Answer:
Value of Q when W = 288 is 192
Explanation:
Given that;
q varies as w [Using ratio property]
Given that value of q = 24
And value of w = 36
Find:
Value of Q when W = 288
Computation:
If Q varies as W
So their ratio must be same
So, using ratio property for find factor
q / w = Q / W
24 / 36 = Q / 288
Q = [24 x 288] / 36
Q = 6,912 / 36
Value of Q when W = 288 is 192
Calculate the force of an object that has a mass of 10kg and an acceleration of 4m/s²
A-40N
B-8N
C-2.5N
D-0.4N
My best friend just returned from the clinic. She just found out she is HIV- positive. She invited me for dinner. What should I do? Should I go? What do I say to her and her family? Can I eat the foods she cooked or touched? Will she be all right? Imagine this letter is from a friend. Write a page response. Include reasons for your advice.
Answer:
yes, because you dont want to be mean and make her feel worse about it and hiv has something do with s3x not germs so yes go
Explanation:
The frequency, or pitch, of a musical note varies inversely with
the wavelength. The speed of sound, 340.2 meters per second, is
the constant of variation.
An "A" note in octave 3, has a frequency of 220 Hertz. What is the
wavelength of the sound made by the tuner in meters?
Answer:
0.647 meters
Explanation:
i did the quiz
Why is Alternating Current important
Explanation:
La corriente alterna es de gran importancia, entre otras cosas, porque nos proporciona la red eléctrica domiciliaria. Es aquella con la cual funcionan habitualmente los transformadores y un gran número de dispositivos.
Which wave has the longest wavelength?
A. A
B. B
C. C
D.D
Answer:
In my opinion, ''A" would be the longest wavelength.
Pls Help Me with this problem
Answer:
explanation
Explanation:
1 = C
2 = A
3 = D
4 = E
5 = B
Linda, a biker, is moving along a circular path at a constant speed of 10 km/h. In a neighboring arena Kevin, another biker, is moving along a circular path at a constant speed of 12 km/h. If the acceleration of the two bikers is the same, what can you infer?
A) The centripetal force on Kevin is higher than that on Linda.
B) The centripetal force on Linda is higher than that on Kevin.
C) Kevin’s circular path has a bigger radius than Linda’s path.
D) Linda’s circular path has a bigger radius than Kevin’s path
Answer:
the answer is C
Explanation:
i took the test just now so i am glad i can help someone in the future❣❣❣❣
Also here is the explanation
Note that the magnitude of acceleration (a) is given by a =
v2
R
, where v is the speed and R is the radius. Because acceleration is the same for both bikers, the ratio 
v2
R
, also has to be the same for both. Given that Kevin’s speed is higher, the radius of his path must also be higher to maintain the same ratio. Therefore, Kevin’s circular path has a bigger radius than Linda’s path.
According to Kepler's second law at the two shaded areas above are equal then...
A. it takes the same amount of time for planet A to travel between T1 and T2 as it does to travel between T3 and T4
B. Planet A will cause an eclipse on Planet B during those time intervals
C. it takes Planet A more time to travel between T1 and T2 as it does to travel between T3 and T4
D. it takes Planet A less time to travel between T1 and T2 as it does to travel between T3 and T4
Answer:
A. Kepler's second law says that the radius vector sweeps equal areas in equal times.
list some application of atmospheric pressure?
Answer:
Drinking straw, syringe, Dropper, vacuum, etc.
Explanation:
What is another example of convection
Answer:
boiling water - When water heats, the heat from the burner is transferred to the container, heating the water at the bottom. This hot water rises, creating a circular motion, as colder water descends to replace it.
Jill doubled the force acting on an object, yet she kept the acceleration constant or unchanged.
How did she do this?
Answer:
Mass doubles
Explanation:
Since F = ma, and given that the acceleration stayed constant, the mass must have changed. (Assuming thatt when the problem states the force doubles, they mean the net force doubles). Note, that the mass does not have to change if the acceleration is zero.
Water cam form large dewdrops in nature. How would droplets made of isopropyl alcohol instead of water be different?
Answer:
Isopropyl alcohol would form smaller droplets because it has a lower surface tension than water has.
Explanation:
What is the specific heat of a substance that absorbs 1600 joules of heat when a sample
of 18 g of the substance increases in temperature from 20 °C to 31°C? Round your answer
to two decimal places if necessary.
Answer:
8.08 J/g °C
Explanation:
Q=m*Cp*ΔT-->
Cp=Q/(m*ΔT) -->
Cp=1600/[18*(31-20)]-->
Cp=8.08 J/g °C
is ice a fluid at room temperature?
Answer:
Ice is the solid state of water, a normally liquid substance that freezes to the solid state at temperatures of 0 °C (32 °F) or lower and expands to the gaseous state at temperatures of 100 °C (212 °F) or higher.
Explanation:
example of kinetic energy into heat energy
Answer:
The kinetic energy of large objects can be converted into this thermal energy.
Explanation:
For example, if you drop a water balloon onto the ground, its kinetic energy is converted mostly to thermal energy. If the balloon weighs 1 kilogram and you drop it from about 2 meters, it will heat up by less.
A 9.00 g bullet is fired horizontally into a 1.20 kg wooden block resting on a horizontal surface. The coefficient of kinetic friction between block and surface is 0.20. The bullet remains embedded in the block, which is observed to slide 0.390 m along the surface before stopping.
Required:
What was the initial speed of the bullet?
Answer:
The initial speed of bullet is "164 m/s".
Explanation:
The given values are:
mass of bullet,
[tex]m'=9.00 \ g[/tex]
or,
[tex]=0.009 \ kg[/tex]
mass of wooden block,
[tex]m=1.20 \ kg[/tex]
speed,
[tex]s=0.390 \ m[/tex]
Coefficient of kinetic friction,
[tex]\mu=0.20[/tex]
As we know,
The Kinematic equation is:
⇒ [tex]v^2=u^2+2as[/tex]
then,
Initial velocity will be:
⇒ [tex]u=v^2-2as[/tex]
[tex]=v^2-2 \mu gs[/tex]
On substituting the given values, we get
⇒ [tex]u=\sqrt{0-2\times 0.20\times 9.8\times 0.390}[/tex]
[tex]=\sqrt{-1.5288}[/tex]
[tex]=1.23 \ m/s[/tex]
As we know,
The conservation of momentum is:
⇒ [tex]mu=m'u'[/tex]
or,
⇒ Initial speed, [tex]u'=\frac{mu}{m'}[/tex]
On substituting the values, we get
⇒ [tex]=\frac{1.20\times 1.23}{0.009}[/tex]
⇒ [tex]=\frac{1.476}{0.009}[/tex]
⇒ [tex]=164 \ m/s[/tex]
5. During a heat transfer investigation, students filled two cups with water. One cup contains 100mL of cold water while the other contains 100 mL of hot water.
A metal heat wire is placed inside the water of both cups and thermometers are attached to each cup. Which of the following BEST explains how the heat is transferred? Cold Water Hot Water.
A. This investigation would not result in any heat being transferred.
B. Convection, because the metal wire was heated through convection currents.
C. Radiation, because the metal wire was heated by electromagnetic waves.
D. Conduction, because the metal wire was in direct contact with water in both containers.
Answer:
D.Conduction, because the metal wire was in direct contact with water in both containers
Conduction, because the metal wire was in direct contact with water in both containers. Option D is correct.
Given that,
Students filled two cups with water. One cup contains 100mL of cold water while the other has 100 mL of hot water. A metal heat wire is placed inside the water of both cups and thermometers are attached to each cup.
It is to be identified, the system contains which type of heat transfer between the cups
Heat transfer is the process, in a thermodynamic system, when an object at a higher temperature is placed with an object at has a lower temperature, after some time the system attains equilibrium because heat flows from higher temperature to lower temperature.
In the given question,
Cups, that are connected through a metal wire, one is hot and the other is cold, Principal of conduction state that when there is a system of connected bodies the heat flows throughout the connected system till the thermal equilibrium attain. Implies heat flow from hot cup to cold cup through the wire through conduction heat transfer.
Thus, Conduction, because the metal wire was in direct contact with water in both containers. Option D is correct.
Learn more about heat transfer here:
https://brainly.com/question/20699475
#SPJ2
Look at pic for question pls help
B IS YOUR ANSWER.
Soft sound has small amplitude and louder sound has large amplitude. Since, the second wave has large amplitude, it will have the loudest sound.
calculate the speed of atrain
that travels 540 meters in 30
seconds?
Answer:
The train is traveling 18 meters per second.
Explanation:
540/30 = 18
To check your answer do 18 * 30 and it equals 540
PLEASE HELP ME WITH THIS ONE QUESTION
A converging lens has a focal length of 40 cm. If an object is placed 50 cm in front of the image, where will the image be formed?
Answer:
the image will be real and inverted
Free use of uniforms and socialization with classmates are possible advantages of ? A.)
dual sports B.)community-based sports programs C.)individual sports D.) school-based sports programs
Answer:
its d
Explanation:
10 You are given the following list of vo-
lumes: 0.45 m3; 375 cm3; 75 cL; 0.6 dm3.
a. Express all the volumes of the list in
liters.
b. Arrange these volumes in a descending
order.
Volumes can be transfered to liters only when their measurement units are dm³. a) Which means that: 0.45m³=450dm³ you move the decimal place three places to the right because m³ is larger measurement unit than dm³. 375 cm³ = 0.375 dm³; 75cl = 0.75l because of the prefix centi. 0.6dm³ = 0.6 dm³
So it will be 450l; 0.375l; 0.75l; 0.6l
b) 450l>0.75l>0.6l>0.375l
0.45m³>75cl>0.6dm³>375cm³
I hope i didn't make a mistake, but it would be good if somebody else answered too, so you can compare the answers and see if i made a mistake
The given volumes in liter will be 450 L, 0.375 L, 0.75 L, 0.6 L and the arrangement in descending order will be 450 L > 0.75 L > 0.6 L > 0.37 L .
What is Volume?Every three-dimensional item takes up space in some way. The volume of this area is what is used to describe it. The area covered within an entity's three-dimensional bounds is referred to as its volume. The object's size is another name for it.
As per the given information in the question,
a.
The given volume in a meter cube is 0.45.
Unit conversion:
1 m³ = 1000 L
So, 0.45 m³ = 0.45 × 1000
= 450 L
The given volume in a centimeter cube is 375.
Unit conversion:
1 cm³ = 0.001 L
375 cm³ = 0.001 × 375
= 0.375 L.
The given volume in a centiliter cube is 75.
Unit conversion:
1 cl³ = 0.01 L
75 cl³ = 75 × 100
= 0.75 L
The given volume in the decimeter cube is 0.6.
1 dm³ = 1 L
0.6 dm³ = 0.6 L
b.
So, the volumes in descending order will be,
450 L > 0.75 L > 0.6 L > 0.37 L or,
0.45 m³ > 75 cl³ > 0.6 dm³ > 375 cm³
To know more about Volume:
https://brainly.com/question/13338592
#SPJ2
A solid, uniform cylinder with mass 8.35kg and diameter 15.0cm is spinning with angular velocity 250rpm on a thin, frictionless axle that passes along the cylinder axis. You design a simple friction-brake to stop the cylinder by pressing the brake against the outer rim with a normal force. The coefficient of kinetic friction between the brake and rim is 0.338. What must the applied normal force be to bring the cylinder to rest after it has turned through 5.05 revolutions?
Answer:
354
Explanation:
5. You are pulling a rubber sneaker along concrete
a. Calculate force of static friction between your sneakers (2kg) and sidewalk if coefficient of
static friction is 0.9
Answer:
Fs = 17.66 N
Explanation:
The force of static friction is given by the following formula:
[tex]F_s = \mu R = \mu W\\[/tex]
where,
Fs = The force of static friction = ?
μ = coefficient of static friction = 0.9
W = weight of sneakers = mg
m = mass of sneakers = 2 kg
g = acceleration due to gravity = 9.81 m/s²
Therefore,
[tex]F_s = \mu mg\\F_s = (0.9)(2\ kg)(9.81\ m/s^2)\\[/tex]
Fs = 17.66 N
Some types of bacteria contain chains of ferromagnetic particles parallel to their long axis. The chains act like small bar magnets that align these magnetotactic bacteria with the earth's magnetic field. In one experiment to study the response of such bacteria to magnetic fields, a solenoid is constructed with copper wire, 1.0 mmmm in diameter, evenly wound in a single layer to form a helical coil of length 40 cmcm and diameter 12 cmcm. The wire has a very thin layer of insulation, and the coil is wound so that adjacent turns are just touching. The solenoid, which generates a magnetic field, is in an enclosure that shields it from other magnetic fields. A sample of magnetotactic bacteria is placed inside the solenoid. The torque on an individual bacterium in the solenoid’s magnetic field is proportional to the magnitude of the magnetic field and to the sine of the angle between the long axis of the bacterium and the magnetic-field direction.
What current is needed in the wire so that the magnetic field experienced by the bacteria has a magnitude of 150μT?
a. 0.095 A
b. 0.12 A
c. 0.30 A
d. 14 A.
Answer:
the required current is 0.12 A
Option b) 0.12 A is the correct answer
Explanation:
Given the data in the question,
to determine the current needed in the wire, we use the following relation;
B = μ₀n[tex]I[/tex]
[tex]I[/tex] = B / μ₀n
where μ₀ is the magnetic constant ( 4π × 10⁻⁷ T.m/A )
n is the number of turns ( 1 / 1mm[tex]\frac{10^{-3}m}{1 mm}[/tex]) = 1000 m⁻¹
B is magnitude ( 150μT ( [tex]\frac{10^{-6}m}{1uT}[/tex]) )
so we substitute
[tex]I[/tex] = [ 150μT ( [tex]\frac{10^{-6}m}{1uT}[/tex]) ] / [ ( 4π × 10⁻⁷ T.m/A ) × 1000 m⁻¹ ]
[tex]I[/tex] = [ 0.00015 ] / [ 0.00125 ]
[tex]I[/tex] = 0.12 A
Therefore, the required current is 0.12 A
Option b) 0.12 A is the correct answer
HELP ME PLEASE <333, NUMBER 3 ONLY!
Answer:
b
Explanation:
is correct .....................
i think
⦁ A certain resistor is required to dissipate 0.25 W, what standard rating should be used?
Answer:A
Explanation:
Two objects, one with a mass of 2 m and one with a mass of 4 m are attracted to each other
by a gravitational force. If the force on 2 m is F, what is the force on mass 4 m in terms of F?
o reduce the drag coefficient and thus to improve the fuel efficiency, the frontal area of a car is to be reduced. Determine the amount of fuel and money saved per year as a result of reducing the frontal area from 18 to 14 ft2. Assume the car is driven 12,000 mi a year at an average speed of 55 mi/h. Take the density and price of gasoline to be 50 lbm/ft3 and $3.10/gal, respectively; the density of air to be 0.075 lbm/ft3, the heating value of gasoline to be 20,000 Btu/lbm; and the overall efficiency of the engine to be 30 percent. Take the drag coefficient as CD
Complete question
To reduce the drag coefficient and thus to improve the fuel efficiency, the frontal area of a car is to be reduced. Determine the amount of fuel and money saved per year as a result of reducing the frontal area from 18 to 14 ft2. Assume the car is driven 12,000 mi a year at an average speed of 55 mi/h. Take the density and price of gasoline to be 50 lbm/ft3 and $3.10/gal, respectively; the density of air to be 0.075 lbm/ft3, the heating value of gasoline to be 20,000 Btu/lbm; and the overall efficiency of the engine to be 30 percent. Take the drag coefficient as CD=0.3 for a passenger car.
Answer:
22.22%
$57
Explanation:
From the question we are told that
Initial area of frontal area [tex]a_1=18ft^2[/tex]
Final area of frontal area [tex]a_2=14ft^2[/tex]
Distance covered a year [tex]D=12000mile[/tex]
Average speed a year [tex]V_{avg}=55mile/h[/tex]
Density [tex]\rho=50 lbm/ft3[/tex]
Price [tex]P= $3.10/gal[/tex]
Density of air [tex]\rho_{air} 0.075 lbm/ft3[/tex]
Heating value of gasoline [tex]Q=20,000 Btu/lbm[/tex]
Efficiency [tex]\eta=30\%[/tex]
Drag coefficient [tex]CD=0.3[/tex]
[tex]\triangle A=18-14ft^2=4ft^2[/tex]
Generally the equation for drag force [tex]C_D[/tex] is mathematically given as
[tex]F_D=\frac{C_DAPV^2}{2}[/tex]
[tex]F_D=\frac{0.3*18*0.075*(80.685^2)*A}{2}[/tex]
[tex]F_D=73.24Alb[/tex]
where [tex]v=55mil/h*1.467=80.685ft/s[/tex]
Generally the equation for work done W is mathematically given as[tex]W=F_D*L[/tex]
where [tex]L=12000mile*5280[/tex]
[tex]L=63360000[/tex]
[tex]W=73.24A*63360000[/tex]
[tex]W=4.6*10^9A[/tex]
Generally the equation for overall efficiency [tex]\eta[/tex] is mathematically given as
where
[tex]W_{req}=required\ gasoline\ power\ efficiency[/tex]
[tex]\eta=\frac{W}{W_{req}}[/tex]
[tex]W_{req}=\frac{W}{\eta}[/tex]
[tex]W_{req}=\frac{4.6*10^9}{0.3}[/tex]
[tex]W_{req}=1.55*10^{10}A[/tex]
Generally the equation for reduction fee with change in frontal area [tex]\triangle M[/tex] is mathematically given as
[tex]\triangle M =\triangle Vgasoline*cost[/tex]
Where
[tex]\triangle Vgasoline= volume\ reduction\ of\ gasoline[/tex]
[tex]\triangle Vgasoline=\frac{E_{req}}{H*P}[/tex]
[tex]\triangle Vgasoline=\frac{1.55*10^{10}A}{20000*778.169*32.2*50}[/tex]
if
[tex]20000btu/ibm=20000*778.169*32.2(1bm.ft^2/s)[/tex]
[tex]\triangle Vgasoline=\frac{1.55*10^{10}A}{20000*778.169*32.2*50}[/tex]
[tex]\triangle Vgasoline=0.61859A[/tex]
Therefore
[tex]\triangle M =0.61859A*3.10[/tex]
if [tex]1ft^2=7.48gal[/tex]
[tex]\triangle M =0.61859(4)*3.10*7.48[/tex]
[tex]\triangle M = \$ 57.671[/tex]
Generally the equation for reduction of fuel [tex]F_r[/tex]is mathematically given as
[tex]F_r=\frac{\triangle A}{\triangle i}*100[/tex]
where
[tex]\triangle i=18ft^2[/tex]
[tex]F_r=\frac{4}{18}*100[/tex]
Fuel reduction price by reducing front area is 22.22%
Money saved per year is $57
So the the greater the height, the
farther something can fall, the greater
the potential energy.
True
False