Answer:
A.in empty space
Explanation:
Radiant heat creates heath through both convection and radiation. Their purpose is to heat up an environment, aka empty space.
What type of energy transformation happens during photosynthesis?
(select the BEST answer choice
thermal --> radiant
chemical --> radiant
chemical --> thermal
radiant --> chemical
Answer:
radiant - chemical is the best answer
What does the reaction rate measure?
Answer:
It's C
Explanation:
cuz im goated
What will happen to the temperature
when KCI is added to water?
Answer:
As potassium chloride (KCl) dissolves in water, the ions are hydrated. ... Ion-dipole forces attract the positive (hydrogen) end of the polar water molecules to the negative chloride ions at the surface of the solid, and they attract the negative (oxygen) ends to the positive potassium ions.
Please help!!
You have 5 moles of marbles. How many marbles is this?
Answer:
The answer is 3.011x^24 marbles
Explanation:
6.022 x 10^23 x 5 = 3.011 x 10^24
A chemical reaction that is expected to form 325.0 gof product only forms 123.8 g of product. What is the percent yield of this reaction?
38.1%
61.9%
201.2%
262.5%
Answer:
[tex]\boxed {\boxed {\sf A. \ 38.1 \%}}[/tex]
Explanation:
Percent yield is the ratio of the amount actually produced to how much could theoretically be produced. It is found using this formula:
[tex]\% \ yield = \frac{actual \ yield}{theoretical \ yield} *100[/tex]
For this reaction, the theoretical or expected yield is 325.0 grams. The actual yield is 123.8 grams.
[tex]\% \ yield = \frac{ 123.8 \ g }{325.0 \ g }*100[/tex]
Divide.
[tex]\% \ yield = 0.380923077 *100[/tex]
[tex]\% \ yield = 38.0923077[/tex]
Round to the nearest hundredth. The 9 in the hundredth place tells us to round the 0 to a 1 .
[tex]\% \ yield \approx 38.1[/tex]
The percent yield is about 38.1%
Answer:
38.1%
Explanation:
Magnesium is the limiting reactant in this experiment: Calculate the theoretical yield of MgO for each trial. Determine the percent yield of MgO for each trial. Determine the average percent yield of MgO for both trials.
Answer:
how do u want me to do this
Explanation:
What is the answer to the formula 12+6/2+10?
0 25
O 14
O 19
03.6
The answer was 25
Do according to bodmas rule
Which of the following is NOT an atom that hydrogen bonds?
Select one:
a. Oxygen
b. Nitrogen
c. Fluorine
d. Sodium
Answer:
The answer is D sodium
Explanation:
Sharon puts a large pot of water on the stove to boil pasta. Then she starts to make a tomato sauce. When the sauce is cooking, she looks at the pot of water and thinks the water level is much lower than it was. How does this diagram of part of the water cycle help Sharon explain what happened to the pasta water?
Answer:
1. A
2. C
Explanation:
For the first question, we know that the water transformed into a gas. This fact eliminates choices C and D, primarily because they describe the change as "gas to liquid" instead of liquid to gas.
What separates B from A is that B is saying the liquid changed to a gas in response to sunlight, which is completely false and impertinent to the prompt.
A is the correct answer.
for the second question, we know that condensation causes clouds -- and that neither evaporation nor water vapor would clear clouds to make more of them, which eliminates choices B and D. Going back to condensation, the accumulation of water vapor plays a big role in the formation of clouds. While evaporation does play a part in [it] as well, condensation is what caused the sudden appearance of clouds in the troposphere.
C is the correct answer.
A 4 feet tall student went summing pool. He saw depth of water in pool less than 4 feet.Will he drowned.Write reason
Answer:
Question says , the height of the student = 4 feet, ... This means, if the student goes for swimming in the pool, however he does not know swimming, he will not be drowned until he is suffering from an injury or external force.
What does the illustration indicate?
Answer: A
Explanation:
If the point of the nail can be approximated as a circle with a radius 2.00×10^-3m What is the pressure in MPa exerted on the wall if a hammer strikes the nail with a force of 104 N
Answer:
8.28 MPa
Explanation:
From the question given above, the following data were obtained:
Radius (r) = 2×10¯³ m
Force applied (F) = 104 N
Pressure (P) =?
Next, we shall determine the area of the nail (i.e circle). This can be obtained as follow:
Radius (r) = 2×10¯³ m
Area (A) of circle =?
Pi (π) = 3.14
A = πr²
A = 3.14 × (2×10¯³)²
A = 3.14 × 4×10¯⁶
A = 1.256×10¯⁵ m²
Next, we shall determine the pressure. This can be obtained as follow:
Force applied (F) = 104 N
Area (A) = 1.256×10¯⁵ m²
Pressure (P) =?
P = F / A
P = 104 / 1.256×10¯⁵
P = 8280254.78 Nm¯²
Finally, we shall convert 8280254.78 Nm¯² to MPa. This can be obtained as follow:
1 Nm¯² = 1×10¯⁶ MPa
Therefore,
8280254.78 Nm¯² = 8280254.78 Nm¯² × 1×10¯⁶ MPa / 1 Nm¯²
8280254.78 Nm¯² = 8.28 MPa
Thus, the pressure exerted on the wall is 8.28 MPa
If you tested two samples of a particular pure substance, what would you find?
Answer:
The properties of a pure substance can be used to determine whether a sample is a pure substance or mixture because the characteristic properties of matter can be used to identify a sample. The result is a mixture called a composite.
Explanation:
Pure substances contains their own molecules only and not any impurity. Thus, when we tested it only shows the properties of its own.
What are pure substances?Pure substances are substances containing its pure composition without any impurities. For example water, fruits, acids etc. are pure substances and they does not have a combination other substances.
Mixtures are the combination of two or more pure substances, and the can be heterogenous or homogenous. Whereas, pure substances homogenous only thus forming only one phase.
When we tested mixtures qualitatively, they shows the properties of each individual components in it. Whereas, pure substances give inly its own characteristics.
To find more on pure substances, refer here:
https://brainly.com/question/24462192
#SPJ2
i really need help with this
Answer:
the process shown here is endocytosis.
Explanation:
endocytosis is a process of taking something inside the cell..
Please help asap i really need it
Answer:
decomposers
Explanation:
is it multiple choice
Look carefully at the list of objects and order
them from smallest to largest.
ant
atom
cell
dust particle
ping pong ball
Explain why you have them in this order. Be sure
to use a 5 complete thoughts.
:
Answer:
Atom, cell, dust particle, ant, ping pong ball
Explanation:
Firstly, atoms make up all matter, including each of the items on that list. The only things smaller than atoms are the parts of the atom itself, protons, neutrons and electrons. Because none of those are on that list, atoms have to be the smallest. Next smallest is the cell. Cells are made up of atoms, but they also in part make up dust. You can see a dust particle with the naked eye, but in order to see a cell you must use a microscope. Thus, cells are smaller than dust particles. Next is an ant. Obviously, an ant is bigger than a speck of dust, and is made up of cells and atoms. Lastly all you have is the ping pong ball, which is much larger than the rest of the items. Hope this helps!
All matter, including each thing on the list, is made up of atoms. The protons, neutrons, and electrons that make up an atom are the only particles smaller than atoms.
Thus, Atoms must be the tiniest object because none of those are included in that list. The cell is the next smallest. Atoms make up cells, but dust also makes up a portion of them.
A dust particle can be seen with the unaided eye, but a microscope is required to see a cell.
Cells are hence smaller than dust particles. An ant comes next. Of course, an ant is composed of cells and atoms and is larger than a particle of dust.
Thus, All matter, including each thing on the list, is made up of atoms. The protons, neutrons, and electrons that make up an atom are the only particles smaller than atoms.
Learn more about Atoms, refer to the link:
https://brainly.com/question/1566330
#SPJ2
chemical composition of the gas in LPG cylinder??
LPG is composed hydrocarbons containing three or four carbon atoms. The normal components of LPG thus, are propane (C3H8) and butane (C4H10). Small concentrations of other hydrocarbons may also be present.
what is the meaning of resolution in science?
help me please
100% verified brainly answers to give me please.
Answer:
Resolution is the ability to distinguish two objects from each other. Light microscopy has limits to both its resolution and its magnification.
How is humility related to air pressure
Answer: Edmentum question:
The following graph shows the barometric pressure over the course of the day in Bellingham. What effect will this trend likely have on cloud cover and precipitation over the city?
a scatter plot showing the barometric pressure of an area, with air pressure on the y-axis and time on the x-axis
Explanation: edmentum answer:
In the graph, barometric pressure is decreasing. The drop in pressure represents a low-pressure system. This type of system will cause an increase in cloud cover and precipitation.
Our current model of a chemical bond is to think of it as an electrical interaction between what two parts of an atom
Answer:
Explanation:
It involves the thinking of it as an electrical interaction between the positively charged part of an atom and the negatively charged part as well. Succinctly put, the interaction between the proton of an atom and the electron of an atom.
The relationship between these two sub atomic particles is one of the basis for many chemical bonding, and this is inclusive of all the bonds there exist. Hydrogen, Electrovalent and even Covalent bondings to mention but a few
Convert 6.24 x 10g to standard notation.
Answer:
3.45 x 10^5
Explanation:
If sperm and egg cells have half of the number of chromosomes found in other body cells, how do gametes form?
the ____metals are in the first column. each of them has full shells, plus one extra electron sitting in a new, outer shell
A) Alkali
B) Alkali Earth
C) Arthropod
Answer:
The answer is A.
Explanation:
In periodic table, group 1 (1st column) are Alkali metals and group 2 (2nd column) are Alkali Earth metals.
what is the answer to this
Answer:
Explanation:
i may be wrong but i think its b
Answer:
B Ndaira is right for real
Question 8
Using Henry's Law: Sz/P1-S2/P2
To increase the solubility of a gas at constant temperature and 202kPa pressure from
0.85g/L to 5.1g/L, the pressure would have to be increased to:
A.505kPa
B.17.2kPa
C.606kPa
D.1212kPa
Answer:
D
Explanation:
plug the numbers
Do you think a chemical reaction occurs every time two substances are placed together in a reaction vessel?
Answer:
Not necessarily.
Explanation:
What molecular geometry would be expected for BF3 and NH3?
Answer:
Boron trifluoride would have a trigonal planar geometry.Ammonia would have a trigonal pyramidal geometry.Explanation:
There are three valence electrons in a boron atom.
In boron trifluoride, the central boron atom did not achieve an octet with eight valence electrons. Rather, that boron atom would be electron deficient with only six valence electrons.
Each of the three fluoride atoms would have shared one valence electron with that boron atom, with a total of three boron-fluorine single bonds. On the other hand, all three of the valence electrons of that boron atom would be involved in bonding. Hence, there would be no extra valence electrons to act as lone pairs on that boron atom.
Hence, the central boron atom would have three electron domains (one for each boron-fluorine bond) with none of the electron domains coming from lone pairs. By the VSEPR theory, the geometry of the molecule would be trigonal planar. All four atoms in this molecule would be in the same plane.
There are five valence electrons in a nitrogen atom.
In ammonia, the central nitrogen atom is indeed able to achieve an octet (with eight valence electrons in total.) Three of the five valence electrons of nitrogen would form a total of three hydrogen-nitrogen bonds. The other two valence electrons would form a lone pair.
Hence the central nitrogen atom would have four electron domains (one for each of the three hydrogen-nitrogen bond, and one for the lone pair.) Hence, by the VSEPR theory, the geometry of this molecule would be trigonal pyramidal.
In the chemical equation, H202-H2O + O2, the H2O2 is a
reactant
catalyst
product
solid
Answer:
product
Explanation:
Which energy transformation describes what occurs in a circuit? (select
the BEST answer)
chemical --> electrical --> light
thermal --> chemical --> light
electrical --> thermal --> light
Olight --> thermal --> chemical
Answer:
electrical --> thermal --> light
Explanation:
Answer:
electrical--> thermal--> light
list 10 uses of composite
Aerospace
Thermoset composites are being specified for wings, fuselages, bulkheads, and other applications in commercial, civilian and military aerospace applications.
Appliance/Business
Thermoset composite are being used in frames, equipment panels, handles and trims in appliances, power tools, business equipment and many other applications.
Thermoset composites for the appliance industry are used in washers, dryers, refrigerators, freezers, ranges, ovens, dishwashers for components that include control panels, handles, knobs, vent trims, side trims, motor housings, kick plates and many others.
Automotive/Transportation/Farm/Construction
Composites are now being used in vehicle and equipment applications, including, panels, frames, interior components and other parts.
Civil Infrastructure
Some composite infrastructure applications include buildings, roads, bridges and pilings.
Construction
Thermoset composites are replacing many traditional materials for home and offices architectural components including fixtures, doors, wall panels, roofing, window frames, moulding, vanity sinks, shower stalls and even swimming pools.
Corrosive Environments
Composites are ideal for applications in corrosive environments, such as chemical processing plants, pulp and paper converting, oil and gas refineries and water treatment facilities. Common applications include fans, grating, tanks, ducts, hoods, pumps and cabinets.
Electrical
With strong dielectric properties including arc and track resistance, Thermoset components include substation equipment, microwave antennas, standoffs and pole line hardware and printed wiring boards. Applications and components include switchgear, motor controls, standoff insulators, control system components, circuit breakers, arc chutes, arc shields, terminal blocks, terminal boards, metering devices, bus supports and lighting components.
Marine
With their corrosion resistance and light-weighting attributes, Marine composite applications include boat hulls, bulkheads and other components for military, commercial and recreational boats and ships.