Primary lahars occur as a direct result of volcanic activity, such as the sudden melting of snow and ice due to an eruption or the collapse of a volcanic dome or crater.
These lahars are triggered by the release of hot pyroclastic material or lava into the surrounding areas, causing rapid melting of ice and snow or mobilization of loose sediment. Primary lahars can be highly destructive and unpredictable, as they can occur at any time during or after an eruption, even during periods of low volcanic activity.
On the other hand, secondary lahars occur due to the destabilization of loose volcanic material that has been deposited by a previous eruption, and is then remobilized by heavy rainfall or snowmelt. These lahars are triggered by natural processes, rather than volcanic activity, and are typically less powerful than primary lahars. However, they can still be dangerous, especially in areas prone to heavy rainfall or steep terrain, where lahars can quickly gather momentum and cause significant damage to infrastructure and communities.
In summary, primary lahars occur as a direct result of volcanic activity, while secondary lahars are triggered by natural processes, such as heavy rainfall or snowmelt, that destabilize previously deposited volcanic material. Both types of lahars can pose a significant hazard to communities and infrastructure located in the vicinity of volcanic areas, and require careful monitoring and preparedness measures to minimize their impact.
Know more about volcanic activity here:
https://brainly.com/question/15277546
#SPJ11
Which two rock types would you expect to see sitting next to each other after a very long period characterized by only uplift and erosion?
A) metamorphic and sedimentary rocks
B) hard and soft rocks
C) extrusive igneous and intrusive igneous rocks
D) metamorphic and intrusive igneous rocks
A) Metamorphic and sedimentary rocks would be the two rock types you would expect to see sitting next to each other after a very long period characterized by only uplift and erosion.
After a very long period characterized by only uplift and erosion, you would expect to see metamorphic and sedimentary rocks sitting next to each other. Uplift exposes rocks to the surface, where erosion breaks them down into sediments. These sediments are then deposited and eventually form sedimentary rocks.
At the same time, the pressure and heat associated with uplift can cause changes in existing rocks, leading to the formation of metamorphic rocks.
Learn more about erosion here: brainly.com/question/30587260
#SPJ11
The U.S. Geological Survey created the ______ to monitor volcanoes for potential eruptions in volcanically active areas such as California and Yellowstone.
The U.S. Geological Survey created the Volcano Hazards Program to monitor volcanoes for potential eruptions in volcanically active areas such as California and Yellowstone.
The Volcano Hazards Programme was established by the U.S. Geological Survey to monitor volcanoes for prospective eruptions in volcanically active regions including California and Yellowstone.
The VHP monitors volcanoes using a number of methods, such as seismic monitoring, monitoring of gas and ash emissions, analysis of satellite data, and ground-based observations.
With the use of this monitoring, the VHP is able to identify changes in volcanic activity that could be signs of an impending eruption and to alert the public and local authorities as necessary with warnings and advisories.
The program's objective is to lower the risk that volcanic hazards provide to infrastructure and communities through research, information gathering, and dissemination to the general public and emergency management personnel.
For such more question on Volcano:
https://brainly.com/question/30836519
#SPJ11
Using the data given in the text, calculate Venus's angular diameter, as seen by an observer on Earth, when the planet is (a) at its brightest, (b) at greatest elongation, and (c) at the most distant point in its
To calculate Venus's angular diameter, we can use the formula θ = 2arctan(d/2D), where θ is the angular diameter, d is the physical diameter, and D is the distance from Earth to Venus.
According to the text, Venus's physical diameter is 12,104 km and its average distance from Earth is 41 million km.
(a) At its brightest, Venus is at its closest distance to Earth, which is about 38 million km. Plugging these values into the formula, we get θ = 0.65 arcseconds.
(b) At greatest elongation, Venus is at a distance of about 100 million km from Earth. Using the same formula, we get θ = 0.24 arcseconds.
(c) At the most distant point in its orbit, Venus is about 261 million km away from Earth. The formula gives us θ = 0.09 arcseconds.
In summary, Venus's angular diameter varies depending on its distance from Earth. When it's closest to Earth, it appears largest, and when it's farthest away, it appears smallest.
To know more about Venus refer here:
https://brainly.com/question/29566394#
#SPJ11
How do the eruptions that created the Columbia Plateau differ from the eruptions that create large composite volcanoes?
The eruptions that created the Columbia Plateau differ from the eruptions that create large composite volcanoes in several ways: Eruption Style, Magma Composition and Volcano Shape.
There are various ways in which the eruptions that formed the Columbia Plateau are different from those that formed the huge composite volcanoes:
Eruption Style: Lava flows slowly and steadily out of the volcano in effusive eruptions, which are what gave rise to the Columbia Plateau. The magma that created the Columbia Plateau is basaltic in composition, which means that it has a low viscosity and is easily movable. Volcano Shape: The Columbia Plateau is a sizable, somewhat flat region that extends across a number of western US states.For such more question on volcanoes:
https://brainly.com/question/440765
#SPJ11
T/F volcanic danger-assessment maps are valuable tools in protecting human life when volcanic eruption threatens.
True, volcanic danger-assessment maps are valuable tools in protecting human life when volcanic eruption threatens.
These maps provide information on the potential hazards and risks associated with volcanic activity, such as lava flows, ash fall, and pyroclastic flows. They help emergency managers and local authorities to plan for and respond to volcanic events, by identifying areas that are most at risk and implementing appropriate measures to protect people and property.
volcanic, maps- https://brainly.com/question/8536215
#SPJ11
Load factors are applied to loads acting on building to account for which of the following (choose all that apply)
-Approximations in design methodology
Uncertainty in the magnitude and location of applied loads.
-Variation in construction (poor construction)
-Differences in material strength
Load factors are applied to loads acting on a building to account for uncertainty in the magnitude and location of applied loads and variations in construction (poor construction).
These factors are essential in ensuring the safety and stability of a structure, especially considering the unpredictability of natural disasters and other extreme events. Load factors also help to account for approximations in design methodology and differences in material strength, as they provide a margin of safety that compensates for any errors or discrepancies that may arise. In summary, load factors are a critical component of building design and construction, as they help to ensure that buildings are strong, stable, and able to withstand a range of challenging conditions over time.
To learn more about variations, visit:
https://brainly.com/question/1294079
#SPJ11
When an object collides with a moon, the energy that forms the impact crater comes from () energy of the object. The size of the impact crater depends upon the () and () of the object.
The energy that forms the impact crater comes from the Kinetic Energy of the object. When an object collides with a moon, it releases an enormous amount of energy that creates an impact crater.
The size of the impact crater depends upon the mass and velocity of the object. The greater the mass and velocity of the object, the larger the impact crater will be. In detail, the kinetic energy of the object is transformed into heat and shock waves during the collision. This creates a powerful force that excavates the material and forms the crater. Additionally, the angle of impact, the composition of the object, and the surface of the moon can also affect the size and shape of the impact crater. Overall, the formation of impact craters is an important process that has shaped the surface of many celestial bodies in our solar system.
The size of the impact crater depends upon the mass and velocity of the object. Firstly, Understand that the energy responsible for the impact crater is kinetic energy, which is defined as the energy an object possesses due to its motion then Recognize that the size of the impact crater is influenced by the object's mass and velocity. Mass refers to the amount of matter in the object, while velocity is the speed at which the object is travelling in a specific direction.
and finally note that a larger mass or a higher velocity will generally result in a larger impact crater, as more kinetic energy is being transferred during the collision.
To know more about Kinetic Energy visit:
https://brainly.com/question/26472013
#SPJ11
What does an igneous rock with a pyroclastic texture tell a geologist?
An igneous rock with a pyroclastic texture tells a geologist that it was formed through explosive volcanic activity. Pyroclastic texture refers to the fragmented and explosive nature of the volcanic eruption that led to the formation of the rock.
The rock is made up of ash, cinders, and other volcanic debris that were ejected into the atmosphere during the eruption and then settled and solidified into the rock form. This type of igneous rock provides valuable information to geologists about the history of the volcanic activity in the region. For example, the size and distribution of the fragments in the rock can indicate the intensity and duration of the eruption, while the mineral composition of the rock can help identify the source of the magma. Additionally, the presence of pyroclastic textures in a rock can also provide clues about the environmental conditions that existed during the eruption, such as the temperature, pressure, and the presence of water. Overall, studying igneous rocks with pyroclastic textures can help geologists better understand the geological history of a region and the volcanic activity that shaped it.
Learn more about igneous rock here
https://brainly.com/question/18297174
#SPJ11
Subduction zone metamorphism
A. All of the possible answers are correct.
B. is similar to contact metamorphism.
C. forms the metamorphic rock blueschist.
D. involves high temperatures and low pressure.
Subduction zone metamorphism forms the metamorphic rock blueschist. Option C is correct
Subduction zone metamorphism occurs at convergent plate boundaries where one tectonic plate is forced beneath another, resulting in high pressure and low temperature conditions. This type of metamorphism can lead to the formation of blueschist, a blue-colored metamorphic rock that forms under high pressure and low temperature conditions. Therefore, option C is correct. Option A is incorrect as it is too general, while option B and D are incorrect as they do not accurately describe subduction zone metamorphism. Blueschist is a type of metamorphic rock that forms under high-pressure, low-temperature conditions during subduction zone metamorphism. It typically has a blue color due to the presence of the mineral glaucophane, which forms in the presence of high-pressure, low-temperature conditions. Blueschist often forms in subduction zones where oceanic crust is being subducted beneath another plate. The high pressure and low temperature conditions necessary for blueschist formation are typically found at depths of 15 to 30 kilometers within the Earth's crust. Blueschist is an important rock type because it can provide important information about the tectonic history and evolution of an area.
Learn more about metamorphism here:
https://brainly.com/question/1100440
#SPJ11
What does "-zoic" in the eras of the geologic time scale refer to?
A)Water
B)Rock
C)Life
D)Fossilization
C) Life. The term "-zoic" in the eras of the geologic time scale refers to life. The suffix is derived from the Greek word "zoe", which means life. In the context of geology, it is used to denote different time periods characterized by specific types of life forms, rock formations, and fossilization processes.
The "-zoic" in the eras of the geologic time scale refers to life. This suffix is used to indicate a period in Earth's history that is characterized by a particular type of life, such as the Paleozoic era (which is marked by the proliferation of marine life and the emergence of the first land plants and animals) or the Mesozoic era (which is known as the "Age of Dinosaurs"). Fossilization, on the other hand, refers to the process by which organic material is preserved in rock over time, leading to the creation of fossils.
Learn more about Fossilization here: brainly.com/question/31419516
#SPJ11
Which exoplanet orbits closest to its star?A. HD 149026-bB. OGLE-TR-113bC. TrES-1D. HD 209458-bE. XO-1b
Of the five options provided, the exoplanet that orbits closest to its star is HD 209458-b. This exoplanet is also known as Osiris and it orbits a star in the constellation Pegasus.
HD 209458-b is classified as a hot Jupiter, which means it is a gas giant planet that orbits very close to its host star, completing one orbit in just 3.5 Earth days. The distance between HD 209458-b and its star is only about 0.047 astronomical units (AU), which is about 7 million kilometers.
The other four options also orbit very close to their host stars and are also classified as hot Jupiters. HD 149026-b orbits at a distance of about 0.042 AU from its star, OGLE-TR-113b orbits at a distance of about 0.022 AU, TrES-1 orbits at a distance of about 0.039 AU, and XO-1b orbits at a distance of about 0.049 AU. However, HD 209458-b is the closest of these five exoplanets to its host star, making it a particularly interesting object for exoplanet studies.
Learn more about studies here:
https://brainly.com/question/20758569
#SPJ11
About half of the ash produced by Mount St. Helens came from ______, and the other half was the result of ______.
About half of the ash produced by Mount St. Helens came from the vertical blast that occurred on May 18, 1980. This blast sent a plume of ash and gas straight up into the atmosphere, which then fell back down onto the surrounding area as ash.
The other half of the ash was the result of the pyroclastic flows that occurred during the eruption. These flows were composed of hot gas and ash that traveled down the sides of the mountain at high speeds, destroying everything in their path. As they moved, they picked up additional material from the ground, adding to the volume of ash that was ultimately ejected into the atmosphere. The eruption of Mount St. Helens was one of the most significant volcanic events in recent history, and it produced a staggering amount of ash and other materials that impacted the environment and communities in the surrounding area. While the ash from the eruption has largely settled, the effects of the eruption can still be seen in the landscape today, serving as a reminder of the power and unpredictability of natural disasters.
Learn more about Mount St. Helens here
https://brainly.com/question/13620918
#SPJ11
A trough, or downward fold, called a(n) _____ is formed when a rock is deformed through folding.
A trough, or downward fold, called a syncline, is formed when a rock is deformed through folding. This occurs when layers of rock are subject to compressive stress, causing them to bend and buckle.
As the rock layers are forced downward in the center of the fold, a trough or syncline is created. The rock layers on either side of the syncline curve upwards, forming an upward fold or anticline. The shape of the fold is dependent on the amount of stress and the type of rock involved in the deformation.
The formation of synclines and anticlines is an important aspect of structural geology and can provide insight into the history of the rocks and the forces that shaped them.
Learn more about anticline here:
brainly.com/question/2737818
#SPJ11
analyze the sedimentary rocks ni fgi. a6.3.1. below each photograph, describe the rock briefly, using your observations of its apparent composition (what ti is made of), texture (the size, shape, and arrangement of its parts), and anything else you notice that might help you to interpret the rock.
to always consider the context of the rock in terms of its environment and geological history when interpreting your observations.
1. Composition: Observe the rock and determine what materials it is made of. Common components include sand, silt, clay, organic matter, or mineral fragments. 2. Texture: Examine the size, shape, and arrangement of the components within the rock. Consider whether the rock has well-sorted or poorly-sorted particles, the grain size, and if the grains are angular or rounded. 3. Additional Observations: Note any other features of the rock that may help in interpretation, such as color, layering or bedding, presence of fossils, or any unique features that could provide insights into the rock's formation or depositional environment. Remember to always consider the context of the rock in terms of its environment and geological history when interpreting your observations.
Learn more about rock here:https://brainly.com/question/19930528
#SPJ11
Two minerals that are unlikely to coexist in the same igneous rock are what?
Two minerals that are unlikely to coexist in the same igneous rock are quartz and olivine. These minerals have different chemical compositions and form under different temperature and pressure conditions, making their simultaneous presence in a single igneous rock unlikely.
Two minerals that are unlikely to coexist in the same igneous rock are quartz and olivine. This is because quartz typically forms in cooler, more silica-rich environments, while olivine forms in hotter, more magnesium-rich environments. So, in most cases, these two minerals would not be found together in the same igneous rock, as the conditions for their formation are typically mutually exclusive.
Know more about minerals here:
https://brainly.com/question/13770820
#SPJ11
In recent years, global positioning system (GPS) stations and satellites have been used to closely monitor ______ for signs of volcanic activity.
In recent years, global positioning system (GPS) stations and satellites have been used to closely monitor ground deformation for signs of volcanic activity.
GPS stations and satellites have been employed in recent years to carefully monitor ground deformation for indications of volcanic activity.
These instruments can pick up even minute changes in the ground's surface, including elevation or subsidence, which may be a sign of magma movement underground.
In recent years, global positioning system (GPS) stations and satellites have been used to closely monitor ground deformation for signs of volcanic activity.
Scientists can gain a better understanding of a volcano's behaviour and perhaps even forecast an eruption by tracking these changes over time.
For such more question on volcanic:
https://brainly.com/question/1156480
#SPJ11
Answer:
1. drones
2. robots
3. cyber attacks
Explanation:
got it right on edge. 2023
The recorded wind speed during Hurricane Michael exceeded the design wind speed as specified by the AHJ.
True or False
True, The recorded wind speed during Hurricane Michael exceeded the design wind speed as specified by the Authority Having Jurisdiction (AHJ). This indicates that the hurricane was stronger than the anticipated wind speeds used for design and construction purposes in the affected areas.
The AHJ (Authority Having Jurisdiction) sets the minimum wind speed requirements for building design in a particular area. During Hurricane Michael, the recorded wind speed exceeded the specified design wind speed, which means that the buildings and structures in the affected areas may not have been able to withstand the force of the wind. This can lead to significant damage and destruction. Therefore, it is true that the recorded wind speed during Hurricane Michael exceeded the design wind speed as specified by the AHJ.
Learn more about Authority Having Jurisdiction (AHJ): https://brainly.com/question/14521642
#SPJ11
Explain/provide examples of each of the effects of the Columbian Exchange listed
The Columbian Exchange refers to the exchange of plants, animals, diseases, and ideas between the Old World and the New World following Christopher Columbus's first voyage to the Americas in 1492.
The effects of this exchange were widespread and had significant impacts on both the Old and New Worlds. Here are some examples of the effects of the Columbian Exchange: Biological exchange: The exchange of plants and animals had a significant impact on agriculture and food production. For example, maize, potatoes, and tomatoes were introduced to Europe, while horses, cows, and pigs were introduced to the Americas. These new crops and animals greatly increased food production and helped feed growing populations. Disease exchange: The exchange of diseases had a devastating impact on the New World, as the native populations had no immunity to many of the diseases brought by Europeans. Diseases such as smallpox, measles, and influenza killed millions of people in the Americas. In contrast, there were few diseases in the New World that had a significant impact on Europeans.
Cultural exchange: The Columbian Exchange also led to the exchange of ideas, religions, and technologies. For example, Europeans introduced Christianity to the Americas, while Native Americans introduced new methods of agriculture and medicine to Europeans. Environmental change: The introduction of new plants and animals also had a significant impact on the environment. For example, the introduction of cattle and sheep to the Americas led to overgrazing, which contributed to soil erosion and desertification. In Europe, the introduction of American crops such as maize and potatoes led to population growth and urbanization. Overall, the Columbian Exchange had both positive and negative effects on both the Old and New Worlds. While it led to increased food production and the exchange of ideas and technologies, it also had devastating consequences for native populations in the Americas.
Learn more about Exchange here:
https://brainly.com/question/26407800
#SPJ11
How did the fact that Athens was so close to the sea affect its economy?
The fact that Athens was located close to the sea had a significant impact on its economy. Athens became a powerful maritime city-state with a flourishing economy based on sea trade, fishing, and naval power. The proximity to the sea facilitated the transportation of goods, such as olive oil, wine, pottery, and silver, to other parts of Greece and the Mediterranean world, which brought in substantial wealth for the city.
The sea also provided Athens with an abundant supply of fish, which was an important source of protein for its citizens. Fishing became a significant industry, and fish was a staple food in the city. In addition, Athens became a dominant naval power, building a large fleet of warships, which helped the city to establish its dominance over other city-states in the region. The navy also provided protection for Athenian trade ships, which contributed to the growth of Athens' economy. Overall, the proximity of Athens to the sea played a crucial role in the development of its economy, making it a wealthy and powerful city-state in ancient Greece.
Learn more about Mediterranean world here:
https://brainly.com/question/17526045
#SPJ11
What is one theory that explains the cause of ice ages?
Answer:
a chain reaction of positive feedbacks triggered by periodic changes in the Earth's orbit around the sun
Explanation:
In general, it is felt that ice ages are caused by a chain reaction of positive feedback triggered by periodic changes in the Earth's orbit around the Sun. These feedbacks, involving the spread of ice and the release of greenhouse gases, work in reverse to warm the Earth up again when the orbital cycle shifts back.
How many species of animals live in Mammoth Cave?
it is estimated that there are over 130 species of animals that live in the cave, including a variety of insects, bats, and other small animals.
Mammoth Cave is home to a diverse range of animal species, including over 130 different species of animals such as bats, cave fish, spiders, beetles, crickets, salamanders, and others. Some of the species that are found in the cave are unique to this specific ecosystem, and have evolved specific adaptations to living in the dark and nutrient-poor environment of the cave. The cave is also home to several endangered species, including the Indiana bat and the Kentucky cave shrimp.
Learn more about Mammoth here:https://brainly.com/question/24163999
#SPJ11
What characteristics or markers identifies and unifies those regions you just listed?
Some characteristics or markers that can be used to identify regions are:
Physical featuresPolitical boundariesPopulation distributionHow can regions be identified ?The terrain of a map can determine its regional breakdown, categorized by natural elements like mountains, rivers, lakes, and coastlines. These features tend to serve as significant markers that shape the regional scope.
Geographical divisions determined by political entities such as countries, states, or administrative districts are frequent on maps. The criteria for these boundaries could stem from cultural or historical background amongst others.
Regions dependent on population density or distribution are another way maps may be segregated. Examples include regions based on urbanisation levels, proximity to densely populated spaces, or focusing on rural areas.
Find out more on regions at https://brainly.com/question/18300719
#SPJ1
which of following rock types does NOT involve dissolved gas in the magma?
a. tuff
b. pumice
c. scoria
d. diorite
e. vesicular basalt
The rock type that does NOT involve dissolved gas in the magma is diorite (option d). Diorite is an intrusive igneous rock that is formed from the slow cooling
solidification of magma deep underground. Unlike volcanic rocks such as tuff, pumice, scoria, and vesicular basalt,
It forms from the slow cooling and solidification of magma deep within the Earth's crust. Unlike the other rock types listed in the question, diorite does not involve dissolved gas in the magma. Tuff, pumice, scoria, and vesicular basalt are all formed from volcanic activity, which involves the rapid cooling and solidification of magma that has dissolved gas (usually water vapor) in it. As the magma rises to the surface and encounters lower pressure, the dissolved gas comes out of solution and forms bubbles, creating a porous or vesicular texture in the resulting rock.
Learn more about solidification here:
https://brainly.com/question/21278640
#SPJ11
Famine is one example of how volcanoes can have a(n) ___ effect on humans, by lowering agricultural production and killing livestock that humans depend upon for survival.
Volcanoes have the potential to cause devastating effects on humans, including famine. This is because volcanic eruptions can release ash and other materials that can damage crops and decrease agricultural production.
In addition, volcanic ash can contaminate water sources and cause illness in livestock, leading to the death of animals that humans rely on for food and other resources.The impact of a volcanic eruption on agriculture and livestock can be severe, especially in developing countries where these resources are crucial for survival. However, with proper preparedness and response measures, the impact of volcanic eruptions on agricultural and livestock systems can be mitigated. This includes developing strategies for protecting crops and animals, improving communication systems for early warning of potential eruptions, and ensuring that emergency food and water supplies are available in affected areas. Ultimately, a comprehensive approach to disaster management that includes consideration of the impacts of volcanic activity on agricultural and livestock systems can help to reduce the human impact of these events.
Learn more about humans here
https://brainly.com/question/24067944
#SPJ11
Rock salt is an example of a(n) __________, deposited by saturation and precipitation in evaporating water.
A)biochemical
B)evaporite
C) detrital sedimentary rock
D)limestone
E)chert
The answer to the question is B) evaporite. Rock salt is an example of an evaporite, which is a type of sedimentary rock that forms when dissolved minerals in water precipitate due to the evaporation of water.
Rock salt is a type of evaporite that forms through the process of saturation and precipitation in evaporating water. A more detailed answer would explain that evaporites are a type of sedimentary rock that form when mineral-rich solutions (such as saltwater) evaporate and leave behind the minerals they were carrying. Common types of evaporites include rock salt (halite), gypsum, and anhydrite. These rocks often form in arid or semi-arid environments where evaporation rates are high and there is a ready supply of mineral-rich water.
Learn more about Rock salt: https://brainly.com/question/9259374
#SPJ11
the process of abrasion, where rock and smaller sized sediment at the glacier's base scrapes at underlying bedrock, may lead to glacial _________
The process of abrasion, where rock and smaller sized sediment at the glacier's base scrapes at underlying bedrock, may lead to glacial erosion.
This is because the constant scraping and grinding of the glacier against the bedrock can slowly wear it down, carving out valleys, fjords, and other landforms in the process.
As the glacier moves forward, it can pick up and transport large amounts of sediment, further contributing to erosion.
Additionally, the meltwater that flows from the glacier can also cause erosion as it carries sediment and debris away from the glacier and deposits it elsewhere.
Overall, abrasion plays a significant role in shaping the landscapes of areas where glaciers are present, and its effects can be seen in the unique and dramatic landforms that are created through glacial erosion.
To know more about glacial erosion refer here:
https://brainly.com/question/13053372#
#SPJ11
The eruption of Mt. St. Helens in 1980
A. was triggered by a landslide on its northern flank.
B. produced lava flows that traveled at the speed of sound and flattened forests.
C. occurred without warning, killing 60 people.
D. was the largest volcanic eruption ever recorded.
The eruption of Mt. St. Helens in 1980 was triggered by a landslide on its northern flank. Option A is correct.
On May 18, 1980, a massive landslide on the northern flank of Mount St. Helens caused a violent eruption, sending a plume of ash and gas more than 15 miles into the atmosphere. The landslide was triggered by an earthquake that caused the north face of the mountain to collapse, which in turn released a massive explosion of hot gas, ash, and rock. The eruption of Mt. St. Helens was one of the most destructive volcanic events in U.S. history, causing widespread devastation to the surrounding area and killing 57 people. While the eruption did produce pyroclastic flows, which are fast-moving clouds of hot gas and ash that can flatten forests, they did not travel at the speed of sound. The eruption was also not the largest volcanic eruption ever recorded.
Learn more about flank here:
https://brainly.com/question/28586842
#SPJ11
How will foliation in continental metamorphic rocks formed during subduction be oriented?
A) perpendicular to the direction of plate movement
B) parallel to the direction of plate movement
C) oblique to the direction of plate movement
B) parallel to the direction of plate movement.
In the case of foliation in continental metamorphic rocks formed during subduction, the orientation will be:
Foliation is a term used to describe the alignment of minerals in metamorphic rocks, and it typically forms perpendicular to the direction of the maximum compressional stress applied during metamorphism. In subduction zones, the compressional stress is related to the movement of tectonic plates. Thus, the foliation will be oriented perpendicular to the direction of plate movement.
Foliation forms in metamorphic rocks when minerals are reoriented or recrystallized under directed pressure and high temperature. As pressure is applied, minerals with a platy or elongated shape, such as micas and amphiboles, align themselves perpendicular to the direction of maximum stress.
This creates a parallel arrangement of minerals, giving the rock a banded or layered appearance. The orientation of foliation can help determine the direction of applied stress during rock formation, as it is typically perpendicular to the direction of maximum stress.
Learn more about :
Foliation : brainly.com/question/31323478
#SPJ11
Repeat LIDAR surveys can be used to document the effect of hurricanes on barrier islands because ___________.
1. Erosion can be measured
2. Houses can be located
3. Sedimentation can be measured
Repeat LIDAR surveys can be used to document the effect of hurricanes on barrier islands because they enable the measurement of erosion and sedimentation. The correct option is 1 and 3.
By conducting LIDAR surveys before and after a hurricane, scientists can assess the extent of erosion by comparing the changes in the topography of the island.
This allows them to determine the areas most affected by the hurricane and the magnitude of the erosion. Similarly, sedimentation can be measured by observing the deposition of sediments in different locations on the island.
These measurements help to understand the overall impact of hurricanes on barrier islands and inform strategies for their preservation. Although LIDAR can also be used to locate houses, this aspect is less relevant to documenting the effects of hurricanes on the islands themselves.
To know more about hurricanes refer here:
https://brainly.com/question/23906921#
#SPJ11
Which of these factors may significantly influence atmospheric temperature changes?
A. concentration of greenhouse gases,B. variations in solar radiance, C. amount of aerosis in the atmosphere, E. Earth's orbital and tilt variations
All of the factors listed (A, B, C, and E) can significantly influence atmospheric temperature changes.
A. Greenhouse gas concentration: The number of greenhouse gases, such as carbon dioxide, methane, and water vapor, in the atmosphere can trap heat and promote the greenhouse effect, raising atmospheric temperatures.
B. Solar radiation fluctuations: Changes in the amount of solar energy that enters the Earth's atmosphere, such as variations in solar radiation brought on by sunspot cycles or modifications in solar activity, can have an effect on atmospheric temperatures.
C. The number of aerosols in the atmosphere: Both natural and man-made processes can release aerosols into the atmosphere, such as sulfate and fine particulate matter. By diffusing and absorbing sunlight, these aerosols can alter the Earth's energy balance, which can have an impact on atmospheric temperatures.
E. Earth's orbital and tilt variations: Long-term changes in the Earth's orbital and tilt variations, such as Milankovitch cycles, can affect how much sunlight is received by various portions of the planet and how intensely it does so, which in turn can affect atmospheric temperatures.
All of these elements are crucial climate change drivers and have a big impact on how the atmosphere's temperature varies in various time frames, from short-term fluctuations to long-term trends.
To know more about the effects of atmospheric temperature changes:
https://brainly.com/question/2345783
The answer is ALL OF THESE (E)
The factors that may significantly influence atmospheric temperature changes include:
A. Concentration of greenhouse gases
B. Variations in solar radiance
C. Amount of aerosols in the atmosphere
D. Earth's orbital and tilt variations
All of these factors can have a significant impact on atmospheric temperature by either trapping heat, affecting the amount of sunlight reaching the Earth's surface, or altering the distribution of solar energy across the planet.