Answer:
The answer is 0.17 m/s²Explanation:
The acceleration of an object given it's mass and the force acting on it can be found by using the formula
[tex] a = \frac{f}{m} \\ [/tex]
f is the force
m is the mass
From the question we have
[tex]a = \frac{500}{3000} = \frac{5}{30 } = \frac{1}{6} \\ = 0.166666...[/tex]
We have the final answer as
0.17 m/s²Hope this helps you
In a powder-flavored drink solution, which substance is the solvent?
a. glass
b. flavored powder
c. water
d. sugar
Answer:
c. Water
Explanation:
The solvent is the substance in which a solute is dissolved to make the solution.
In this case, the water is the solvent, the flavored powder is the solute, and the solution is the final drink.
8) Find the X and Y component of 10degree vector that has 5N.
Answer:
Fx = 4.92 [N]
Fy = 0.868 [N]
Explanation:
Let's take the 10 degrees as a measure from the horizontal component to the vector.
Thus taking the components in the X & y axes respectively:
Fx = 5*cos(10) = 4.92 [N]
Fy = 5*sin(10) = 0.868 [N]
A driver in a 500 kg car going 20 m/s sees a large box in the middle of the road 100 meters away. How much net force is required to get the car to stop without hitting the box?
WILL GIVE BRAINLY AND 50 POINTS
Answer:
620
Explanation:
Answer:
100
correct me if I am wrong
Please help me out with my physics
What is the difference between a fact witness and an expert witness?
Answer:
Unlike a fact witness, an expert is entitled to compensation for participation in the case. A key distinction between a fact witness and an expert witness is that an expert witness may provide an opinion. Fact witnesses must limit their testimony to facts in regard to evidence they may have observed or been involved.
Explanation:
there
Answer:
Unlike a fact witness, an expert is entitled to compensation for participation in the case. A key distinction between a fact witness and an expert witness is that an expert witness may provide an opinion. Fact witnesses must limit their testimony to facts in regard to evidence they may have observed or been involved.
Explanation:
E2020
4. Cliff divers at Acapulco jump into the sea from a cliff 36.0m high. At the level of the sea, a rock sticks out a horizontal distance of 6.00m. With what minimum horizontal velocity must the cliff divers leave the top of the cliff if they are to miss the rock?
Answer: 5.5
Explanation: its simply different from the others
An alien spaceship is 300 m above the ground and moving at a constant velocity of 250 m/s upwards. How high above the ground is the ship after 3 seconds?
Answer: 1050 m
Explanation: 300 + 250x3 = 1050.
What do you guys like about school
Answer:
umm.....the teachers and friends
The drama, and friends.
What are 3 parts of daltons atomic theory ?
During a game of marbles, a player is trying to win a 2 g marble that is at rest. The player flicks a 1.25 g marble at a velocity of 8 at the larger marble that is sitting still. After the collision, the smaller marble has a velocity of 1 . What is the velocity of the 2 g marble after the collision? Round your answer to the nearest whole number.
Answer:
4 m/s
Explanation:jus did on edgu 2020
NEED HELP ASAP PLS (with work)
A punt is kicked at an angle of 60 with a speed of 40 m/s, and lands at the same
height from which it was kicked.
How far away will the ball land?
What is the maximum height reached by the ball?
What is the hang time? Total
Answer:
1) The ball will land approximately 141.4 m away from where it was kicked
2) The maximum height reached is approximately 61.22 m
3) The total hang time is approximately 7.07 seconds
Explanation:
First we list out the known parameters
The direction in which the punt is kicked, θ = 60°
The speed with which the punk is kicked, v₀ = 40 m/s
1) The distance away (the range, R) the ball will land is given by the equation;
[tex]R = \dfrac{v_0^2 \times sin(2\cdot \theta)}{g}[/tex]
Where;
g = The acceleration due to gravity = 9.8 m/s²
Substituting the values, gives;
[tex]R = \dfrac{40^2 \times sin(2\times60^{\circ })}{9.8} \approx 141.4 \ m[/tex]
The distance away the ball will land ≈ 141.4 m
2) The maximum height is given m=by the following equation for vertical motion;
(v₀ × sin(θ))² = 2 × g × [tex]h_{max}[/tex]
Obtained from the equation of motion, v² = u² - 2×g×h where at maximum height;
v = 0 at maximum height, the ball stops upward motion
h = Height of motion = [tex]h_{max}[/tex] at maximum height
v, and u are the vertical component of the velocity, v₀
Substituting the values in the equation for the maximum height, gives;
(40 × sin(60))² = 2 × 9.8 × [tex]h_{max}[/tex]
(40 × (√3)/2)² = 1200 = 19.6 × [tex]h_{max}[/tex]
1200 = 19.6 × [tex]h_{max}[/tex]
[tex]h_{max}[/tex] = 1200/19.6 ≈ 61.22 m
The maximum height reached ≈ 61.22 m
3) The time to maximum height is given by the following equation of motion;
[tex]v_y[/tex] = v₀ × sin(θ) - g × t
[tex]v_y[/tex] = 0 at maximum height
We therefore have;
v₀ × sin(θ) = g × t
t = v₀ × sin(θ)/g = 40 × sin(60°)/9.8 = (40 ×(√3)/2)/9.8 = 3.535 seconds
Given that the motion of the ball is symmetrical about the maximum height, we have;
The time from ground level to maximum height = The time from the maximum height back to the ground level
The total time hang time = The time from ground level to maximum height + The time from the maximum height back to the ground level
The total time hang time ≈ 3.535 + 3.535 ≈ 7.07 seconds.
The total time hang time ≈ 7.07 seconds.
HEY CAN ANYONE PLS ANSWER DIS!!!!
Answer:
A) distillation.
Explanation:
Benzene boils at 81∘C while chloroform at about 61∘C. The separation can be done by distillation.
please mark me brainliest! hope this helps, god bless :)
An inclined plane is 10.0 m long and 2.5 m high. What is the mechanical advantage?
Answer:
MA = 4
Explanation:
In order to solve this problem, we must use the definition of the ideal mechanical advantage, which tells us that it is equal to the relationship of the inclined distance over the height with respect to the level of the ground
MA = L / h
where:
MA = mechanical advantage
L = Length of the inclined plane = 10 [m]
h = elevation = 2.5 [m]
MA = 10/2.5
MA = 4
whats an astral projection
Answer:Esotericism
Explanation:
it’s something that’s in intentional out of body experience
Answer:
Astral projection is a term used in esotericism to describe an intentional out-of-body experience that assumes the existence of a soul or consciousness called an "astral body" that is separate from the physical body and capable of travelling outside it throughout the universe.
Explanation:
An electric current of 0.75 A passes through a circuit that has a resistance of 175 12. According to Ohm's law, what is the voltage of the circuit? O A. 176 V O B. 0.004 V O C. 233 V O D. 131 V
Answer:
15.34 i think
Explanation:
A line graph usually reveals a relationship between which factors
Answer:
variables on the horizontal and vertical axis (slope, outliers, +/- correlation, etc)
Explanation:
What are the Differences between ancient and modern astronomy?
Answer:
ancient astronomy is back in the 1600s and is really old and modern astronomy is present and astronomy today
Time period and technology are the main differences between ancient and modern astronomy.
The main differences between ancient and modern astronomy is the era in which they were created and developed. The ancient astronomy developed by Greeks and technology for study is very old. The first documented records of systematic astronomical observations occurs in Assyro-Babylonians around 1000 BCE.
While on the other hand, modern astronomy refers to the astronomy that is developed in this modern period and use advance technology. Modern astronomy includes many elements of the motions as well as characteristics of moving bodies so we can conclude that time period and technology are the main differences between ancient and modern astronomy.
Learn more: https://brainly.com/question/18659457
What are the two parts of an atom?
the nucleus and the proton cloud
the neutron and the electron cloud
the neutron and the proton cloud
the nucleus and the electron cloudWhen an atom that has no charge loses two electrons, it becomes a
positive ion.
negative ion.
positive isotope.
negative isotope.
Answer:
The two main components of an atom are the nucleus and the cloud of electrons
postive ion
Explanation:
your welcome !!
postive ion explation - When an atom that has no charge loses two electrons, it becomes a positive ion. negative ion. positive isotope. negative isotope When an atom that has no charge loses two electrons, it becomes a positive ion.
What layer of atmosphere does planes fly?
Answer: stratosphere
The stratosphere is the second to last layer of atmosphere to the Earth. It is about 40,000 feet above, and this is the range where planes fly. So, the answer is stratosphere.
Hope this helps!
Answer:
stratosphere
Explanation:
Planes fly in the stratosphere of the atmosphere.
The answer to the question is stratosphere.
Okay? Thank you so much for 25 points.
how would the surface tension of water be increased
Answer:
the presence of impurities on the surface of a substance directly affects the surface tension of a liquid
Explanation:
the surface tension of water will increase when highly soluble impurities are added
If m=120kg and a=15m/s2, what is the force
Answer:
F= 1800N
Explanation:
the equation for force is F= ma
so plug in the numbers: F= (120)(15)
solve this to get F= 1800N
tip: don't forget to add the units when writing your answer :)
How to raise the awareness water saving
Answer:Lead by an example
Practice what you preach. You'll never convince anyone to conserve water if you aren't doing it yourself.
Engage with others.
Seek out allies.
Give people a reason to save.
Provide entry-level strategies.
Encourage others to challenge themselves.
Think big.
Choose a monthly focus.
All atoms want to be like which group of atoms?
2. True or false. As a wave travels through a given material its velocity changes.
Answer:
the answer is false
Explanation:
A wave travels at a constant velocity through a given material.
What is the density of a 15 g object that has a volume of 6 cm??
Answer:
2.5 g/cm³
Explanation:
To find density, divide the mass by the volume. In this case, 15 grams divided by 6 cm³ equals 2500 kg/m³, or simplified, 2.5 g/cm³. Hope it helps! To type ³, turn on Num Lock and then press Alt+0179. Have a good day!
Silver has a resistance of 0.0198 ohms. What voltage would produce a current of 250 amps?
Answer:
V= I x R =250 x 0.0198 = 4.95 Volts
Explanation:
The voltage across the resistor is 4.95 Volts.
How do you calculate the voltage?Given that the resistance is 0.0198 ohms and the current flowing through the silver is 250 amps.
The voltage V across the resistor is the product of the current I flowing through the resistors and resistance R.
[tex]V = IR[/tex]
Substituting the values, we get the voltage.
[tex]V = 250 \times 0.0198[/tex]
[tex]V = 4.95 \;\rm V[/tex]
Hence we can conclude that the voltage across the resistor is 4.95 Volts.
To know more about the voltage, follow the link given below.
https://brainly.com/question/238298.
An automobile was moving at 15 m/s and accelerated at 2 m/s2 for 10 s. Which of the following
was its final speed?
Answer:
35 m/s
Explanation:
i know all
What a noncrystalline solid
If there are 60 min in 1hr, and in 1min there are 60 sec; Solve the following problem using dimensional analysis.: 3,800 hrs. to seconds(sec)
PLEASE HELP AND HURRRRY
A package is dropped from a plane flying at a constant speed. Neglecting air resistance, when the package hits the ground the horizontal location of the plane will....
A. Be behind the package
B. Depend on speed of package
C. Be directly over the package
D. Be in front of the package
Answer:
A. Be behind the package