Answer:
6.69 m/s
4.483 m
1.42s
Explanation:
Given that:
Initial Velocity, u = 0
Final velocity, v =?
Acceleration, a = 35m/s²
1.) using the relation :
v² = u² + 2as
v² = 0 + 2(35) * 64*10^-2m
v² = 70 * 0.64
v = sqrt(44.8)
v = 6.693
v = 6.69 m/s
B.) height from the ground, h0 = 2.2
How high ball went , h:
Using :
v² = u² + 2as
Upward motion, g = - ve
0 = 6.69² + 2(-9.8)*(h - 2.2)
0= 6.69² - 19.6(h - 2.2)
44.7561 + 43.12 - 19.6h = 0
19.6h = 44.7561 - 43.12
h = 87.8761 / 19.6
h = 4.483 m
C.)
vt - 0.5gt² = h - h0
6.69t - 0.5(9.8)t²
6.69t - 4.9t² = 1.83 - 2.2
-4.9t² + 6.69t + 0.37 = 0
Using the quadratic equation solver :
Taking the positive root:
1.4185 = 1.42s
what is momentum of a train that is 60,000 kg that is moving at velocity of 17m/s?
explain your answer
He throws a second ball (B2) upward with the same initial velocity at the instant that the first ball is at the ceiling. c. How long after the second ball is thrown do the two balls pass each other? d. When the balls pass each other how far are they above the juggler’s hands? e. When they pass each other what are their velocities?
Answer:
hello your question has some missing parts
A juggler performs in a room whose ceiling is 3 m above the level of his hands. He throws a ball vertically upward so that it just reaches the ceiling.
answer : c) 0.39 sec
d) 2.25 m
e) 1.92 m/sec
Explanation:
The initial velocity of the first ball = 7.67 m/sec ( calculated )
Time required for first ball to reach ceiling = 0.78 secs ( calculated )
Determine how long after the second ball is thrown do the two balls pass each other
Distance travelled by first ball downwards when it meets second ball can be expressed as : d = 1/2 gt^2 = 9.8t^2 / 2
hence d = 4.9t^2 ----- ( 1 )
Initial speed of second ball = first ball initial speed = 7.67 m/sec
3 - d = 7.67t - 4.9t ---- ( 2 )
equating equation 1 and 2
3 = 7.67t therefore t = 0.39 sec
Determine how far the balls are above the Juggler's hands ( when the balls pass each other )
form equation 1 ;
d = 4.9 t^2 = 4.9 *(0.39)^2 = 0.75 m
therefore the height the balls are above the Juggler's hands is
3 - d = 3 - 0.75 = 2.25 m
determine their velocities when the pass each other
velocity = displacement / time
velocity = d / t = 0.75 / 0.39 sec = 1.92 m/sec
Does changing the height of point C affect the speed of the coaster car at point D?
Without friction, NO.
The speed at D depends only on the difference in height between A and D. Whatever happens between them doesn't matter.
The speed of the coaster car at point D will be affected if the height of point C is changed.
Potencial Energy:
It is the enrgy in a body due to the position of differnt part of the object or system.
As we increase the the hight of the car the potetial enrgy increase, the gravitational acceleration on car will be more due to the high of the point C.
Therefore, the speed of the coaster car at point D will be affected if the height of point C is changed.
To know more about speed of the coaster car,
https://brainly.com/question/9178285
According to Newton's law of universal gravitation, which statements are true?
As we move to higher altitudes, the force of gravity on us decreases.
O As we move to higher altitudes, the force of gravity on us increases,
O As we gain mass, the force of gravity on us decreases.
O Aswe gain mass, the force of gravity on us increases.
DAs we move faster, the force of gravity on us increases.
Energy from the Sun is transferred from the Earth’s surface to the atmosphere, resulting in
atmospheric convection currents that produce winds. How do physical properties of the air
contribute to convection currents?
a -The warmer air sinks because it is more dense than cooler air.
b -The warmer air rises because it is more dense than cooler air.
c- The warmer air sinks because it is less dense than cooler air.
d -The warmer air rises because it is less dense than cooler air.
g Incandescent bulbs generate visible light by heating up a thin metal filament to a very high temperature so that the thermal radiation from the filament becomes visible. One bulb filament has a surface area of 30 mm2 and emits 60 W when operating. If the bulb filament has an emissivity of 0.8, what is the operating temperature of the filament
Answer:
2577 K
Explanation:
Power radiated , P = σεAT⁴ where σ = Stefan-Boltzmann constant = 5.6704 × 10⁻⁸ W/m²K⁴, ε = emissivity of bulb filament = 0.8, A = surface area of bulb = 30 mm² = 30 × 10⁻⁶ m² and T = operating temperature of filament.
So, T = ⁴√(P/σεA)
Since P = 60 W, we substitute the vales of the variables into T. So,
T = ⁴√(P/σεA)
= ⁴√(60 W/(5.6704 × 10⁻⁸ W/m²K⁴ × 0.8 × 30 × 10⁻⁶ m²)
= ⁴√(60 W/(136.0896 × 10⁻¹⁴ W/K⁴)
= ⁴√(60 W/(13608.96 × 10⁻¹⁶ W/K⁴)
= ⁴√(0.00441 × 10¹⁶K⁴)
= 0.2577 × 10⁴ K
= 2577 K
A 2028 kg Oldsmobile traveling south on Abbott Road at 14.5 m/s is unable to stop on the ice covered intersection for a red light at Saginaw Street. The car collides with a 4146 kg truck hauling animal feed east on Saginaw at 9.7 m/s. The two vehicles remain locked together after the impact. Calculate the velocity of the wreckage immediately after the impact. Give the speed for your first answer and the compass heading for your second answer. (remember, the CAPA abbreviation for degrees is deg) -1.75
Answer:
v = 8.1 m/s
θ = -36.4º (36.4º South of East).
Explanation:
Assuming no external forces acting during the collision (due to the infinitesimal collision time) total momentum must be conserved.Since momentum is a vector, if we project it along two axes perpendicular each other, like the N-S axis (y-axis, positive aiming to the north) and W-E axis (x-axis, positive aiming to the east), momentum must be conserved for these components also.Since the collision is inelastic, we can write these two equations for the momentum conservation, for the x- and the y-axes:We can go with the x-axis first:[tex]p_{ox} = p_{fx} (1)[/tex]
⇒ [tex]m_{tr} * v_{tr}= (m_{olds} + m_{tr}) * v_{fx} (2)[/tex]
Replacing by the givens, we can find vfx as follows:[tex]v_{fx} = \frac{m_{tr}*v_{tr} }{(m_{tr} + m_{olds)} } = \frac{4146kg*9.7m/s}{2028kg+4146 kg} = 6.5 m/s (3)[/tex]
We can repeat the process for the y-axis:[tex]p_{oy} = p_{fy} (4)[/tex]
⇒[tex]m_{olds} * v_{olds}= (m_{olds} + m_{tr}) * v_{fy} (5)[/tex]
Replacing by the givens, we can find vfy as follows:[tex]v_{fy} = \frac{m_{olds}*v_{olds} }{(m_{tr} + m_{olds)} } = \frac{2028kg*(-14.5)m/s}{2028kg+4146 kg} = -4.8 m/s (6)[/tex]
The magnitude of the velocity vector of the wreckage immediately after the impact, can be found applying the Pythagorean Theorem to vfx and vfy, as follows:[tex]v_{f} = \sqrt{v_{fx} ^{2} +v_{fy} ^{2} }} = \sqrt{(6.5m/s)^{2} +(-4.8m/s)^{2}} = 8.1 m/s (7)[/tex]
In order to get the compass heading, we can apply the definition of tangent, as follows:[tex]\frac{v_{fy} }{v_{fx} } = tg \theta (8)[/tex]
⇒ tg θ = vfy/vfx = (-4.8m/s) / (6.5m/s) = -0.738 (9)
⇒ θ = tg⁻¹ (-0.738) = -36.4º
Since it's negative, it's counted clockwise from the positive x-axis, so this means that it's 36.4º South of East.* Psychology
Match the types of psychoactive drugs to their functions,
depressants
stimulants
amphetamines
hallucinogens
to excite neural activity and temporarily
elevate awareness
to increase dopamine activity and produce
schizophrenic-like paranoid symptoms
>
to inhibit the function of the central nervous
system and neural activity
to distort perceptions and effects on thinking
Answer:
See explanation below
Explanation:
Psychoactive drugs are drugs that affect the central nervous system. They alter cognitive function by changing mood and consciousness.
Examples;
Depressants: Inhibit the function of the central nervous system and neural activity.
Stimulants: Excite neural activity and temporarily elevate awareness.
Amphetamines: Increase dopamine activity and produce schizophrenic-like symptoms.
Hallucinogens: Distort perceptions and effects on thinking.
A drug is any substance that alters how the body functions.
What is a drug?A drug is any substance that alters how the body functions. There are different types of drugs that affect different parts of the body.
We shall now explain the following classifications of drugs;
depressants - to inhibit the function of the central nervousstimulants - elevate awarenesshallucinogens - to distort perceptions and effects on thinkingamphetamines - schizophrenic-like paranoid symptomsLearn more about drugs: https://brainly.com/question/6022349
Anyone can help me out with this question ? Just number 2,
Answer:
- 21⁰C .
Explanation:
Speed of jet = 2.05 x 10³ km /h
= 2050 x 1000 / (60 x 60 ) m /s
= 569.44 m / s
Mach no represents times of speed of sound , the speed of jet
1.79 x speed of sound = 569.44
speed of sound = 318.12 m /s
speed of sound at 20⁰C = 343 m /s
Difference = 343 - 318.12 = 24.88⁰C
We know that 1 ⁰C change in temperature changes speed of sound
by .61 m /s
So a change in speed of 24.88 will be produced by a change in temperature of
24.88 / .61
= 41⁰C
temperature = 20 - 41 = - 21⁰C .
A salmon jumps up a waterfall 2.4 m high. With what minimum speed did the salmon leave the water below to reach the top?
Answer:
6.86 m/s
Explanation:
The minimal velocity needed is when we have only vertical motion, then i will think in the problem only in one axis.
I suppose that the only force, in this case, is the gravitational force acting on the fish.
Then the gravitational equation of the fish will be:
a(t) = -9.8m/s^2
For the velocity equation we need to integrate over time to get:
v(t) = (-9.8m/s^2)*t + v0
Where v0 is the initial velocity of the fish and is what we want to find.
For the position equation we need to integrate over time again to get:
p(t) = (1/2)*(-9.8m/s^2)*t^2 + v0*t + p0
p0 is the initial position of the fish, and because he starts one the water, the initial position is p0 = 0 m
Then the equation is:
p(t) = (1/2)*(-9.8 m /s^2)*t^2 + v0*t
p(t) = (-4.9 m/s^2)*t^2 + v0*t
We know that the maximum height is 2.4m
The value of time at which the fish gets his maximum height is when the velocity of the fish is equal to zero, then we first need to solve:
v(t) = (-9.8m/s^2)*t + v0 = 0
t = v0/9.8m/s^2
Now we replace this in the position equation to get the maxmimum height, which is equal to 2.4m
2.4m = p( v0/9.8m/s^2) = (1/2)*(-9.8 m /s^2)*(v0/9.8m/s^2)^2 + v0*(v0/9.8m/s^2)
2.4m = (1/2)(-v0)^2(-9.8 m /s^2) + v0^2/(9.8m/s^2))
2.4m = (1 - 1/2)*v0^2/(9.8m/s^2)
2.4m = 0.5*v0^2/(9.8m/s^2)
2.4m/0.5 = v0^2/(9.8m/s^2)
4.8m*(9.8m/s^2) = v0^2
√(4.8m*(9.8m/s^2)) = v0 = 6.86 m/s
The _______ changes light energy into nerve signals using receptors called rods and cones. A. retina B. lens C. iris D. pupil
Answer:
A. Retina
Explanation:
a plane passes over Point A with a velocity of 8,000 m/s north. Forty seconds later it passes over Point B with a velocity of 10,000 m/s north. Which is the plane's acceleration from A to B ?
Acceleration = (change in velocity) / (time for the change)
Change in velocity = (ending velocity) - (starting velocity)
Change in the plane's velocity = (10,000 m/s north) - (8,000 m/s north)
Change in the plane's velocity = 2,000 m/s north
Time for the change = 40 seconds
Acceleration = (2,000 m/s north) / (40 seconds)
Acceleration = 50 m/s² north
A solid sphere of radius R = 5 cm is made of non-conducting material and carries a total negative charge Q = -12 C. The charge is uniformly distributed throughout the interior of the sphere.
What is the magnitude of the electric potential V at a distance r = 30 cm from the center of the sphere, given that the potential is zero at r = [infinity] ?
Answer:
V= -3.6*10⁻¹¹ V
Explanation:
Since the charge is uniformly distributed, outside the sphere, the electric field is radial (due to symmetry), so applying Gauss' Law to a spherical surface at r= 30 cm, we can write the following expression:[tex]E* A = \frac{Q}{\epsilon_{0} } (1)[/tex]
At r= 0.3 m the spherical surface can be written as follows:[tex]A = 4*\pi *r^{2} = 4*\pi *(0.3m)^{2} (2)[/tex]
Replacing (2) in (1) and solving for E, we have:[tex]E = \frac{Q}{4*\pi *\epsilon_{0}*r^{2} } = \frac{(9e9N*m2/C2)*(-12C)}{(0.3m)^{2} y} (3)[/tex]
Since V is the work done on the charge by the field, per unit charge, in this case, V is simply:V = E. r (4)Replacing (3) in (4), we get:[tex]V =E*r = E*(0.3m) = \frac{(9e9N*m2/C2)*(-12C)}{(0.3m)} = -3.6e11 V (5)[/tex]
V = -3.6*10¹¹ Volts.The electrical potential module will be [tex]-3.6*10^-^1^1 V[/tex]
We can arrive at this answer as follows:
To answer this, we owe Gauss's law. This is because the charge is evenly distributed across the sphere. This will be done as follows:[tex]E*A=\frac{Q}{^E0} \\\\\\A=4*\pi*r^2[/tex]
Solving these equations will have:[tex]E=\frac{Q}{4*\pi*^E0*r^2} \\E= \frac{(9e9N*m2/c2)*(-12C)}{(0.3m)^2y}[/tex]
As we can see, the electric potential is carried out on the field charge. In this case, using the previous equations, we can calculate the value of V as follows:[tex]V=E*r\\V=E*0.3m= \frac{(9e9N*m^2/C2)*(-12C)}{0.3m} \\V= -3.6*10^-^1^1 V.[/tex]
More information about Gauss' law at the link:
https://brainly.com/question/14705081
A fisherman notices that his boat is moving up and down periodically without any horizontal motion, owing to waves on the surface of the water. It takes a time of 2.30 s for the boat to travel from its highest point to its lowest, a total distance of 0.660 m . The fisherman sees that the wave crests are spaced a horizontal distance of 5.50 m apart. How fast are the waves traveling
Answer:
v = 1.2 m/s
Explanation:
The wavelength of the waves is given as the horizontal distance between the crests:
λ = wavelength = 5.5 m
Now, the time period is given as the time taken by boat to move from the highest point again to the highest point. So it will be equal to twice the time taken by the boat to travel from highest to the lowest point:
T = Time Period = 2(2.3 s) = 4.6 s
Now, the speed of the wave is given as:
[tex]v = f\lambda[/tex]
where,
v= speed of wave = ?
f = frequency of wave = [tex]\frac{1}{T} = \frac{1}{4.6\ s} = 0.217\ Hz[/tex]
Therefore,
[tex]v = (0.217\ Hz)(5.5\ m)\\[/tex]
v = 1.2 m/s
A ball having mass 2 kg is connected by a string of length 2 m to a pivot point and held in place in a vertical position. A constant wind force of magnitude 13.2 N blows from left to right. Pivot Pivot F F (a) (b) H m m L L If the mass is released from the vertical position, what maximum height above its initial position will it attain? Assume that the string does not break in the process. The acceleration of gravity is 9.8 m/s 2 . Answer in units of m
Complete Question
A ball having mass 2 kg is connected by a string of length 2 m to a pivot point and held in place in a vertical position. A constant wind force of magnitude 13.2 N blows from left to right. Pivot Pivot F F (a) (b) H m m L L If the mass is released from the vertical position, what maximum height above its initial position will it attain? Assume that the string does not break in the process. The acceleration of gravity is 9.8 m/s 2 . Answer in units of m.What will be the equilibrium height of the mass?
Answer:
[tex]H_m=1.65m[/tex]
[tex]H_E=1.16307m[/tex]
Explanation:
From the question we are told that
Mass of ball [tex]M=2kg[/tex]
Length of string [tex]L= 2m[/tex]
Wind force [tex]F=13.2N[/tex]
Generally the equation for [tex]\angle \theta[/tex] is mathematically given as
[tex]tan\theta=\frac{F}{mg}[/tex]
[tex]\theta=tan^-^1\frac{F}{mg}[/tex]
[tex]\theta=tan^-^1\frac{13.2}{2*2}[/tex]
[tex]\theta=73.14\textdegree[/tex]
Max angle =[tex]2*\theta= 2*73.14=>146.28\textdegree[/tex]
Generally the equation for max Height [tex]H_m[/tex] is mathematically given as
[tex]H_m=L(1-cos146.28)[/tex]
[tex]H_m=0.9(1+0.8318)[/tex]
[tex]H_m=1.65m[/tex]
Generally the equation for Equilibrium Height [tex]H_E[/tex] is mathematically given as
[tex]H_E=L(1-cos73.14)[/tex]
[tex]H_E=0.9(1+0.2923)[/tex]
[tex]H_E=1.16307m[/tex]
A 35 kg box initially sliding at 10 m/s on a rough surface is brought to rest by 25 N
of friction. What distance does the box slide?
Answer:
the distance moved by the box is 70.03 m.
Explanation:
Given;
mass of the box, m = 35 kg
initial velocity of the box, u = 10 m/s
frictional force, F = 25 N
Apply Newton's second law of motion to determine the deceleration of the box;
-F = ma
a = -F / m
a = (-25 ) / 35
a = -0.714 m/s²
The distance moved by the box is calculated as follows;
v² = u² + 2ad
where;
v is the final velocity of the box when it comes to rest = 0
0 = 10² + (2 x - 0.714)d
0 = 100 - 1.428d
1.428d = 100
d = 100 / 1.428
d = 70.03 m
Therefore, the distance moved by the box is 70.03 m.
A chocolate chip cookie is an example of a (2 points) a homogeneous mixture b heterogeneous mixture c suspension d colloid
Answer:
I think it is heterogeneous mixture. have a good day
Answer:
heterogeneous mixture
Explanation:
i took the test
What is displacement?
a. The distance an object travels.
b. The distance between the starting point and the ending point of an object's
journey.
C. The amount of time it takes an object to travel to a destination.
d. The path in which an object travels.
Answer:
displacement is the distance between the starting point and the ending point of an object's journey
The radius of the Sun is 6.96 x 108 m and the distance between the Sun and the Earth is roughtly 1.50 x 1011 m. You may assume that the Sun is a perfect sphere and that the irradiance arriving on the Earth is the value for AMO, 1,350 W/m2. Calculate the temperature at the surface of the Sun.
Answer:
5766.7 K
Explanation:
We are given that
Radius of Sun , R=[tex]6.96\times 10^{8} m[/tex]
Distance between the Sun and the Earth, D=[tex]1.50\times 10^{11}m[/tex]
Irradiance arriving on the Earth is the value for AMO=[tex]1350W/m^2[/tex]
We have to find the temperature at the surface of the Sun.
We know that
Temperature ,T=[tex](\frac{K_{sc}D^2}{\sigma R^2})^{\frac{1}{4}}[/tex]
Where [tex]K_{sc}=1350 W/m^2[/tex]
[tex]\sigma=5.67\times 10^{-8}watt/m^2k^4[/tex]
Using the formula
[tex]T=(\frac{1350\times (1.5\times 10^{11})^2}{5.67\times 10^{-8}\times (6.96\times 10^{8})^2})^{\frac{1}{4}}[/tex]
T=5766.7 K
Hence, the temperature at the surface of the sun=5766.7 K
Which of the following is a mixture?
a air
biron
Chydrogen
d nickel
Answer:
it will option option A hope it helps
which of the following is used to answer scientific questions?
A. Experiments
B. Intuition
C. Opinion polls
D. Imagination
What energy store is in the human
BEFORE he/she lifts the hammer?
I believe the answer would be protentional because they have the potential energy in them to lift the hammer.