Answer: NaHCO3 = Na2CO3 + H2O + CO2
A cylindrical rod of copper (E = 110 GPa) having a yield strength of 240 MPa is to be subjected
to a load of 6660 N. If the length of the rod is 380 mm, what must be the diameter to allow an
elongation of 0.50 mm?
Answer:
required diameter is 7.65 mm
Explanation:
Given the data in the question;
F = 6660 N
l₀ = 380 mm = 0.38 m
E = 110 GPa = 110 × 10⁹ N/m²
Δl = 0.50 mm = 0.0005 m
So, lets assume the deformation is elastic;
d₀ = √( [4l₀F] / [πEΔl] )
we substitute
d₀ = √( [4 × 0.38 × 6660] / [π × (110 × 10⁹) × 0.0005]] )
d₀ = √( 10123.2 / 172787595.947 )
d₀ = √( 5.85875 × 10⁻⁵ )
d₀ = 0.007654 m
d₀ = ( 0.007654 × 1000 )mm
d₀ = 7.65 mm
Therefore, required diameter is 7.65 mm
Which statements describe the types of energy emitted by the Sun? Check all that apply.
A. It emits most of its energy in gamma rays.
B. It emits all wavelengths in the electromagnetic spectrum.
C. It emits most of its energy as visible light.
D. Its peak wavelength is in the orange-yellow range.
E. It emits no X-rays or radio waves.
F. Its peak wavelength is in the yellow-green range.
Answer:
a,c,b
Explanation:
Alkenes provide many ways for incorporating oxygen atoms at specific locations in our molecule.
a. True
b. False
Answer:
True
Explanation:
Answer:
True
hope it is helpful to you
Which of the compounds shown are structural
isomers of this compound? Check all that apply.
A
B
С
D
Answer:
A & C
Explanation:
The next one is A Edge 2022
The compound which are the structural isomers of the given compound is compound A & C.
What are structural isomers?Structural isomers are those isomers in which which are having the same molecular formula but different structural structures.
Compound A: A is the structural isomer of the given compound as they both have same number of carbon and hydrogen atoms present in that.Compound B: B is not the structural isomer of the given ompound as they have not equal number of carbon and hydrogen atoms in it.Compound C: C is the structural isomer of the given compound as they both have same number of carbon and hydrogen atoms present in that.Compound D: D is not the structural isomer of the given ompound as they have not equal number of carbon and hydrogen atoms in it.Hence A & C are the structural isomers of given compound.
To know more about structural isomers, visit the below link:
https://brainly.com/question/26298707
What locations are likely to be affected by an earthquake or tsunami?
San Francisco, California, USA
San Francisco, Tokyo, and Asunción
Tokyo, Japan
None of the locations
Asunción, Paraguay, South America
Answer:
All the locations can suffer earthquakes and a handful like tokyo tsunami so the question is either or so the anwer would be all
Explanation:
Disadvantages of using cisplatin as an anti-cancer drug
Answer: The following side effects are common (occurring in greater than 30%) for patients taking Cisplatin:
Nausea and vomiting. Nausea may last up to 1 week after therapy.
Low blood counts.
Kidney toxicity.
Ototoxicity hearing loss, ringing in the ears.
Blood test abnormalities (low magnesium, low calcium, low potassium)
Explanation:
My mind is ok :')
The volume of a sample of carbon dioxide gas is 26.42 L at 73.0°C. What will its volume be at 92.0°C at constant pressure?
Answer:
[tex]V_2=27.87L[/tex]
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to solve this problem by using the Charles' law a directly proportional relationship to understand the volume-temperature behavior:
[tex]\frac{V_2}{T_2} =\frac{V_1}{T_1}[/tex]
Thus, we solve for the final volume, V2, and make sure the temperature are in Kelvin as shown below:
[tex]V_2 =\frac{V_1T_2}{T_1} \\\\V_2=\frac{26.42L(92+273.15)K}{(73+273.15)K} \\\\V_2=27.87L[/tex]
Regards!
Jim makes a mixture which contains 10 mg of salt, 30 mg of sand, and some iron filings. The total mass of the mixture is 100 mg
Which amount of iron filings does Jim use in the mixture?
A10
B30
C40
D60
Answer:
Amount of iron fillings in mixture = 60 mg
Explanation:
Given:
Total mass of mixture = 100 mg
Amount of salt in mixture = 10 mg
Amount of sand in mixture = 30 mg
Find:
Amount of iron fillings in mixture
Computation:
Using Law of Conservation of mass;
Total mass of mixture = Amount of salt in mixture + Amount of sand in mixture + Amount of iron fillings in mixture
100 = 10 + 30 + Amount of iron fillings in mixture
100 = 40 + Amount of iron fillings in mixture
Amount of iron fillings in mixture = 100 - 40
Amount of iron fillings in mixture = 60 mg
hydrogen chloride, hydrogen nitrate (v), sodium chloride, sodium hydroxide. Name a substance known as common salt
Answer:
C: Sodium chloride
Explanation:
Common salt is gotten when sodium atoms reacts with chlorine atoms in an exothermic reaction to form an ionic substance known as sodium chloride with the chemical formula NaCl.
Equation is;
2Na + Cl2 = 2NaCl
Looking at the options, the correct one is Sodium chloride.
Solid AgCl (Ksp = 1.8 X 10-10) is placed in a beaker of water. After a period of time, the Ag+ concentration is measured and found to be 2.5 X 10-7 M.
a) What is the concentration of Cl-?
b) Has the system reached equilibrium?
c) Will more AgCl dissolve?
Explanation:
a)
[tex]k _{sp} = [Ag {}^{ + } ][Cl {}^{ - } ] \\ but \: [Ag {}^{ + } ] = [Cl {}^{ - } ] \\ k _{sp} = [Ag {}^{ + } ] {}^{2} \\ [Ag {}^{ + } ] = \sqrt{k _{sp}} \\ = \sqrt{1.8 \times {10}^{ - 10} } \\ = 1.34 \times {10}^{ - 5} mol {dm}^{ - 3} [/tex]
b)
It has not reached equilibrium because the silver concentration is not yet equal to the value of Ksp.
c)
Yes it will dissolve in order to establish the equilibrium.
Help solve the types of chemical reactions
[tex]1) \: decomposition[/tex]
[tex]2) \:hydrocarbon \: combustion[/tex]
[tex]3) \: formation[/tex]
[tex]4) \: double - replacement[/tex]
[tex]5 \: double - replacement[/tex]
[tex]6) \: formation[/tex]
[tex]7)double \: - replacement[/tex]
[tex]8) \: double - replacement[/tex]
help i will mark brainliest
Answer:
Image A
Explanation:
The hemisphere experiences summer when it is tilted towards the sun. Image a has the northern hemisphere tilted towards the sun.
Answer:
image A
Explanation:
this is because the sun is hitting earth at a steep angle
ch3-co-ch2-ch2-ch3 IUpAC name
Answer:
2-pentanone.
Explanation:
Hello there!
In this case, for the given compound and, in agreement with the octet rule, it is possible to realize that the CO is actually C=O as shown below:
CH3 - C - CH2 - CH2 - CH3
||
O
Thus, since the C=O stands for the carbonyl group within the parent chain, we infer this is a ketone and more specifically 2-pentanone as it has five carbon atoms.
Regards!
Suppose you needed to explain the concept of the mole to a junior high school student. What would you tell them?
Answer:
Explanation:
duehgjvcujhyeq bvckjfdsaeb gjdksghUIBGREQWMNHGTRE BAGTFEQA
Which is true regarding pressure?
A.) at high pressure, the molecules are moving slower and therefore hitting other particles and the sides of a container less frequently
B.) pressure is calculated by combining the amount of space an entire object takes up.
C.) pressure is calculated by averaging the kinetic energy of all particles in a container
D.) at higher pressure indicates that particles are colliding with the walls of a container more frequently
Answer:
D
Explanation:
The higher a pressure in a system the faster the molecules within it move and collide with one another due to lack of space
please help- science
1. - new
2. full
3. first quarter
4. last quarter
Answer:
2. Full
Explanation:
A lunar eclipse occurs at a full moon when Earth is directly between the moon and the sun. During a lunar eclipse, Earth blocks sunlight from reaching the moon.
Hope this helps!!
Given the reaction: N2(g) +2O2(g) ⇌ 2NO2(g) The forward reaction is endothermic. Determine which of the following changes would result in more product being produced.
I. Increase NO2
II. Decrease O2
III. Add a catalyst
IV. Increase the temperature
V. Increase the pressure
A. I and II
B. II, III, and V
C. IV and V
D. II and IV
Answer:
C
Explanation:
increasing the temperature will favour the forward reaction therefore the reaction system will try to counteract that by producing more heat and NO2 therefore increases the amount of products produced
increasing the pressure will favour the forward reaction as it has more moles of substance therefore if the forward reaction is favored, more product will be produced
Answer:
C.) lV and V
Explanation:
I got it correct on founders edtell
help me with questions 6,11,15,16 and 17 please
ayúdame con las preguntas 6,11,15,16 y 17 por favor
PLEASE HELP!! NO LINKS PLEASE REAL ANSWER!!!!!
What will be volume of 20.0 g of CH4 gas at a pressure of 0.950 atm and temperature of 21.0 oc?Question 1 options:
A. 21.8 L
B. 31.8 L
C. 2.27 L
D. 4.27 L
What happens to iron when it melts?
O A. It undergoes a chemical change.
O B. It undergoes a physical change.
O c. Its atoms break apart and form new atoms.
O D. Its atoms combine and form new atoms.
Answer:
B. It undergoes a physical change.
Explanation:
Hello there!
In this case, since we know that chemical changes lead to the formation of new atoms and/or compounds due to the bonds rearrangement of the initial substances and the physical changes occur without changing the composition of the initial substances, we can infer that, since melting is a process that changes the phase of matter from solid to liquid without changing the identity of the initial substance, the answer to this question would be B. It undergoes a physical change. because the other options describe chemical changes.
Best regards!
Answer:
B. It undergoes a physical change.
Explanation:
At room temperature, the iron atoms are in an unusual loosely packed open arrangement; as iron is heated past 912 degrees Celsius, the atoms become more closely packed before loosening again at 1,394 degrees Celsius and ultimately melting at 1,538 degrees Celsius.
How many grams water will condense when 56,500 joules of energy is removed from steam at its boiling point
Answer:
Start your streak by answering any question. You'll get bonus points from day 2.
what is the difference between Earth and Exoplanets
Answer:
Earth has a strong gravitational field while exoplanets do not.
Explanation:
Rate Brainliest please
All of the planets in our solar system orbit around the Sun. Planets that orbit around other stars are called exoplanets.
The addition of dimethylglycoxime, H2C4H6O2N2, to a solution containing nickel(II) ion gives rise to a precipitate: Ni2 2H2C4H6O2N2 Ni(H2C4H6O2N2)2 2H If 0.15 g nickel alloy is treated with dimethylglycoxime and .175 mg nickel dimethylglycoxime is collected. Determine the mass and percent of nickel in the alloy.
Solution :
The balanced equation is :
[tex]$Ni^{2+}+2H_2C_4H_6O_2N_2 \rightarrow Ni(H_2C_4H_6O_2N_2)_2+2H^+$[/tex]
Molar mass 56.7 116 290.7
From the balanced equation,
2 mole
= 2 x 116 g of [tex]$H_2C_4H_6O_2N_2$[/tex] produces 1 mole = 290.7 g of nickel dimethylglycoxime
or 2 x 116 mg of [tex]$H_2C_4H_6O_2N_2$[/tex] produces 1 mole = 290.7 g of nickel dimethylglycoxime
0.175 mg of [tex]$H_2C_4H_6O_2N_2$[/tex] produces [tex]$\frac{0.175 \times 290.7}{2 \times 116}$[/tex] = 0.219 mg of nickel dimethylglycoxime
290.7 g of [tex]$Ni(H_2C_4H_6O_2N_2)_2$[/tex] contains 58.7 mg of Ni
0.219 mg of [tex]$Ni(H_2C_4H_6O_2N_2)_2$[/tex] contains [tex]$\frac{0.219 \times 58.7}{290.7} = 0.0443$[/tex] mg of Ni
So mass of nickel, m = 0.0443 mg = [tex]$0.0443 \times 10^{-3}$[/tex] g
Percent of Nickel in the alloy = [tex]$\frac{\text{mass of nickel}}{\text{mass of alloy}} \times 100$[/tex]
[tex]$=\frac{0.0443 \times 10^{-3}}{0.159}\times 100$[/tex]
= 0.03%
PLEASE HELP REAL ANSWER NO FILE. Part A
Electricity generated from any source comes with its own advantages and
disadvantages. So, no source of energy for generating electricity is perfect. However,
imagine that there is an energy source that perfectly meets the needs of society.
Describe this ideal source of energy. Include relevant factors such as cost, supply, safety,
reliability, and environmental impact
Answer:
Wind energy
Explanation:
An ideal source of energy needs to be reliable, cost effective, safe and must lead to almost zero adverse environmental impact.
Wind energy is energy obtained from air moving at high velocity. This energy is harvested using windmills which convert mechanical energy to electrical energy.
Wind is inexpensive because it occurs naturally. However, a large expanse of land is required in order to mount sufficient number of windmills that will generate enough electrical energy for practical purposes.
This method of electricity generation is safe and does not lead to any environmental hazard unlike the burning of fossil fuels, use of nuclear energy or loss of habitat due to hydroelectric power generation.
Compute the number of electrons that each lead atom donates, on average, to a bulk piece of lead metal. Room temperature data for lead: The conductivity of lead is 4.90 × 104 1/(Ω·m) The electron mobility of lead is 2.3 cm2/(V·s) The mass density of lead is 11.4 g/cm3 The atomic weight of lead is 207 g/mol
Answer:
4 electrons/atom
Explanation:
The conductivity of the lead σ = neμ where n = electron density, e = electron charge = 1.602 × 10⁻¹⁹ C and μ = electron mobility of lead = 2.3 cm²/(V·s) = 2.3 × 10⁻⁴ m²/(V.s)
Making n subject of the formula, we have
n = σ/eμ
Since σ = 4.90 × 10⁶ (Ω·m)⁻¹
Substituting the values of the variables into the equation, we have
n = σ/eμ
n = 4.90 × 10⁶ (Ω·m)⁻¹/(1.602 × 10⁻¹⁹ C × 2.3 × 10⁻⁴ m²/(V.s))
n = 4.90 × 10⁶ (Ω·m)⁻¹/(3.6846 × 10⁻²³ Cm²/(V.s))
n = 1.33 × 10²⁹ electrons/m³
We now find the number of moles of lead present in 1 m³ of lead.
So n' = ρ/M where ρ = density of lead = 11.4 g/cm³ = 11.4 g/cm³ × 10⁶ cm³/m³ = 11.4 × 10⁶ g/m³ and M = atomic weight of lead = 207 g/mol
So, n' = ρ/M
N = 11.4 × 10⁶ g/m³/207 g/mol
n' = 0.0551 × 10⁶ mol/m³
n' = 5.51 × 10⁴ mol/m³
Since n' = N/N' where N = number of atoms of lead in 1 m³ of lead and N = Avogadro's constant = 6.022 × 10²³ mol⁻¹
N = n'N' = 5.51 × 10⁴ mol/m³ × 6.022 × 10²³ mol⁻¹
N = 33.18 × 10²⁷ atoms/m³
N = 3.318 × 10²⁸ atoms/m³
So, the number of electron per atom is N" = n/N
= 1.33 × 10²⁹ electrons/m³ ÷ 3.318 × 10²⁸ atoms/m³
= 0.4 × 10¹ electrons/atom
= 4 electrons/atom
please help with Chem I DON'T HAVE ENOUGH TIME!
if a 119g sample of water was allowed to evaporate completely, what volume of water vapour would be produced in milliliters?
As 1 L = 1000 g
so 119 grams = 0.119000 L
Hope it is helpful to u
If yes then plz mark me brainlest
We are given:
Mass of water: 119 grams
We know that one mole of a gas occupies 22.4L of volume
Number of moles of water:
Number of moles = given mass / Molar mass
Number of moles = 119 / 18 [molar mass of water = 18 grams/mol]
Number of moles = 6.61 moles
Volume occupied:
Volume = number of moles * 22.4 L
Volume = 6.61 * 22.4
Volume = 148L
Volume (in mL) = 1.48 * 10⁻¹ mL
why do we have to write the background of the study
Answer:
Writing down background information can help you to remember what you learned and can be used for notes in the future when taking an assessment.
Explanation:
Can I get brainliest? It's for a challenge
The electrolyte magnesium chloride (MgCl2) will break up into how many individual particles in water (what is the i value)?
Answer:
Solid magnesium chloride is a non-conductor of electricity because the ions aren't free to move. However, it undergoes electrolysis when the ions become free on melting. Magnesium chloride dissolves in water to give a faintly acidic solution (pH = or 6).
One method of increasing the chances of particles colliding during a reaction is to...
1)decrease temperature
2) decrease concentration
3)increasing concentration
4)use a catalyst
Answer:
3
Explanation:
Increasing concentration
What are the substances that interact to form new substances in a chemical reaction called?
A. Reactants
B. Products
C. Chemicals
D. Substances
Answer:
A. Reactants
Explanation:
A chemical reaction is the process in which atoms present in the starting substances rearrange to give new chemical combinations present in the substances formed by the reaction. These starting substances of a chemical reaction are called the reactants, and the new substances that result are called the products.