problem 2 we consider to compare two results: lagrange form of interpolation polynomial and the newton form of the interpolating polynomial of degree 3 that satis es the following: p(0)

The average speed of the buses is approximately 19.08 miles per hour.

We have,

If the trip takes 3 hours and 15 minutes of driving time, that's a total of 3.25 hours.

The distance traveled is 124 miles round trip, so the distance traveled in one direction is half of that or 62 miles.

To find the average speed of the buses in miles per hour, we can use the formula:

average speed = distance/time

where distance is in miles and time is in hours.

So, the average speed of the buses in miles per hour is:

Average speed

= 62 miles / 3.25 hours

= 19.0769 miles per hour (rounded to 4 decimal places)

Therefore,

The average speed of the buses is approximately 19.08 miles per hour.

Learn more about speed here:

https://brainly.com/question/7359669

#SPJ1

Of course! I'm here to help. Please provide me with the details or information you need assistance with regarding Pete, the skateboarding penguin and the right triangular prism ramp. I'll do my best to provide you with prompt and accurate help.

Answer:

Please mark me the brainliest

Step-by-step explanation:

To solve the equation (6 – 2x)(3 – 2x)x = 40, we can start by simplifying the left-hand side:

(6 – 2x)(3 – 2x)x = 40

(18x – 12x^2 – 6x + 4x^2)x = 40

(2x^3 – 8x^2 + 18x)x = 40

2x^4 – 8x^3 + 18x^2 = 40

2x^4 – 8x^3 + 18x^2 – 40 = 0

We can try to factor this equation by grouping terms:

2x^4 – 8x^3 + 18x^2 – 40 = 0

2(x^4 – 4x^3 + 9x^2 – 20) = 0

2((x^2 – 2x + 1)(x^2 – 2x – 20)) = 0

2(x – 1)^2(x – 5)(x + 4) = 0

Therefore, the real solutions of the equation are x = 1 (with multiplicity 2), x = 5, and x = -4.

Now, to answer the question, we need to determine whether it is possible to cut squares with sides of 3/2 in. to make a box. We can use the value of x = 3/2 to find the dimensions of the box:

length = 6 – 2x = 6 – 2(3/2) = 3 in.

width = 3 – 2x = 3 – 2(3/2) = 0 in.

height = x = 3/2 in.

Since the width is 0, it is not possible to cut squares with sides of 3/2 in. to make a box. Therefore, the correct answer is:

No. It is not possible to cut squares of this size.

The solution of the quadratic equation, 40 = x² - 3x is x = 8 or x = -5.

Quadratic equation can be represented as follows:

ax²+ bx + c

where

Therefore, let's solve the quadratic equation as follows:

40 = x² - 3x

Hence,

x² - 3x - 40 = 0

x² + 5x - 8x - 40 = 0

x(x + 5) - 8(x + 5) = 0

(x - 8)(x + 5) = 0

x = 8 or x = -5

learn more on equation here: https://brainly.com/question/29276474

#SPJ1

Answer: m∠1=76.5

Step-by-step explanation:

x+y/2

71+82/2

153/2

76.5

Hope this helps! :)

The postfix expression for the given infix expression is "A B C * + D +".

To convert the infix expression "A+B*C+D" to postfix expression using a stack, we can follow these steps:

Create an empty stack and an empty output queue.

Process each symbol in the infix expression from left to right.

If the symbol is an operand (e.g. A, B, C, D), add it to the output queue.

If the symbol is an operator (e.g. +, *), then do the following:

a. While the stack is not empty and the top of the stack has greater precedence than or equal precedence to the current operator, pop the top of the stack and add it to the output queue.

b. Push the current operator onto the stack.

After processing all the symbols in the infix expression, pop any remaining operators from the stack and add them to the output queue.

Using this algorithm, we can convert the infix expression "A+B*C+D" to postfix expression as follows:

Symbol: A + B * C + D

Action: Push A Push + Push B Push * Push C Pop * Pop + Push D

Output: A B C * + D +

Therefore, the postfix expression for the given infix expression is "A B C * + D +".

To learn more about processing  visit:

https://brainly.com/question/29487063

#SPJ11

Answer: Geometry is a branch of mathematics that deals with the study of shapes, sizes, positions, and measurements of objects in two-dimensional and three-dimensional spaces. It involves analyzing and calculating angles, lengths, areas, volumes, and other properties of various figures such as triangles, circles, squares, cubes, and spheres. Geometry is used in many fields including architecture, engineering, physics, and computer graphics.

The president of Doerman Distributors, Inc., believes that 27% of the firm's orders come from first-time cu:

sample of 100 orders will be used to estimate the proportion of first-time customers. Use z-table.

0.30. What is the sampling distribution of p for this study?

a. Assume that the president is correct and p

=

Hint(s) Che

A normal distribution because np and n(1-p) are both greater than 5 v

b. What is the probability that the sample proportion will be between 0.20 and 0.40 (to 4 decimals)?

c. What is the probability that the sample proportion will be between 0.25 and 0.35 (to 4 decimals)?

Hide Feedback

Partially Correct

Answer:

Step-by-step explanation:

Please mark me the brainliest

a. Since the sample size is large enough (n=100) and the expected number of first-time customers (np=27) and the expected number of repeating customers (n(1-p)=73) are both greater than 5, we can assume that the sampling distribution of the sample proportion p is approximately normal with mean μ=p=0.27 and standard deviation σ=sqrt[p(1-p)/n]=sqrt[(0.27)(0.73)/100]=0.046.

b. To find the probability that the sample proportion will be between 0.20 and 0.40, we need to standardize the values using the formula z = (x - μ) / σ, where x is the sample proportion, μ is the population proportion, and σ is the standard deviation of the sampling distribution of p. Then we can use a standard normal distribution table (z-table) to find the corresponding probabilities.

z(0.20) = (0.20 - 0.27) / 0.046 = -1.52

z(0.40) = (0.40 - 0.27) / 0.046 = 2.83

Using the z-table, the probability of getting a z-score between -1.52 and 2.83 is approximately 0.9747. Therefore, the probability that the sample proportion will be between 0.20 and 0.40 is 0.9747 (to 4 decimals).

c. To find the probability that the sample proportion will be between 0.25 and 0.35, we can follow the same steps as in part b:

z(0.25) = (0.25 - 0.27) / 0.046 = -0.43

z(0.35) = (0.35 - 0.27) / 0.046 = 1.74

Using the z-table, the probability of getting a z-score between -0.43 and 1.74 is approximately 0.5267. Therefore, the probability that the sample proportion will be between 0.25 and 0.35 is 0.5267 (to 4 decimals).

Answer:48 yd2

Step-by-step explanation:

The area of the yard that William would have to mow would be C. 112 yards ²

To find the area to be mowed, find the area of the entire yard including the porch, and then the area of the porch, and then subtract the area of the porch.

Area of yard :

= 12 x 12

= 144 yard ²

The area of the porch is:

= ( 12 - 8 ) x ( 12 - 4 )

= 4 x 8

= 32 yards ²

The area to be mowed is:

= 144 - 32

= 112 yards ²

Find out more on area at https://brainly.com/question/20882229

#SPJ1

The number of smaller triangles used to fill the larger triangle is given as follows:

1024 triangles.

The perimeter of the larger triangle is 32 times larger than the perimeter of one of the smaller triangles, which means that the ratio of the areas is given as follows:

32² = 1024.

The ratio of the areas is obtained squared as the perimeter is measured in units, while the area is measured in units squared.

This means that 1024 smaller triangles are needed to fill the larger triangle.

More can be learned about the ratio between areas at https://brainly.com/question/12024093

#SPJ1

The point that could be the location of the other end of the wall will be (0, 5).

By using one or more elements or coordinates, a reference frame can properly pinpoint location alongside other mathematical components on such space, including Euclidean space.

A point or object in a two-dimensional plane can be found by utilizing its coordinates, which appear to be sets of integers. The y and x vectors can be used to identify the position of a point on a double surface. a group of photos used to identify certain areas.

In conclusion, the point that could be the location of the other end of the wall will be (0, 5).

Learn more about point on

https://brainly.com/question/22156316

#SPJ1

Answer: 2/3 or 12/18

Step-by-step explanation:

The interval that contains the median temperature is 70-79 in the frequency table showing the observed high temperatures in Buffalo.

First, we need to calculate the total number of observations, which is 5+12+9+5=31.

The median is the middle value of the data set when arranged in ascending or descending order. Since there are 31 observations, the median will be the 16th value.

To determine which interval contains the median temperature, we need to calculate the cumulative frequency of each interval. The cumulative frequency for the first interval is 5, for the second interval it is 5+12=17, for the third interval it is 17+9=26, and for the fourth interval it is 26+5=31.

Since the median is the 16th value, it lies within the third interval, which is 70-79.

Learn more about the median at

https://brainly.com/question/16631452

#SPJ4

The question is -

The following frequency table shows the observed high temperatures in Buffalo, New York, in May 2007. Which interval contains the median temperature?

temperature                     frequency

50-59                                 5

60-69                                 12

70-79                                  9

80-89                                 5

Note that the coordinates of V after it has been reflected over the x-axis will be: V' (3, -5)

The coordinates given are

V (3, 5)

W(5,8)

X (9, 6)

y (3, 3)

When point is reflected over the x- ais, it's y - coordinate takes on a polarized sign that is it goes from positive to negative of vice versa while the x-cordinte remains the same

So after the image on point v hs been reflected, the new coordinates for V = V' = (3, -5)

Learn more about reflection:
https://brainly.com/question/29093485
#SPJ1

The equation of the line written in general form (4,5) (1,2) is y - x = 1.

The formula to find the line equation from two points is as follows -

(y - [tex] y_{1}[/tex])/(x - [tex] x_{1}[/tex]) = ([tex] y_{2}[/tex] - [tex] y_{1}[/tex])/([tex] x_{2}[/tex] - [tex] x_{1}[/tex]). In the formula, [tex] y_{1}[/tex] and [tex] y_{2}[/tex] are initial and final y-axis values and [tex] x_{1}[/tex] and [tex] x_{2}[/tex] are initial and final x-axis values.

Keep the values in formula to find the equation -

(y - 5)/(x - 4) = (2 - 5)/(1 - 4)

Simplifying the equation

(y - 5)/(x - 4) = -3/-3

Divide the values

(y - 5)/(x - 4) = 1

Rewriting the equation

(y - 5) = (x - 4)

Rearranging the equation

y - x = 5 - 4

y - x = 1

Hence, the equation of line is y - x = 1.

Learn more about line equation -

https://brainly.com/question/18831322

#SPJ4

Answer:

64.141 cm ^2

Step-by-step explanation:

Formula for solving this is Pi(7^2) (170/360)

170 being the angle in degrees.

The probability that the average amount of data used in this sample was greater than 632 megabytes is approximately 0.1922 or 19.22%.

a. The mean of the sample mean (my) can be calculated using the formula:

my = population mean = 606 megabytes per month

b. The standard deviation (standard error) of the sample mean can be calculated using the formula:
standard error = [tex]\frac{standard deviation}{\sqrt{sample size} }[/tex]
standard error = [tex]\frac{240}{\sqrt{64} }[/tex]
standard error = 30

Therefore, the standard error of the sample mean is 30 megabytes per month.

c. To find the probability that the average amount of data used in this sample was greater than 632 megabytes, we need to use the formula for the z-score:
z = [tex]\frac{(x - my) }{standard error}[/tex]
where x is the sample mean, my is the population mean, and standard error is the standard error of the sample mean.
z = [tex]\frac{(632 - 606) }{30}[/tex]
z = 0.87

Using a z-table or calculator, we can find that the probability of getting a z-score of 0.87 or higher is 0.1922. Therefore, the probability that the average amount of data used in this sample was greater than 632 megabytes is approximately 0.1922 or 19.22%.

To know more about the z-score visit:

https://brainly.com/question/31613365

#SPJ11

Answer:

√(4.93 × 17.1) is about √(5 × 20) = √100 = 10. 0.209 is about 0.2, or 1/5.

So we have 10/0.2 = 100/2 = 50.

The table showing the exponential function is completed and presented below  

x      y

0    96

1    192

2   384

3   768

The expression for the table is given as

y = a * b^x,

Point (0, 96) is on the table.

a = 96,

when b = 2, we have that

for x = 1

y = 96 x 2^x = 96 x 2^1 = 192

for x = 2

y = 96 x 2^x = 96 x 2^2 = 384

for x = 3

y = 96 x 2^x = 96 x 2^3 = 768

Therefore, The required exponential function will be  

x      y

0    96

1    192

2   384

3   768

Learn more about exponential function at

https://brainly.com/question/2456547

#SPJ1

The true population proportion and the sample proportion, given the confidence level and sample size.

In statistics, P-hat represents the sample proportion and E represents the margin of error.

Given a confidence interval of (0.444, 0.484), we can find P-hat and E as follows:

P-hat = (lower limit + upper limit) / 2

P-hat = (0.444 + 0.484) / 2

P-hat = 0.464

Therefore, the sample proportion (P-hat) is 0.464.

To find E (the margin of error), we need to use the formula:

E = (upper limit - lower limit) / 2

E = (0.484 - 0.444) / 2

E = 0.02

Therefore, the margin of error (E) is 0.02.

Note that the margin of error indicates the maximum likely difference between the true population proportion and the sample proportion, given the confidence level and sample size.

To learn more about confidence visit:

https://brainly.com/question/13067956

#SPJ11

The dimension available for the design is the lateral surface area of the can, which is approximately 251.33 square centimeters.

The area between the bases of the can is the lateral surface area of the can, which can be calculated using the formula:

Lateral surface area = 2 x π x r x h

where π is the mathematical constant pi (approximately 3.14159), r is the radius of the can (which is half of the diameter), and h is the height of the can.

In this case, the height of the can is given as 9.4 centimeters, and the diameter (and hence the radius) is given as 8.5/2 = 4.25 centimeters.

Plugging in these values, we get:

Lateral surface area = 2 x π x 4.25 cm x 9.4 cm

= 251.327 square centimeters

Therefore, the dimension available for the design is the lateral surface area of the can, which is approximately 251.33 square centimeters.

To learn more about dimension, click here:

https://brainly.com/question/29581656

#SPJ11

1. The quadratic regression model is [tex]Y = b0 + b1X + b2X^2[/tex] . The regression coefficient b2 represents the rate of change in muscle mass with respect to age squared. 2. The quadratic term can not be dropped from the regression model, since the calculated F-value is less than the critical value. 3. The fitted regression function in terms of the original variable X is [tex]Y = 87.017 + 0.241X - 0.002X^2[/tex].

To determine the quadratic regression model follow these steps:

1. Using R program, the quadratic regression model:

[tex]Y = b0 + b1X + b2X^2[/tex]

where Y is the muscle mass, X is the age.

The regression coefficients are:

b0 = 283.962

b1 = -14.501

b2 = 0.162

The regression coefficient b2 (quadratic term) represents the rate of change in muscle mass with respect to age squared. It measures the acceleration or deceleration of the change in muscle mass as the age increases.

2. Using the F-test.

[tex]F = [SSR(x,x^2) - SSR(x)] / [(k - 1) * MSE][/tex]

where k = number of coefficients = 3 (b0, b1, b2).

MSE = Mean Squared Error = 47.086

[tex]SSR(x,x^2), SSR(x) =[/tex] Sum of Squares due to Regression with both X and [tex]X^2[/tex]  as predictors = 230.74, due to Regression with only X as predictor = 135.03

Therefore,

[tex]F = [230.74 - 135.03] / [(3 - 1) * 47.086] = 2.214[/tex]

Using a significance level the critical value for F-test is 5.143.

Since the calculated F-value (2.214) is less than the critical value (5.143), we fail to reject the null hypothesis. Therefore, there is not enough evidence that quadratic term can be dropped from regression model.

3. The fitted regression function in terms of the original variables:

[tex]Y = 87.017 + 0.241X - 0.002X^2[/tex]

where X is the age and Y is the measure of muscle mass.

Know more about regression model here:

https://brainly.com/question/29657622

#SPJ11

The 80% confidence interval for the mean waste recycled per person per day for the population of Montana is given as follows:

(1.9, 2.3).

The t-distribution is used when the standard deviation for the population is not known, and the bounds of the confidence interval are given according to the following rule:

[tex]\overline{x} \pm t\frac{s}{\sqrt{n}}[/tex]

In which the variables of the equation are presented as follows:

The critical value, using a t-distribution calculator, for a two-tailed 80% confidence interval, with 18 - 1 = 17 df, is t = 1.33.

The parameters are given as follows:

[tex]\overline{x} = 2.1, s = 0.74, n = 18[/tex]

The lower bound of the interval is given as follows:

2.1 - 1.33 x 0.74/sqrt(18) = 1.9.

The upper bound of the interval is given as follows:

2.1 + 1.33 x 0.74/sqrt(18) = 2.3.

More can be learned about the t-distribution at https://brainly.com/question/17469144

#SPJ1

Answer:

Stem | Leaf

1| 9

2| 5 9

3| 0 3 3 8

4| 0 7 9

5| 4 5

6| 1 5

7| 2 7

8| 1

Step-by-step explanation:

Minimum: 19

Maximum: 81

Range: 62

Count: 17

Sum: 808

Mean: 47.53

Median: 47

Mode: 33

Standard Deviation: 18.9

Variance: 357.3

From the addition arithematic operation, the total number of sold computers by Mr victor is equals to ninty-three out of hundard computers .

Addition, subtraction, multiplication, and division are four basic arithmetic operations used in mathematics.

Total number of computers Mr victor has

= 100

Number of computers sold by him in morning = w

Number of computers sold by him in afternoon = 2w + 3

Number of computers left after selling = 7

We have to determine the number of computers he had to sell. We have total counts of computers so we equate all sold and unsold computers to total and will determine value of variable w. Using addition, w + 2w + 3 + 7 = 100

Simplify, 3w + 10 = 100

=> 3w = 90

Dividing by 3 both sides,

=> w = 30

So, Number of computers sold in morning = 30

Number of computers sold in afternoon = 2×30 + 3 = 63

So, total sold computers = 63 + 30 = 93.

Hence, required value is 93.

For more information about addition operation, visit :

https://brainly.com/question/21688446

#SPJ4

Descriptive statistics is a branch of statistics that deals with the collection, analysis, interpretation, and presentation of data. It focuses on summarizing and describing the characteristics of a sample or population. The purpose of descriptive statistics is to provide a clear and concise summary of the data, including measures of central tendency, variability, and distribution.

True,This information can be used to make inferences about the population as a whole. Therefore, descriptive statistics helps statisticians to better understand and interpret the population data.

False, Descriptive statistics is a branch of statistics that focuses on summarizing and organizing data from a sample or population. It provides insights into the basic features of the data, such as the mean, median, and standard deviation, but does not make inferences about the population.

To learn more about statistics : brainly.com/question/31577270

#SPJ11

i) Based on exponential growth, Xavier's salary in 2015 is £44,274.

ii) The year that Xavier's salary first became greater than £47,500 would be 2019.

Exponential functions show the relationship between two variables and a variable exponent with a periodic constant rate of growth or decay in the value of something

Annual increase in Xavier's salary = 2% or 0.02

Xavier's salary in 2010 = £40,100

The number of years between 2015 and 2010 = 5 years

i) y = £40,100(1.02)^5

= £44,273.64

= £44,274

ii) £47,500 = £40,100(1.02)^t

t = 9 years

= 2019 (2010 + 9)

Learn more about exponential functions at https://brainly.com/question/30241796.

#SPJ1

A)  The demand function is [tex]y = 500 - 20x[/tex]

B) The revenue function [tex]R(x) = 500x - 20x^2[/tex]

C) The marginal revenue [tex]MR(x) = 500 - 40x[/tex]

D) This means that the store can maximize its revenue by setting the price at $25

E) The price corresponding to the value found in part d) is $25

To determine the demand function, we need to use the information given in the problem that for each $1.50 decrease in price, sales will increase by 5 travel mugs. Let x be the price in dollars and y be the number of travel mugs sold.

A) Then, we can write the demand function as:

[tex]y = 140 + 5((24-x)/1.5)[/tex]

Simplifying this expression, we get:

[tex]y = 140 + 20(16 - x)[/tex]

[tex]y = 500 - 20x[/tex]

Therefore, the demand function is[tex]y = 500 - 20x.[/tex]

B) The revenue function is given by the product of the price and the quantity sold:

[tex]R(x) = x(500 - 20x)[/tex]

[tex]R(x) = 500x - 20x^2[/tex]

C) The marginal revenue is the derivative of the revenue function with respect to x:

[tex]MR(x) = dR/dx[/tex]

[tex]= 500 - 40x[/tex]

D) To solve for R(x) = 0, we need to set the revenue function equal to zero and solve for x:

[tex]500x - 20x^2 = 0[/tex]

[tex]x(500 - 20x) = 0[/tex]

[tex]x = 0[/tex] or [tex]x = 25[/tex]

Since the price cannot be zero, the store can only set the price at $25 to achieve zero revenue. This means that the store can maximize its revenue by setting the price at $25.

E) The price corresponding to the value found in part d) is $25.

To learn more about demand function visit:

https://brainly.com/question/31153824

#SPJ4