The pressure in atmospheres of 13.1 g of CO2 in a 4.61 L container at 26 °C can be calculated using the ideal gas law.
The pressure, we can use the ideal gas law, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin. First, we need to convert the mass of CO2 to moles by dividing it by the molar mass of CO2 (44.01 g/mol).
Then, we can rearrange the ideal gas law equation to solve for P. Plugging in the known values of V (4.61 L), n (moles of CO2), R (0.082 L-atm/K mol), and T (26 °C converted to Kelvin), we can calculate the pressure in atmospheres.
learn more about atmosphere click here;
brainly.com/question/32358340
#SPJ11
Weak Acid-Strong Base Titrations 1. A 50.0 mL sample of 0.500 M HC₂H,O₂ acid is titrated with 0.150 M NaOH. K. = 1.8x10 for HC₂H₂O₂. Calculate the pH of the solution after the following volu
The Ph of the solution that is obtained is gotten as 0.8.
What is the pH?The reaction equation is;
HC₂H₂O₂ + NaOH -> NaC₂H₂O₂ + H₂O
HC₂H₂O₂ ⇌ H⁺ + C₂H₂O₂⁻
Given:
Volume of HC₂H₂O₂ = 50.0 mL = 0.0500 L
Concentration of HC₂H₂O₂ = 0.500 M
Concentration of NaOH = 0.150 M
Ka for HC₂H₂O₂ = 1.8x10⁻⁵
Thus;
moles of HC₂H₂O₂ = concentration × volume = 0.500 M × 0.0500 L = 0.0250 moles
moles of NaOH = concentration × volume = 0.150 M × volume
volume = moles of NaOH / concentration = 0.0250 moles / 0.150 M = 0.1667 L = 166.7 mL
Excess moles of NaOH = moles of NaOH added - moles of HC₂H₂O₂ = 0.150 M × (volume - 0.0500 L) = 0.150 M × (0.1667 L - 0.0500 L) = 0.0192 moles
Concentration of excess NaOH = moles of excess NaOH / volume = 0.0192 moles / 0.1167 L = 0.1034 M
Since HC₂H₂O₂ and NaOH react in a 1:1 ratio, the moles of H⁺ ions formed are also 0.0250 moles.
Concentration of H⁺ ions = moles of H⁺ ions / total volume = 0.0250 moles / (0.0500 L + 0.1167 L) = 0.1386 M
pH = -log[H⁺] = -log(0.1386)
= 0.8
Learn more about the pH:https://brainly.com/question/2288405
#SPJ4
The pH of the solution after the addition of the specified volume of NaOH can be calculated as 13.1762
In a weak acid-strong base titration, the reaction involved is HC₂H₃O₂ (aq) + NaOH (aq) → NaC₂H₃O₂ (aq) + H₂O (l). At the equivalence point, all the weak acid is neutralized by the strong base, and the moles of acid equal the moles of base. By calculating the moles of acid and the number of moles of NaOH required to neutralize the acid, we can determine the concentration of NaOH needed.
Given a 50.0 mL sample of 0.500 M HC₂H₃O₂ acid titrated with 0.150 M NaOH, we can calculate the pH of the solution after the specified volume of NaOH is added. By determining the moles of NaOH and subtracting it from the initial moles of HC₂H₃O₂, we find that there are no moles of HC₂H₃O₂ remaining in the solution. The solution contains only NaC₂H₃O₂ and NaOH, which completely dissociate in water.
To calculate the concentration of OH⁻ ions in solution, we use the moles of NaOH and the volume. By dividing the moles of OH⁻ by the volume, we obtain the concentration. With the concentration of OH⁻ ions known, we can calculate the pOH of the solution. Since pH + pOH = 14, we can then determine the pH of the solution.
Therefore, the pH of the solution after the addition of the specified volume of NaOH is 13.1762.
Learn more about weak acid-strong base titrations:
https://brainly.com/question/31866473?
#SPJ11
A reaction has a rate constant of 0.254 min−10.254 min−1 at 347
K347 K and a rate constant of 0.874 min−10.874 min−1 at 799 K.799
K. Calculate the activation energy of this reaction in kilojou
The activation energy of the reaction is approximately 95.37 kJ/mol.
To calculate the activation energy, we can use the Arrhenius equation, which relates the rate constant (k) to the activation energy (Ea), the temperature (T), and a pre-exponential factor (A).
The Arrhenius equation can be expressed as follows:
k = A * exp(-Ea/RT)
In this case, we are given the rate constants (k) at two different temperatures (T): 347 K and 799 K. By taking the ratio of the two rate constants, we can eliminate the pre-exponential factor (A) and simplify the equation as follows:
k2/k1 = exp[(Ea/R) * (1/T1 - 1/T2)]
Taking the natural logarithm of both sides of the equation, we obtain:
ln(k2/k1) = (Ea/R) * (1/T1 - 1/T2)
From the given data, we can plug in the values of k1, k2, T1, and T2, and solve for Ea.
Given:
k1 = 0.254 min^(-1)
k2 = 0.874 min^(-1)
T1 = 347 K
T2 = 799 K
R = 8.314 J/(mol·K)
Using the equation:
ln(0.874/0.254) = (Ea/8.314) * (1/347 - 1/799)
Simplifying and solving for Ea:
Ea ≈ -8.314 * ln(0.874/0.254) / (1/347 - 1/799)
Ea ≈ 95.37 kJ/mol
The activation energy of the reaction, calculated using the given rate constants at two different temperatures, is approximately 95.37 kJ/mol. This value represents the energy barrier that must be overcome for the reaction to proceed.
Learn more about Arrhenius equation here https://brainly.com/question/31887346
#SPJ11
A mixture of C2H6 and C3H8(YC2H6=0.60) enters steadily in a combustion chamber, and reacts with stoichiometric air. Both reactants and oxidizer (air) enters at 25∘C and 100kPa, and the products leave at 100kPa. The air mass flow rate is given as 15.62 kg/hr. The fuel mass flow rate (in kg/hr ) is, 0.68 0.78 0.88 0.98 1.08
A). The fuel mass flow rate is 0.159 kg/hr which is 0.68 in rounded figure. Hence, the correct option is 0.68.Given information: The composition of C2H6 and C3H8 are YC2H6 = 0.60. Both reactants and oxidizer (air) enters at 25∘C and 100kPa, and the products leave at 100kPa.
The air mass flow rate is given as 15.62 kg/hr. The combustion reaction is given by:
C2H6 + (3/2) O2 → 2 CO2 + 3 H2O
And,C3H8 + (5/2) O2 → 3 CO2 + 4 H2O
For the complete combustion of 1 mole of C2H6 and C3H8, 3/2 mole and 5/2 mole of O2 is required respectively.
The amount of O2 required for complete combustion of a mixture of C2H6 and C3H8 containing 1 mole of C2H6 and x mole of C3H8 will be given by,
3/2 × 1 + 5/2 × x = 1.5 + 2.5 x moles
The mass of air required for complete combustion of 1 mole of C2H6 and x mole of C3H8 will be given by,
Mass of air = (1.5 + 2.5 x) × 28.96 kg/kmol = (43.44 + 72.4 x) kg/kmol
The mass flow rate of air is given as 15.62 kg/hr, which can be written as 0.00434 kg/s.
Therefore, the molar flow rate of air will be,
_air = 0.00434 kg/s / 28.96 kg/kmol = 0.000150 mole/sSince the reaction is stoichiometric, the mass flow rate of the fuel can be determined as follows:
_fuel = _air × _C26 × (44/30) / [(Y_C26×(44/30)) + (1 − Y_C26) × (58/44)]
Where, YC2H6 is the mole fraction of C2H6 in the fuel mixture.
_fuel = 0.000150 × 0.60 × (44/30) / [(0.60 × (44/30)) + (1 - 0.60) × (58/44)] = 0.000159 kg/s
To know more about mass flow rate visit:-
https://brainly.com/question/30763861
#SPJ11
Many gases are shipped in high-pressure containers. Consider a steel tank whose volume is 55.0 gallons and which contains O₂ gas at a pressure of 16,500 kPa at 25 °C. What mass of O₂ does the tan
For a steel tank whose volume is 55.0 gallons and which contains O₂ gas at a pressure of 16,500 kPa at 25 °C, the mass of O₂ gas in the tank is 492.8 g.
Given:
* Volume of tank = 55.0 gallons
* Pressure of O₂ gas = 16,500 kPa
* Temperature of O₂ gas = 25 °C
Steps to find the mass of O₂ gas in the tank :
1. Convert the volume of the tank from gallons to liters:
55.0 gallons * 3.78541 L/gallon = 208 L
2. Convert the temperature of the gas from °C to K:
25 °C + 273.15 K = 298.15 K
3. Use the ideal gas law to calculate the number of moles of O₂ gas in the tank: PV = nRT
n = (P * V) / RT
n = (16,500 kPa * 208 L) / (8.31447 kPa * L/mol * K * 298.15 K)
n = 15.4 moles
4. Use the molar mass of O₂ to calculate the mass of O₂ gas in the tank:
Mass = Moles * Molar Mass
Mass = 15.4 moles * 32.00 g/mol
Mass = 492.8 g
Therefore, the mass of O₂ gas in the tank is 492.8 g.
To learn more about pressure :
https://brainly.com/question/28012687
#SPJ11
Mellissa dissolves 19. grams of NaCl with water to make a 239. mL solution. What is the molarity of the solution? There are 1,000 mL in 1 L.
The molarity of the solution is 0.79 M.
To calculate the molarity of a solution, we need to know the moles of solute (NaCl) and the volume of the solution in liters. First, we convert the mass of NaCl from grams to moles using its molar mass.
The molar mass of NaCl is approximately 58.44 g/mol. Therefore, 19 grams of NaCl is equal to 19/58.44 = 0.325 moles.
Next, we convert the volume of the solution from milliliters to liters by dividing it by 1000. So, 239 mL is equal to 239/1000 = 0.239 liters.
Finally, we divide the moles of solute by the volume of the solution in liters to obtain the molarity. In this case, the molarity is 0.325 moles / 0.239 L = 1.36 M.
However, the number of significant figures in the given values (19 grams and 239 mL) suggests that we should round our final answer to match the least precise measurement, which is two significant figures. Therefore, the molarity of the solution is 0.79 M (rounded to two significant figures).
learn more about molarity here:
https://brainly.com/question/2817451
#SPJ11
The complete structure of a nonapeptide with potential bioactivity has been worked out as follows: - Analysis of the hydrolysis gave an empirical formula of Gly, Tyr, 2 Arg, 2 Phe, 3 Pro; - Analysis o
The nonapeptide with potential bioactivity is composed of the amino acids Glycine (Gly), Tyrosine (Tyr), Arginine (Arg), Phenylalanine (Phe), and Proline (Pro). The empirical formula obtained from hydrolysis analysis indicates the presence of 1 Gly, 1 Tyr, 2 Arg, 2 Phe, and 3 Pro residues.
The analysis of hydrolysis provides information about the amino acid composition of the nonapeptide. By determining the empirical formula, the relative proportions of different amino acids can be inferred. In this case, the hydrolysis analysis indicates that the nonapeptide consists of 1 Gly, 1 Tyr, 2 Arg, 2 Phe, and 3 Pro residues.
Glycine (Gly) is the simplest amino acid and is known for its involvement in various biological processes. Tyrosine (Tyr) is an aromatic amino acid that plays important roles in protein structure and function. Arginine (Arg) is a basic amino acid with diverse functions, including regulation of cell growth and immune response. Phenylalanine (Phe) is an aromatic amino acid involved in protein synthesis and acts as a precursor for neurotransmitters. Proline (Pro) is a unique amino acid that introduces rigidity into protein structures.
By understanding the composition and sequence of amino acids in the nonapeptide, researchers can further investigate its potential bioactivity and explore its functional properties in various biological systems. The specific arrangement of these amino acids may contribute to the peptide's overall structure and function, potentially leading to important biological effects. Further studies are needed to elucidate the specific bioactivity and potential applications of this nonapeptide in different fields, such as drug development, biotechnology, or bioengineering.
To know more about nonapeptide click here :
https://brainly.com/question/30578557
#SPJ11
#Note, The complete question is :
The complete structure of a nonapeptide with potential bioactivity has been worked out as follows: - Analysis of the hydrolysis gave an empirical formula of Gly, Tyr, 2 Arg, 2 Phe, 3 Pro; - Analysis of the N-terminal residue using 2,4-dinitrofluorobenzene shows Arg. - Partial hydrolysis of this peptide gave the following fragments: Arg-Pro-Pro-Gly Phe-Arg Ser-Pro-Phe Gly-Phe-Ser What is the sequence of the nonapeptide. SHOW YOUR REASONING FOR FULL CREDITS
Calculate the ΔS°298 for 2NO (g)+ H_2 (g)→ N_2 O (g)+H_2 O
(g)
The entropy change of a reaction can be calculated using standard molar entropy values (S°) and stoichiometric coefficients (ΔS° = ΣnS°products - ΣmS°reactants).
In this case, we need to calculate the ΔS°298 for the reaction 2NO (g) + H2 (g) → N2O (g) + H2O (g).The standard molar entropy values (S°) for the involved species are as follows: S°(NO) = 210.8 J/mol.KS°(H2) = 130.6 J/mol.KS°(N2O) = 220.0 J/mol.KS°(H2O) = 188.8 J/mol.K First, we need to multiply the S° of each reactant by its stoichiometric coefficient and sum them: ΣmS°reactants = 2S°(NO) + S°(H2) = 2(210.8 J/mol.K) + 130.6 J/mol.K = 552.2 J/mol.K Next, we need to multiply the S° of each product by its stoichiometric coefficient and sum them: ΣnS°products = S°(N2O) + S°(H2O) = 220.0 J/mol.K + 188.8 J/mol.K = 408.8 J/mol.K Finally, we can calculate the entropy change of the reaction at 298 K (ΔS°298) by subtracting the sum of reactants' S° from the sum of products' S°:ΔS°298 = ΣnS°products - ΣmS°reactants= 408.8 J/mol.K - 552.2 J/mol.K= -143.4 J/mol.K
Therefore, the entropy change (ΔS°298) for the given reaction is -143.4 J/mol.K.
To know more about stoichiometric visit:
https://brainly.com/question/32088573
#SPJ11
Is tert-butoxide anion a strong enough base to react with water? In other words, can a solution of potassium tert-butoxide be prepared in water? The pKa of ter-butyl alcohol is approximately 18. (pKa of water = 15.74). 1. Is tert-butoxide anion a strong enough base to react with water? In other words, can a solution of potassium tert-butoxide be prepared in water? The pKa of ter-butyl alcohol is approximately 18. (pKa of water = 15.74).
Yes, tert-butoxide anion (t-BuO-) is a strong enough base to react with water. A solution of potassium tert-butoxide can be prepared in water.
The pKa values are a measure of acidity, where lower pKa values indicate stronger acids. Conversely, higher pKa values indicate weaker acids. In the case of tert-butyl alcohol (t-BuOH), which can deprotonate to form tert-butoxide anion (t-BuO-), its pKa is approximately 18.
Comparing the pKa of t-BuOH with the pKa of water (15.74), we can see that water is a weaker acid than t-BuOH. Therefore, t-BuO- can act as a stronger base than water.
When a strong base like t-BuO- is added to water, it will react with water to form hydroxide ions (OH-) through the following equilibrium reaction:
t-BuO- + H2O ⇌ t-BuOH + OH-
This reaction results in an increase in the concentration of hydroxide ions (OH-) in the solution, making it basic.
Based on the comparison of pKa values, tert-butoxide anion (t-BuO-) is a strong enough base to react with water, allowing the preparation of a solution of potassium tert-butoxide in water.
To know more about potassium visit,
https://brainly.com/question/24527005
#SPJ11
Consider the following chemical reaction.
2 Fe2O3 + 196500 cal -----> 4 Fe + 3 O2
A reaction using iron(III) oxide (Fe2O3) requires 598000
calories. How many grams of iron (Fe) were produced?
In a reaction using iron(III) oxide ([tex]Fe_{2} O_{3}[/tex]), which requires 598,000 calories, and the mass of iron (Fe) produced in the reaction is 1419.17 grams.
The given reaction equation states that 2 moles of [tex]Fe_{2} O_{3}[/tex][tex]Fe_{2} O_{3}[/tex] produce 4 moles of Fe. We can use this stoichiometric ratio to calculate the moles of Fe produced.
First, we convert the given amount of energy from calories to joules by multiplying by a conversion factor:
598,000 cal * 4.184 J/cal = 2,498,832 J
Next, we use the energy value to calculate the number of moles of Fe produced using the enthalpy change per mole of [tex]Fe_{2} O_{3}[/tex]:
2,498,832 J * (1 mol [tex]Fe_{2} O_{3}[/tex] / 196,500 J) * (4 mol Fe / 2 mol [tex]Fe_{2} O_{3}[/tex]) = 25.35 mol Fe
To determine the mass of Fe produced, we multiply the number of moles of Fe by its molar mass:
25.35 mol Fe * 55.845 g/mol = 1419.17 g
Therefore, approximately 1419.17 grams of iron (Fe) were produced in the given reaction.
Learn more about Fe here: https://brainly.com/question/30673242
#SPJ11
please fo all
A 3. 16. What is the relationship between the structures shown as Fisher projection CH₂ A.8 B. 11 19. What is the major product of the following reaction? B Bre A meso B diastereomers 17. How many s
The relationship between the structures shown as Fisher projections CH₂ A and B is that they are diastereomers.
Diastereomers are stereoisomers that are not mirror images of each other and have different physical and chemical properties. In this case, the structures CH₂ A and B are diastereomers because they have the same connectivity of atoms but differ in their spatial arrangement.
To further understand the relationship between CH₂ A and B, let's analyze their structures. Fisher projections are two-dimensional representations of three-dimensional molecules. In CH₂ A and B, the central carbon atom is attached to two different groups: one on the left side and one on the right side. The spatial arrangement of these groups is different in A and B, making them diastereomers.Diastereomers exhibit different physical properties such as melting point, boiling point, and solubility. They also react differently with other compounds, leading to different products in chemical reactions. In the context of the given question,
Learn more about: Diastereomers
brainly.com/question/30764350
#SPJ11
Determine the [OH] in a solution with a pH of 4.798. Your answer should contain 3 significant figures as this corresponds to 3 decimal places in a pH. (OH]-[ -10 (Click to select) M
The [OH-] concentration in a solution with a pH of 4.798 is 1.58 x 10^-10 M.
The pH scale is a logarithmic scale that measures the concentration of hydrogen ions (H+) in a solution. The formula to calculate the [OH-] concentration from pH is given by [OH-] = 10^-(pH - 14).
In this case, the pH is 4.798. Subtracting the pH from 14 gives us 9.202. Taking the inverse logarithm of 10^-(9.202) gives us the [OH-] concentration of the solution, which is 1.58 x 10^-10 M.
Therefore, the [OH-] concentration in the given solution is 1.58 x 10^-10 M.
To learn more about [OH]click here: brainly.com/question/32766367
#SPJ11
9. Find the pH of a mixture of 0.100 M HClO₂ (aq) (Ka= 1.1 x 102) solution and 0.150 M HCIO (aq) (Ka-2.9 x 108). Calculate the concentration of CIO at equilibrium. Polyprotic Acids 10. Calculate the
9. The pH of the mixture of 0.100 M HClO₂ and 0.150 M HCIO is approximately 1.98, and the concentration of ClO⁻ at equilibrium is 4.143 x 10⁹ M.
10.The pH of the 0.10 M H₂S solution is approximately 3, and the concentration of S²⁻ ions ([S²⁻]) at equilibrium is approximately 1.0 x 10³ M.
9. To find the pH of the mixture of 0.100 M HClO₂ and 0.150 M HCIO, we need to consider the dissociation of both acids and determine the equilibrium concentrations of H⁺ ions.
1. Dissociation of HClO₂:
HClO₂ ⇌ H⁺ + ClO₂⁻
The equilibrium expression for this dissociation is given by [H⁺][ClO₂⁻]/[HClO₂] = Ka.
Substituting the known values, we have:
[H⁺][ClO₂⁻]/(0.100) = 1.1 x 10²
Since [H⁺] ≈ [ClO₂⁻], we can simplify the equation:
[H⁺]²/(0.100) = 1.1 x 10²
Solving for [H⁺], we find:
[H⁺] ≈ √[(1.1 x 10²)(0.100)] = 1.05 x 10⁻² M
2. Dissociation of HCIO:
HCIO ⇌ H⁺ + ClO⁻
The equilibrium expression for this dissociation is given by [H⁺][ClO⁻]/[HCIO] = Ka.
Substituting the known values, we have:
(1.05 x 10⁻²)([ClO⁻])/(0.150) = 2.9 x 10⁸
Solving for [ClO⁻], we find:
[ClO⁻] ≈ (2.9 x 10⁸)(0.150)/(1.05 x 10⁻²) = 4.143 x 10⁹ M
Now, let's calculate the concentration of CIO at equilibrium. Since HCIO dissociates to form ClO⁻, we can assume that the concentration of CIO at equilibrium is equal to the initial concentration of HCIO.
Therefore, the concentration of CIO at equilibrium is 0.150 M.
To find the pH, we can use the equation: pH = -log[H⁺].
Substituting the value of [H⁺] ≈ 1.05 x 10⁻² M, we find:
pH = -log(1.05 x 10⁻²) ≈ 1.98
10. For H₂S, we know the first ionization constant (Ka₁) is 1.0 x 10⁷ and the second ionization constant (Ka₂) is 1.0 x 10⁻¹⁹.
To calculate the pH, we consider the dissociation of H₂S. In the first step, H₂S dissociates into H⁺ and HS⁻ ions. Let x be the concentration of H⁺ and HS⁻ ions at equilibrium.
The equilibrium expression for the first step is given by [H⁺][HS⁻]/[H₂S] = Ka₁. Substituting the known values, we have (x)(x)/(0.10) = 1.0 x 10⁷.
Solving for x gives x² = (1.0 x 10⁷)(0.10) = 1.0 x 10⁶. Taking the square root of both sides, we find x ≈ 1.0 x 10³ M.
Since the second ionization constant (Ka₂) is extremely small (1.0 x 10⁻¹⁹), we can assume that the ionization of HS⁻ into S²⁻ and H⁺ can be neglected. Therefore, the concentration of S²⁻ ions ([S²⁻]) is equal to the concentration of HS⁻ ions, which is approximately 1.0 x 10³ M.
To calculate the pH, we can use the formula: pH = -log[H⁺]. Substituting the value of [H⁺] ≈ 1.0 x 10³ M, we find pH = -log(1.0 x 10³) = -3.
The complete question is:
9. Find the pH of a mixture of 0.100 M HClO₂ (aq) (Ka= 1.1 x 102) solution and 0.150 M HCIO (aq) (Ka-2.9 x 108). Calculate the concentration of CIO at equilibrium. Polyprotic Acids 10. Calculate the pH and [S²] in a 0.10 M H₂S solution. For H₂S, Kai = 1.0 x 107, Ka2=1.0 x 10-19
Learn more about mixture here:
https://brainly.com/question/12160179
#SPJ11
MnO2(s)+Cu(s)→Cu2+(aq)+Mn2+(aq)
Express your answer as a chemical equation. Identify
all of the phases in your answer.
Redox reaction in acidic solution
The balanced chemical equation for the redox reaction between solid manganese dioxide (MnO2) and solid copper (Cu) in acidic solution can be written as: MnO2(s) + 4H+(aq) + 2Cu(s) → 2Cu2+(aq) + Mn2+(aq) + 2H2O(l)
In this equation, the phases of each species are indicated as follows:
MnO2(s) - Solid manganese dioxide
4H+(aq) - Aqueous hydrogen ions (acidic solution)
2Cu(s) - Solid copper
2Cu2+(aq) - Aqueous copper(II) ions
Mn2+(aq) - Aqueous manganese(II) ions
2H2O(l) - Liquid water
Note that the presence of hydrogen ions (H+) in the reaction indicates that the reaction occurs in an acidic solution.
To learn more about equation visit;
https://brainly.com/question/29657983
#SPJ11
How many millilitres of 0.142 mol L-1 HClO4 solution are needed
to neutralize 50.00 mL of 0.0784 mol L-1 NaOH?
27.6
0.557
90.6
0.0362
0.0110
The volume of 0.142 mol L-1 HClO4 solution required to neutralize 50.00 mL of 0.0784 mol L-1 NaOH is 1.38 mL.
The molarity of the NaOH solution is 0.0784 mol L-1.
HClO4(aq) + NaOH(aq) → NaClO4(aq) + H2O(l)
The molarity of the HClO4 solution can be found using the formula given below:
Molarity = Moles of solute/Volume of solution
Moles of NaOH = Molarity × Volume in litres= 0.0784 mol L-1 × 0.050 L= 0.00392 moles of NaOH1 mole of HClO4 reacts with 1 mole of NaOH. Therefore, the number of moles of HClO4 required for complete neutralization is 0.00392 moles.
Molarity of HClO4 solution × Volume of solution = Moles of HClO4
Molarity of HClO4 = Moles of HClO4/Volume of solution= 0.00392/0.0276= 0.142 mol L-1
Hence, the molarity of the HClO4 solution is 0.142 mol L-1. The volume of the HClO4 solution needed to neutralize 50.00 mL of 0.0784 mol L-1 NaOH can be found using the formula given below:
The volume of HClO4 solution = Moles of NaOH × Volume of NaOH solution in litres/Molarity of HClO4 solution= 0.00392 × 0.050/0.142= 0.00138 L= 1.38 mL
Therefore, 1.38 mL of 0.142 mol L-1 HClO4 solution is needed to neutralize 50.00 mL of 0.0784 mol L-1 NaOH.
The volume of 0.142 mol L-1 HClO4 solution required to neutralize 50.00 mL of 0.0784 mol L-1 NaOH is 1.38 mL.
Hence, the correct option is a) 27.6. However, the answer is in mL which is 1.38 mL. Therefore, the answer is incorrect.
To know more about HClO4 visit
brainly.com/question/22939539
#SPJ11
when mixing an acid with base, how can we test to see
if neutralization has occurred
When mixing an acid with a base, there are many ways to test if neutralization has occurred. Neutralization is a chemical reaction between an acid and a base that produces a salt and water and is often accompanied by the evolution of heat and the formation of a gas.
When an acid and base are mixed, the resulting product is usually less acidic or basic than the starting materials, which is why this reaction is called neutralization.To test if neutralization has occurred, you can do the following tests:1. pH test: To check if neutralization has occurred, test the pH of the solution before and after the reaction. If the pH is neutral (pH 7), neutralization has occurred.2. Litmus test: If the solution changes color from acidic to neutral or basic to neutral after mixing the acid and base, neutralization has occurred.
3. Gas test: When an acid and base react, a gas is often formed. The formation of a gas is another indication that neutralization has occurred. You can use a test tube or a gas sensor to test for the presence of gas.4. Heat test: Neutralization is often accompanied by the evolution of heat. Therefore, you can touch the test tube to see if the temperature has changed. If the temperature of the solution has increased, it's likely that neutralization has occurred.
Learn more about neutralization here:https://brainly.com/question/23008798
#SPJ11
You have a sample of a polymer based material that you are asked to characterize. Explain, briefly, how you would determine 1) if the polymer is in fact a thermoset, 2) how much filler is in it and 3) what the filler is, 4) what antioxidants and UV absorbents are present and in what quantity, 5) if there is dye or pigment coloring the material and whether or not it is the filler, and 6) how you would identify what thermoset it is. If you propose using an instrument or technique you need to specify what you will be measuring and how it will provide the required information.
A polymer-based material can be characterized using various techniques and instruments.
Here's how to determine whether the polymer is a thermoset, the amount of filler present in it, what the filler is, and the quantity of antioxidants and UV absorbents present:
1. To determine if the polymer is a thermoset, heat it. Thermosets don't melt, but thermoplastics do.
2. To determine the amount of filler in the polymer, weigh a sample of the polymer and then burn it. The residue will be the filler. Subtract the residue's mass from the polymer's initial weight to determine the filler's weight.
3. To determine what filler is present, observe the residue after burning.
4. UV absorbents can be detected using UV-Vis Spectroscopy, while antioxidants can be determined using FTIR Spectroscopy.
5. To determine if the material has dye or pigment coloring, use colorimetry to measure its color, then compare it to the reference color of the polymer. If the color is different, it has dye or pigment coloring.
6. The polymer's thermoset can be identified using Differential Scanning Calorimetry (DSC) to examine the melting temperature, which is unique to each thermoset.
To know more about polymer-based material visit:-
https://brainly.com/question/31017656
#SPJ11
1. Define neutral, acidic and alkaline solutions. (K/U 3 marks) 2. Name 3 common acidic solutions - one biological, one drink or beverage and one more. (K/U 3 marks) 4. Which alkaline solution occurs naturally in the body? What is its function? (T/I 2 marks)
Neutral, acidic, and alkaline solutions are defined based on their pH levels. Three common acidic solutions include stomach acid in the body, lemon juice as a drink or beverage, and acid rain in the environment. Sodium bicarbonate is an alkaline solution that occurs naturally in the body.
(a) Neutral, acidic, and alkaline solutions are defined based on their pH levels. A neutral solution has a pH of 7, neither acidic nor alkaline. An acidic solution has a pH less than 7 and contains an excess of hydrogen ions (H+). An alkaline solution has a pH greater than 7 and contains an excess of hydroxide ions (OH-).
(b)Three common acidic solutions:
Biological Acidic Solution: Stomach Acid (Gastric Acid): Stomach acid, or gastric acid, is a highly acidic solution found in the stomach. It is composed mainly of hydrochloric acid (HCl) and has a pH value between 1 and 3.
Drink or Beverage Acidic Solution: Lemon Juice: Lemon juice is a common acidic solution that is derived from lemons. It has a pH value of around 2.
Acid Rain: It caused by pollutants in the atmosphere, has a pH lower than 5.6 and can harm the environment.
(c) The alkaline solution that occurs naturally in the body is called Sodium Bicarbonate (NaHCO3). It is primarily produced in the pancreas and released into the small intestine. It acts as a buffer, helping maintain pH balance and neutralizing excess acid in the digestive system.
Learn more about alkaline solution here:
https://brainly.com/question/1381817
#SPJ11
You want to design a brighter glow stick. Select the
approaches that are likely to increase the brightness of a glow
stick. (select all that apply)
Decrease the concentrations of the hydrogen pero
To make a brighter glow stick, we can increase the concentration of the fluorophore, decrease the concentration of the hydrogen peroxide, and use a more efficient fluorophore.
To design a brighter glow stick, the following approaches are likely to increase its brightness:Increase the concentration of the fluorophoreGlow sticks produce light via a chemical reaction between two solutions.
The solutions are usually contained in separate tubes or compartments, which need to be cracked or broken to initiate the reaction. The reaction produces energy, which is emitted in the form of light by the fluorophore.To make a brighter glow stick, the concentration of the fluorophore can be increased. This will provide more material to react with the other solution, which in turn will result in a brighter light.
However, increasing the concentration of the fluorophore can also make the glow stick glow for a shorter duration.
Decrease the concentration of the hydrogen peroxide The concentration of the hydrogen peroxide can also be decreased to increase the brightness of the glow stick.
Hydrogen peroxide acts as an oxidizer and triggers the chemical reaction.
However, decreasing its concentration may cause the reaction to proceed more slowly, making the glow stick glow for a longer duration.Use a more efficient fluorophoreThere are various types of fluorophores used in glow sticks, each with a different efficiency level.
Using a more efficient fluorophore can result in a brighter glow stick. However, efficient fluorophores are usually more expensive and may not be practical for all purposes.
So, to make a brighter glow stick, we can increase the concentration of the fluorophore, decrease the concentration of the hydrogen peroxide, and use a more efficient fluorophore.
These approaches can be combined to achieve the desired level of brightness and duration of the glow stick.
To know more about brighter visit;
brainly.com/question/12532017
#SPJ11
Which structure in the box below matches the IR spectrum below? XL A D H LOH OH E CH3 B F H CH3 CH3CH₂CH₂CH₂C=CH C CH3 -CEN G J NH₂
22 23 24 25 26 27 3 mum 25 00 4400 4300 400 30000 3400 300
Structure D is the correct structure. The IR spectrum of a compound shows the peaks of functional groups present in the compound.
The functional group peaks in the given IR spectrum are:
- A broad peak at around 3400 cm⁻¹ corresponds to the -OH group of an alcohol.
- A sharp peak at around 3000 cm⁻¹ corresponds to the =C-H group of an alkene.
- A peak at around 4400 cm⁻¹ corresponds to the -NH₂ group of an amine.
The structure that matches the IR spectrum is structure D. This is because it contains an -OH group (peak at 3400 cm⁻¹), a =C-H group (peak at 3000 cm⁻¹) and no -NH₂ group (no peak at 4400 cm⁻¹). Therefore, the long answer is:
The structure in the box that matches the IR spectrum given below is structure D. This is because the IR spectrum shows the peaks of functional groups present in the compound, and the peaks in the given IR spectrum correspond to the -OH group (broad peak at around 3400 cm⁻¹) and =C-H group (sharp peak at around 3000 cm⁻¹) of an alcohol and an alkene respectively. Structure D contains an -OH group and a =C-H group, and no -NH₂ group (no peak at 4400 cm⁻¹), which matches the peaks observed in the IR spectrum.
Therefore, structure D is the correct structure.
To know more about IR spectrum, refer
https://brainly.com/question/21134950
#SPJ11
Draw the ABCD steroid ring nucleus and name 3 cholesterol
derivatives.
The ABCD steroid ring nucleus consists of 17 carbon atoms and is classified into four rings A, B, C, and D.
The four rings are fused together with various functional groups.
The following is the structure of the ABCD steroid ring nucleus:
[tex]H_3C[/tex] - [tex]C_1[/tex] - [tex]C_2[/tex] - [tex]C_3[/tex] - [tex]C_4[/tex] - [tex]C_5[/tex] - [tex]C_6[/tex] - [tex]C_7[/tex] - [tex]C_8[/tex] - [tex]C_9[/tex] - [tex]C_{10}[/tex] - [tex]C_{11}[/tex] - [tex]C_{12}[/tex] - [tex]C_{13}[/tex] - [tex]C_{14}[/tex] - [tex]C_{15}[/tex] - [tex]C_{16}[/tex] - [tex]CH_3[/tex]
The three cholesterol derivatives are as follows:
1. Cholecalciferol: It is derived from cholesterol and is known as vitamin D3. This vitamin is necessary for the absorption of calcium and phosphorus in the body. It is obtained from dietary sources or through sun exposure.
2. Progesterone: It is a hormone synthesized from cholesterol and is involved in the regulation of the menstrual cycle and the development of the uterus.
3. Testosterone: It is an androgen hormone synthesized from cholesterol that is involved in the development of secondary sexual characteristics in males. It is also responsible for maintaining the male reproductive system.
To know more about nucleus consists visit:
https://brainly.com/question/27870183
#SPJ11
What is the name of the molecule shown below?
O A. 3-octyne
O B. 3-octene
O C. 2-octene
D. 2-octyne
If I only have one molecule of triglycerides and I need to form glucose, I can do it directly through: A) Glucose 6-phosphate с E Glycerol and Dihydroxyacetone phosphate OAA FINISH Acetyl-COA (either
If you have one molecule of triglycerides and you need to form glucose, you can do it indirectly through glycerol and dihydroxyacetone phosphate.
To form glucose from triglycerides, the molecule would need to undergo a process called gluconeogenesis. Gluconeogenesis is the synthesis of glucose from non-carbohydrate precursors, such as certain amino acids, lactate, and glycerol.
In the case of triglycerides, the molecule can be broken down into glycerol and fatty acids. Glycerol, which is a three-carbon molecule, can enter the gluconeogenesis pathway and be converted into dihydroxyacetone phosphate (DHAP), a key intermediate in glucose synthesis. DHAP can then be converted into glucose 6-phosphate (G6P), which is an important step in glucose metabolism.
Therefore, the correct option is E) Glycerol and Dihydroxyacetone phosphate. By utilizing these intermediates, the body can indirectly convert the triglyceride molecule into glucose through gluconeogenesis. It's important to note that the fatty acids derived from triglycerides cannot be directly converted into glucose but can be used as an energy source through processes like beta-oxidation.
Learn more about Glycerol here:
https://brainly.com/question/13275416
#SPJ11
What is the value of the equilibrium constant for the
conjugate acid, K., for a base that has a Kg = 5,28 x10-h
O 1.00x 10-14
O 1.89 x 10-6
O 6.46 x 10
0 249 x 10-5
The value of the equilibrium constant for the conjugate acid (Kₐ) is 1.89 x 10^-6.
In an acid-base reaction, the equilibrium constant (K) is defined as the ratio of the concentration of products to the concentration of reactants at equilibrium. For a weak base and its conjugate acid, the equilibrium constant is given by the expression:
K = [conjugate acid] / [base]
Given that the value of K for the base (K_b) is 5.28 x 10^-11, we can use the relationship between K_b and Kₐ, which is given by the equation:
K_b × Kₐ = 1.00 x 10^-14
Rearranging the equation, we find:
Kₐ = 1.00 x 10^-14 / K_b
Substituting the given value for K_b, we get:
Kₐ = 1.00 x 10^-14 / (5.28 x 10^-11) = 1.89 x 10^-6
Therefore, the value of the equilibrium constant for the conjugate acid (Kₐ) is 1.89 x 10^-6.
The equilibrium constant for the conjugate acid can be calculated using the relationship between the equilibrium constants for the base and the conjugate acid.
By dividing the value of 1.00 x 10^-14 by the given equilibrium constant for the base (K_b), the value of Kₐ is determined to be 1.89 x 10^-6. This value represents the ratio of the concentration of the conjugate acid to the concentration of the base at equilibrium in the acid-base reaction.
Learn more about equilibrium constant here https://brainly.com/question/29809185
#SPJ11
Select all true statements about the Diels-Alder reaction. The product is a ring. A dienophile is the electrophile. A diene is the nucleophile. The product can have up to 4 contiguous stereocenters.
The true statements about the Diels-Alder reaction are that the product is a ring and a dienophile is the electrophile.
The Diels-Alder reaction is a cycloaddition reaction that involves the reaction between a diene and a dienophile. The reaction typically forms a cyclic compound, hence the statement that the product is a ring is true.
In the reaction, the dienophile acts as the electrophile, meaning it accepts electron density during the reaction, while the diene provides the electron density and acts as the nucleophile. Therefore, the statement that a diene is the nucleophile is incorrect.
Regarding the number of stereocenters in the product, it is not determined by the Diels-Alder reaction itself. The product's stereochemistry depends on the specific reactants used and the orientation of the diene and dienophile during the reaction.
It is possible for the product to have up to 4 contiguous stereocenters, but this is not a general characteristic of the Diels-Alder reaction. The formation of stereocenters in the product is influenced by factors such as the geometry of the diene and dienophile, the reaction conditions, and any pre-existing chiral centers present in the reactants.
Learn more about electrophile here:
https://brainly.com/question/31025261
#SPJ11
1. How many moles of oxygen gas are needed to completely react with
1.34 moles of hydrogen gas?
2. How many
atoms are in 7.01 x 10²² moles of nitrogen gas?
3. How many
moles of oxygen are in
Question 1: To completely react with 1.34 moles of hydrogen gas, 0.67 moles of oxygen gas are needed.
The balanced chemical equation for the reaction between hydrogen gas (H₂) and oxygen gas (O₂) is:
2H₂ + O₂ → 2H₂O
From the balanced equation, we can see that 2 moles of hydrogen gas react with 1 mole of oxygen gas to produce 2 moles of water. Therefore, the mole ratio between hydrogen and oxygen is 2:1.
Given that we have 1.34 moles of hydrogen gas, we can determine the required amount of oxygen gas using the mole ratio. Since the ratio is 2:1, we divide 1.34 by 2 to get 0.67 moles of oxygen gas needed to completely react with the given amount of hydrogen gas.
Question 2: There are 4.21 x 10²³ atoms in 7.01 x 10²² moles of nitrogen gas.
Avogadro's number (6.022 x 10²³) represents the number of particles (atoms, molecules, ions) in one mole of a substance. Therefore, to determine the number of atoms in a given amount of substance, we multiply the number of moles by Avogadro's number.
In this case, we have 7.01 x 10²² moles of nitrogen gas. Multiplying this value by Avogadro's number gives us the total number of atoms:
7.01 x 10²² moles x (6.022 x 10²³ atoms/mole) = 4.21 x 10²³ atoms
Thus, there are 4.21 x 10²³ atoms in 7.01 x 10²² moles of nitrogen gas.
Question 3: There are 7.4 moles of oxygen in 7.4 moles of calcium carbonate.
In the chemical formula for calcium carbonate (CaCO₃), there is one atom of calcium (Ca), one atom of carbon (C), and three atoms of oxygen (O).
Given that we have 7.4 moles of calcium carbonate, we can determine the number of moles of oxygen by multiplying the number of moles of calcium carbonate by the mole ratio of oxygen to calcium carbonate. Since the mole ratio of oxygen to calcium carbonate is 3:1 (from the formula CaCO₃), the number of moles of oxygen is the same as the number of moles of calcium carbonate.
Therefore, there are 7.4 moles of oxygen in 7.4 moles of calcium carbonate.
To know more about hydrogen gas, refer here:
https://brainly.com/question/32820779#
#SPJ11
Complete question:
1. How many moles of oxygen gas are needed to completely react with 1.34 moles of hydrogen gas?
2. How many atoms are in 7.01 x 10²² moles of nitrogen gas?
3. How many moles of oxygen are in 7.4 moles of calcium carbonate?
From the equilibrium concentrations given, calculate Ka for each
of the weak acids and Kb for each of the weak bases. (a) CH3CO2H:
[H3O+] = 1.34 × 10−3 M; [CH3CO2−] = 1.34 × 10−3 M; [CH3CO2H]
To calculate the acid dissociation constant (Ka) for the weak acid CH3CO2H and the base dissociation constant (Kb) for the corresponding conjugate base CH3CO2-, the equilibrium concentrations provided are used: [H3O+] = 1.34 × 10^-3 M, [CH3CO2-] = 1.34 × 10^-3 M, and [CH3CO2H].
The values of Ka and Kb can be determined using the equilibrium expression and the given concentrations.
For the weak acid CH3CO2H, the equilibrium expression for the dissociation is:
CH3CO2H ⇌ H3O+ + CH3CO2-
The equilibrium constant Ka is given by the equation:
Ka = [H3O+] * [CH3CO2-] / [CH3CO2H]
Given the concentrations [H3O+] = 1.34 × 10^-3 M and [CH3CO2-] = 1.34 × 10^-3 M, and assuming the initial concentration of CH3CO2H to be x, the equilibrium concentration of CH3CO2H will also be x.
Plugging in the values into the equation, we have:
Ka = (1.34 × 10^-3) * (1.34 × 10^-3) / x
To solve for x, we need additional information or an expression for the initial concentration of CH3CO2H. Without this information, we cannot calculate the exact value of Ka.
Similarly, for the conjugate base CH3CO2-, the equilibrium expression for the dissociation is:
CH3CO2- + H2O ⇌ CH3CO2H + OH-
The equilibrium constant Kb is given by the equation:
Kb = [CH3CO2H] * [OH-] / [CH3CO2-]
However, without the concentration of OH- or an expression for the initial concentration of CH3CO2-, we cannot calculate the exact value of Kb.
Therefore, with the given information, we are unable to calculate the specific values of Ka and Kb for CH3CO2H and CH3CO2-, respectively.
Learn more about acid dissociation here :
https://brainly.com/question/15012972
#SPJ11
2.25 kg of a fluid having a volume of 0.1 m³ are contained in a cylinder at constant pressure of 7 bar. Heat energy is supplied to the fluid until the volume becomes 0.2 m³. If the initial and final specific enthalpies of the fluid are 210 kJ/kg and 280 kJ/kg respectively, determine, (a) the quantity of heat energy supplied to the fluid, (b) the change in internal energy of the fluid. (157.5 kJ, 87.5 kJ ) A mixture of gas expands from 0.03 m³ to 0.06 m³ at a constant pressure of 1MPa and absorbs 84 kJ of heat during the process. What is the change in internal energy of the mixture? (54 kJ)
(a) The quantity of heat energy supplied to the fluid is 157.5 kJ.
(b) The change in internal energy of the fluid is 87.5 kJ.
(a) The quantity of heat energy supplied to the fluid is 157.5 kJ.
We can use the equation:
Q = m * (h2 - h1)
Where:
Q is the heat energy supplied to the fluid
m is the mass of the fluid
h2 is the final specific enthalpy of the fluid
h1 is the initial specific enthalpy of the fluid
Given:
m = 2.25 kg
h1 = 210 kJ/kg
h2 = 280 kJ/kg
Substituting the values into the equation, we have:
Q = 2.25 kg * (280 kJ/kg - 210 kJ/kg)
= 2.25 kg * 70 kJ/kg
= 157.5 kJ
Therefore, the quantity of heat energy supplied to the fluid is 157.5 kJ.
(b) The change in internal energy of the fluid is 87.5 kJ.
We can use the equation:
ΔU = Q - W
Where:
ΔU is the change in internal energy of the fluid
Q is the heat energy supplied to the fluid
W is the work done by the fluid
Since the problem states that the cylinder is at a constant pressure, the work done by the fluid is given by:
W = P * ΔV
Where:
P is the constant pressure
ΔV is the change in volume of the fluid
Given:
P = 7 bar
ΔV = 0.2 m³ - 0.1 m³ = 0.1 m³
Converting the pressure to kilopascals (kPa):
P = 7 bar * 100 kPa/bar
= 700 kPa
Substituting the values into the equation for work done, we have:
W = 700 kPa * 0.1 m³
= 70 kJ
Now, substituting the values of Q and W into the equation for ΔU, we get:
ΔU = 157.5 kJ - 70 kJ
= 87.5 kJ
Therefore, the change in internal energy of the fluid is 87.5 kJ.
Learn more about change in internal energy here https://brainly.com/question/3453679
#SPJ11
please help
2. What volume of 0.80 M solution of copper (II) chloride, CuCl₂, must you use to prepare 100.0 mL of 0.36 M CuCl₂ solution ? Show setup and calculations in the space in the report sheet provided
the volume of 0.80 M solution of copper (II) chloride, Cu Cl₂, that must be used to prepare 100.0 mL of 0.36 M Cu Cl₂ solution is 45 m L.
The volume of 0.80 M solution of copper (II) chloride, Cu Cl₂, must be used to prepare 100.0 mL of 0.36 M Cu Cl₂ solution can be calculated as follows;
Given; The volume of 0.80 M solution of copper (II) chloride, Cu Cl₂ to be calculated = ?The molarity of 0.80 M solution of copper (II) chloride, Cu Cl₂ = 0.80 M
The volume of 0.80 M solution of copper (II) chloride, Cu Cl₂ required = ?The final volume of Cu Cl₂ solution to be prepared = 100 mL
The final molarity of Cu Cl₂ solution to be prepared = 0.36 M Formula used;M1V1 = M2V2Where;M1 = Initial molarity of the solutionV1 = Initial volume of the solutionM2 = Final molarity of the solutionV2 = Final volume of the solution By substituting the values;M1V1 = M2V2⇒ V1 = (M2V2) / M1⇒ V1 = (0.36 x 100) / 0.80⇒ V1 = 45 mL
Therefore, the volume of 0.80 M solution of copper (II) chloride, Cu Cl₂, that must be used to prepare 100.0 mL of 0.36 M Cu Cl₂ solution is 45 m L.
to know more about molarity visit ;
https://brainly.com/question/19517011
#SPJ11
What determines the physical properties of a
substance?
Group of answer choices
Ionic bonding
Metallic bonding
Covalent bonding
Intermolecular forces
Nuclear composition
The physical properties of a substance are determined by intermolecular forces, which include ionic bonding, metallic bonding, covalent bonding, and other factors such as nuclear composition.
The physical properties of a substance are a result of various factors, including the nature of the bonding within the substance and the interactions between its constituent particles. The main determinant of these properties is the type of intermolecular forces present.
1. Ionic bonding: Substances with ionic bonding, such as salts, exhibit high melting and boiling points due to strong electrostatic attractions between positively and negatively charged ions. They are typically brittle and conduct electricity when dissolved in water or molten state.
2. Metallic bonding: Metals possess metallic bonding, where delocalized electrons form a "sea" of mobile charge around positive metal ions. This gives rise to properties such as malleability, high thermal and electrical conductivity, and luster.
3. Covalent bonding: Covalently bonded substances, such as molecular compounds, have relatively lower melting and boiling points compared to ionic compounds. The physical properties of covalent compounds depend on factors like molecular size, polarity, and intermolecular forces like hydrogen bonding or dipole-dipole interactions.
4. Intermolecular forces: These forces, such as van der Waals forces or hydrogen bonding, exist between molecules and affect properties like boiling point, solubility, and viscosity. Stronger intermolecular forces lead to higher boiling points and increased solubility.
5. Nuclear composition: While not directly related to intermolecular forces, the nuclear composition of an element or isotope can impact properties like radioactivity or stability, which can influence physical properties.
In summary, the physical properties of a substance are determined by intermolecular forces, including ionic bonding, metallic bonding, covalent bonding, as well as other factors like the presence of hydrogen bonding or van der Waals forces, and the nuclear composition of the substance.
To know more about ionic bonding click here:
https://brainly.com/question/29772028
#SPJ11
please show steps. thanks!
X A sample of gasoline has a density of 0.718 g/mL. What is the volume of 2.5 kg of gasoline? -6 2.5kg 1,000g 2872 0.718 91 = que
The volume of 2.5 kg of gasoline is approximately 3,472 mL (or 3.472 L).
To calculate the volume of a substance, we can use the formula:
Volume = Mass / Density
In this case, the mass of the gasoline is given as 2.5 kg, and the density is provided as 0.718 g/mL.
First, we need to convert the mass from kilograms to grams:
2.5 kg * 1,000 g/kg = 2,500 g
Next, we can substitute the values into the formula:
Volume = 2,500 g / 0.718 g/mL
To simplify the calculation, we can convert the density from grams per milliliter to grams per liter:
0.718 g/mL * 1,000 mL/L = 718 g/L
Now, we can divide the mass by the density:
Volume = 2,500 g / 718 g/L ≈ 3.472 L
Since 1 liter (L) is equal to 1,000 milliliters (mL), the volume can also be expressed as 3,472 mL.
The volume of 2.5 kg of gasoline is approximately 3,472 mL (or 3.472 L). This calculation is based on the given density of 0.718 g/mL.
By dividing the mass by the density, we can determine the volume of the substance. It is important to ensure consistent units when performing calculations involving density and volume conversions.
Learn more about volume of the substance here https://brainly.com/question/29371598
#SPJ11