Receiver maxima problem. When the receiver moves through one cycle, how many maxima of the standing wave pattern does the receiver pass through

Answer:

    I₂ = 0.25 I₀

Explanation:

To know the light transmitted by a filter we must use the law of Malus

          I = I₀ cos² θ

In this case, the intensity of the light that passes through the first polarizer is I₀, it reaches the second polarized, which is at 45⁰, therefore the intensity I1 comes out of it.

        I₁ = I₀ cos² 45

        I₁ = I₀ 0.5

this is the light that reaches the third polarizer, which is at 45⁰ with respect to the second, from this comes the intensity I₂

       I₂ = I₁ cos² 45

       I₂ = (I₀ 0.5) 0.5

       I₂ = 0.25 I₀

this is the intensity of the light transmitted by the set of polarizers

Answer:

I believe it's called rapid growth

Explanation:

that is my answer no matter what

Answer:

1.03A

Explanation:

For computing the magnitude of the current in the circuit we need to do the following calculations

LCR circuit impedance

[tex]Z = \sqrt{R^2 + (X_L - X_c)^2} \\\\ = \sqrt{110^2 + (210 - 110)^2}[/tex]

= 148.7Ω

Now the phase angle is

[tex]\phi = tan^{-1} (\frac{X_L - X_C}{R}) \\\\ = tan^{-1} (\frac{210 - 110}{110})\\\\ = 42.3^{\circ}[/tex]

Now the rms current flowing in the circuit is

[tex]I_{rms} = \frac{V_{rms}}{Z} \\\\ = \frac{146}{148.7}[/tex]

= 0.98 A

The current flowing in the circuit is

[tex]I = I_{rms}\sqrt{2} \\\\ = (0.98) (1.414)[/tex]

= 1.39 A

And, finally, the current across the generator is

[tex]I'= I cos \phi[/tex]

[tex]= (1.39) cos 42.3^{\circ}[/tex]

= 1.03A

Hence, the magnitude of the circuit current is 1.03A

Answer:

constant horizontal force developed in the coupling C = 11.25KN

the friction force developed between the tires of the truck and the road during this time is 33.75KN

Explanation:

See attached file

The friction force between the tires of the truck and the road is 22500 N.

It is given that a 2 Mg truck ( m = 2000 Kg) is initially moving with a speed of u = 15 m/s.

Distance traveled before coming to rest, s = 10m

The final velocity of the truck will be zero, v = 0

When the breaks are applied, only the frictional force is acting on the truck and it is opposite to the motion of the truck.

The frictional force is given by:

f = -ma

the acceleration of the truck = -a

The negative sign indicates that the acceleration is opposite to the motion.

Applying the third equation of motion we get:

v² = u² -2as

0 = 15² - 2×a×10

225 = 20a

a = 11.25 m/s²

So the magnitude of frictional force is:

f = ma = 2000 × 11.25 N

f = 22500 N

Learn more about friction force:

https://brainly.com/question/1714663?referrer=searchResults

Answer:

Support at Cy = 1.3 x 10³ k-N

Support at Ay = 200 k-N

Explanation:

given:

fb = 300 k-N/m

fc = 100 k-N/m

D = 300 k-N

L ab = 6 m

L bc = 6 m

L cd = 6 m

To get the reaction A or C.

take summation of moment either A or C.

Support Cy:

∑ M at Ay = 0

      (( x1 * F ) + ( D * Lab ) + ( D * L bc + D * L cd )

Cy = -------------------------------------------------------------------

                                      ( L ab + L bc )

Cy = 1.3 x 10³ k-N

Support Ay:

Since ∑ F = 0,           A + C - F - D = 0

                                   A = F  + D - C

                                  Ay = 200 k-N

Answer:

i was going to but its to late

Explanation:

Answer:

Explanation:

Let the velocity of astronaut be u and the velocity of flat sheet of metal plate be v . They will move in opposite direction ,  so their relative velocity

= u + v = 2.3 m /s ( given )

We shall apply conservation of momentum law for the movement of astronaut and metal plate

mu  = M v where m is mass of astronaut , M is mass of metal plate

71 u = 230 x v

71 ( 2.3 - v ) = 230 v

163.3 = 301 v

v = .54 m / s

u = 1.76 m / s

honeycomb will be at rest  because honeycomb surface  is frictionless . Plate will slip over it . Over plate astronaut is walking .

a ) velocity of metal sheet relative to honeycomb will be - 1.76 m /s

b ) velocity of astronaut relative to honeycomb will be + .54 m /s

Here + ve direction is assumed to be the direction of astronaut .  

Answer:

The answer is 40 N for APX

Explanation:

Explanation:

proton number + neutron number = atomic mass

30 + 35 = 65

Answer:

Explanation:

The double slit interference phonemene is described for the case of constructive interference

          d sin θ= m λ                   (1)

let's use trigonometry to find the sinus

        tan θ = y / L

in general in interference phenomena the angles are small

       tan θ = sin θ / cos θ = sin θ

The double slit interference phonemene is described for the case of constructive interference

          d sin θ = m lam                    (1)

let's use trigonometry to find the sinus

        tan θ = y / L

in general in interference phenomena the angles are small

       tan θ = sin θ / cos θ = sin θ

we substitute

      sin θ = y / L

we substitute in equation 1

         d y / L = m λ

         λ = dy / L m

let's reduce the magnitudes to the SI system

  d = 0.44 mm = 0.44 10⁻³ m

  y = 5.5 mm = 5.5 10⁻³ m

  L = 4.2m

  m = 1

let's calculate

        λ = 0.44  10⁻³ 5.5 10⁻³ / (4.2 1)

        λ = 5.76190 10-7 m

let's reduce to num

  lam = 5.56190 10-7 m (109 nm / 1m)

  lam = 556,190 nmtea

we substitute

      without tea = y / L

we substitute in equation 1

         d y / L = m lam

         lam = dy / L m

let's reduce the magnitudes to the SI system

  d = 0.44 me = 0.44 10-3 m

  y = 5.5 mm = 5.5 10-3

  L = 4.2m

  m = 1

let's calculate

        lam = 0.44 10⁻³  5.5 10⁻³ / (4.2 1)

        lam = 5.76190 10⁻⁷ m

let's reduce to num

  lam = 5.56190 10⁻⁷ m (109 nm / 1m)

  lam = 556,190 nm

Answer:

gₓ = 6.52 m/s²

Explanation:

The value of acceleration due to gravity on the surface of earth is given as:

g = GM/R²   -------------------- equation 1

where,

g = acceleration due to gravity on surface of earth

G = Universal Gravitational Constant

M = Mass of Earth

R = Radius of Earth

Now, for the alien planet:

gₓ = GMₓ/Rₓ²

where,

gₓ = acceleration due to gravity at the surface of alien planet

Mₓ = Mass of Alien Planet = 2.4 M

Rₓ = Radius of Alien Planet = 1.9 R

Therefore,

gₓ = G(2.4 M)/(1.9 R)²

gₓ = 0.66 GM/R²

using equation 1

gₓ = 0.66 g

gₓ = (0.66)(9.81 m/s²)

gₓ = 6.52 m/s²

Answer:

The magnitude of the net field located at the center of the square is the same in every of arrangement of the charges.

The velocity and force are required.

The speed of the racket is 8.7 m/s

The required force is 471.43 N.

[tex]m_1[/tex] = Mass of racket = 1000 g

[tex]m_2[/tex] = Mass of ball = 60 g

[tex]u_1[/tex] = Initial velocity of racket = 12 m/s

[tex]u_2[/tex] = Initial velocity of ball = -15 m/s

[tex]v_1[/tex] = Final velocity of racket

[tex]v_2[/tex] = Final velocity of ball = 40 m/s

[tex]\Delta t[/tex] = Time = 7 ms

The equation of the momentum will be

[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2\\\Rightarrow v_1=\dfrac{m_1u_1+m_2u_2-m_2v_2}{m_1}\\\Rightarrow v_1=\dfrac{1\times 12+0.06\times (-15)-0.06\times 40}{1}\\\Rightarrow v_1=8.7\ \text{m/s}[/tex]

Force is given by

[tex]F=m_2\dfrac{v_2-u_2}{\Delta t}\\\Rightarrow F=0.06\times \dfrac{40-(-15)}{7\times 10^{-3}}\\\Rightarrow F=471.43\ \text{N}[/tex]

Learn more:

https://brainly.com/question/19689434?referrer=searchResults

Complete Question

The complete question is shown on the first uploaded image  

Answer:

The  wavelength is  [tex]\lambda = 622 nm[/tex]

Explanation:

  From the question we are told that

    The distance of the slit to the screen is  [tex]D = 5 \ m[/tex]

    The order of the fringe is m  =  6

     The distance between the slit is  [tex]d = 0.9 \ mm = 0.9 *10^{-3} \ m[/tex]

    The fringe distance is  [tex]Y = 1.9 \ cm = 0.019 \ m[/tex]

Generally the for a dark fringe the fringe distance is  mathematically represented as

        [tex]Y = \frac{[2m - 1 ] * \lambda * D }{2d}[/tex]

=>     [tex]\lambda = \frac{Y * 2 * d }{[2*m - 1] * D}[/tex]

substituting values

=>      [tex]\lambda = \frac{0.019 * 2 * 0.9*10^{-3} }{[2*6 - 1] * 5}[/tex]

=>     [tex]\lambda = 6.22 *10^{-7} \ m[/tex]

       [tex]\lambda = 622 nm[/tex]

Answer:

The unit of work is joules

Force and displacement are used to calculate the work done by an object. This work is measured in the units of Joules. Thus, the correct option is A.

Work can be defined as the force that is applied on an object which shows some displacement. Examples of work done include lifting an object against the Earth's gravitational force, and driving a car up on a hill. Work is a form of energy. It is a vector quantity as it has both the direction as well as the magnitude. The standard unit of work done is the joule (J). This unit is equivalent to a newton-meter (N·m).

The nature of work done by an object can be categorized into three different classes. These classes are positive work, negative work and zero work. The nature of work done depends on the angle between the force and displacement of the object. Positive work is done if the applied force displaces the object in its direction, then the work done is known as positive work. Negative work is opposite of positive work as in this work, the applied force and displacement of the object are in opposite directions to each other and zero work is done when there is no displacement.

Therefore, the correct option is A.

Learn more about Work here:

https://brainly.com/question/18094932

#SPJ6

Answer:

λ = 5.2 x 10⁻⁷ m = 520 nm

Explanation:

From Young's Double Slit Experiment, we know the following formula for the distance between consecutive bright fringes:

Δx = λL/d

where,

Δx = fringe spacing = distance of 1st bright fringe from center = 0.00322 m

L = Distance between slits and screen = 3.1 m

d = Separation between slits = 0.0005 m

λ = wavelength of light = ?

Therefore,

0.00322 m = λ(3.1 m)/(0.0005 m)

λ = (0.00322 m)(0.0005 m)/(3.1 m)

λ = 5.2 x 10⁻⁷ m = 520 nm

Answer:

A)   V = -136.36 V , B)  V = 4.85 10³ V , C)  V = 1.62 10⁴ V

Explanation:

To calculate the potential at an external point of the spheres we use Gauss's law that the charge can be considered at the center of the sphere, therefore the potential for an external point is

          V = k ∑ [tex]q_{i} / r_{i}[/tex]

where [tex]q_{i}[/tex] and [tex]r_{i}[/tex] are the loads and the point distances.

A) We apply this equation to our case

          V = k (q₁ / r₁ + q₂ / r₂)

They ask us for the potential at the midpoint of separation

         r = 3.30 / 2 = 1.65 m

this distance is much greater than the radius of the spheres

let's calculate

         V = 9 10⁹ (1.1 10⁻⁸ / 1.65  + (-3.6 10⁻⁸) / 1.65)

         V = 9 10¹ / 1.65 (1.10 - 3.60)

         V = -136.36 V

B) The potential at the surface sphere A

r₂ is the distance of sphere B above the surface of sphere A

              r₂ = 3.30 -0.02 = 3.28 m

              r₁ = 0.02 m

we calculate

             V = 9 10⁹ (1.1 10⁻⁸ / 0.02  - 3.6 10⁻⁸ / 3.28)

             V = 9 10¹ (55 - 1,098)

             V = 4.85 10³ V

C) The potential on the surface of sphere B

      r₂ = 0.02 m

      r₁ = 3.3 -0.02 = 3.28 m

      V = 9 10⁹ (1.10 10⁻⁸ / 3.28  - 3.6 10⁻⁸ / 0.02)

       V = 9 10¹ (0.335 - 180)

       V = 1.62 10⁴ V

Answer:

Option D is the correct option.

Explanation:

Given,

Mass ( m ) = 3 kg

Acceleration due to gravity ( g ) = 9.8 m/s²

Weight ( w ) = ?

Now, let's find the weight :

[tex]w \: = \: m \times g[/tex]

plug the values

[tex] = 3 \times 9.8[/tex]

Multiply the numbers

[tex] = 29.4 \: [/tex] Newton

Hope this helps!!

best regards!!

Answer:

27°

Explanation:

The force is proportional to the sine of the angle between the wire and the magnetic field. (See the ref.)

So theta = arcsin(0.45)

=27°

The angle between the wire and the magnetic field is 27°.

Since The magnetic force per meter on a wire is measured to be only 45 %

So here we know that The force should be proportional to the sine of the angle between the wire and the magnetic field

Therefore,

theta = arcsin(0.45)

=27°

Hence, The angle between the wire and the magnetic field is 27°.

Learn more about wire here: https://brainly.com/question/24733137

Answer:

The longer the cord, the lower the illumination

Explanation:

The illumination provided by the light bulb will be reduced as the length of the extension cord increases. This is because the resistance provided by the wire increases with its length.

Long wires have more electrical resistance than shorter ones.

Let us consider this formula:

Resistance =[tex]\frac{\rho L}{A}[/tex]

From this formula, we can see that as the length increases, the resistance to current flow offered by the wire increases also provided the resistivity and cross-sectional area of the wire remain constant. As a result of this, the illumination will drop.

Answer:

Explanation:

According to first law of thermodynamics:

∆U= q + w

= 10kj+(-70kJ)

-60kJ

, w = + 70 kJ

(work done on the system is positive)

q = -10kJ ( heat is given out, so negative)

∆U = -10 + (+70) = +60 kJ

Thus, the internal energy of the system decreases by 60 kJ.

Answer:

The  angular acceleration is [tex]\alpha = 0.4418 \ rad /s^2[/tex]

Explanation:

From the question we are told that

      The  angular speed is [tex]w_f = 45 \ rev / minutes = \frac{45 * 2 * \pi }{60 }= 4.713 \ rad/s[/tex]

       The  angular displacement is  [tex]\theta =4 \ rev = 4 * 2 * \pi = 25.14 \ rad[/tex]

From the first equation of motion we can define the movement of the record as

      [tex]w_f ^2 = w_o ^2 + 2 * \alpha * \theta[/tex]

Given that the record started from rest [tex]w_o = 0[/tex]

So

       [tex]4.713^2 = 2 * \alpha * 25.14[/tex]

        [tex]\alpha = 0.4418 \ rad /s^2[/tex]

Answer:

50000 turns

Explanation:

Vp / Vs = Np / Ns

240 / 12000 = 1000 / Ns

Ns = 50000 turns

Answer:

Zack should direct his throw outward and toward the back of the car.

Explanation:

As the car is moving forward, the book will be thrown with a forward component. Therefore, throwing this book backwards at a constant speed would cancel the motion of the car, allowing the book to have a greater chance of ending on the driveway. I say a greater chance as Zack may not have the exact timings as to land the book in his driveway. That too he may not have thrown the book with the right momentum.

The solution is throw 3.

I say a greater chance as Zack may not have the exact timings as to land the book in his driveway. That too he may not have thrown the book with the right momentum as the skydivers.

The statement that best applies Newton’s laws of motion to explain the skydiver’s motion is that an upward force balances the downward force of gravity on the skydiver. Newton's 3rd law often applies to skydiving.

When gravity is not acting upon the skydivers they would continue moving in the direction the vehicle they jumped from was moving. If no air resistance takes place, then the skydivers would still accelerating at 9.8 m/s until they hit the ground.

The skydiver after leaving the aircraft will accelerates downwards due to the force of gravity usually as there is no air resistance acting in the upwards direction, and there is a resultant force acting downwards, the skydiver will accelerates towards the ground.

Therefore, I say a greater chance as Zack may not have the exact timings as to land the book in his driveway. That too he may not have thrown the book with the right momentum as the skydivers.

Learn more about skydiver on:

https://brainly.com/question/29253407

#SPJ6

Answer:

The  voltage is [tex]V_c = 9.92 \ V[/tex]

Explanation:

From the question we are told that

     The voltage of the battery is  [tex]V_b = 24 \ V[/tex]

     The capacitance of the capacitor is  [tex]C = 3.0 mF = 3.0 *10^{-3} \ F[/tex]

     The  resistance of the resistor is [tex]R = 100\ \Omega[/tex]

     The time taken is  [tex]t = 0.16 \ s[/tex]  

Generally the voltage of a charging charging capacitor after time t is mathematically represented as

       [tex]V_c = V_o (1 - e^{- \frac{t}{RC} })[/tex]

Here [tex]V_o[/tex] is the voltage of the capacitor when it is fully charged which in the case of this question is equivalent to the voltage of the battery so  

      [tex]V_c = 24 (1 - e^{- \frac{0.16}{100 * 3.0 *10^{-1}} })[/tex]

      [tex]V_c = 9.92 \ V[/tex]

Answer:

The object with the twice the area of the other object, will have the larger drag coefficient.

Explanation:

The equation for drag force is given as

[tex]F_{D} = \frac{1}{2}pu^{2} C_{D} A[/tex]

where [tex]F_{D}[/tex] IS the drag force on the object

p = density of the fluid through which the object moves

u = relative velocity of the object through the fluid

p = density of the fluid

[tex]C_{D}[/tex] = coefficient of drag

A = area of the object

Note that [tex]C_{D}[/tex] is a dimensionless coefficient related to the object's geometry and taking into account both skin friction and form drag. The most interesting things is that it is dependent on the linear dimension, which means that it will vary directly with the change in diameter of the fluid

The above equation can also be broken down as

[tex]F_{D}[/tex] ∝ [tex]P_{D}[/tex] A

where [tex]P_{D}[/tex] is the pressure exerted by the fluid on the area A

Also note that [tex]P_{D}[/tex] = [tex]\frac{1}{2}pu^{2}[/tex]

which also clarifies that the drag force is approximately proportional to the abject's area.

In this case, the object with the twice the area of the other object, will have the larger drag coefficient.

Answer:

The  induced current is [tex]I = 6.25*10^{-4} \ A[/tex]

Explanation:

From the question we are told that  

    The number of turns is  [tex]N = 1[/tex]

     The  cross-sectional area is  [tex]A = 8.20 cm^2 = 8.20 * 10^{-4} \ m^2[/tex]

    The  initial magnetic field is  [tex]B_i = 0.500 \ T[/tex]

     The  magnetic field at time =  1.02 s  is  [tex]B_t = 2.60 \ T[/tex]

     The  resistance is  [tex]R = 2.70\ \Omega[/tex]

The  induced emf is mathematically represented as

       [tex]\epsilon = - N * \frac{ d\phi }{dt}[/tex]

The  negative sign tells us that the induced emf is moving opposite to the change in magnetic flux

      Here  [tex]d\phi[/tex] is the change in magnetic flux which is mathematically represented as

        [tex]d \phi = dB * A[/tex]

Where  dB  is the change in magnetic field which is mathematically represented as

        [tex]dB = B_t - B_i[/tex]

substituting values

        [tex]dB = 2.60 - 0.500[/tex]

        [tex]dB = 2.1 \ T[/tex]

Thus  

      [tex]d \phi = 2.1 * 8.20 *10^{-4}[/tex]

     [tex]d \phi = 1.722*10^{-3} \ weber[/tex]

So  

     [tex]|\epsilon| = 1 * \frac{ 1.722*10^{-3}}{1.02}[/tex]

     [tex]|\epsilon| = 1.69 *10^{-3} \ V[/tex]

The  induced current i mathematically represented as

      [tex]I = \frac{\epsilon}{ R }[/tex]

  substituting values

       [tex]I = \frac{1.69*10^{-3}}{ 2.70 }[/tex]

       [tex]I = 6.25*10^{-4} \ A[/tex]

Answer:

D

Explanation:

Gravity is the force of attraction between two objects.

Each object creates a gravitational field in wich every other object is affected by it.

Answer:

The weight of the rod is 32.87 N

Explanation:

Density of the rod = 7800 kg/m

length of the rod = 81.2 cm = 0.812 m

diameter of rod = 2.60 cm = 0.026 m

acceleration due to gravity = 9.80 m/s^2

The rod can be assumed to be a cylinder.

The volume of the rod can be calculated as that of a cylinder, and can be gotten as

V = [tex]\frac{\pi d^{2} l}{4}[/tex]

where d is the diameter of the rod

l is the length of the rod

V = [tex]\frac{3.142* 0.026^{2}* 0.812}{4}[/tex] = 4.3 x 10^-4 m^3

We know that the mass of a substance is the density times the volume i.e

mass m = ρV

where ρ is the density of the rod

V is the volume of the rod

m = 4.3 x 10^-4 x 7800 = 3.354 kg

The weight of a substance is the mass times the acceleration due to gravity

W = mg

where g is the acceleration due to gravity g = 9.80 m/s^2

The weight of the rod W = 3.354 x 9.80 = 32.87 N

Answer:

The magnitude of the net gravitational force exerted by these objects on a 42.0-kg object is 1.818 x 10⁻⁷ N

Explanation:

Given;

first object with mass, m₁ = 285 kg

second object with mass, m₂ = 585 kg

distance between the two objects, r = 4.3 m

The midpoint between the two objects = r/₂ = 4.3 /2 = 2.15 m

Gravitational force between the first object and the 42 kg object;

[tex]F = \frac{GMm}{r^2}[/tex]

where;

G = 6.67 x 10⁻¹¹ Nm²kg⁻²

[tex]F = \frac{6.67*10^{-11} *285*42}{2.15^2} \\\\F = 1.727*10^{-7} \ N[/tex]

Gravitational force between the second object and the 42 kg object

[tex]F = \frac{6.67*10^{-11} *585*42}{2.15^2} \\\\F = 3.545*10^{-7} \ N[/tex]

Magnitude of net gravitational force exerted on 42kg object;

F = 3.545x 10⁻⁷ N  -  1.727 x 10⁻⁷ N

F = 1.818 x 10⁻⁷ N

Therefore, the magnitude of the net gravitational force exerted by these objects on a 42.0-kg object is 1.818 x 10⁻⁷ N

Answer:

The expected year is 2017.

Explanation:

Total years that the millionaire to live = 15 years

Travel away from the earth at  = 0.8 c

This is a time dilation problem so if she travels at 0.8 c then her time will pass at slower. Below is the following calculation:

[tex]T = \frac{T_o}{ \sqrt{1-\frac{V^2}{c^2}}} \\T = \frac{15}{ \sqrt{1-\frac{0.8^2}{c^2}}} \\T = 25 years[/tex]

Thus the doctors are expecting to celebrate in the year, 1992 + 25 = 2017