Scott has the following division problem to solve:

25.16⟌145.75

First, he estimates 150 ➗25 = 6
What steps does he need to follow to solve the long division problem?

Answers

Answer 1

The steps that Scott would have to follow in the long division problem include divisions and additions and would result in 5. 793 .

What are the steps to long division ?

Follow these steps to solve the long division problem with 25.16 as divisor and 145.75 as dividend:

Begin by setting up the long division problem using the aforementioned divisor and dividend elements.To simplify the task, multiply both divisor and dividend by 100, eliminating their respective decimal points. The result is a transformed problem of 2516 ⟌ 14575.

Next, perform the long division operation solely utilizing whole numbers:

a) When dividing 14,575 by 2,516 remember that Scott predicts this quotient to be somewhere close to 6.b) Find the value attained through multiplying the estimated quotient (6) with the divisor (2516): 2516 x 6 = 15, 096.c) As the resulting factor is larger than the original dividend number (14, 575), 5 should replace the former estimation of 6 for future computations.d) Update your computed estimates by re-multiplying the divisor of 2516 and the new quotient variable of 5: 2, 516 x 5 = 12, 580.e) After subtraction, the corrected remainder value becomes 1, 995 via the equation: 14, 575 - 12, 580 = 1, 995.

Since there are no further digits to perform computations on within the divisor, we can express the remainder as a fraction over the divisor--utilizing notation where the remaining total is represented as 1, 995 / 2, 516.

Add the decimal to the quotient :

= 5 + 0. 793

= 5. 793

Find out more on long division at https://brainly.com/question/25289437

#SPJ1


Related Questions

Find the weighted average of the numbers −3 and 5 with three fifths of the weight on the first number and two fifths on the second number. a. 4.8 b. 1.8 c. 0.2 d. −1.8

Answers

The weighted average of the numbers −3 and 5 with three fifths of the weight on the first number and two fifths on the second number is 0.2.

Weighted average = (weight of first number × first number + weight of second number × second number) / (weight of first number + weight of second number)

In this case, the first number is −3 with a weight of three fifths, and the second number is 5 with a weight of two fifths.

Plugging these values into the formula gives:

weighted average = (3/5 × (−3) + 2/5× 5) / (3/5 + 2/5)

weighted average = (−9/5 + 10/5) / 1

weighted average = 1/5

=0.2

To learn more on Number system click:

https://brainly.com/question/22046046

#SPJ1

Let f. X -> Y be a function. If we say that fis "one-to-one", this means that a. For every y in Y there is some x in X such that f(x) = y, b. For every y in Y there is at most one x in X such that f(x) = y. c. Every x in X gets mapped to exactly one element in Y. d. For every x in X there is at most one y in Y such that f(x) - y.

Answers

Considering f. X -> Y is a function. If we say that f is "one-to-one", this means that for every x in X, there is at most one y in Y such that f(x) - y. The correct answer is option d.


For every x in X, there is at most one y in Y such that f(x) = y. In a one-to-one function, every element in the domain X is mapped to a unique element in the codomain Y, and no two elements in X are mapped to the same element in Y.

Therefore, the correct answer is option d. For every x in X, there is at most one y in Y such that f(x) - y.

To know more about the function, visit:

https://brainly.com/question/31063449

#SPJ11

Find the future value of the following investment. Nominal Rate 3.1% Principal $9400.00 Frequency of Conversion semi-annually Time 9 years The future value is $ (Round the final answer to the nearest cent as needed. Round all intermediate values to six decimal places as needed.)

Answers

To find the future value of this investment, we can use the formula:
FV = P(1 + r/n)^(nt)
Where:
- FV is the future value
- P is the principal (or starting amount)
- r is the nominal annual interest rate (as a decimal)
- n is the frequency of conversion per year
- t is the time (in years)

Plugging in the given values, we get:
FV = 9400(1 + 0.031/2)^(2*9)
FV = 9400(1.0155)^18
FV = 9400(1.367576)
FV = 12848.92
Therefore, the future value of the investment is $12,848.92 (rounded to the nearest cent).

To learn more about Future Value : https://brainly.com/question/24703884

#SPJ11

For each sequence, find a formula for the general term, an. Sequences start with n=1. For example, answer n2 if given the sequence: 1,4,9,16,25,36, 1. 1/2,1/4,1/6,1/8, 2. 1/2,1/4,1/8,1/16,

Answers

1) The formula for the general term, an, is[tex]a_n = n^2.[/tex]

2)  The formula for the general term, an, is [tex]a_n = (1/2)^{(n-1).[/tex]

The total of a geometric sequence's finite or infinite terms is known as a geometric series. The analogous geometric series is a + ar + ar2 +..., arn-1 + for the geometric sequence a, ar, ar2,..., arn-1,... We are aware that "series" equates to "sum". The geometric series specifically refers to the total of phrases with a common ratio between every pair of neighboring terms.

1. The given sequence is a perfect square sequence, where each term is the square of its position in the sequence. Therefore, the formula for the general term, an, is[tex]a_n = n^2.[/tex]

2. The given sequence is a geometric sequence with a common ratio of 1/2. Therefore, the formula for the general term, an, is [tex]a_n = (1/2)^{(n-1).[/tex]

learn more about geometric sequence

https://brainly.com/question/13008517

#SPJ11

Customers inter-arrival times, {Sj: j≥ 1}, at a small car service center are independent exponentially
distributed random variables with common expectation, E [Sj] = 12 minutes. As before, Wk, denotes the
arrival time of a Kth customer.
1. Find expectation of a ratio, Q = W3/W5
2. Determine expected value of a ratio, (W5/W3)
3. Find expected value of the ratio, (W5 - W4)/W4

Answers

The expected value of the ratio (W5 - W4)/W4 is 4.

We know that the inter-arrival times between customers are exponentially distributed with a mean of 12 minutes. Let's use this information to solve the given problems:

The arrival time of the third customer is given by W3 = S1 + S2 + S3, and the arrival time of the fifth customer is given by W5 = S1 + S2 + S3 + S4 + S5. Therefore, Q = W3/W5 = (S1 + S2 + S3)/(S1 + S2 + S3 + S4 + S5).

We can use the fact that the sum of exponential random variables with the same rate parameter is a gamma random variable with shape parameter equal to the number of exponential random variables and rate parameter equal to the rate parameter of each exponential random variable. Therefore, S1 + S2 + S3 is a gamma random variable with shape parameter 3 and rate parameter 1/12, and S1 + S2 + S3 + S4 + S5 is a gamma random variable with shape parameter 5 and rate parameter 1/12.

Hence, Q is a ratio of two gamma random variables with known shape and rate parameters. We can use the properties of the gamma distribution to find the expectation of Q as:

E[Q] = E[(S1 + S2 + S3)/(S1 + S2 + S3 + S4 + S5)]

= E[(1/Gamma(3, 1/12))/(1/Gamma(5, 1/12))]

= E[(Gamma(5, 1/12)/Gamma(3, 1/12))]

= (5/3) * (1/3)

= 5/9

Therefore, the expected value of the ratio Q is 5/9.

Using similar reasoning as in part 1, we can write (W5/W3) as (S1 + S2 + S3 + S4 + S5)/(S1 + S2 + S3), which is a ratio of two gamma random variables with known shape and rate parameters. Therefore, we can find the expected value of this ratio as:

E[W5/W3] = E[(S1 + S2 + S3 + S4 + S5)/(S1 + S2 + S3)]

= E[(1/Gamma(5, 1/12))/(1/Gamma(3, 1/12))]

= E[(Gamma(3, 1/12)/Gamma(5, 1/12))]

= (3/5) * (1/3)

= 1/5

Therefore, the expected value of the ratio W5/W3 is 1/5.

Using the same approach, we can write (W5 - W4)/W4 as (S5 - S4)/(S1 + S2 + S3 + S4). This is a ratio of two gamma random variables with known shape and rate parameters. Therefore, we can find the expected value of this ratio as:

E[(W5 - W4)/W4] = E[(S5 - S4)/(S1 + S2 + S3 + S4)]

= E[(1/Gamma(1, 1/12))/(1/Gamma(4, 1/12))]

= E[(Gamma(4, 1/12)/Gamma(1, 1/12))]

= 4

Therefore, the expected value of the ratio (W5 - W4)/W4 is 4.

To learn more about exponentially visit:

https://brainly.com/question/27893440

#SPJ11

A figure undergoes a translation, reflection, and dilation. Will the image be similar to the original figure? Why or why not?
O A No; a dilation is not a rigid transformation, so the image is not similar to the preimage.
OB. Yes; any number of rigid transformations and dilations will always produce an image similar to the preimage.
OC. No, when more than one transformation is applied, the image is not similar to the preimage.
OD. Yes; since only 3 transformations were applied, the image will be similar to the preimage.

Answers

The image will be similar to the original figure. The correct answer is OB) Yes; any number of rigid transformations and dilations will always produce an image similar to the preimage.

A translation, reflection, and dilation are all examples of rigid transformations, which means that they preserve the shape and size of the figure.

A dilation is also a similarity transformation, which means that it scales the figure uniformly in all directions from a fixed center. The result of applying these three transformations to a figure will be a figure that is similar to the original, but possibly rotated or reflected.

Therefore, the correct option is OB).

To know more about transformations:

https://brainly.com/question/13801312

#SPJ1

If 1/8 of a fence is built in 2/5 of an hour, how much of the fence will be completed in 1 hour?

A. 1/4
B. 5/16
C. 1/3
D. 21/40

Answers

Answer: B

Step-by-step explanation:

Im in highschool common sense

Answer:

5/16

Step-by-step explanation:

1/8 f 2/5 hr = 1/8 *5/2 = 5/16 fence per hour

Approximately 10% of all people are left-handed. Consider 25 randomly selected people. a) State the random variable. Select an answer b) List the given numeric values with the correct symbols. ? = 25 ? = 0.1 c) Compute the mean. Round final answer to 2 decimal places. Which of the following is the correct interpretation of the mean? Select an answer d) Compute the standard deviation. Round final answer to 2 decimal places.

Answers

The standard deviation is approximately 1.50.

a) The random variable (X) is the number of left-handed people among the 25 randomly selected people.

b) The given numeric values with the correct symbols are:
n = 25 (sample size)
p = 0.1 (probability of being left-handed)

c) To compute the mean (µ), use the formula µ = n * p:
µ = 25 * 0.1 = 2.5

The correct interpretation of the mean is that on average, 2.5 people are expected to be left-handed in a sample of 25 randomly selected people.

d) To compute the standard deviation (σ), use the formula σ = √(n * p * (1 - p)):
σ = √(25 * 0.1 * (1 - 0.1))
σ = √(25 * 0.1 * 0.9)
σ = √(2.25)
σ ≈ 1.50 (rounded to 2 decimal places)

So, the standard deviation is approximately 1.50.

To learn more about standard deviation here:

https://brainly.com/question/23907081#

#SPJ11

Let n1 = 100​, X1 = 90​, n2 = 100​, and X2 = 70.
Complete parts​ (a) and​ (b) below.
a. At the 0.01 level of​ significance, is there evidence of a significant difference between the two population​ proportions?
Determine the null and alternative hypotheses. Choose the correct answer below.
A. H0: π1 ≥ π2; H1: π1 < π2
B. H0: π1 = π2; H1: π1 ≠ π2
C. H0: π1 ≤ π2; H1: π1 > π2
D. H0: π1 ≠ π2; H1: π1 = π2
Calculate the test​ statistic, ZSTAT​, based on the difference p1 − p2.
The test​ statistic, ZSTAT​, is ____? ​(Type an integer or a decimal. Round to two decimal places as​ needed.)
Calculate the​ p-value.
The​ p-value is ____? ​(Type an integer or a decimal. Round to three decimal places as​ needed.)
Determine a conclusion. Choose the correct answer below.
(Do not reject, Reject) the null hypothesis. There is (insufficient, sufficient) evidence to support the claim that there is a significant difference between the two population proportions.
b. Construct a 99​% confidence interval estimate of the difference between the two population proportions.
____? ≤ π − π2 ≤ ____? ​(Type integers or decimals. Round to four decimal places as​ needed.)

Answers

The values of p1, p2, n1, and n2 are not provided in the question, so we cannot calculate the specific test statistic, p-value, or construct the confidence interval without that information.

To determine the null and alternative hypotheses for testing the significance of a difference between two population proportions, we need to consider the given information.

In this case, the sample sizes and the number of successes in each sample are provided. Let's denote the sample proportions as p1 and p2, which can be calculated as p1 = X1/n1 and p2 = X2/n2, where X1 and X2 represent the number of successes in each sample, and n1 and n2 represent the respective sample sizes.

The null and alternative hypotheses can be stated as follows:

Null Hypothesis (H0): π1 = π2 (The population proportions are equal)

Alternative Hypothesis (H1): π1 ≠ π2 (The population proportions are not equal)

Therefore, the correct answer is:

B. H0: π1 = π2; H1: π1 ≠ π2

To calculate the test statistic (ZSTAT) and the p-value, we can use the following formulas:

ZSTAT = (p1 - p2) / √[(p1(1 - p1) / n1) + (p2(1 - p2) / n2)]

To find the p-value, we need to compare the absolute value of ZSTAT to the critical value(s) based on the significance level. Since the significance level is not provided, we cannot determine the exact p-value without that information.

Regarding the conclusion, we compare the p-value to the significance level (α) to make a decision. If the p-value is less than α, we reject the null hypothesis; otherwise, we fail to reject the null hypothesis.

To construct the 99% confidence interval estimate, we can use the formula:

p1 - p2 ± Zα/2 * √[(p1(1 - p1) / n1) + (p2(1 - p2) / n2)]

Here, Zα/2 represents the critical value corresponding to a 99% confidence level, which is obtained from the standard normal distribution.

Unfortunately, the values of p1, p2, n1, and n2 are not provided in the question, so we cannot calculate the specific test statistic, p-value, or construct the confidence interval without that information.

To learn more about population visit:

https://brainly.com/question/16138725

#SPJ11

(Note click on Question to enlarge) If xn, is a positive integer for all integers n. How many number(s) of sets of solutions do x1 + x2 + x3 + x4 ≤ 27 have?

Answers

The number of sets of solutions to x1 + x2 + x3 + x4 ≤ 27 is 4060.

To solve this problem, we can use a technique called stars and bars. We can represent the sum x1 + x2 + x3 + x4 as a row of 27 stars, with 3 bars separating the stars into 4 groups (one for each variable). For example, if x1 = 5, x2 = 2, x3 = 10, and x4 = 8, we can represent this as:

*****|**|********

where each * represents one unit of x and each | represents a separation between the variables.

Using this representation, we can see that there are 26 spaces between the stars and bars where we can choose to place the bars (since we can't place them at the beginning or end of the row). We need to choose 3 of these spaces to place the bars, which can be done in (26 choose 3) = 2600 ways.

However, we need to ensure that each xi is a positive integer. To do this, we can use a technique called balls and urns, which involves adding an extra unit to each variable before applying stars and bars. This ensures that each xi is at least 1, since the extra units can be thought of as "placeholders" that ensure that there is at least one unit of each variable.

Using this modified technique, we need to distribute 31 units (27 stars + 4 extra units) into 4 urns (one for each variable), with no urn having more than 30 units (since we subtracted 4 units from 31 to account for the extra units). This can be done in (30 choose 3) = 4060 ways.

Therefore, the number of sets of solutions to x1 + x2 + x3 + x4 ≤ 27 is 4060.

Learn more about "variable": https://brainly.com/question/82796

#SPJ11

Please find the inverse of the matrix, if it exists. A = [6 3 3 0]

Answers

Yes, the inverse of the matrix which is [tex]A^{-1}[/tex] = [tex]\begin{bmatrix} 0 & \frac{1}{3} \\ -\frac{1}{2} & 0 \end{bmatrix}[/tex]  for the 2 x 2 matrix [tex]\begin{bmatrix} 6 & 3 \\ 3 & 0 \end{bmatrix}[/tex].

To find the inverse of a matrix, we need to check if it is invertible first, which means its determinant should not be equal to zero.

Let's calculate the determinant of the matrix,

A: [tex]\begin{bmatrix} 6 & 3 \\ 3 & 0 \end{bmatrix}[/tex]

det(A) = (6 x 0) - (3 x 3) = -9

Since the determinant is not equal to zero, we can conclude that matrix A is invertible.

To find the inverse of matrix A, we can use the following formula:

[tex]A^{-1}[/tex] = (1/det(A)) x adj(A)

where adj(A) is the adjugate of A and can be calculated by taking the transpose of the matrix of cofactors of A.

The matrix of cofactors of A is:

[tex]\begin{bmatrix} 0 & -3 \\ -3 & 6 \end{bmatrix}[/tex]

Taking the transpose of the matrix of cofactors, we get:

[tex]\begin{bmatrix} 0 & -3 \\ 3 & 6 \end{bmatrix}[/tex]

So, the adjugate of A is:

adj(A) = [tex]\begin{bmatrix} 0 & -3 \\ 3 & 6 \end{bmatrix}[/tex]

Now, we can find the inverse of A:

[tex]A^{-1}[/tex] = (1/-9) x adj(A)

= (-1/9) x [tex]\begin{bmatrix} 0 & -3 \\ 3 & 6 \end{bmatrix}[/tex]

= [tex]\begin{bmatrix} 0 & \frac{1}{3} \\ -\frac{1}{2} & 0 \end{bmatrix}[/tex]

Therefore, the inverse of matrix A is:

[tex]A^{-1}[/tex] = [tex]\begin{bmatrix} 0 & \frac{1}{3} \\ -\frac{1}{2} & 0 \end{bmatrix}[/tex]

Learn more about the inverse matrix at

https://brainly.com/question/4017205

#SPJ4

question content area top part 1 find the center of mass of a thin plate of constant density covering the region bounded by the parabola yx and the line y.

Answers

The center of mass of the thin parabola plate is located at the point (1/2, 3/10).

The center of mass of a two-dimensional object is the point (X', Y') where the object would balance if it were suspended from that point. The coordinates X' and Y' are given by the formulas:

X' = Mx / M

Y' = My / M

where M is the total mass of the object, Mx is the moment of the object with respect to the x-axis, and My is the moment of the object with respect to the y-axis. The moments are defined as integrals of the density over the region:

Mx = ∫∫ xρ(x,y) dA

My = ∫∫ yρ(x,y) dA

where ρ(x,y) is the density of the object at the point (x,y) and dA is an element of area.

In this case, the density of the thin plate is constant, so we can take it out of the integrals:

Mx = ∫∫ x dA = ∫∫ x dx dy

My = ∫∫ y dA = ∫∫ y dx dy

The region bounded by the parabola y = x² and the line y = 0 can be described as the set of points (x,y) such that 0 ≤ y ≤ x². Therefore, we can set up the integrals as follows:

Mx = ∫∫ x dx dy = ∫0^1 ∫0ˣ x dx dy = ∫0^1 (1/2)x² dy = 1/6

My = ∫∫ y dx dy = ∫0^1 ∫0ˣ y dx dy = ∫0^1 (1/2)x⁴ dy = 1/10

where we have used the fact that the total mass of the plate is equal to the area of the region, which is 1/3.

Finally, we can use these values to compute the coordinates of the center of mass:

X' = Mx / M = (1/6) / (1/3) = 1/2

Y' = My / M = (1/10) / (1/3) = 3/10

Therefore, the center of mass of the thin plate is located at the point (1/2, 3/10).

Learn more about Parabola:

brainly.com/question/29267743

#SPJ11

ANSWER FAST PLEASE AND CORRECTLY!!!!!!!! 25 POINTS! Let p: A shape is a triangle.Let q: A shape has four sides.Which is true if the shape is a rectangle? (A.) P-->Q (B.) P^Q (C.) P<-->Q (D.) Q-->P

Answers

A shape is a triangle.Let q: A shape has four sides. The option that is true if the shape is a rectangle is D.) Q-->P

How to explain the shape

It should be noted that because a rectangle has four sides, q holds true for rectangles. However, because a rectangle is not a triangle, p is untrue.

As a result, for a rectangle, the assertion "Q implies P" or "if a shape has four sides, then it is a triangle" is untrue. As a result, option D is the correct answer, "Q implies P."

Learn more about rectangle on

https://brainly.com/question/25292087

#SPJ1

Please answer these questions with no plagiarism and with your own words. ASAP
Question 1: Five-City Project. The Stanford Five-City Project is a comprehensive community health education study of five moderately sized Northern California towns. Multiple-risk factor intervention strategies were randomly applied to two of the communities. The other three cities served as controls. Outline the design of this study in schematic form.
Question 2: Employee counseling. An employer offers its employees a program that will provide up to four free psychological counseling sessions per calendar year. To evaluate satisfaction with this service, the counseling office mails questionnaires to every 10th employee who used the benefit in the prior year. There were 1000 employees who used the benefit. Therefore, 100 surveys were sent out. However, only 25 of the potential respondents completed and returned their questionnaire.
Describe the population for the study.
Describe the sample.
What concern is raised by the fact that only 25 of the 100 questionnaires were completed and returned?
Question 3: What would you report? What is an appropriate measure of central location for data that are really skewed? What is an appropriate measure of spread for data that are really skewed?

Answers

The IQR is more robust to outliers than the standard deviation, which is sensitive to outliers.

Answering your questions:

Question 1:

The Stanford Five-City Project is a study of five moderately sized Northern California towns. Multiple-risk factor intervention strategies were randomly applied to two of the communities, while the other three cities served as controls. The design of this study can be outlined in schematic form as follows:

Random selection of five moderately sized Northern California towns

Two of the towns randomly assigned to receive multiple-risk factor intervention strategies

Three of the towns serve as controls and do not receive any intervention

The health outcomes of the communities are compared after the intervention to evaluate its effectiveness

Question 2:

Population: The population for this study is all employees who used the psychological counseling benefit in the prior year.

Sample: The sample is the 25 employees who completed and returned their questionnaires.

Concern: The fact that only 25 of the 100 questionnaires were completed and returned raises concerns about the representativeness of the sample. The sample may not be representative of the population, and the results of the study may not be generalizable.

Question 3:

If data are really skewed, an appropriate measure of central location would be the median. An appropriate measure of spread for skewed data would be the interquartile range (IQR), which is the difference between the third quartile (Q3) and the first quartile (Q1). The IQR is more robust to outliers than the standard deviation, which is sensitive to California

To learn more about California visit:

https://brainly.com/question/31359935

#SPJ11

SKIP (2)
First try was incorrect
What is the value of x? Your answer may be exact or rounded to the
nearest tenth.
-3x
96"
31"

Sorry about the blurry pic

Answers

I believe the answer would be -28. This is because the line labeled 96 and -3x create a supplementary angle which equals 180.
So, you create the equation 180=96-3x

180=96-3x
-96 on both sides,
84=-3x
Then divide by -3x on both sides
-28=x

suppose that we take a data set and divide it into two equal parts at random, namely training and testing sets. we try out two different classification predictive models: model 1 and model 2. first, you use model 1 and get an error rate of 35% on the training data and 40% on the testing data. second, you use model 2 and get an error rate of 5% on the training data and 40% on the testing data.

Answers

Model 2 is better for the given data set as it has a lower error rate on the training data while having the same error rate as Model 1 on the testing data.

In predictive modeling, the goal is to create a model that can accurately predict outcomes on new data. To do this, a common approach is to divide the available data into two sets: a training set used to train the model and a testing set used to evaluate its performance.

In this scenario, Model 1 has a lower accuracy on the training set (35%) compared to Model 2 (5%). This suggests that Model 2 is better at capturing the underlying patterns in the data. However, when evaluated on the testing set, both models have the same error rate of 40%.

Therefore, we can conclude that Model 2 is better for this particular data set because it has a better performance on the training data, which is an indicator of its ability to generalize well to new data. On the other hand, Model 1 is likely overfitting the training data and may not perform as well on new data.

To know more about lower accuracy, refer here:
https://brainly.com/question/28073948#
#SPJ11

Watershed is a media services company that provides online streaming movie and television content. As a result of the competitive market of streaming service providers, Watershed is interested in proactively identifying will unsubscribe in the next three months based on the customer's characteristics. For a test sat of customers, the fle Watershed contains an Indication of whether a customer unsubscribed in the past three months and the ciassification model's estimated. unsubscribe probabllity for the customer. In an effort to prevent customer churn, Watershed wishes to offer promotions to customers who may unsubseribe. It costs Watershed
$10
to offer a promotion to a customer. If offered a promotion, it successfully persuades a customer to remain a Watershed customer with probability
0.6
, and the retaining the customer is worth
$60
to Watershed. click on the datanile logo to reference the data. DATA Assuming customers wii be offered the promotion in order of decreasing estimated unsubscribe probability; determine how many customers Watershed should offer the promotion to maximize the profit of the intervention campaign. Compute the average profit from offering the top
n
customers a promotion as: Profit = Number of unsubscribing customers in top
n
×
(P(unsubseribing customer persuaded to remain)
×(60−10)
+
P(unsubscribing customer is not persuaded
)×(0−10))
+
Number of customers whe dont intend to uneubscribe
×(0−10)
The maximum profit of
$
(3) occurs when

Answers

Watershed should offer the promotion to the top 70 customers to maximize their profit from the intervention campaign.

To determine the optimal number of customers to offer the promotion to, Watershed should start by offering it to customers with the highest estimated unsubscribe probability and work their way down until the promotion budget is exhausted. This approach will maximize the chances of persuading customers who are most likely to unsubscribe.

Let's assume that Watershed has a budget of $1000 to spend on promotions. This means they can offer the promotion to a maximum of 100 customers (1000/10).

To calculate the expected profit, we need to consider the probability of a customer unsubscribing, the probability of the promotion persuading them to remain a customer, and the value of retaining a customer and offering a promotion.

If a customer unsubscribes and is not persuaded to remain, the cost to Watershed is $10. If they unsubscribe but are persuaded to stay, the value to Watershed is $50 ($60-$10). If they don't unsubscribe, the cost is $0.

Using the formula given, we can calculate the profit for different values of n (the number of customers offered the promotion):

n = 10:
Profit = 10 * (0.6 * 50 + 0.4 * (-10)) + 0 * (-10) = $460

n = 20:
Profit = 20 * (0.6 * 50 + 0.4 * (-10)) + 0 * (-10) = $780

n = 30:
Profit = 30 * (0.6 * 50 + 0.4 * (-10)) + 0 * (-10) = $990

n = 40:
Profit = 40 * (0.6 * 50 + 0.4 * (-10)) + 0 * (-10) = $1090

n = 50:
Profit = 50 * (0.6 * 50 + 0.4 * (-10)) + 0 * (-10) = $1150

n = 60:
Profit = 60 * (0.6 * 50 + 0.4 * (-10)) + 0 * (-10) = $1180

n = 70:
Profit = 70 * (0.6 * 50 + 0.4 * (-10)) + 0 * (-10) = $1190

n = 80:
Profit = 80 * (0.6 * 50 + 0.4 * (-10)) + 0 * (-10) = $1180

n = 90:
Profit = 90 * (0.6 * 50 + 0.4 * (-10)) + 0 * (-10) = $1150

n = 100:
Profit = 100 * (0.6 * 50 + 0.4 * (-10)) + 0 * (-10) = $1100

From the calculations above, we can see that the maximum profit of $1190 occurs when the promotion is offered to 70 customers. Beyond this point, the cost of offering the promotion to less likely churners outweighs the benefit of retaining those customers.

Therefore, Watershed should offer the promotion to the top 70 customers to maximize their profit from the intervention campaign.

Learn more about probability at https://brainly.com/question/24756209

#SPJ11

Marcus is 5 7 /24 feet tall. Ben is 5 13/ 16 feet tall. Which of the two boys is taller? Give your answer and complete the justification using decimal representations of the mixed numbers. Round decimal entries to four decimal places.

Answers

The taller of the two boys is Ben if Marcus is 5 7 /24 feet tall and Ben is 5 13/ 16 feet tall.

Which of the two boys is taller?

From the question, we have the following parameters that can be used in our computation:

Marcus is 5 7 /24 feet tall. Ben is 5 13/ 16 feet tall.

This means that

Marcus = 5 7 /24 feet tall

Ben = 5 13/ 16 feet tall.

Express the heights as decimals

So, we have

Marcus = 5.292 feet tall

Ben = 5.8125 feet tall.

When the above values are compared, we have

5.8125 feet tall > 5.292 feet tall

Hence, the taller of the two boys is Ben

Read more about lengths at

https://brainly.com/question/24487155

#SPJ1

HELPPPPPP!!!!!!!!!!!!!

Answers

Haha I remember this back in 7th grade good times the answer is y=1/3x+

human resource management
urgent please
pleqse help me answer question 1
please help me answer question 2
pls help me answer question 3
please help me answer wuestion 4
thank you so much
Questions 1. Explain Global similarities and differences in HR. (10 marks) 2. How to prevent accidents (10 marks) 3. What is the effect of employee transfer to the family life? (5 marks) 4. Explain TWO (2) ways to make direct financial payments to employees.(5 marks)

Answers

Direct financial payments to employees include overtime pay, commissions, and profit-sharing.

Global similarities and differences in HR:

Globalization has led to the spread of HR practices and policies across countries, resulting in both similarities and differences in HR. The similarities in HR practices across the globe include:

Recruitment and selection: Most organizations use some form of recruitment and selection process to hire employees, although the specific methods and criteria used may vary across countries.

Training and development: Organizations invest in training and development to improve employee skills and productivity, although the types of training programs and methods used may vary across countries.

Performance management: Most organizations have some form of performance management process to evaluate and reward employees, although the specific methods and criteria used may vary across countries.

The differences in HR practices across the globe include:

Legal and regulatory environment: The legal and regulatory environment in each country can significantly affect HR practices, including labor laws, tax laws, and employment regulations.

Cultural differences: HR practices can be influenced by cultural differences across countries, including attitudes toward work, management styles, and communication styles.

Economic factors: Economic factors such as labor market conditions, wage levels, and cost of living can influence HR practices in different countries.

How to prevent accidents:

Preventing accidents in the workplace is essential for maintaining a safe and healthy work environment. Here are some ways to prevent accidents:

Conduct regular safety training: Provide safety training to employees to educate them on the hazards in the workplace and how to avoid them.

Implement safety procedures: Develop and enforce safety procedures for all tasks and equipment to ensure that employees are following safe practices.

Provide personal protective equipment: Provide employees with appropriate personal protective equipment (PPE) to minimize the risk of injury or illness.

Conduct regular safety inspections: Regularly inspect the workplace to identify potential hazards and address them before they cause an accident.

Encourage reporting: Encourage employees to report any safety concerns or incidents, so that they can be addressed promptly.

The effect of employee transfer to family life:

Employee transfers can have a significant impact on the employee's family life, especially if the transfer involves relocating to a new city or country. The effects of employee transfer on family life can be both positive and negative. Some positive effects of employee transfer on family life include:

Exposure to new cultures: The transfer can provide an opportunity for the employee and their family to experience new cultures and learn new languages.

Career growth: The transfer can provide the employee with an opportunity for career growth and advancement.

Some negative effects of employee transfer on family life include:

Disruption of family routines: The transfer can disrupt the family's routine, including their children's education and social lives.

Emotional stress: The transfer can cause emotional stress on the family, especially if they have to leave behind friends and family.

Two ways to make direct financial payments to employees:

Direct financial payments to employees can take different forms. Here are two ways to make direct financial payments to employees:

Salary: Salary is a fixed amount of money paid to an employee on a regular basis, usually monthly or bi-weekly.

Bonus: A bonus is an additional payment made to employees, usually as a reward for exceptional performance or as an incentive to achieve certain goals.

Other examples of direct financial payments to employees include overtime pay, commissions, and profit-sharing.

To learn more about Disruption visit:

https://brainly.com/question/6330315

#SPJ11

6. (3 points) Let X be a Markov chain containing an absorbing state s with which all other states i communicate, in the sense that pis(n) > 0 for some n = n(i). Show that all states other than s are transient.

Answers

The second factor is the probability of not entering s.

To show that all states other than s are transient, we need to show that the expected number of visits to any state other than s starting from any state i is finite.

Since s is an absorbing state, once the chain enters state s, it will never leave. Therefore, we can consider the subchain of X that consists of all states other than s. This subchain is also a Markov chain, and it is irreducible because all states communicate with each other.

Let T be the first time that the subchain enters the absorbing state s. In other words, T is the first time that the chain reaches s starting from any state i in the subchain. Then, we can express the expected number of visits to any state j in the subchain starting from any state i as:

E_i[N_j] = 1 + ∑_{n=1}^∞ P_i(T>n) P_j^(n-1)(1-p_jj)

The first term represents the initial visit to state j. The sum represents the expected number of subsequent visits to state j, given that the subchain has not yet entered the absorbing state s. The probability P_i(T>n) is the probability that the subchain has not entered s after n steps, starting from state i. The probability P_j^(n-1)(1-p_jj) is the probability that the subchain reaches state j for the (n-1)-th time and then leaves j without entering s, given that it has already visited j n-1 times.

Since all states other than s communicate with s, there exists some n = n(j) such that P_j(T<=n) > 0. This means that the subchain will eventually enter s starting from any state j with probability 1. Therefore, we can write:

E_i[N_j] = 1 + ∑_{n=1}^∞ P_i(T>n) P_j^(n-1)(1-p_jj)

<= 1 + P_i(T>n(j)) ∑_{n=1}^∞ P_j^(n-1)(1-p_jj)

<= 1 + P_i(T>n(j)) ∑_{n=1}^∞ (1-p_jj)^{n-1}

= 1 + P_i(T>n(j)) (1/(1-(1-p_jj)))

= 1 + P_i(T>n(j)) (1/p_jj)

The inequality follows because the sum is a geometric series, and the last equality follows from the formula for the sum of an infinite geometric series. Since p_jj < 1 for all j, we have 1/p_jj < ∞. Therefore, if we can show that P_i(T>n(j)) is finite for all i and j, then we can conclude that E_i[N_j] is finite for all i and j.

To show that P_i(T>n(j)) is finite for all i and j, note that by the Markov property, the probability that the subchain enters s for the first time after n steps starting from state i is:

P_i(T>n) = ∑_{j∈S} P_i(X_n=j, T>n | X_0=i)

where S is the set of all states other than s. Since the subchain is irreducible, we have:

P_i(X_n=j, T>n | X_0=i) = P_i(X_n=j | X_0=i) P_i(T>n | X_n=j)

The first factor is the probability of reaching state j after n steps starting from i, which is positive because all states communicate. The second factor is the probability of not entering s

To learn more about entering visit:

https://brainly.com/question/14532989

#SPJ11

answer the questions in the file

Answers

The solution is, the value of x is, x = 15.

Corresponding sides have the same ratio:

 UV/PR = TV/QR

 (x +6)/14 = (x -3)/8

 4(x +6) = 7(x -3) . . . . . . multiply by 56

 4x +24 = 7x -21 . . . . . . eliminate parentheses

 45 = 3x . . . . . . . . . . . add 21-4x

 15 = x . . . . . . . . . . . .divide by 3

Alternate solution

The long-side : short-side ratios for the two triangles are ...

 14 : 8 = (x +6) : (x -3)

If we look at the differences between the ratio numbers we see ...

 14 -8 = 6

 (x +6) -(x -3) = 9

That is, the numbers in the second ratio must be 9/6 = 3/2 times the numbers in the first ratio. In other words, ...

 x -3 = (3/2)(8) = 12

 x = 15

Check: x +6 = 3/2(14) ; 15 +6 = 21

The solution is, the value of x is, x = 15.

To learn more on ratio click:

brainly.com/question/13419413

#SPJ1

complete question:

question is given in the picture.

a gardener uses a total of 61.5 gallons of gasoline in one month. of the total amount of gasoline, was used in his lawn mowers. how many gallons of gasoline did the gardener use in his lawn mowers in the one month? to get credit, you must show all of your work. answers only will be counted as incorrect (whether it is correct or not!) question 4 options:

Answers

The gardener used 40.5 gallons of gasoline in his lawn mowers in the one month.

Let's say the amount of gasoline used in the lawn mowers is x gallons.

Then, the rest of the gasoline (61.5 - x) would have been used for other purposes.

Since the total amount of gasoline used is 61.5 gallons, we can set up an equation:

x + (61.5 - x) = 61.5

Simplifying this equation, we get:

x + 61.5 - x = 61.5

Combining like terms, we get:

61.5 = 61.5

This equation is true, so we know that our assumption that x is the amount of gasoline used in the lawn mowers is correct.

Therefore, the gardener used x = 40.5 gallons of gasoline in his lawn mowers in the one month.

Know more about gasoline here:

https://brainly.com/question/639934

#SPJ11

What is the measure of angle 4 if $m\angle 1 = 76^{\circ}, m\angle 2 = 27^{\circ}$ and $m\angle 3 = 17^{\circ}$?

Answers

Given the measures of the angle, the measure of angle A is 109 degrees

We have,

A supplementary angles are angles that add up to 180 degrees. For example 100 and 80 degrees are supplementary angles.

The first step is to determine the value of x:

(4x + 3) + (8x - 27) = 180

12x - 24 = 180

12x = 180 + 24

12x = 204

x = 17

so, we get,

A = 8(17) - 27

  = 109 degrees

To learn more about supplement angles, please check: brainly.com/question/2766460

#SPJ1

complete question:

∠A and \angle B∠B are supplementary angles. If m\angle A=(8x-27)^{\circ}∠A=(8x−27)

and m\angle B=(4x+3)^{\circ}∠B=(4x+3)

, then find the measure of \angle A∠A.

abouth wed of woy and liontin
motaslim Spod
EVED or 1968
If v varies directly with g, and v = 36 when g = 4. Find v when g = 11.

Answers

If v varies directly with g, then v = kg for some constant k. To find k, we can use the initial condition v = 36 when g = 4:
v = kg
36 = k(4)
k = 9
So the equation relating v and g is v = 9g. To find v when g = 11, we substitute into this equation:
v = 9g
v = 9(11)
v = 99
Therefore, when g = 11, v = 99.

Use​ Cramer's rule to solve the system. 2x + y = 14
5x - 2y = 26
Write the fractions using​ Cramer's Rule in the form of determinants.

x=


y=

Answers

The solution of the equation using Cramer's rule is x = -6 and y = 2.

What is the solution of the equation?

The solution of the equation can be obtained by using Cramer's rule as shown below;

2x + y = 14

5x - 2y = 26

The determinant is calculated as;

    2   1

     5  - 2

Δ= -4 - 5

= - 9

The y determinant is calculated as;

            2  14

            5  26

Δy= 52 - 70

= -18

The x determinant is calculated as;

1    14

-2  26

Δx = 26 + 28

= 54

The value of x and y is calculated as;

x = Δx/Δ

y = Δy/Δ

x = 54/-9 = -6

y = -18/-9 = 2

Learn more about Cramer's rule here: https://brainly.com/question/20354529

#SPJ1

(a) Show that the curvature at each point of a straight line is K = 0.
(b) Show that the curvature at each point of a circle of radius r is K = 1/r.

Answers

a. The curvature at each point of a straight line is zero.

b. This means that dT/dθ is constant and has a magnitude of 1/r, since the length of the radius vector is always r. Therefore, we have:

K = |dT/ds| = |dT/dθ * 1/r| = 1/r,

as claimed.

What is equation of straight line?

Y = mx + c is the general equation for a straight line, where m denotes the line's slope and c the y-intercept. It is the version of the equation for a straight line that is used most frequently in geometry. There are numerous ways to express the equation of a straight line, including point-slope form, slope-intercept form, general form, standard form, etc. A straight line is a geometric object with two dimensions and infinite lengths at both ends.

The formulas for the equation of a straight line that are most frequently employed are y = mx + c and axe + by = c. Other versions include point-slope, slope-intercept, standard, general, and others.

(a) Let's consider a straight line with equation y = mx + b, where m is the slope and b is the y-intercept.

The tangent vector of the line is given by T = (1, m), which has a constant magnitude of [tex]sqrt(1 + m^2).[/tex]

The normal vector is N = (-m, 1), which also has a constant magnitude of sqrt(1 + m^2).

The curvature K is given by [tex]K = ||dT/ds|| / ||T||^2[/tex], where s is the arc length.

Since the line is straight, the tangent vector is constant along the curve and [tex]dT/ds = 0. Therefore, K = 0 / ||T||^2 = 0.[/tex]

Hence, the curvature at each point of a straight line is zero.

b. To show that the curvature at each point of a circle of radius r is K = 1/r, we can use the formula for curvature in terms of the radius of curvature:

K = 1/R,

where R is the radius of curvature. For a circle, the radius of curvature is equal to the radius of the circle itself, so we have:

K = 1/r.

This formula tells us that the curvature at each point of a circle is inversely proportional to the radius of the circle. In other words, as the radius of the circle gets smaller, the curvature gets larger, and vice versa.

To see why this formula is true, we can consider the definition of curvature as the rate at which the direction of a curve is changing as we move along it. For a circle, the direction of the curve is constantly changing as we move around it, but the amount of change is always the same. Specifically, the direction of the curve changes by an angle of 2π radians (i.e., a full circle) as we complete one full revolution around the circle. This means that the curvature of the circle is constant and equal to 1/r, where r is the radius of the circle.

To see why this is true, we can use the formula for the arc length of a circle:

s = rθ,

where s is the arc length, r is the radius of the circle, and θ is the angle subtended by the arc (in radians). For a full circle, θ = 2π, so we have:

s = 2πr.

Now, the curvature K can be defined as the rate at which the unit tangent vector T changes as we move along the curve:

K = |dT/ds|,

where |.| denotes the magnitude of a vector. For a circle, the unit tangent vector T is always perpendicular to the radius vector pointing to the center of the circle, so we can write:

dT/ds = dT/dθ * dθ/ds = dT/dθ * 1/r,

where we have used the chain rule and the fact that dθ/ds = 1/r (since s = rθ). Now, since the direction of the curve changes by an angle of 2π radians as we complete one full revolution around the circle, the unit tangent vector T returns to its initial direction after one full revolution. This means that dT/dθ is constant and has a magnitude of 1/r, since the length of the radius vector is always r. Therefore, we have:

K = |dT/ds| = |dT/dθ * 1/r| = 1/r,

as claimed.

Learn more about straight line, by the following link

https://brainly.com/question/16949303

#SPJ4

assume the following: a total tax cut was $93 billion, government spending was $99 billion, and as a result there was $16 billion less investment due to crowding out. the mpc is 0.8. identify the maximum change in gdp as a result of the new policies. enter you answer rounded or truncated to two decimals.

Answers

The  maximum change in GDP resulting from the given policies is a decrease of $545 billion.

To determine the maximum change in GDP resulting from the given policies, we can use the following formula:

ΔGDP = (ΔSpending + ΔInvestment) / (1 - MPC)

where ΔSpending is the change in government spending and ΔInvestment is the change in investment.

In this case, we have:

ΔSpending = -$93 billion (since it is a tax cut)
ΔInvestment = -$16 billion
MPC = 0.8

Substituting these values into the formula, we get:

ΔGDP = (-$93 billion + (-$16 billion)) / (1 - 0.8) = -$109 billion / 0.2 = -$545 billion

Therefore, the maximum change in GDP resulting from the given policies is a decrease of $545 billion.

Visit to know more about Maximum change:-

brainly.com/question/31325032

#SPJ11

Question:

How much did Alfie spend at Whoa Foods?

If Alfie makes a net monthly income of $1375, will his cookout keep him within the 20% Spending Guideline for food this month?

How much is he over or under?

Answers

The total amount that Alfie spent at Whoa foods is: $88.59

Yes, his cookout keep him within the 20% Spending Guideline for food this month.

He is under by 13.56%

What is the total amount spent?

The total amount that Alfie spent at Whoa foods will be gotten by summing up all the amounts of each item to get:

$5.77 + $7.29 + $7.99 + $21.68 + $14.9 + $7.48 + $6.98 + $7.02 + $9.48

= $88.59

He makes a net monthly income of $1375.

Thus:

Percentage spent on food = 88.59/1375 * 100% = 6.44%

Since there is a max of 20% from guidelines to be spent on the food, then he is under by 20% - 6.44% = 13.56%

Read more about total spent at: https://brainly.com/question/25109150

#SPJ1

A schoolteacher is worried that the concentration of dangerous, cancer-causing radon gas in her classroom is greater than the safe level of 4pCi/L. The school samples the air for 36 days and finds an average concentration of 4.4pCi/L with a standard deviation of 1pCi/L. 1. To test whether the average level of radon gas is greater than the safe level, the appropriate hypotheses are ________. a. H0: μ ≤ 4.0, HA: μ > 4.0 b. H0: μ = 4.0, HA: μ ≠ 4.0 c. H0: μ ≥ 4.4, HA: μ < 4.4 d. H0: X = 4.4, HA: X ≠ 4.4 2. The value of the test statistic is ________. a. t = –2.40 b. z = –2.40 c. t = 2.40 d. z = 2.40 3. At a 5% significance level, the decision is to ________. A. reject H0; we can conclude that the mean concentration of radon gas is greater than the safe level B. reject H0; we cannot conclude that the mean concentration of radon gas is greater than the safe level C. not reject H0; we can conclude that the mean concentration of radon gas is greater than the safe level D. not reject H0; we cannot conclude that the mean concentration of radon gas is greater than the safe level

Answers

The appropriate hypotheses for testing whether the average level of radon gas is greater than the safe level of 4pCi/L are:

H0: μ ≤ 4.0 (null hypothesis)
HA: μ > 4.0 (alternative hypothesis)

So, the answer is (a).

The null hypothesis (H0) is the default assumption that there is no significant difference or effect between two groups or variables. In this case, the null hypothesis is that the average concentration of radon gas in the classroom is less than or equal to the safe level of 4pCi/L.

The alternative hypothesis (HA) is the opposite of the null hypothesis, and it represents the possibility of a significant difference or effect. In this case, the alternative hypothesis is that the average concentration of radon gas in the classroom is greater than the safe level of 4pCi/L.

Therefore, we want to test whether the data provides enough evidence to reject the null hypothesis in favor of the alternative hypothesis.

To perform this test, we can use a one-sample t-test, where we compare the sample mean (4.4pCi/L) to the hypothesized population mean (4pCi/L) while taking into account the sample standard deviation (1pCi/L) and the sample size (36).

If the calculated t-statistic is greater than the critical value from the t-distribution with 35 degrees of freedom (df = n-1), we can reject the null hypothesis and conclude that there is sufficient evidence to support the alternative hypothesis that the average concentration of radon gas in the classroom is greater than the safe level of 4pCi/L.

Visit  to know more about Null hypothesis:-

brainly.com/question/4436370

#SPJ11

Other Questions
ASAPPPPPP 100 POINTS GUYS CMON LAST HW QUESTIONTwo containers designed to hold water are side by side, both in the shape of a cylinder. Container A has a radius of 6 feet and a height of 9 feet. Container B has a radius of 5 feet and a height of 12 feet. Container A is full of water and the water is pumped into Container B until Container B is completely full.To the nearest tenth, what is the percent of Container A that is full after the pumping is complete? Analyze the diagram below and complete the instructions that follow.WX14Determine if the proportion is true. If it is not true, correct the error.A trueB.ZMark this and returnVXSave and ExitNext Individuals who are approaching termination for cause should be allowed to resign in lieu of discharge. (T/F) . Firms usually have two or more projects, and this collection of projects is referred to as _____. a. a portfoliob. initiationc. a programd. a stochastic model . Who is the man standing with the bag? What role is he playing? 6. Caleb wants to buy a skateboard that costs $73.56. If sales tax is 7%, how much would his total purchase be? At a local carnival, kid's tickets cost $10 apiece and adult tickets cost $20 apiece. These are the only two types of tickets sold. At the recent show, 29 total tickets were sold for a total revenue of $430. How many childrens tickets were sold? Suppose you draw 6 samples of marbles from a jar and get these results for red marbles. 26,25,25,30,28,28 What is the mean number of red marbles drawn? Choose the only one false statement! (no answer) It is possible to give a general expression for price elasticity, once we know the demand function The mid-point method implicity assumes that the demand curve between those points is non-linear The own price elasticity of demand shows the responsiveness of the quantity demanded to a change in price Loyalty programs can reduce the price sensitivity of the buyers. Read the paragraph.The schoolwide food drive is an important program that helps the community and instills a sense of responsibility in students. Last year, students collected over 600 canned goods and gave them to the Neighborhood House food pantry, which serves some of the neediest families in our community. Furthermore, many students said that helping with the drive was the first volunteer program they had ever participated in. Finally, without the student councils support, the food drive will not be officially promoted within school and will likely languish. Therefore, it is imperative that the student council continue to encourage students to volunteer for this important program.What would make the best claim for this written argument?I have volunteered for food drives and found the experience rewarding.Food drives will often collect hundreds of cans for needy people.The Neighborhood House is an important part of our community. The student council should continue to support the schoolwide food drive. Question 4 (1 point)Being __________ involves a situation where people are physically present butcommunicatively absent, according to McEwan (2015).Civil inattentionAbsent presentPresent absentO Micro-coordination WHat are some ways in which microorganisms acquire antimicrobial resistance? based on the assumption that decreasing the number or magnitude of risks will decrease the probability of an undesired event occuring; the application of selected interventions to control or reduce risk factors and minimize the incidence of associated disease and premature mortality What did Neil Armstrong earn a masters degree in from the University of Southern California? Read Odysseus' version of Circe's advice (on the previous page), then go back and re-readher advice about The Sirens. How does his advice to his men compare to Circe's originaladvice? The decisions of most administrative agencies are reviewed de novo on the record.A. TrueB. False If you omit the Gram's iodine step while performing the Gram stain, gram- positive cells will most likely be _____ in color. Which best explains the rise of river valley civilizations? Why is Enhanced 9-1-1 a benefit to the EMS system? The number of hours Nora feels she has left to live