
Help a #QUEEN out PLSSSS!!!
Answers
12. In which equilibrium system will an increase in pressure cause a shift to the left?
A) C + O2(8) + CO2(8)
C) 2 Mg(s) + O2(8) + 2 MgO)
B) CaCO3s) <> CaO + CO2g)
D) 2 H2(g) + O2(g) + 2 H2O)
Answers
D is the answer cause two h20 + o2(g)
In test tube 3, 3 mL of .002 M Fe(III) solution is combined with 7 mL of .02 M 5-sulfosaliclic acid (SSA) solution. What is the mole fraction of SSA in the test tube
Answers
Answer:
0.96
Explanation:
Number of moles of Fe(III) = 3/1000 * 0.002 M = 6 * 10^-6 moles
Number of moles of SSA = 7/1000 * 0.02 = 1.4 * 10^-4 moles
Total number of moles = 6 * 10^-6 moles + 1.4 * 10^-4 moles
Mole fraction of SSA = number of moles of SSA/ total number of moles.
Mole fraction of SSA = 1.4 * 10^-4 moles/ 6 * 10^-6 moles + 1.4 * 10^-4 moles
Mole fraction of SSA = 0.96
infrared in __________controls
I will mark briniest to the one who is correct, also its fill in the blank I wasnt paying attention in school
Answers
Answer:
remote
Explanation:
i hope it helps
if the hydrogen ion concentration [H+] in a solution is 1.87 x 10^-11M what is the [OH-]
Answers
By using pH formula, the concentration of hydroxyl ion [OH-] will be 5.3 ×[tex]10^{-4}[/tex] M.
What is pH?
The pH scale is a measurement of hydrogen ion concentration that is used to determine the acidity as well as alkalinity of a solution.
Calculation of [OH-] by using formula of pH.
Given data:
[H+] = 1.87 x [tex]10^{-11} M[/tex]
[OH-] = ?
Calculation of [OH-] is shown below:
It can be calculated by using the formula:
pH = -log [H+]
Put the value of concentration of hydrogen ion [H+] in above formula.
pH = -log (1.87 x [tex]10^{-11} M[/tex])
pH = -log (1.87) -log ( [tex]10^{-11} M[/tex])
pH = -0.27 +11
pH = 10.73
Now, use the formula, pH +pOH = 14
pOH = 14 - pH
pOH = 14 - 10.73
pOH = 3.27
Now, use formula pOH = -log [OH-]
[OH-] = [tex]10^{-pOH}[/tex]
[OH-] = [tex]10^{-3.27}[/tex]
[OH-] = 5.3 ×[tex]10^{-4}[/tex] M
Therefore, the concentration of hydroxyl ion [OH-] will be 5.3 ×[tex]10^{-4}[/tex] M.
To know more pH
https://brainly.com/question/2288405.
#SPJ2
1. If I have 45 L of He in a balloon at 25 degrees celsius and increase the temperature of the
balloon to 55 degrees celsius, what will the new volume of the balloon be?
Answers
Use Charles' Law: V1/T1 = V2/T2. We assume the pressure and mass of the helium is constant. The units for temperature must be in Kelvin to use this equation (x °C = x + 273.15 K).
We want to solve for the new volume after the temperature is increased from 25 °C (298.15 K) to 55 °C (328.15 K). Since the volume and temperature of a gas at a constant pressure are directly proportional to each other, we should expect the new volume of the balloon to be greater than the initial 45 L.
Rearranging Charles' Law to solve for V2, we get V2 = V1T2/T1.
(45 L)(328.15 K)/(298.15 K) = 49.5 ≈ 50 L (if we're considering sig figs).
A gas is most likely to change the liquid phase in the pressure of the gas
Answers
Answer: if pressure rises in closed vessel and temperature is low enough,
Gas may condense to liquid state
Typically, this happens when we raise the pressure at room temperature, but there are other situations that aren't covered, including lowering the temperature at room pressure.
What is temperature?Temperature is defined as a measurement of an object or substance's warmth or coldness in relation to a standard value. As opposed to extensive characteristics, like mass or volume, temperature is referred to as an intense property—one that is independent of the quantity of matter being considered—along with pressure, density, and other comparable properties.
If the temperature is low enough and pressure rises in a closed vessel, A gas can turn into a liquid form.
Thus, typically, this happens when we raise the pressure at room temperature, but there are other situations that aren't covered, including lowering the temperature at room pressure.
To learn more about temperature, refer to the link below:
https://brainly.com/question/11464844
#SPJ2